SlideShare a Scribd company logo
1 of 23
Download to read offline
Service Repair Manual
Models
320D RR and 320D LRR
Excavator
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 320D RR EXCAVATOR GKL
Configuration: 320D RR & 320D LRR Excavators GKL00001-UP (MACHINE) POWERED BY 3066 Engine
Disassembly and Assembly
3064 and 3066 Engines for Caterpillar Built Machines
Media Number -SENR5553-10 Publication Date -01/05/2012 Date Updated -15/05/2012
i01576856
Crankshaft - Remove
SMCS - 1202-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 6V-9120 Socket (1)
1
( 1 )
Tool (A) is a 46 mm socket.
Start By:
A. Remove the front housing. Refer to Disassembly and Assembly, "Housing (Front) -
Remove".
B. Remove the crankshaft rear seal. Refer to Disassembly and Assembly, "Crankshaft Rear
Seal - Remove".
C. Remove the flywheel housing. Refer to Disassembly and Assembly, "Flywheel Housing -
Remove and Install".
D. Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove
and Install".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/5(W)
w
2020/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...
Illustration 1 g00604627
1. Remove two bolts (1) from oil supply tube (2). Remove oil supply tube (2) from the engine
cylinder block.
Illustration 2 g00604637
2. Check condition of the O-ring seal (3) on the oil supply tube (2). If the O-ring is damaged,
use a new part for replacement.
2/5(W)
w
2020/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...
Illustration 3 g00604549
3. Install nut (4) and the washer onto the crankshaft. Use Tool (A) to turn the crankshaft.
Illustration 4 g00604552
4. Remove nuts and bolts (5) that secure connecting rod caps (6) to the connecting rods.
Remove connecting rod caps (6) from the connecting rods.
Note: Be careful not to damage the bearings. Mark each connecting rod cap and the bearing
in order to ensure installation in the original location.
5. Carefully push the connecting rods and the pistons into the top of bores.
Illustration 5 g00604582
6. Remove bolts (7) that secure crankshaft main bearing caps (8) in position in the engine
cylinder block. Remove crankshaft main bearing caps (8) from the engine.
Note: Be careful not to damage the bearings. Mark each crankshaft main bearing cap and
the bearing in order to ensure installation in the original location.
3/5(W)
w
2020/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...
Illustration 6 g00604584
7. Fasten a suitable lifting device and straps to crankshaft (9). Remove the crankshaft. The
weight of the crankshaft for the 3064 engine is 84 kg (185 lb). The weight of the crankshaft
for the 3066 engine is 99 kg (220 lb).
Note: Be careful not to damage the finished surfaces on the crankshaft.
Illustration 7 g00604687
8. Remove the upper halves of crankshaft main bearings (10). If necessary, remove thrust
washers (11) .
4/5(W)
w
2020/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...
Illustration 8 g00604599
9. If necessary, use a hammer and a chisel to remove the wear sleeve (12) for the crankshaft
rear seal. Hold the chisel at right angles to the surface of the wear sleeve. Tap the wear
sleeve in three places. You can remove the wear sleeve once the tension is released.
Note: When you are removing the wear sleeve, take extreme care not to damage the
crankshaft.
Note: Take extreme care not to damage the wear sleeve, if it is not necessary to remove the
wear sleeve.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Oct 29 22:58:23 UTC+0800 2020
5/5(W)
w
2020/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 320D RR EXCAVATOR GKL
Configuration: 320D RR & 320D LRR Excavators GKL00001-UP (MACHINE) POWERED BY 3066 Engine
Disassembly and Assembly
3064 and 3066 Engines for Caterpillar Built Machines
Media Number -SENR5553-10 Publication Date -01/05/2012 Date Updated -15/05/2012
i01568784
Crankshaft - Install
SMCS - 1202-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 6V-9120 Socket (1)
1
B 8T-5096 Dial Indicator 1
( 1 )
Tool (A) is a 46 mm socket.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/5(W)
w
2020/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...
Illustration 1 g00604687
1. If the thrust washers were removed, then install a thrust washer (11) on the rear face of the
crankshaft with the oil groove toward the outside.
2. Place the upper halves of crankshaft main bearings (10) in the cylinder block. Place the
lower halves of the crankshaft main bearings in crankshaft main bearing caps. Install the
bearings with the main bearing tabs in the correct position. Lubricate the bearings with
clean engine oil.
Illustration 2 g00604584
3. Lubricate the crankshaft journals with clean engine oil. Fasten a suitable lifting device and
straps to crankshaft (9). The weight of the crankshaft for the 3064 engine is 84 kg (185 lb).
The weight of the crankshaft for the 3066 engine is 99 kg (220 lb). Position crankshaft (9)
onto the upper halves of the crankshaft main bearings.
Note: Be careful not to damage the finished surfaces on the crankshaft.
2/5(W)
w
2020/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...
Illustration 3 g00604582
4. Install main bearings into main bearing caps (8). Install the bearings with the main bearing
tabs in the correct position. Lubricate the bearings with clean engine oil.
5. Place the thrust washers on the rear main bearing cap. Install the rear main bearing cap and
two seals on the rear journal of the cylinder block.
6. Install crankshaft main bearing caps (8). Put clean engine oil on the threads of the main
bearing cap bolts. Install main bearing cap bolts (7). Tighten the bolts evenly to a torque of
137 ± 5 N·m (101 ± 4 lb ft).
Note: Ensure that the crankshaft main bearing caps are installed in the original locations.
7. Cut off the excess length on the two seals on the rear journal of the cylinder block.
Illustration 4 g00604753
8. Check the end play of the crankshaft with Tool (B). The end play must be 0.100 to 0.264
mm (0.0039 to 0.0104 inch). Refer to the Testing and Adjusting Module, "Basic Block" for
more information on crankshaft end play.
3/5(W)
w
2020/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...
Illustration 5 g00604552
9. Apply a light coat of clean engine oil to the connecting rod bearing surfaces and to the
connecting rod journals. Install the connecting rods onto the connecting rod journals.
10. Install the lower half of the connecting bearings into the corresponding connecting rod caps
and install connecting rod caps (6) .
Note: Align the tabs on the back of the connecting rod bearings with the tab grooves in the
connecting rod caps.
Install the pistons and connecting rods. Refer to Disassembly and Assembly, "Pistons and
Connecting Rods - Install".
Illustration 6 g00604549
11. Check for free crankshaft rotation by rotating the crankshaft for two complete revolutions.
Use Tool (A) on crankshaft pulley nut (4) in order to rotate the crankshaft.
4/5(W)
w
2020/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...
Illustration 7 g00604637
12. Install O-ring seal (3) on oil supply tube (2) .
Illustration 8 g00604627
13. Position oil supply tube (2). Install two bolts (1) in order to secure the oil supply tube to the
cylinder block.
End By:
a. Install the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove
and Install".
b. Install the flywheel housing. Refer to Disassembly and Assembly, "Flywheel Housing -
Remove and Install".
c. Install the front housing. Refer to Disassembly and Assembly, "Housing (Front) - Install".
d. Install the crankshaft rear seal, if the crankshaft wear sleeve was removed. Refer to
Disassembly and Assembly, "Crankshaft Rear Seal - Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Oct 29 22:59:18 UTC+0800 2020
5/5(W)
w
2020/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 320D RR EXCAVATOR GKL
Configuration: 320D RR & 320D LRR Excavators GKL00001-UP (MACHINE) POWERED BY 3066 Engine
Disassembly and Assembly
3064 and 3066 Engines for Caterpillar Built Machines
Media Number -SENR5553-10 Publication Date -01/05/2012 Date Updated -15/05/2012
i01131265
Crankshaft Gear - Remove and Install
SMCS - 1204-010-GE
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
1P-0820 Hydraulic Puller 1
9U-6600 Hand Hydraulic Pump 1
0S-2398 Step Plate 1
3H-0468 Puller Plate 4
8B-7549 Puller Leg 2
