The document provides instructions for disassembling and assembling a piston pump. It describes removing parts like the head, port plate, bearing cup, plug, sleeve, and pistons. It also details installing parts in the reverse order, including the rotating group, pins, bearing, pistons and retainer. Precautions are provided to prevent injury from spring forces. Tools required include a bearing puller, retaining ring pliers and driver group.
The document provides instructions for disassembling and assembling a piston pump. It outlines 30 steps for assembly, beginning with installing various bearings, seals, pistons, springs and other components in the proper order. Disassembly instructions describe 8 steps, including removing the head, port plate, bearings, pistons, pins and other parts. Safety warnings are provided to prevent injury from spring forces.
Caterpillar Cat 336D2 and 336D2 L Excavator (Prefix YCF) Service Repair Manua...fijsekkdmdm2w
The document provides instructions for disassembling and assembling a piston pump. It outlines 30 steps for assembly, beginning with installing various bearings, seals, pistons, springs and other components in the proper order. Disassembly instructions describe 8 steps, including removing the head, port plate, bearings, pistons, pins and other parts. Safety warnings are provided to prevent injury from spring forces.
Caterpillar Cat 336D2 L Excavator (Prefix YCF) Service Repair Manual (YCF0000...f8uesjdkdmdm
The document provides instructions for disassembling and assembling a piston pump. It outlines 30 steps for assembly, beginning with installing various bearings, seals, pistons, springs and other components in the proper order. Disassembly instructions describe 8 steps, including removing the head, port plate, bearings, pistons, pins and other parts. Safety warnings are provided to prevent injury from spring forces.
The document provides instructions for disassembling and assembling a piston pump used in excavator models 336D2 and 336D2 L. The disassembly process involves removing 30 parts in 7 steps, using various tools. The assembly process reinstalls the parts in 30 steps, ensuring proper cleaning, heating and cooling of parts, and using tools to set clearances and install retaining rings. Safety precautions are provided to prevent injury from spring-loaded parts.
Caterpillar cat 336 d2 l excavator (prefix ycf) service repair manual (ycf000...ikdkdmddm
The document provides instructions for disassembling and assembling a piston pump used in excavator models 336D2 and 336D2 L. The disassembly process involves removing 30 parts in 7 steps, using various tools. The assembly process reinstalls the parts in 30 steps, ensuring proper cleaning, heating and cooling of parts, and using tools to set clearances and install retaining rings. Safety precautions are provided to prevent injury from spring-loaded parts.
Caterpillar Cat 336D2 L Excavator (Prefix YCF) Service Repair Manual (YCF0000...f8uejkkdmdm8u
The document provides instructions for disassembling and assembling a piston pump. It outlines 30 steps for assembly, beginning with installing various bearings, seals, pistons, springs and other components in the proper order. Disassembly instructions describe 8 steps, including removing the head, port plate, bearings, pistons, pins and other parts. Safety warnings are provided to prevent injury from spring forces.
The document provides instructions for disassembling and assembling a piston pump. It outlines 30 steps for assembly, beginning with installing various bearings, seals, pistons, springs and other components in the proper order. Disassembly instructions describe 8 steps, including removing the head, port plate, bearings, pistons, pins and other parts. Safety warnings are provided to prevent injury from spring forces.
Caterpillar Cat 336D2 L Excavator (Prefix YCF) Service Repair Manual (YCF0000...f8uejkkdmdm8u
The document provides instructions for disassembling and assembling a piston pump. It outlines 30 steps for assembly, beginning with installing various bearings, seals, pistons, springs and other components in the proper order. Disassembly instructions describe 8 steps, including removing the head, port plate, bearings, pistons, pins and other parts. Safety warnings are provided to prevent injury from spring forces.
The document provides instructions for disassembling and assembling a piston pump. It outlines 30 steps for assembly, beginning with installing various bearings, seals, pistons, springs and other components in the proper order. Disassembly instructions describe 8 steps, including removing the head, port plate, bearings, pistons, pins and other parts. Safety warnings are provided to prevent injury from spring forces.
Caterpillar Cat 336D2 and 336D2 L Excavator (Prefix YCF) Service Repair Manua...fijsekkdmdm2w
The document provides instructions for disassembling and assembling a piston pump. It outlines 30 steps for assembly, beginning with installing various bearings, seals, pistons, springs and other components in the proper order. Disassembly instructions describe 8 steps, including removing the head, port plate, bearings, pistons, pins and other parts. Safety warnings are provided to prevent injury from spring forces.