1B-4207 Full Nut 2
8B-7551 Bearing Puller 1
Start By:
a. Remove the crankshaft. Refer to Disassembly and Assembly, "Crankshaft - Remove".
1/3(W)
w
2020/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...
Illustration 1 g00541880
1. Use Tool (A) to remove crankshaft gear (1) from crankshaft (2).
Note: Do not remove the gear by tapping with a hammer.
Note: Be careful not to damage the finished surfaces on the crankshaft.
2. Check the key on the crankshaft. If the key is damaged, use a new part for replacement.
Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Always wear protective gloves when handling parts that have been
heated.
1. Use an oven and heat the crankshaft gear to a temperature of about 100 °C (212 °F). The
crankshaft gear is heated in order to ease installation of the crankshaft gear.
Wear eye protection in order to prevent possible personal injury while
performing the following steps.
2/3(W)
w
2020/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...
Note: Be careful not to damage the finished surfaces on the crankshaft.
2. Install the crankshaft gear on the end of the crankshaft. Ensure that the key in the crankshaft
is aligned with the keyway in the gear. Tap lightly with a copper hammer until the
crankshaft gear is seated. Ensure that the crankshaft gear is seated against the shoulder on
the crankshaft.
Note: Ensure that the timing marks of the crankshaft gear are on the front.
End By:
a. Install the crankshaft. Refer to Disassembly and Assembly, "Crankshaft - Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Oct 29 23:00:14 UTC+0800 2020
3/3(W)
w
2020/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 320D RR EXCAVATOR GKL
Configuration: 320D RR & 320D LRR Excavators GKL00001-UP (MACHINE) POWERED BY 3066 Engine
Disassembly and Assembly
3064 and 3066 Engines for Caterpillar Built Machines
Media Number -SENR5553-10 Publication Date -01/05/2012 Date Updated -15/05/2012
i05977048
Bearing Clearance - Check
SMCS - 1203-535; 1219-535
Measurement Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
198-9142
Plastic Gauge (Green)
0.025 to 0.076 mm
(0.001 to 0.003 inch)
1
198-9143
Plastic Gauge (Red)
0.051 to 0.152 mm
(0.002 to 0.006 inch)
1
198-9144
Plastic Gauge (Blue)
0.102 to 0.229 mm
(0.004 to 0.009 inch)
1
198-9145
Plastic Gauge (Yellow)
0.230 to 0.510 mm
(0.009 to 0.020 inch)
1
Note: Plastic gauge may not be necessary when the engine is in the chassis.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/3(W)
w
2020/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...
Note: Cat does not recommend the checking of the actual bearing clearances particularly on small
engines. This is because of the possibility of obtaining inaccurate results and the possibility of
damaging the bearing or the journal surfaces. Each Cat engine bearing is quality checked for
specific wall thickness.
Note: The measurements should be within specifications and the correct bearings should be used.
If the crankshaft journals and the bores for the block and the rods were measured during
disassembly, no further checks are necessary. However, if the technician still wants to measure the
bearing clearances, Tooling (A) is an acceptable method. Tooling (A) is less accurate on journals
with small diameters if clearances are less than 0.10 mm (0.004 inch).
NOTICE
Lead wire, shim stock or a dial bore gauge can damage the bearing
surfaces.
The technician must be very careful to use Tooling (A) correctly. The following points must be
remembered:
• Ensure that the backs of the bearings and the bores are clean and dry.
• Ensure that the bearing locking tabs are properly seated in the tab grooves.
• The crankshaft must be free of oil at the contact points of Tooling (A).
1. Put a piece of Tooling (A) on the crown of the bearing that is in the cap.
Note: Do not allow Tooling (A) to extend over the edge of the bearing.
2. Use the correct torque-turn specifications in order to install the bearing cap. Do not use an
impact wrench. Be careful not to dislodge the bearing when the cap is installed.
Note: Do not turn the crankshaft when Tooling (A) is installed.
3. Carefully remove the cap, but do not remove Tooling (A). Measure the width of Tooling
(A) while Tooling (A) is in the bearing cap or on the crankshaft journal. Refer to Illustration
1.
2/3(W)
w
2020/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...
Illustration 1 g01152855
Typical Example
4. Remove all of Tooling (A) before you install the bearing cap.
Note: When Tooling (A) is used, the readings can sometimes be unclear. For example, all
parts of Tooling (A) are not the same width. Measure the major width in order to ensure that
the parts are within the specification range. Refer to Specifications Manual, "Connecting
Rod Bearing Journal" and Specifications Manual, "Main Bearing Journal" for the correct
clearances.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Oct 29 23:01:10 UTC+0800 2020
3/3(W)
w
2020/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 320D RR EXCAVATOR GKL
Configuration: 320D RR & 320D LRR Excavators GKL00001-UP (MACHINE) POWERED BY 3066 Engine
Disassembly and Assembly
3064 and 3066 Engines for Caterpillar Built Machines
Media Number -SENR5553-10 Publication Date -01/05/2012 Date Updated -15/05/2012
i01569484
Coolant Temperature Switch - Remove and Install
SMCS - 1906-010
Removal Procedure
Personal injury can result from hot coolant, steam and alkali.
At operating temperature, engine coolant is hot and under pressure.
The radiator and all lines to heaters or the engine contain hot coolant or
steam. Any contact can cause severe burns.
Remove cooling system pressure cap slowly to relieve pressure only
when engine is stopped and cooling system pressure cap is cool enough
to touch with your bare hand.
Do not attempt to tighten hose connections when the coolant is hot, the
hose can come off causing burns.
Cooling System Coolant Additive contains alkali. Avoid contact with
skin and eyes.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/3(W)
w
2020/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
1. Drain the level of coolant from the radiator below the coolant temperature switch. Drain the
coolant into a suitable container for storage or disposal.
2. Disconnect the electrical connection to the coolant temperature switch.
Illustration 1 g00814982
3. Remove coolant temperature switch (1) from the elbow.
Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
2/3(W)
w
2020/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...
1. Apply a thin coat of 5P-3413 Pipe Sealant to coolant temperature switch (1) .
Illustration 2 g00814982
2. Install coolant temperature switch (1). Tighten coolant temperature switch (1) to a torque of
7 to 12 N·m (62 to 106 lb in).
3. Reconnect the electrical connection to the coolant temperature switch.
4. Fill the cooling system with coolant to the correct level. Refer to the Operation and
Maintenance Manual, "Refill Capacities" topic for more information.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Oct 29 23:02:06 UTC+0800 2020
3/3(W)
w
2020/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...
Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 320D RR EXCAVATOR GKL
Configuration: 320D RR & 320D LRR Excavators GKL00001-UP (MACHINE) POWERED BY 3066 Engine
Disassembly and Assembly
3064 and 3066 Engines for Caterpillar Built Machines
Media Number -SENR5553-10 Publication Date -01/05/2012 Date Updated -15/05/2012
i01569542
Engine Oil Pressure Switch - Remove and Install
SMCS - 1924
Removal Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
Note: Disconnect all electrical connections to the engine oil pressure switch before
proceeding. Mark all connections for later installation.
1/3(W)
w
2020/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...
Illustration 1 g00815016
1. Remove engine oil pressure switch (1) from the cylinder block.
Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 2 g00815016
1. Install engine oil pressure switch (1) in the cylinder block.
2. Tighten engine oil pressure switch (1) to a torque of 7 to 12 N·m (62 to 106 lb in).
Note: Reconnect all electrical connections to the engine oil pressure switch before you
operate the engine.
2/3(W)
w
2020/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...