Caterpillar Cat 336D2 L Excavator (Prefix YCF) Service Repair Manual (YCF0000...f8uesjdkdmdm
The document provides instructions for disassembling and assembling a piston pump. It outlines 30 steps for assembly, beginning with installing various bearings, seals, pistons, springs and other components in the proper order. Disassembly instructions describe 8 steps, including removing the head, port plate, bearings, pistons, pins and other parts. Safety warnings are provided to prevent injury from spring forces.
The document provides instructions for disassembling and assembling a piston pump used in excavator models 336D2 and 336D2 L. The disassembly process involves removing 30 parts in 7 steps, using various tools. The assembly process reinstalls the parts in 30 steps, ensuring proper cleaning, heating and cooling of parts, and using tools to set clearances and install retaining rings. Safety precautions are provided to prevent injury from spring-loaded parts.
Caterpillar cat 336 d2 l excavator (prefix ycf) service repair manual (ycf000...ikdkdmddm
The document provides instructions for disassembling and assembling a piston pump used in excavator models 336D2 and 336D2 L. The disassembly process involves removing 30 parts in 7 steps, using various tools. The assembly process reinstalls the parts in 30 steps, ensuring proper cleaning, heating and cooling of parts, and using tools to set clearances and install retaining rings. Safety precautions are provided to prevent injury from spring-loaded parts.
Caterpillar Cat 336D2 L Excavator (Prefix YCF) Service Repair Manual (YCF0000...f8uejkkdmdm8u
The document provides instructions for disassembling and assembling a piston pump. It outlines 30 steps for assembly, beginning with installing various bearings, seals, pistons, springs and other components in the proper order. Disassembly instructions describe 8 steps, including removing the head, port plate, bearings, pistons, pins and other parts. Safety warnings are provided to prevent injury from spring forces.
The document provides instructions for disassembling and assembling a piston pump. It outlines 30 steps for assembly, beginning with installing various bearings, seals, pistons, springs and other components in the proper order. Disassembly instructions describe 8 steps, including removing the head, port plate, bearings, pistons, pins and other parts. Safety warnings are provided to prevent injury from spring forces.
Caterpillar Cat 336D2 L Excavator (Prefix YCF) Service Repair Manual (YCF0000...f8uejkkdmdm8u
The document provides instructions for disassembling and assembling a piston pump. It outlines 30 steps for assembly, beginning with installing various bearings, seals, pistons, springs and other components in the proper order. Disassembly instructions describe 8 steps, including removing the head, port plate, bearings, pistons, pins and other parts. Safety warnings are provided to prevent injury from spring forces.
The document provides instructions for disassembling and assembling a piston pump used in excavator models 336D2 and 336D2 L. The disassembly process involves removing 30 parts in 7 steps, using various tools. The assembly process reinstalls the parts in 30 steps, ensuring proper cleaning, heating and cooling of parts, and using tools to set clearances and install retaining rings. Safety precautions are provided to prevent injury from spring-loaded parts.
Caterpillar Cat 336D2 L Excavator (Prefix YCF) Service Repair Manual (YCF0000...fujjekdmdmd
The document provides instructions for disassembling and assembling a piston pump. It outlines 30 steps for assembly, beginning with installing various bearings, seals, pistons, springs and other components in the proper order. Disassembly instructions describe 8 steps, including removing the head, port plate, bearings, pistons, pins and other parts. Safety warnings are provided to prevent injury from spring forces.
Caterpillar Cat 336D2 L Excavator (Prefix YCF) Service Repair Manual (YCF0000...8ufjsekddm8u
The document provides instructions for disassembling and assembling a piston pump. It outlines 30 steps for assembly, beginning with installing various bearings, seals, pistons, springs and other components in the proper order. Disassembly instructions describe 8 steps, including removing the head, port plate, bearings, pistons, pins and other parts. Safety warnings are provided to prevent injury from spring forces.
The document provides instructions for disassembling and assembling a piston pump. It outlines 30 steps for assembly, beginning with installing various bearings, seals, pistons, springs and other components into the pump housing in the proper order. Disassembly instructions describe 8 steps for removing these components in reverse order, noting any safety precautions for spring loaded parts. Tools required are also listed.
Caterpillar Cat 336D2 and 336D2 L Excavator (Prefix YCF) Service Repair Manua...fujkskemdmdm4r
The document provides instructions for disassembling and assembling a piston pump. It outlines 30 steps for assembly, beginning with installing various bearings, seals, pistons, springs and other components in the proper order. Disassembly instructions describe 8 steps, including removing the head, port plate, bearings, pistons, pins and other internal components. Safety warnings are provided to prevent injury from spring forces.
Caterpillar Cat 336D2 and 336D2 L Excavator (Prefix YCF) Service Repair Manua...ze3xiandiao
The document provides instructions for disassembling and assembling a piston pump. It outlines 30 steps for assembly, beginning with installing various bearings, seals, pistons, springs and other components in the proper order. Disassembly instructions describe 8 steps, including removing the head, port plate, bearings, pistons, pins and other parts. Safety warnings are provided to prevent injury from spring forces.
Caterpillar Cat 336D2 L Excavator (Prefix YCF) Service Repair Manual (YCF0000...f7usuejkdkddm3
The document provides instructions for disassembling and assembling a piston pump used in excavator models 336D2 and 336D2 L. The disassembly process involves removing 30 parts in 7 steps, using various tools. The assembly process reinstalls the parts in 30 steps, ensuring proper cleaning, heating and cooling of parts, and using tools to set clearances and install retaining rings. Safety precautions are provided to prevent injury from spring-loaded parts.
The document provides step-by-step instructions to disassemble the output transfer gears of a 745C Articulated Truck. It lists 49 steps to remove components like the output transfer gears case, yokes, seals, bearings, gears, shafts, and seals. Special tools are required to remove some components and safety precautions are provided given the heavy weight of some parts that need to be lifted.
The document provides instructions for removing and installing various powertrain components on a 745C articulated truck, including:
1) Removing and installing the torque converter, which requires using lifting tools and weighs approximately 95 kg.
2) Removing and installing the transmission scavenge pump, which involves disconnecting hoses and removing mounting bolts.
3) Removing and installing the transmission oil filter, which requires releasing system pressure and removing mounting bolts and harnesses.
The document provides instructions for assembling and disassembling the piston pump used in Caterpillar 745 articulated trucks. The assembly instructions include installing various seals, springs, and other components in the proper order and orientation. Disassembly is performed by removing these same components in the reverse order. Pictures and diagrams accompany the text to illustrate each step. Safety warnings are provided to prevent injury from released spring forces during disassembly.
The document provides instructions for removing and installing a flywheel housing on a Caterpillar 740B Ejector Articulated Truck powered by a C15 engine. The removal procedure involves removing bolts and other components to detach the housing. For installation, the procedure describes cleaning parts, applying sealant, positioning seals and gears, and torquing bolts to specified values. Additional components like the rear power take-off must be removed before and reinstalled after the flywheel housing job.
This document provides disassembly instructions for the output transfer gears of a 740B articulated truck. It lists over 50 steps to remove various components such as planetary gears, shafts, seals, bearings, and housings. Special tools are required to remove some parts, and components can weigh up to 630 kg so lifting devices are needed. Detailed illustrations accompany each step to show the specific components and fasteners.
This document provides instructions for removing the camshaft from a Caterpillar C15 engine. The procedure involves:
1. Removing components like the camshaft gear and rocker arms
2. Removing bolts and plates connecting the camshaft to hold it in place
3. Installing tooling to support the camshaft as it is slid out of the engine, being careful not to damage surfaces
4. Slowly sliding the camshaft forward and out of the engine using hooks for support, keeping it level throughout removal
The document provides instructions for installing the front cover on a C15 engine. It describes:
1. Cleaning the front housing sealing surface.
2. Installing a new seal into the front cover.
3. Positioning the front cover with installed seal on the front housing using alignment studs.
4. Installing spacers, nuts, and button head screws and tightening to the specified torque.
The document provides instructions for disassembling and assembling components of the gear pump and piston pump used in Caterpillar 740 GC articulated trucks. The gear pump section describes removing and installing the gear pump, housing, seals, gears, and other internal parts. The piston pump section outlines removing the pump head, springs, spools, pistons, bearings, and separating the rotating group from the pump housing. Detailed illustrations accompany each step to ensure safe and proper disassembly and reassembly of the pumps.
This document provides instructions for installing and removing the ejector blade carriage on a 740 Ejector Articulated Truck. It describes using lifting equipment and blocking to safely handle the 210 kg carriage component. The 10-step removal procedure includes loosening lock rings, bolts, and other hardware to separate the carriage from the machine. The 11-step installation procedure specifies replacing hardware in reverse order and adjusting components like floor rollers. Cleaning parts and noting shim positions are emphasized for correct reassembly.