More Related Content

What's hot

Caterpillar cat 320 d2 excavator (prefix rdz) service repair manual (rdz00001...
Caterpillar cat 320 d2 excavator (prefix rdz) service repair manual (rdz00001...Caterpillar cat 320 d2 excavator (prefix rdz) service repair manual (rdz00001...
Caterpillar cat 320 d2 excavator (prefix rdz) service repair manual (rdz00001...udfjjjsekekkem
 
Caterpillar cat 16 h na motor grader (prefix 6zj) service repair manual (6zj0...
Caterpillar cat 16 h na motor grader (prefix 6zj) service repair manual (6zj0...Caterpillar cat 16 h na motor grader (prefix 6zj) service repair manual (6zj0...
Caterpillar cat 16 h na motor grader (prefix 6zj) service repair manual (6zj0...fjskefkemms
 
Caterpillar cat 330 c fm excavator (prefix b4n) service repair manual (b4n000...
Caterpillar cat 330 c fm excavator (prefix b4n) service repair manual (b4n000...Caterpillar cat 330 c fm excavator (prefix b4n) service repair manual (b4n000...
Caterpillar cat 330 c fm excavator (prefix b4n) service repair manual (b4n000...fjsjekdmmeme
 
Caterpillar cat 517 track skidder (prefix 6 pw) service repair manual (6pw000...
Caterpillar cat 517 track skidder (prefix 6 pw) service repair manual (6pw000...Caterpillar cat 517 track skidder (prefix 6 pw) service repair manual (6pw000...
Caterpillar cat 517 track skidder (prefix 6 pw) service repair manual (6pw000...ujfjjsjekkmsmd
 
Caterpillar cat 330 b l excavator (prefix 5lr) service repair manual (5lr0000...
Caterpillar cat 330 b l excavator (prefix 5lr) service repair manual (5lr0000...Caterpillar cat 330 b l excavator (prefix 5lr) service repair manual (5lr0000...
Caterpillar cat 330 b l excavator (prefix 5lr) service repair manual (5lr0000...fjskefkemms
 
Caterpillar cat m318 excavator (prefix 8 ss) service repair manual (8ss00001 ...
Caterpillar cat m318 excavator (prefix 8 ss) service repair manual (8ss00001 ...Caterpillar cat m318 excavator (prefix 8 ss) service repair manual (8ss00001 ...
Caterpillar cat m318 excavator (prefix 8 ss) service repair manual (8ss00001 ...fjskkmemem
 

What's hot (6)

Caterpillar cat 320 d2 excavator (prefix rdz) service repair manual (rdz00001...
Caterpillar cat 320 d2 excavator (prefix rdz) service repair manual (rdz00001...Caterpillar cat 320 d2 excavator (prefix rdz) service repair manual (rdz00001...
Caterpillar cat 320 d2 excavator (prefix rdz) service repair manual (rdz00001...
 
Caterpillar cat 16 h na motor grader (prefix 6zj) service repair manual (6zj0...
Caterpillar cat 16 h na motor grader (prefix 6zj) service repair manual (6zj0...Caterpillar cat 16 h na motor grader (prefix 6zj) service repair manual (6zj0...
Caterpillar cat 16 h na motor grader (prefix 6zj) service repair manual (6zj0...
 
Caterpillar cat 330 c fm excavator (prefix b4n) service repair manual (b4n000...
Caterpillar cat 330 c fm excavator (prefix b4n) service repair manual (b4n000...Caterpillar cat 330 c fm excavator (prefix b4n) service repair manual (b4n000...
Caterpillar cat 330 c fm excavator (prefix b4n) service repair manual (b4n000...
 
Caterpillar cat 517 track skidder (prefix 6 pw) service repair manual (6pw000...
Caterpillar cat 517 track skidder (prefix 6 pw) service repair manual (6pw000...Caterpillar cat 517 track skidder (prefix 6 pw) service repair manual (6pw000...
Caterpillar cat 517 track skidder (prefix 6 pw) service repair manual (6pw000...
 
Caterpillar cat 330 b l excavator (prefix 5lr) service repair manual (5lr0000...
Caterpillar cat 330 b l excavator (prefix 5lr) service repair manual (5lr0000...Caterpillar cat 330 b l excavator (prefix 5lr) service repair manual (5lr0000...
Caterpillar cat 330 b l excavator (prefix 5lr) service repair manual (5lr0000...
 
Caterpillar cat m318 excavator (prefix 8 ss) service repair manual (8ss00001 ...
Caterpillar cat m318 excavator (prefix 8 ss) service repair manual (8ss00001 ...Caterpillar cat m318 excavator (prefix 8 ss) service repair manual (8ss00001 ...
Caterpillar cat m318 excavator (prefix 8 ss) service repair manual (8ss00001 ...
 

Similar to Caterpillar cat 320 d rr excavator (prefix gkl) service repair manual (gkl00001 and up)

Caterpillar cat 323 d l excavator (prefix pbm) service repair manual (pbm0000...
Caterpillar cat 323 d l excavator (prefix pbm) service repair manual (pbm0000...Caterpillar cat 323 d l excavator (prefix pbm) service repair manual (pbm0000...
Caterpillar cat 323 d l excavator (prefix pbm) service repair manual (pbm0000...fjjskekdmmme
 
Caterpillar cat 320 d rr excavator (prefix fxk) service repair manual (fxk000...
Caterpillar cat 320 d rr excavator (prefix fxk) service repair manual (fxk000...Caterpillar cat 320 d rr excavator (prefix fxk) service repair manual (fxk000...
Caterpillar cat 320 d rr excavator (prefix fxk) service repair manual (fxk000...fjskefksemer
 
Caterpillar cat 320 d lrr excavator (prefix fxk) service repair manual (fxk00...
Caterpillar cat 320 d lrr excavator (prefix fxk) service repair manual (fxk00...Caterpillar cat 320 d lrr excavator (prefix fxk) service repair manual (fxk00...
Caterpillar cat 320 d lrr excavator (prefix fxk) service repair manual (fxk00...fjskefksemer
 
Caterpillar cat 320 d rr excavator (prefix fxk) service repair manual (fxk000...
Caterpillar cat 320 d rr excavator (prefix fxk) service repair manual (fxk000...Caterpillar cat 320 d rr excavator (prefix fxk) service repair manual (fxk000...
Caterpillar cat 320 d rr excavator (prefix fxk) service repair manual (fxk000...fjkskedmme
 
Caterpillar cat 320 d rr excavator (prefix fxk) service repair manual (fxk000...
Caterpillar cat 320 d rr excavator (prefix fxk) service repair manual (fxk000...Caterpillar cat 320 d rr excavator (prefix fxk) service repair manual (fxk000...
Caterpillar cat 320 d rr excavator (prefix fxk) service repair manual (fxk000...9fiseookddk
 
Caterpillar cat 320 d lrr excavator (prefix fxk) service repair manual (fxk00...
Caterpillar cat 320 d lrr excavator (prefix fxk) service repair manual (fxk00...Caterpillar cat 320 d lrr excavator (prefix fxk) service repair manual (fxk00...
Caterpillar cat 320 d lrr excavator (prefix fxk) service repair manual (fxk00...9fiseookddk
 
Caterpillar cat m318 excavator (prefix 8 ss) service repair manual (8ss00001 ...
Caterpillar cat m318 excavator (prefix 8 ss) service repair manual (8ss00001 ...Caterpillar cat m318 excavator (prefix 8 ss) service repair manual (8ss00001 ...
Caterpillar cat m318 excavator (prefix 8 ss) service repair manual (8ss00001 ...fjsjekkdmnem
 

Similar to Caterpillar cat 320 d rr excavator (prefix gkl) service repair manual (gkl00001 and up) (7)

Caterpillar cat 323 d l excavator (prefix pbm) service repair manual (pbm0000...
Caterpillar cat 323 d l excavator (prefix pbm) service repair manual (pbm0000...Caterpillar cat 323 d l excavator (prefix pbm) service repair manual (pbm0000...
Caterpillar cat 323 d l excavator (prefix pbm) service repair manual (pbm0000...
 
Caterpillar cat 320 d rr excavator (prefix fxk) service repair manual (fxk000...
Caterpillar cat 320 d rr excavator (prefix fxk) service repair manual (fxk000...Caterpillar cat 320 d rr excavator (prefix fxk) service repair manual (fxk000...
Caterpillar cat 320 d rr excavator (prefix fxk) service repair manual (fxk000...
 
Caterpillar cat 320 d lrr excavator (prefix fxk) service repair manual (fxk00...
Caterpillar cat 320 d lrr excavator (prefix fxk) service repair manual (fxk00...Caterpillar cat 320 d lrr excavator (prefix fxk) service repair manual (fxk00...
Caterpillar cat 320 d lrr excavator (prefix fxk) service repair manual (fxk00...
 
Caterpillar cat 320 d rr excavator (prefix fxk) service repair manual (fxk000...
Caterpillar cat 320 d rr excavator (prefix fxk) service repair manual (fxk000...Caterpillar cat 320 d rr excavator (prefix fxk) service repair manual (fxk000...
Caterpillar cat 320 d rr excavator (prefix fxk) service repair manual (fxk000...
 
Caterpillar cat 320 d rr excavator (prefix fxk) service repair manual (fxk000...
Caterpillar cat 320 d rr excavator (prefix fxk) service repair manual (fxk000...Caterpillar cat 320 d rr excavator (prefix fxk) service repair manual (fxk000...
Caterpillar cat 320 d rr excavator (prefix fxk) service repair manual (fxk000...
 