The document provides instructions for disassembling a gear pump used in Caterpillar 740 articulated trucks. The disassembly procedure involves:
1. Removing fittings from the pump body and O-rings from the fittings.
2. Removing bolts securing a flange to the pump body and an O-ring from the flange.
3. Using retaining ring pliers to remove two rings from the flange and a lip seal from the flange.
The document provides instructions for removing and installing a steering cylinder on a 740 articulated truck. It lists the required tools which include chocks, a hydraulic cylinder tool, and washers. The steps include chocking the wheels, disconnecting grease lines if needed, and using a tool and washers to secure the rod end of the cylinder before removing mounting bolts and taking it off the vehicle. Reinstallation follows the removal steps in reverse order.
The document provides instructions for removing and installing various engine components on a Caterpillar C15 engine, including:
1. Removing and installing the rear power take-off, which involves installing bushings and covers in the flywheel housing.
2. Removing and installing the vibration damper and pulley, which requires using tools to lift and position the components.
3. Procedures for removing and installing the crankshaft front seal, which includes using a slide hammer and seal installer tool.
The document contains detailed step-by-step instructions accompanied by illustrations and notes about keeping components clean and applying anti-seize compound as needed.
This document provides instructions for removing and installing various components of a C13 engine, including:
- The flywheel housing
- The vibration damper and pulley
- The crankshaft front seal
- The front cover
- The front gear group
- The front housing
- Accessory drive brackets and pulleys
- The fumes disposal filter
- The valve mechanism cover
The procedures include lists of required tools and step-by-step instructions for each removal and installation. Illustrations are provided to supplement the text instructions.
This document provides instructions for removing and installing various components of the rear gear group and flywheel on a Caterpillar 730C2 Ejector Articulated Truck powered by a C13 engine. The removal procedure includes removing the electric starting motor, flywheel, rear crankshaft seal, gears, bushings, bearings and covers. The installation procedure provides steps to install these components in reverse order and includes cleaning and applying threadlocker to bolts. Tools required are also listed.
The document provides instructions for servicing components of the power train for a 730C2 articulated truck. It includes procedures for removing and installing the torque converter housing, relief valve, accessory drive, idler gear, and pump drive. The pump drive removal procedure involves detaching the torque converter housing and shield assembly, then removing bolts and the pump drive unit. The pump drive disassembly requires removing manifold bolts and parts, races, and the carrier assembly.
More Related Content
Similar to Caterpillar Cat 336D L and 336D LN Excavator (Prefix PPN) Service Repair Manual Instant Download.pdf
The document provides instructions for disassembling and assembling a piston pump used in excavator models 336D2 and 336D2 L. The disassembly process involves removing 30 parts in 7 steps, using various tools. The assembly process reinstalls the parts in 30 steps, ensuring proper cleaning, heating and cooling of parts, and using tools to set clearances and install retaining rings. Safety precautions are provided to prevent injury from spring-loaded parts.
Caterpillar Cat 336D2 L Excavator (Prefix YCF) Service Repair Manual (YCF0000...fujjekdmdmd
The document provides instructions for disassembling and assembling a piston pump. It outlines 30 steps for assembly, beginning with installing various bearings, seals, pistons, springs and other components in the proper order. Disassembly instructions describe 8 steps, including removing the head, port plate, bearings, pistons, pins and other parts. Safety warnings are provided to prevent injury from spring forces.
Caterpillar Cat 336D2 L Excavator (Prefix YCF) Service Repair Manual (YCF0000...8ufjsekddm8u
The document provides instructions for disassembling and assembling a piston pump. It outlines 30 steps for assembly, beginning with installing various bearings, seals, pistons, springs and other components in the proper order. Disassembly instructions describe 8 steps, including removing the head, port plate, bearings, pistons, pins and other parts. Safety warnings are provided to prevent injury from spring forces.
The document provides instructions for disassembling and assembling a piston pump. It outlines 30 steps for assembly, beginning with installing various bearings, seals, pistons, springs and other components into the pump housing in the proper order. Disassembly instructions describe 8 steps for removing these components in reverse order, noting any safety precautions for spring loaded parts. Tools required are also listed.
Caterpillar Cat 336D2 and 336D2 L Excavator (Prefix YCF) Service Repair Manua...fujkskemdmdm4r
The document provides instructions for disassembling and assembling a piston pump. It outlines 30 steps for assembly, beginning with installing various bearings, seals, pistons, springs and other components in the proper order. Disassembly instructions describe 8 steps, including removing the head, port plate, bearings, pistons, pins and other internal components. Safety warnings are provided to prevent injury from spring forces.
Caterpillar Cat 336D2 and 336D2 L Excavator (Prefix YCF) Service Repair Manua...ze3xiandiao
The document provides instructions for disassembling and assembling a piston pump. It outlines 30 steps for assembly, beginning with installing various bearings, seals, pistons, springs and other components in the proper order. Disassembly instructions describe 8 steps, including removing the head, port plate, bearings, pistons, pins and other parts. Safety warnings are provided to prevent injury from spring forces.
Caterpillar Cat 336D2 L Excavator (Prefix YCF) Service Repair Manual (YCF0000...f7usuejkdkddm3
The document provides instructions for disassembling and assembling a piston pump used in excavator models 336D2 and 336D2 L. The disassembly process involves removing 30 parts in 7 steps, using various tools. The assembly process reinstalls the parts in 30 steps, ensuring proper cleaning, heating and cooling of parts, and using tools to set clearances and install retaining rings. Safety precautions are provided to prevent injury from spring-loaded parts.
Similar to Caterpillar Cat 336D L and 336D LN Excavator (Prefix PPN) Service Repair Manual Instant Download.pdf (7)
The document provides step-by-step instructions to disassemble the output transfer gears of a 745C Articulated Truck. It lists 49 steps to remove components like the output transfer gears case, yokes, seals, bearings, gears, shafts, and seals. Special tools are required to remove some components and safety precautions are provided given the heavy weight of some parts that need to be lifted.
The document provides instructions for removing and installing various powertrain components on a 745C articulated truck, including:
1) Removing and installing the torque converter, which requires using lifting tools and weighs approximately 95 kg.
2) Removing and installing the transmission scavenge pump, which involves disconnecting hoses and removing mounting bolts.
3) Removing and installing the transmission oil filter, which requires releasing system pressure and removing mounting bolts and harnesses.
The document provides instructions for assembling and disassembling the piston pump used in Caterpillar 745 articulated trucks. The assembly instructions include installing various seals, springs, and other components in the proper order and orientation. Disassembly is performed by removing these same components in the reverse order. Pictures and diagrams accompany the text to illustrate each step. Safety warnings are provided to prevent injury from released spring forces during disassembly.
The document provides instructions for removing and installing a flywheel housing on a Caterpillar 740B Ejector Articulated Truck powered by a C15 engine. The removal procedure involves removing bolts and other components to detach the housing. For installation, the procedure describes cleaning parts, applying sealant, positioning seals and gears, and torquing bolts to specified values. Additional components like the rear power take-off must be removed before and reinstalled after the flywheel housing job.
This document provides disassembly instructions for the output transfer gears of a 740B articulated truck. It lists over 50 steps to remove various components such as planetary gears, shafts, seals, bearings, and housings. Special tools are required to remove some parts, and components can weigh up to 630 kg so lifting devices are needed. Detailed illustrations accompany each step to show the specific components and fasteners.
This document provides instructions for removing the camshaft from a Caterpillar C15 engine. The procedure involves:
1. Removing components like the camshaft gear and rocker arms
2. Removing bolts and plates connecting the camshaft to hold it in place
3. Installing tooling to support the camshaft as it is slid out of the engine, being careful not to damage surfaces
4. Slowly sliding the camshaft forward and out of the engine using hooks for support, keeping it level throughout removal
The document provides instructions for installing the front cover on a C15 engine. It describes:
1. Cleaning the front housing sealing surface.
2. Installing a new seal into the front cover.
3. Positioning the front cover with installed seal on the front housing using alignment studs.
4. Installing spacers, nuts, and button head screws and tightening to the specified torque.
The document provides instructions for disassembling and assembling components of the gear pump and piston pump used in Caterpillar 740 GC articulated trucks. The gear pump section describes removing and installing the gear pump, housing, seals, gears, and other internal parts. The piston pump section outlines removing the pump head, springs, spools, pistons, bearings, and separating the rotating group from the pump housing. Detailed illustrations accompany each step to ensure safe and proper disassembly and reassembly of the pumps.
This document provides instructions for installing and removing the ejector blade carriage on a 740 Ejector Articulated Truck. It describes using lifting equipment and blocking to safely handle the 210 kg carriage component. The 10-step removal procedure includes loosening lock rings, bolts, and other hardware to separate the carriage from the machine. The 11-step installation procedure specifies replacing hardware in reverse order and adjusting components like floor rollers. Cleaning parts and noting shim positions are emphasized for correct reassembly.