Caterpillar cat 320 d lrr excavator (prefix fxk) service repair manual (fxk00...
Caterpillar cat 320 d lrr excavator (prefix fxk) service repair manual (fxk00...Caterpillar cat 320 d lrr excavator (prefix fxk) service repair manual (fxk00...
Caterpillar cat 320 d lrr excavator (prefix fxk) service repair manual (fxk00...
 
Caterpillar cat m318 excavator (prefix 8 ss) service repair manual (8ss00001 ...
Caterpillar cat m318 excavator (prefix 8 ss) service repair manual (8ss00001 ...Caterpillar cat m318 excavator (prefix 8 ss) service repair manual (8ss00001 ...
Caterpillar cat m318 excavator (prefix 8 ss) service repair manual (8ss00001 ...
 

More from fjkskedmme

Caterpillar cat 390 f excavator (prefix feh) service repair manual (feh00001 ...
Caterpillar cat 390 f excavator (prefix feh) service repair manual (feh00001 ...Caterpillar cat 390 f excavator (prefix feh) service repair manual (feh00001 ...
Caterpillar cat 390 f excavator (prefix feh) service repair manual (feh00001 ...fjkskedmme
 
Caterpillar cat 385 c l excavator (prefix t2e) service repair manual (t2e0000...
Caterpillar cat 385 c l excavator (prefix t2e) service repair manual (t2e0000...Caterpillar cat 385 c l excavator (prefix t2e) service repair manual (t2e0000...
Caterpillar cat 385 c l excavator (prefix t2e) service repair manual (t2e0000...fjkskedmme
 
Caterpillar cat 385 c l excavator (prefix sbe) service repair manual (sbe0000...
Caterpillar cat 385 c l excavator (prefix sbe) service repair manual (sbe0000...Caterpillar cat 385 c l excavator (prefix sbe) service repair manual (sbe0000...
Caterpillar cat 385 c l excavator (prefix sbe) service repair manual (sbe0000...fjkskedmme
 
Caterpillar cat 385 c l excavator (prefix eda) service repair manual (eda0000...
Caterpillar cat 385 c l excavator (prefix eda) service repair manual (eda0000...Caterpillar cat 385 c l excavator (prefix eda) service repair manual (eda0000...
Caterpillar cat 385 c l excavator (prefix eda) service repair manual (eda0000...fjkskedmme
 
Caterpillar cat 374 f l excavator (prefix nfj) service repair manual (nfj0000...
Caterpillar cat 374 f l excavator (prefix nfj) service repair manual (nfj0000...Caterpillar cat 374 f l excavator (prefix nfj) service repair manual (nfj0000...
Caterpillar cat 374 f l excavator (prefix nfj) service repair manual (nfj0000...fjkskedmme
 
Caterpillar cat 374 f l excavator (prefix mfl) service repair manual (mfl0000...
Caterpillar cat 374 f l excavator (prefix mfl) service repair manual (mfl0000...Caterpillar cat 374 f l excavator (prefix mfl) service repair manual (mfl0000...
Caterpillar cat 374 f l excavator (prefix mfl) service repair manual (mfl0000...fjkskedmme
 
Caterpillar cat 374 f l excavator (prefix dnm) service repair manual (dnm0000...
Caterpillar cat 374 f l excavator (prefix dnm) service repair manual (dnm0000...Caterpillar cat 374 f l excavator (prefix dnm) service repair manual (dnm0000...
Caterpillar cat 374 f l excavator (prefix dnm) service repair manual (dnm0000...fjkskedmme
 
Caterpillar cat 374 f l excavator (prefix at2) service repair manual (at20000...
Caterpillar cat 374 f l excavator (prefix at2) service repair manual (at20000...Caterpillar cat 374 f l excavator (prefix at2) service repair manual (at20000...
Caterpillar cat 374 f l excavator (prefix at2) service repair manual (at20000...fjkskedmme
 
Caterpillar cat 374 f l excavator (prefix ap4) service repair manual (ap40000...
Caterpillar cat 374 f l excavator (prefix ap4) service repair manual (ap40000...Caterpillar cat 374 f l excavator (prefix ap4) service repair manual (ap40000...
Caterpillar cat 374 f l excavator (prefix ap4) service repair manual (ap40000...fjkskedmme
 
Caterpillar cat 374 d l excavator (prefix pja) service repair manual (pja0000...
Caterpillar cat 374 d l excavator (prefix pja) service repair manual (pja0000...Caterpillar cat 374 d l excavator (prefix pja) service repair manual (pja0000...
Caterpillar cat 374 d l excavator (prefix pja) service repair manual (pja0000...fjkskedmme
 
Caterpillar cat 374 d l excavator (prefix pax) service repair manual (pax0000...
Caterpillar cat 374 d l excavator (prefix pax) service repair manual (pax0000...Caterpillar cat 374 d l excavator (prefix pax) service repair manual (pax0000...
Caterpillar cat 374 d l excavator (prefix pax) service repair manual (pax0000...fjkskedmme
 
Caterpillar cat 365 c l hydraulic excavator (prefix par) service repair manua...
Caterpillar cat 365 c l hydraulic excavator (prefix par) service repair manua...Caterpillar cat 365 c l hydraulic excavator (prefix par) service repair manua...
Caterpillar cat 365 c l hydraulic excavator (prefix par) service repair manua...fjkskedmme
 
Caterpillar cat 365 c l excavator (prefix mcy) service repair manual (mcy0000...
Caterpillar cat 365 c l excavator (prefix mcy) service repair manual (mcy0000...Caterpillar cat 365 c l excavator (prefix mcy) service repair manual (mcy0000...
Caterpillar cat 365 c l excavator (prefix mcy) service repair manual (mcy0000...fjkskedmme
 
Caterpillar cat 349 e l vg excavator (prefix kcn) service repair manual (kcn0...
Caterpillar cat 349 e l vg excavator (prefix kcn) service repair manual (kcn0...Caterpillar cat 349 e l vg excavator (prefix kcn) service repair manual (kcn0...
Caterpillar cat 349 e l vg excavator (prefix kcn) service repair manual (kcn0...fjkskedmme
 
Caterpillar cat 349 e l vg excavator (prefix dge) service repair manual (dge0...
Caterpillar cat 349 e l vg excavator (prefix dge) service repair manual (dge0...Caterpillar cat 349 e l vg excavator (prefix dge) service repair manual (dge0...
Caterpillar cat 349 e l vg excavator (prefix dge) service repair manual (dge0...fjkskedmme
 
Caterpillar cat 345 c lc excavator (prefix dhp) service repair manual (dhp000...
Caterpillar cat 345 c lc excavator (prefix dhp) service repair manual (dhp000...Caterpillar cat 345 c lc excavator (prefix dhp) service repair manual (dhp000...
Caterpillar cat 345 c lc excavator (prefix dhp) service repair manual (dhp000...fjkskedmme
 
Caterpillar cat 345 c l hydraulic excavator (prefix tdg) service repair manua...
Caterpillar cat 345 c l hydraulic excavator (prefix tdg) service repair manua...Caterpillar cat 345 c l hydraulic excavator (prefix tdg) service repair manua...
Caterpillar cat 345 c l hydraulic excavator (prefix tdg) service repair manua...fjkskedmme
 
Caterpillar cat 345 c l hydraulic excavator (prefix lys) service repair manua...
Caterpillar cat 345 c l hydraulic excavator (prefix lys) service repair manua...Caterpillar cat 345 c l hydraulic excavator (prefix lys) service repair manua...
Caterpillar cat 345 c l hydraulic excavator (prefix lys) service repair manua...fjkskedmme
 
Caterpillar cat 345 c l hydraulic excavator (prefix gph) service repair manua...
Caterpillar cat 345 c l hydraulic excavator (prefix gph) service repair manua...Caterpillar cat 345 c l hydraulic excavator (prefix gph) service repair manua...
Caterpillar cat 345 c l hydraulic excavator (prefix gph) service repair manua...fjkskedmme
 
Caterpillar cat 345 c l hydraulic excavator (prefix fpc) service repair manua...
Caterpillar cat 345 c l hydraulic excavator (prefix fpc) service repair manua...Caterpillar cat 345 c l hydraulic excavator (prefix fpc) service repair manua...
Caterpillar cat 345 c l hydraulic excavator (prefix fpc) service repair manua...fjkskedmme
 

More from fjkskedmme (20)

Caterpillar cat 390 f excavator (prefix feh) service repair manual (feh00001 ...
Caterpillar cat 390 f excavator (prefix feh) service repair manual (feh00001 ...Caterpillar cat 390 f excavator (prefix feh) service repair manual (feh00001 ...
Caterpillar cat 390 f excavator (prefix feh) service repair manual (feh00001 ...
 
Caterpillar cat 385 c l excavator (prefix t2e) service repair manual (t2e0000...
Caterpillar cat 385 c l excavator (prefix t2e) service repair manual (t2e0000...Caterpillar cat 385 c l excavator (prefix t2e) service repair manual (t2e0000...
Caterpillar cat 385 c l excavator (prefix t2e) service repair manual (t2e0000...
 
Caterpillar cat 385 c l excavator (prefix sbe) service repair manual (sbe0000...
Caterpillar cat 385 c l excavator (prefix sbe) service repair manual (sbe0000...Caterpillar cat 385 c l excavator (prefix sbe) service repair manual (sbe0000...
Caterpillar cat 385 c l excavator (prefix sbe) service repair manual (sbe0000...
 
Caterpillar cat 385 c l excavator (prefix eda) service repair manual (eda0000...
Caterpillar cat 385 c l excavator (prefix eda) service repair manual (eda0000...Caterpillar cat 385 c l excavator (prefix eda) service repair manual (eda0000...
Caterpillar cat 385 c l excavator (prefix eda) service repair manual (eda0000...
 
Caterpillar cat 374 f l excavator (prefix nfj) service repair manual (nfj0000...
Caterpillar cat 374 f l excavator (prefix nfj) service repair manual (nfj0000...Caterpillar cat 374 f l excavator (prefix nfj) service repair manual (nfj0000...
Caterpillar cat 374 f l excavator (prefix nfj) service repair manual (nfj0000...
 
Caterpillar cat 374 f l excavator (prefix mfl) service repair manual (mfl0000...
Caterpillar cat 374 f l excavator (prefix mfl) service repair manual (mfl0000...Caterpillar cat 374 f l excavator (prefix mfl) service repair manual (mfl0000...
Caterpillar cat 374 f l excavator (prefix mfl) service repair manual (mfl0000...
 
Caterpillar cat 374 f l excavator (prefix dnm) service repair manual (dnm0000...
Caterpillar cat 374 f l excavator (prefix dnm) service repair manual (dnm0000...Caterpillar cat 374 f l excavator (prefix dnm) service repair manual (dnm0000...
Caterpillar cat 374 f l excavator (prefix dnm) service repair manual (dnm0000...
 
Caterpillar cat 374 f l excavator (prefix at2) service repair manual (at20000...
Caterpillar cat 374 f l excavator (prefix at2) service repair manual (at20000...Caterpillar cat 374 f l excavator (prefix at2) service repair manual (at20000...
Caterpillar cat 374 f l excavator (prefix at2) service repair manual (at20000...
 
Caterpillar cat 374 f l excavator (prefix ap4) service repair manual (ap40000...
Caterpillar cat 374 f l excavator (prefix ap4) service repair manual (ap40000...Caterpillar cat 374 f l excavator (prefix ap4) service repair manual (ap40000...
Caterpillar cat 374 f l excavator (prefix ap4) service repair manual (ap40000...
 
Caterpillar cat 374 d l excavator (prefix pja) service repair manual (pja0000...
Caterpillar cat 374 d l excavator (prefix pja) service repair manual (pja0000...Caterpillar cat 374 d l excavator (prefix pja) service repair manual (pja0000...
Caterpillar cat 374 d l excavator (prefix pja) service repair manual (pja0000...
 
Caterpillar cat 374 d l excavator (prefix pax) service repair manual (pax0000...
Caterpillar cat 374 d l excavator (prefix pax) service repair manual (pax0000...Caterpillar cat 374 d l excavator (prefix pax) service repair manual (pax0000...
Caterpillar cat 374 d l excavator (prefix pax) service repair manual (pax0000...
 
Caterpillar cat 365 c l hydraulic excavator (prefix par) service repair manua...
Caterpillar cat 365 c l hydraulic excavator (prefix par) service repair manua...Caterpillar cat 365 c l hydraulic excavator (prefix par) service repair manua...
Caterpillar cat 365 c l hydraulic excavator (prefix par) service repair manua...
 
Caterpillar cat 365 c l excavator (prefix mcy) service repair manual (mcy0000...
Caterpillar cat 365 c l excavator (prefix mcy) service repair manual (mcy0000...Caterpillar cat 365 c l excavator (prefix mcy) service repair manual (mcy0000...
Caterpillar cat 365 c l excavator (prefix mcy) service repair manual (mcy0000...
 
Caterpillar cat 349 e l vg excavator (prefix kcn) service repair manual (kcn0...
Caterpillar cat 349 e l vg excavator (prefix kcn) service repair manual (kcn0...Caterpillar cat 349 e l vg excavator (prefix kcn) service repair manual (kcn0...
Caterpillar cat 349 e l vg excavator (prefix kcn) service repair manual (kcn0...
 
Caterpillar cat 349 e l vg excavator (prefix dge) service repair manual (dge0...
Caterpillar cat 349 e l vg excavator (prefix dge) service repair manual (dge0...Caterpillar cat 349 e l vg excavator (prefix dge) service repair manual (dge0...
Caterpillar cat 349 e l vg excavator (prefix dge) service repair manual (dge0...
 
Caterpillar cat 345 c lc excavator (prefix dhp) service repair manual (dhp000...
Caterpillar cat 345 c lc excavator (prefix dhp) service repair manual (dhp000...Caterpillar cat 345 c lc excavator (prefix dhp) service repair manual (dhp000...
Caterpillar cat 345 c lc excavator (prefix dhp) service repair manual (dhp000...
 
Caterpillar cat 345 c l hydraulic excavator (prefix tdg) service repair manua...
Caterpillar cat 345 c l hydraulic excavator (prefix tdg) service repair manua...Caterpillar cat 345 c l hydraulic excavator (prefix tdg) service repair manua...
Caterpillar cat 345 c l hydraulic excavator (prefix tdg) service repair manua...
 
Caterpillar cat 345 c l hydraulic excavator (prefix lys) service repair manua...
Caterpillar cat 345 c l hydraulic excavator (prefix lys) service repair manua...Caterpillar cat 345 c l hydraulic excavator (prefix lys) service repair manua...
Caterpillar cat 345 c l hydraulic excavator (prefix lys) service repair manua...
 
Caterpillar cat 345 c l hydraulic excavator (prefix gph) service repair manua...
Caterpillar cat 345 c l hydraulic excavator (prefix gph) service repair manua...Caterpillar cat 345 c l hydraulic excavator (prefix gph) service repair manua...
Caterpillar cat 345 c l hydraulic excavator (prefix gph) service repair manua...
 
Caterpillar cat 345 c l hydraulic excavator (prefix fpc) service repair manua...
Caterpillar cat 345 c l hydraulic excavator (prefix fpc) service repair manua...Caterpillar cat 345 c l hydraulic excavator (prefix fpc) service repair manua...
Caterpillar cat 345 c l hydraulic excavator (prefix fpc) service repair manua...
 

Recently uploaded

Hyundai World Rally Team in action at 2024 WRC
Hyundai World Rally Team in action at 2024 WRCHyundai World Rally Team in action at 2024 WRC
Hyundai World Rally Team in action at 2024 WRCHyundai Motor Group
 
Tata_Nexon_brochure tata nexon brochure tata
Tata_Nexon_brochure tata nexon brochure tataTata_Nexon_brochure tata nexon brochure tata
Tata_Nexon_brochure tata nexon brochure tataaritradey27234
 
83778-77756 ( HER.SELF ) Brings Call Girls In Laxmi Nagar
83778-77756 ( HER.SELF ) Brings Call Girls In Laxmi Nagar83778-77756 ( HER.SELF ) Brings Call Girls In Laxmi Nagar
83778-77756 ( HER.SELF ) Brings Call Girls In Laxmi Nagardollysharma2066
 
Call Girls Bangalore Just Call 👗 7737669865 👗 Top Class Call Girl Service Ban...
Call Girls Bangalore Just Call 👗 7737669865 👗 Top Class Call Girl Service Ban...Call Girls Bangalore Just Call 👗 7737669865 👗 Top Class Call Girl Service Ban...
Call Girls Bangalore Just Call 👗 7737669865 👗 Top Class Call Girl Service Ban...amitlee9823
 