The document provides instructions for disassembling a gear pump used in Caterpillar 740 articulated trucks. The disassembly procedure involves:
1. Removing fittings from the pump body and O-rings from the fittings.
2. Removing bolts securing a flange to the pump body and an O-ring from the flange.
3. Using retaining ring pliers to remove two rings from the flange and a lip seal from the flange.
The document provides instructions for removing and installing a steering cylinder on a 740 articulated truck. It lists the required tools which include chocks, a hydraulic cylinder tool, and washers. The steps include chocking the wheels, disconnecting grease lines if needed, and using a tool and washers to secure the rod end of the cylinder before removing mounting bolts and taking it off the vehicle. Reinstallation follows the removal steps in reverse order.
The document provides instructions for removing and installing various engine components on a Caterpillar C15 engine, including:
1. Removing and installing the rear power take-off, which involves installing bushings and covers in the flywheel housing.
2. Removing and installing the vibration damper and pulley, which requires using tools to lift and position the components.
3. Procedures for removing and installing the crankshaft front seal, which includes using a slide hammer and seal installer tool.
The document contains detailed step-by-step instructions accompanied by illustrations and notes about keeping components clean and applying anti-seize compound as needed.
This document provides instructions for removing and installing various components of a C13 engine, including:
- The flywheel housing
- The vibration damper and pulley
- The crankshaft front seal
- The front cover
- The front gear group
- The front housing
- Accessory drive brackets and pulleys
- The fumes disposal filter
- The valve mechanism cover
The procedures include lists of required tools and step-by-step instructions for each removal and installation. Illustrations are provided to supplement the text instructions.
This document provides instructions for removing and installing various components of the rear gear group and flywheel on a Caterpillar 730C2 Ejector Articulated Truck powered by a C13 engine. The removal procedure includes removing the electric starting motor, flywheel, rear crankshaft seal, gears, bushings, bearings and covers. The installation procedure provides steps to install these components in reverse order and includes cleaning and applying threadlocker to bolts. Tools required are also listed.
The document provides instructions for servicing components of the power train for a 730C2 articulated truck. It includes procedures for removing and installing the torque converter housing, relief valve, accessory drive, idler gear, and pump drive. The pump drive removal procedure involves detaching the torque converter housing and shield assembly, then removing bolts and the pump drive unit. The pump drive disassembly requires removing manifold bolts and parts, races, and the carrier assembly.
The document provides instructions for removing and disassembling a torque converter from a Caterpillar 730C2 articulated truck. It describes 18 steps to disassemble the torque converter and 19 steps to reassemble it. Tools required include an adapter plate, engine stand, oil drain cart, and link brackets. Safety precautions are provided to contain fluids and protect from spring forces.
This document provides removal and installation instructions for various diesel exhaust fluid (DEF) system components on a Caterpillar 730C Ejector articulated truck. It describes how to remove and install the DEF tank, pump, injector, electronic control unit, and various solenoid valves. The instructions include illustrations showing the component locations and torque specifications for reinstalling components.
This document provides instructions for removing and installing an engine from a 730C Ejector Articulated Truck. It outlines 25 steps to remove the engine, including disconnecting wiring harnesses, hoses, brackets and removing bolts. It then states the installation is done in reverse order. A second document provides instructions for releasing pressure from the hydraulic system before disassembly, including moving components and removing filler caps. A third document outlines 14 steps to disassemble a torque converter, including removing housing, rings, plates and discs.
The document provides instructions for disassembling and assembling the torque converter of a 730C articulated truck. It describes 18 steps to disassemble the torque converter by removing housing assemblies, bearings, plates, discs, seals, and other components. It then describes 13 steps to assemble the torque converter by installing these same components in the reverse order, taking care to keep parts clean and follow procedures carefully due to parts that are spring loaded. Special tools are required for many steps, and safety precautions are provided.