Sales & Marketing Alignment_ How to Synergize for Success.pptx.pdf
Sales & Marketing Alignment_ How to Synergize for Success.pptx.pdfSales & Marketing Alignment_ How to Synergize for Success.pptx.pdf
Sales & Marketing Alignment_ How to Synergize for Success.pptx.pdfAggregage
 
ENJOY Call Girls In Okhla Vihar Delhi Call 9654467111
ENJOY Call Girls In Okhla Vihar Delhi Call 9654467111ENJOY Call Girls In Okhla Vihar Delhi Call 9654467111
ENJOY Call Girls In Okhla Vihar Delhi Call 9654467111Sapana Sha
 
design a four cylinder internal combustion engine
design a four cylinder internal combustion enginedesign a four cylinder internal combustion engine
design a four cylinder internal combustion enginepiyushsingh943161
 
John Deere Tractors 6130M 6140M Diagnostic Manual
John Deere Tractors  6130M 6140M Diagnostic ManualJohn Deere Tractors  6130M 6140M Diagnostic Manual
John Deere Tractors 6130M 6140M Diagnostic ManualExcavator
 
如何办理麦考瑞大学毕业证(MQU毕业证书)成绩单原版一比一
如何办理麦考瑞大学毕业证(MQU毕业证书)成绩单原版一比一如何办理麦考瑞大学毕业证(MQU毕业证书)成绩单原版一比一
如何办理麦考瑞大学毕业证(MQU毕业证书)成绩单原版一比一ozave
 
Delhi Call Girls East Of Kailash 9711199171 ☎✔👌✔ Whatsapp Hard And Sexy Vip Call
Delhi Call Girls East Of Kailash 9711199171 ☎✔👌✔ Whatsapp Hard And Sexy Vip CallDelhi Call Girls East Of Kailash 9711199171 ☎✔👌✔ Whatsapp Hard And Sexy Vip Call
Delhi Call Girls East Of Kailash 9711199171 ☎✔👌✔ Whatsapp Hard And Sexy Vip Callshivangimorya083
 
Lucknow 💋 (Genuine) Escort Service Lucknow | Service-oriented sexy call girls...
Lucknow 💋 (Genuine) Escort Service Lucknow | Service-oriented sexy call girls...Lucknow 💋 (Genuine) Escort Service Lucknow | Service-oriented sexy call girls...
Lucknow 💋 (Genuine) Escort Service Lucknow | Service-oriented sexy call girls...anilsa9823
 
Bangalore Call Girls: 🍓 7737669865 🍓 High Profile Model Escorts | Bangalore E...
Bangalore Call Girls: 🍓 7737669865 🍓 High Profile Model Escorts | Bangalore E...Bangalore Call Girls: 🍓 7737669865 🍓 High Profile Model Escorts | Bangalore E...
Bangalore Call Girls: 🍓 7737669865 🍓 High Profile Model Escorts | Bangalore E...amitlee9823
 
Greenery-Palette Pitch Deck by Slidesgo.pptx
Greenery-Palette Pitch Deck by Slidesgo.pptxGreenery-Palette Pitch Deck by Slidesgo.pptx
Greenery-Palette Pitch Deck by Slidesgo.pptxzohiiimughal286
 
John deere 425 445 455 Maitenance Manual
John deere 425 445 455 Maitenance ManualJohn deere 425 445 455 Maitenance Manual
John deere 425 445 455 Maitenance ManualExcavator
 
Delhi Call Girls Vikaspuri 9711199171 ☎✔👌✔ Whatsapp Hard And Sexy Vip Call
Delhi Call Girls Vikaspuri 9711199171 ☎✔👌✔ Whatsapp Hard And Sexy Vip CallDelhi Call Girls Vikaspuri 9711199171 ☎✔👌✔ Whatsapp Hard And Sexy Vip Call
Delhi Call Girls Vikaspuri 9711199171 ☎✔👌✔ Whatsapp Hard And Sexy Vip Callshivangimorya083
 
How To Troubleshoot Mercedes Blind Spot Assist Inoperative Error
How To Troubleshoot Mercedes Blind Spot Assist Inoperative ErrorHow To Troubleshoot Mercedes Blind Spot Assist Inoperative Error
How To Troubleshoot Mercedes Blind Spot Assist Inoperative ErrorAndres Auto Service
 
Hot Modals Call Girls (Delhi) Dwarka9711199171✔️ High Class Service 100% Saf...
Hot Modals Call Girls (Delhi) Dwarka9711199171✔️ High Class  Service 100% Saf...Hot Modals Call Girls (Delhi) Dwarka9711199171✔️ High Class  Service 100% Saf...
Hot Modals Call Girls (Delhi) Dwarka9711199171✔️ High Class Service 100% Saf...shivangimorya083
 

Recently uploaded (20)

(INDIRA) Call Girl Nashik Call Now 8617697112 Nashik Escorts 24x7
(INDIRA) Call Girl Nashik Call Now 8617697112 Nashik Escorts 24x7(INDIRA) Call Girl Nashik Call Now 8617697112 Nashik Escorts 24x7
(INDIRA) Call Girl Nashik Call Now 8617697112 Nashik Escorts 24x7
 
Hyundai World Rally Team in action at 2024 WRC
Hyundai World Rally Team in action at 2024 WRCHyundai World Rally Team in action at 2024 WRC
Hyundai World Rally Team in action at 2024 WRC
 
Tata_Nexon_brochure tata nexon brochure tata
Tata_Nexon_brochure tata nexon brochure tataTata_Nexon_brochure tata nexon brochure tata
Tata_Nexon_brochure tata nexon brochure tata
 
83778-77756 ( HER.SELF ) Brings Call Girls In Laxmi Nagar
83778-77756 ( HER.SELF ) Brings Call Girls In Laxmi Nagar83778-77756 ( HER.SELF ) Brings Call Girls In Laxmi Nagar
83778-77756 ( HER.SELF ) Brings Call Girls In Laxmi Nagar
 
Call Girls Bangalore Just Call 👗 7737669865 👗 Top Class Call Girl Service Ban...
Call Girls Bangalore Just Call 👗 7737669865 👗 Top Class Call Girl Service Ban...Call Girls Bangalore Just Call 👗 7737669865 👗 Top Class Call Girl Service Ban...
Call Girls Bangalore Just Call 👗 7737669865 👗 Top Class Call Girl Service Ban...
 
Sales & Marketing Alignment_ How to Synergize for Success.pptx.pdf
Sales & Marketing Alignment_ How to Synergize for Success.pptx.pdfSales & Marketing Alignment_ How to Synergize for Success.pptx.pdf
Sales & Marketing Alignment_ How to Synergize for Success.pptx.pdf
 
ENJOY Call Girls In Okhla Vihar Delhi Call 9654467111
ENJOY Call Girls In Okhla Vihar Delhi Call 9654467111ENJOY Call Girls In Okhla Vihar Delhi Call 9654467111
ENJOY Call Girls In Okhla Vihar Delhi Call 9654467111
 
design a four cylinder internal combustion engine
design a four cylinder internal combustion enginedesign a four cylinder internal combustion engine
design a four cylinder internal combustion engine
 
Stay Cool and Compliant: Know Your Window Tint Laws Before You Tint
Stay Cool and Compliant: Know Your Window Tint Laws Before You TintStay Cool and Compliant: Know Your Window Tint Laws Before You Tint
Stay Cool and Compliant: Know Your Window Tint Laws Before You Tint
 
John Deere Tractors 6130M 6140M Diagnostic Manual
John Deere Tractors  6130M 6140M Diagnostic ManualJohn Deere Tractors  6130M 6140M Diagnostic Manual
John Deere Tractors 6130M 6140M Diagnostic Manual
 
如何办理麦考瑞大学毕业证(MQU毕业证书)成绩单原版一比一
如何办理麦考瑞大学毕业证(MQU毕业证书)成绩单原版一比一如何办理麦考瑞大学毕业证(MQU毕业证书)成绩单原版一比一
如何办理麦考瑞大学毕业证(MQU毕业证书)成绩单原版一比一
 
Delhi Call Girls East Of Kailash 9711199171 ☎✔👌✔ Whatsapp Hard And Sexy Vip Call
Delhi Call Girls East Of Kailash 9711199171 ☎✔👌✔ Whatsapp Hard And Sexy Vip CallDelhi Call Girls East Of Kailash 9711199171 ☎✔👌✔ Whatsapp Hard And Sexy Vip Call
Delhi Call Girls East Of Kailash 9711199171 ☎✔👌✔ Whatsapp Hard And Sexy Vip Call
 
Lucknow 💋 (Genuine) Escort Service Lucknow | Service-oriented sexy call girls...
Lucknow 💋 (Genuine) Escort Service Lucknow | Service-oriented sexy call girls...Lucknow 💋 (Genuine) Escort Service Lucknow | Service-oriented sexy call girls...
Lucknow 💋 (Genuine) Escort Service Lucknow | Service-oriented sexy call girls...
 