This document provides assembly instructions for a torque converter in a 730 articulated truck. It lists 43 steps to assemble the torque converter components in the proper order, attaching seals, bearings, housings and other parts. It also provides illustrations matching each step. The final steps are to connect the assembled torque converter to the planetary transmission and lists the starting steps to remove the torque converter housing.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D L EXCAVATOR PPN
Configuration: 336D L & 336D LN Excavators PPN00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02732015
Piston Pump (Hydraulic Fan) - Assemble
SMCS - 1387-016-QP; 5070-016-HFN
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
B 1P-1857 Retaining Ring Pliers 1
D 8T-5096 Dial Indicator Gp 1
Illustration 1 g01212915
1. Lower the temperature of bearing cup (49). Install bearing cup (49).
1/11
336D L & 336D LN Excavators PPN00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/18
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 2 g01212913
2. Install lip seal (48).
3. Use Tooling (B) in order to install retaining ring (47).
Illustration 3 g01213404
4. Raise the temperature of bearing cone (46).
5. Install bearing cone (46) onto shaft (45).
Illustration 4 g01213405
6. Install bearing cone (46), shaft (45), and bearing cone (31).
2/11
336D L & 336D LN Excavators PPN00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/18
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 5 g01213407
7. Lower the temperature of bearing cone (26). Install bearing cone (26).
Illustration 6 g01212900
8. Position head (23) onto the housing.
9. Install bolts (22).
Illustration 7 g01213409
10. Use Tooling (D) in order to determine the end play of shaft (45).
3/11
336D L & 336D LN Excavators PPN00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/18
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 11 g01212910
14. Install swashplate (43).
Illustration 12 g01373818
15. Install shim (40), spring (41), and shim (42) to barrel (38).
Illustration 13 g01212908
5/11
336D L & 336D LN Excavators PPN00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/18
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
16. Use Tooling (A), Tooling (B), and a suitable press in order to install retaining ring (39) into
barrel (38).
Illustration 14 g01212907
17. Install pins (37) into barrel (38).
Illustration 15 g01212906
18. Install bearing (36), retainer (35), and pistons (34).
6/11
336D L & 336D LN Excavators PPN00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/18
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 16 g01212905
19. Install rotating group (32) and shim (33).
Note: Shim thickness was determined on Step 9.
Illustration 17 g01212904
20. Install bearing cone (31).
Illustration 18 g01212903
21. Install piston (30).
7/11
336D L & 336D LN Excavators PPN00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/18
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 19 g01212902
22. Install spring (27), piston (29), and O-ring seal (28).
Illustration 20 g01213436
23. Install O-ring seals (24) and port plate (25).
Illustration 21 g01212900
8/11
336D L & 336D LN Excavators PPN00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/18
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
24. Install head (23) and bolts (22).
Illustration 22 g01212898
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
25. Install spool (15), poppet (16), spring (17), spring (18), shim (19), O-ring seal (20), and
housing (21) into housing (2).
26. Install retainer (7), spring (8), retainer (9), spool (10), O-ring seal (12), backup ring (11), O-
ring seal (13), and cartridge (14).
27. Install screw (6) into housing (2).
9/11
336D L & 336D LN Excavators PPN00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/18
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 23 g01212897
28. Install coil (4) and nut (5).
Illustration 24 g01212896
29. Install O-ring seals (3).
Illustration 25 g01212895
30. Install controller (2) and bolts (1).
End By:
10/11
336D L & 336D LN Excavators PPN00001-UP (MACHINE) POWERED BY C9 E...
2020/5/18
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. a. Install the piston pump. Refer to Disassembly and Assembly, "Piston Pump (Hydraulic Fan)
- Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon May 18 17:38:47 UTC+0800 2020
11/11
336D L & 336D LN Excavators PPN00001-UP (MACHINE) POWERED BY C9 E...
2020/5/18
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D L EXCAVATOR PPN
Configuration: 336D L & 336D LN Excavators PPN00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02424411
Piston Pump (Hydraulic Fan) - Install
SMCS - 1387-012-QP; 5070-012-HFN
Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned
in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts.
Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are
worn or damaged, use new parts for replacement.
Illustration 1 g01211400
1. Position piston pump (7) and install bolts (6).
2. Connect harness assembly (5).
3. Connect hose assemblies (3) and (4).
1/2
336D L & 336D LN Excavators PPN00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/18
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 2 g01211399
4. Connect hose assembly (2).
Illustration 3 g01206719
5. Close door (1).
6. Fill the hydraulic system with oil. Refer to Operation and Maintenance Manual, "Refill
Capacities".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon May 18 17:39:43 UTC+0800 2020
2/2
336D L & 336D LN Excavators PPN00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/18
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D L EXCAVATOR PPN
Configuration: 336D L & 336D LN Excavators PPN00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02415451
Piston Motor (Hydraulic Fan) - Remove
SMCS - 1386-011-QP; 5058-011-FM
Removal Procedure
Start By:
a. Remove the fan. Refer to Disassembly and Assembly, "Fan - Remove".