Bangalore Call Girls: 🍓 7737669865 🍓 High Profile Model Escorts | Bangalore E...
Bangalore Call Girls: 🍓 7737669865 🍓 High Profile Model Escorts | Bangalore E...Bangalore Call Girls: 🍓 7737669865 🍓 High Profile Model Escorts | Bangalore E...
Bangalore Call Girls: 🍓 7737669865 🍓 High Profile Model Escorts | Bangalore E...
 
Greenery-Palette Pitch Deck by Slidesgo.pptx
Greenery-Palette Pitch Deck by Slidesgo.pptxGreenery-Palette Pitch Deck by Slidesgo.pptx
Greenery-Palette Pitch Deck by Slidesgo.pptx
 
Call Now ≽ 9953056974 ≼🔝 Call Girls In Shankar vihar ≼🔝 Delhi door step delev...
Call Now ≽ 9953056974 ≼🔝 Call Girls In Shankar vihar ≼🔝 Delhi door step delev...Call Now ≽ 9953056974 ≼🔝 Call Girls In Shankar vihar ≼🔝 Delhi door step delev...
Call Now ≽ 9953056974 ≼🔝 Call Girls In Shankar vihar ≼🔝 Delhi door step delev...
 
John deere 425 445 455 Maitenance Manual
John deere 425 445 455 Maitenance ManualJohn deere 425 445 455 Maitenance Manual
John deere 425 445 455 Maitenance Manual
 
Delhi Call Girls Vikaspuri 9711199171 ☎✔👌✔ Whatsapp Hard And Sexy Vip Call
Delhi Call Girls Vikaspuri 9711199171 ☎✔👌✔ Whatsapp Hard And Sexy Vip CallDelhi Call Girls Vikaspuri 9711199171 ☎✔👌✔ Whatsapp Hard And Sexy Vip Call
Delhi Call Girls Vikaspuri 9711199171 ☎✔👌✔ Whatsapp Hard And Sexy Vip Call
 
How To Troubleshoot Mercedes Blind Spot Assist Inoperative Error
How To Troubleshoot Mercedes Blind Spot Assist Inoperative ErrorHow To Troubleshoot Mercedes Blind Spot Assist Inoperative Error
How To Troubleshoot Mercedes Blind Spot Assist Inoperative Error
 
Hot Modals Call Girls (Delhi) Dwarka9711199171✔️ High Class Service 100% Saf...
Hot Modals Call Girls (Delhi) Dwarka9711199171✔️ High Class  Service 100% Saf...Hot Modals Call Girls (Delhi) Dwarka9711199171✔️ High Class  Service 100% Saf...
Hot Modals Call Girls (Delhi) Dwarka9711199171✔️ High Class Service 100% Saf...
 

Caterpillar cat 320 d rr excavator (prefix gkl) service repair manual (gkl00001 and up)