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the
component should be thoroughly cleaned. This will help to prevent dirt from entering the internal
mechanism.
Illustration 1 g01207415
1. Bend locking tabs (1) backward.
2. Remove bolts (2) and hub (3).
1/2
336D L & 336D LN Excavators PPN00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/18
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 2 g01207416
3. Use a suitable lifting device to position fan motor assembly (4) onto suitable cribbing. The
weight of fan motor assembly (4) is approximately 68 kg (150 lb).
Illustration 3 g01207418
4. Attach a suitable lifting device to piston motor (5). The weight of piston motor (5) is
approximately 23 kg (50 lb).
5. Remove bolts (6) and fan motor (5).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon May 18 17:40:40 UTC+0800 2020
2/2
336D L & 336D LN Excavators PPN00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/18
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D L EXCAVATOR PPN
Configuration: 336D L & 336D LN Excavators PPN00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02415272
Piston Motor (Hydraulic Fan) - Disassemble
SMCS - 1386-015-QP; 5058-015-FM; 5058-015-HFN
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9S-9152 Bearing Puller Gp 1
B 1P-1861 Retaining Ring Pliers 1
C 1P-0510 Driver Gp 1
Start By:
a. Remove the piston motor. Refer to Disassembly and Assembly, "Piston Motor (Hydraulic
Fan) - Remove".
1/7
336D L & 336D LN Excavators PPN00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/18
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 1 g01207275
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
1. Remove bolts (1) and head (2).
Illustration 2 g01207276
2. Remove O-ring seal (3), port plate (4), and bearing cup (5).
Illustration 3 g01207278
2/7
336D L & 336D LN Excavators PPN00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/18
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
3. Remove plug (6), sleeve (7), poppet (8), spring (9), poppet (10), and O-ring seal (11).
Illustration 4 g01207279
4. Remove bearing cone (12).
Illustration 5 g01207280
5. Remove shim (13) and rotating group (14).
3/7
336D L & 336D LN Excavators PPN00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/18
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 9 g01207284
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
9. Use Tooling (C) and Tooling (B) in order to remove retaining ring (19).
10. Remove shim (23), spring (22), and shim (21).
Illustration 10 g01207285
11. Remove swashplate (24) and shaft (25).
5/7
336D L & 336D LN Excavators PPN00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/18
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 11 g01207287
12. Use Tooling (A) in order to remove bearing cone (26) from shaft (25).
Illustration 12 g01207286
13. Use Tooling (C) in order to remove retaining ring (27).
14. Remove lip seal (28).
Illustration 13 g01207288
15. Remove bearing cup (29).
6/7
336D L & 336D LN Excavators PPN00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/18
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D L EXCAVATOR PPN
Configuration: 336D L & 336D LN Excavators PPN00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02415273
Piston Motor (Hydraulic Fan) - Assemble
SMCS - 1386-016-QP; 5058-016-FM; 5058-016-HFN
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
B 1P-1861 Retaining Ring Pliers 1
C 1P-0510 Driver Gp 1
Illustration 1 g01207288
1. Install bearing cup (29).
1/7
336D L & 336D LN Excavators PPN00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/18
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Illustration 2 g01207286
2. Install lip seal (28).
3. Use Tooling (C) in order to install retaining ring (27).
Illustration 3 g01207624
4. Raise the temperature of bearing cone (26).
5. Install bearing cone (26) onto shaft (25).
Illustration 4 g01207285
6. Install shaft (25) and swashplate (24).
2/7
336D L & 336D LN Excavators PPN00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/18
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Illustration 5 g01207283
Illustration 6 g01207284
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
7. Install shim (21), spring (22), and shim (23).
8. Use Tooling (C) and Tooling (B) in order to install retaining ring (19).
3/7
336D L & 336D LN Excavators PPN00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/18
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Illustration 7 g01207282
9. Install pins (18).
Illustration 8 g01207281
10. Install bearing (17).
11. Install pistons (15) and retainer (16).
Illustration 9 g01207280
12. Install rotating group (14) and shim (13).
4/7
336D L & 336D LN Excavators PPN00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/18
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. Suggest:
If the above button click is invalid.
Please download this document
first, and then click the above link
to download the complete manual.
Thank you so much for reading
28. Illustration 10 g01207279
13. Install bearing cone (12).
Illustration 11 g01207278
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
14. Install O-ring seal (11), poppet (10), spring (9), poppet (8), sleeve (7), and plug (6).
5/7
336D L & 336D LN Excavators PPN00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/18
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...