  • 1. Service Repair Manual Models 320D RR and 320D LRR Excavator
  • 2. Shutdown SIS Previous Screen Product: EXCAVATOR Model: 320D RR EXCAVATOR GKL Configuration: 320D RR & 320D LRR Excavators GKL00001-UP (MACHINE) POWERED BY 3066 Engine Disassembly and Assembly 3064 and 3066 Engines for Caterpillar Built Machines Media Number -SENR5553-10 Publication Date -01/05/2012 Date Updated -15/05/2012 i01576856 Crankshaft - Remove SMCS - 1202-011 Removal Procedure Table 1 Required Tools Tool Part Number Part Description Qty A 6V-9120 Socket (1) 1 ( 1 ) Tool (A) is a 46 mm socket. Start By: A. Remove the front housing. Refer to Disassembly and Assembly, "Housing (Front) - Remove". B. Remove the crankshaft rear seal. Refer to Disassembly and Assembly, "Crankshaft Rear Seal - Remove". C. Remove the flywheel housing. Refer to Disassembly and Assembly, "Flywheel Housing - Remove and Install". D. Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install". NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. 1/5(W) w 2020/10/29 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...
  • 3. Illustration 1 g00604627 1. Remove two bolts (1) from oil supply tube (2). Remove oil supply tube (2) from the engine cylinder block. Illustration 2 g00604637 2. Check condition of the O-ring seal (3) on the oil supply tube (2). If the O-ring is damaged, use a new part for replacement. 2/5(W) w 2020/10/29 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...
  • 4. Illustration 3 g00604549 3. Install nut (4) and the washer onto the crankshaft. Use Tool (A) to turn the crankshaft. Illustration 4 g00604552 4. Remove nuts and bolts (5) that secure connecting rod caps (6) to the connecting rods. Remove connecting rod caps (6) from the connecting rods. Note: Be careful not to damage the bearings. Mark each connecting rod cap and the bearing in order to ensure installation in the original location. 5. Carefully push the connecting rods and the pistons into the top of bores. Illustration 5 g00604582 6. Remove bolts (7) that secure crankshaft main bearing caps (8) in position in the engine cylinder block. Remove crankshaft main bearing caps (8) from the engine. Note: Be careful not to damage the bearings. Mark each crankshaft main bearing cap and the bearing in order to ensure installation in the original location. 3/5(W) w 2020/10/29 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...
  • 5. Illustration 6 g00604584 7. Fasten a suitable lifting device and straps to crankshaft (9). Remove the crankshaft. The weight of the crankshaft for the 3064 engine is 84 kg (185 lb). The weight of the crankshaft for the 3066 engine is 99 kg (220 lb). Note: Be careful not to damage the finished surfaces on the crankshaft. Illustration 7 g00604687 8. Remove the upper halves of crankshaft main bearings (10). If necessary, remove thrust washers (11) . 4/5(W) w 2020/10/29 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...
  • 6. Illustration 8 g00604599 9. If necessary, use a hammer and a chisel to remove the wear sleeve (12) for the crankshaft rear seal. Hold the chisel at right angles to the surface of the wear sleeve. Tap the wear sleeve in three places. You can remove the wear sleeve once the tension is released. Note: When you are removing the wear sleeve, take extreme care not to damage the crankshaft. Note: Take extreme care not to damage the wear sleeve, if it is not necessary to remove the wear sleeve. Copyright 1993 - 2020 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Thu Oct 29 22:58:23 UTC+0800 2020 5/5(W) w 2020/10/29 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...
  • 7. Shutdown SIS Previous Screen Product: EXCAVATOR Model: 320D RR EXCAVATOR GKL Configuration: 320D RR & 320D LRR Excavators GKL00001-UP (MACHINE) POWERED BY 3066 Engine Disassembly and Assembly 3064 and 3066 Engines for Caterpillar Built Machines Media Number -SENR5553-10 Publication Date -01/05/2012 Date Updated -15/05/2012 i01568784 Crankshaft - Install SMCS - 1202-012 Installation Procedure Table 1 Required Tools Tool Part Number Part Description Qty A 6V-9120 Socket (1) 1 B 8T-5096 Dial Indicator 1 ( 1 ) Tool (A) is a 46 mm socket. NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. 1/5(W) w 2020/10/29 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...
  • 8. Illustration 1 g00604687 1. If the thrust washers were removed, then install a thrust washer (11) on the rear face of the crankshaft with the oil groove toward the outside. 2. Place the upper halves of crankshaft main bearings (10) in the cylinder block. Place the lower halves of the crankshaft main bearings in crankshaft main bearing caps. Install the bearings with the main bearing tabs in the correct position. Lubricate the bearings with clean engine oil. Illustration 2 g00604584 3. Lubricate the crankshaft journals with clean engine oil. Fasten a suitable lifting device and straps to crankshaft (9). The weight of the crankshaft for the 3064 engine is 84 kg (185 lb). The weight of the crankshaft for the 3066 engine is 99 kg (220 lb). Position crankshaft (9) onto the upper halves of the crankshaft main bearings. Note: Be careful not to damage the finished surfaces on the crankshaft. 2/5(W) w 2020/10/29 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...
  • 9. Illustration 3 g00604582 4. Install main bearings into main bearing caps (8). Install the bearings with the main bearing tabs in the correct position. Lubricate the bearings with clean engine oil. 5. Place the thrust washers on the rear main bearing cap. Install the rear main bearing cap and two seals on the rear journal of the cylinder block. 6. Install crankshaft main bearing caps (8). Put clean engine oil on the threads of the main bearing cap bolts. Install main bearing cap bolts (7). Tighten the bolts evenly to a torque of 137 ± 5 N·m (101 ± 4 lb ft). Note: Ensure that the crankshaft main bearing caps are installed in the original locations. 7. Cut off the excess length on the two seals on the rear journal of the cylinder block. Illustration 4 g00604753 8. Check the end play of the crankshaft with Tool (B). The end play must be 0.100 to 0.264 mm (0.0039 to 0.0104 inch). Refer to the Testing and Adjusting Module, "Basic Block" for more information on crankshaft end play. 3/5(W) w 2020/10/29 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...
  • 10. Illustration 5 g00604552 9. Apply a light coat of clean engine oil to the connecting rod bearing surfaces and to the connecting rod journals. Install the connecting rods onto the connecting rod journals. 10. Install the lower half of the connecting bearings into the corresponding connecting rod caps and install connecting rod caps (6) . Note: Align the tabs on the back of the connecting rod bearings with the tab grooves in the connecting rod caps. Install the pistons and connecting rods. Refer to Disassembly and Assembly, "Pistons and Connecting Rods - Install". Illustration 6 g00604549 11. Check for free crankshaft rotation by rotating the crankshaft for two complete revolutions. Use Tool (A) on crankshaft pulley nut (4) in order to rotate the crankshaft. 4/5(W) w 2020/10/29 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...
  • 11. Illustration 7 g00604637 12. Install O-ring seal (3) on oil supply tube (2) . Illustration 8 g00604627 13. Position oil supply tube (2). Install two bolts (1) in order to secure the oil supply tube to the cylinder block. End By: a. Install the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install". b. Install the flywheel housing. Refer to Disassembly and Assembly, "Flywheel Housing - Remove and Install". c. Install the front housing. Refer to Disassembly and Assembly, "Housing (Front) - Install". d. Install the crankshaft rear seal, if the crankshaft wear sleeve was removed. Refer to Disassembly and Assembly, "Crankshaft Rear Seal - Install". Copyright 1993 - 2020 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Thu Oct 29 22:59:18 UTC+0800 2020 5/5(W) w 2020/10/29 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...
  • 12. Shutdown SIS Previous Screen Product: EXCAVATOR Model: 320D RR EXCAVATOR GKL Configuration: 320D RR & 320D LRR Excavators GKL00001-UP (MACHINE) POWERED BY 3066 Engine Disassembly and Assembly 3064 and 3066 Engines for Caterpillar Built Machines Media Number -SENR5553-10 Publication Date -01/05/2012 Date Updated -15/05/2012 i01131265 Crankshaft Gear - Remove and Install SMCS - 1204-010-GE Removal Procedure Table 1 Required Tools Tool Part Number Part Description Qty A 1P-0820 Hydraulic Puller 1 9U-6600 Hand Hydraulic Pump 1 0S-2398 Step Plate 1 3H-0468 Puller Plate 4 8B-7549 Puller Leg 2 1B-4207 Full Nut 2 8B-7551 Bearing Puller 1 Start By: a. Remove the crankshaft. Refer to Disassembly and Assembly, "Crankshaft - Remove". 1/3(W) w 2020/10/29 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...
  • 13. Illustration 1 g00541880 1. Use Tool (A) to remove crankshaft gear (1) from crankshaft (2). Note: Do not remove the gear by tapping with a hammer. Note: Be careful not to damage the finished surfaces on the crankshaft. 2. Check the key on the crankshaft. If the key is damaged, use a new part for replacement. Installation Procedure NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. Always wear protective gloves when handling parts that have been heated. 1. Use an oven and heat the crankshaft gear to a temperature of about 100 °C (212 °F). The crankshaft gear is heated in order to ease installation of the crankshaft gear. Wear eye protection in order to prevent possible personal injury while performing the following steps. 2/3(W) w 2020/10/29 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...
  • 14. Note: Be careful not to damage the finished surfaces on the crankshaft. 2. Install the crankshaft gear on the end of the crankshaft. Ensure that the key in the crankshaft is aligned with the keyway in the gear. Tap lightly with a copper hammer until the crankshaft gear is seated. Ensure that the crankshaft gear is seated against the shoulder on the crankshaft. Note: Ensure that the timing marks of the crankshaft gear are on the front. End By: a. Install the crankshaft. Refer to Disassembly and Assembly, "Crankshaft - Install". Copyright 1993 - 2020 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Thu Oct 29 23:00:14 UTC+0800 2020 3/3(W) w 2020/10/29 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...
  • 15. Shutdown SIS Previous Screen Product: EXCAVATOR Model: 320D RR EXCAVATOR GKL Configuration: 320D RR & 320D LRR Excavators GKL00001-UP (MACHINE) POWERED BY 3066 Engine Disassembly and Assembly 3064 and 3066 Engines for Caterpillar Built Machines Media Number -SENR5553-10 Publication Date -01/05/2012 Date Updated -15/05/2012 i05977048 Bearing Clearance - Check SMCS - 1203-535; 1219-535 Measurement Procedure Table 1 Required Tools Tool Part Number Part Description Qty A 198-9142 Plastic Gauge (Green) 0.025 to 0.076 mm (0.001 to 0.003 inch) 1 198-9143 Plastic Gauge (Red) 0.051 to 0.152 mm (0.002 to 0.006 inch) 1 198-9144 Plastic Gauge (Blue) 0.102 to 0.229 mm (0.004 to 0.009 inch) 1 198-9145 Plastic Gauge (Yellow) 0.230 to 0.510 mm (0.009 to 0.020 inch) 1 Note: Plastic gauge may not be necessary when the engine is in the chassis. NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. 1/3(W) w 2020/10/29 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...
  • 16. Note: Cat does not recommend the checking of the actual bearing clearances particularly on small engines. This is because of the possibility of obtaining inaccurate results and the possibility of damaging the bearing or the journal surfaces. Each Cat engine bearing is quality checked for specific wall thickness. Note: The measurements should be within specifications and the correct bearings should be used. If the crankshaft journals and the bores for the block and the rods were measured during disassembly, no further checks are necessary. However, if the technician still wants to measure the bearing clearances, Tooling (A) is an acceptable method. Tooling (A) is less accurate on journals with small diameters if clearances are less than 0.10 mm (0.004 inch). NOTICE Lead wire, shim stock or a dial bore gauge can damage the bearing surfaces. The technician must be very careful to use Tooling (A) correctly. The following points must be remembered: • Ensure that the backs of the bearings and the bores are clean and dry. • Ensure that the bearing locking tabs are properly seated in the tab grooves. • The crankshaft must be free of oil at the contact points of Tooling (A). 1. Put a piece of Tooling (A) on the crown of the bearing that is in the cap. Note: Do not allow Tooling (A) to extend over the edge of the bearing. 2. Use the correct torque-turn specifications in order to install the bearing cap. Do not use an impact wrench. Be careful not to dislodge the bearing when the cap is installed. Note: Do not turn the crankshaft when Tooling (A) is installed. 3. Carefully remove the cap, but do not remove Tooling (A). Measure the width of Tooling (A) while Tooling (A) is in the bearing cap or on the crankshaft journal. Refer to Illustration 1. 2/3(W) w 2020/10/29 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...
  • 17. Illustration 1 g01152855 Typical Example 4. Remove all of Tooling (A) before you install the bearing cap. Note: When Tooling (A) is used, the readings can sometimes be unclear. For example, all parts of Tooling (A) are not the same width. Measure the major width in order to ensure that the parts are within the specification range. Refer to Specifications Manual, "Connecting Rod Bearing Journal" and Specifications Manual, "Main Bearing Journal" for the correct clearances. Copyright 1993 - 2020 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Thu Oct 29 23:01:10 UTC+0800 2020 3/3(W) w 2020/10/29 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...
  • 18. Shutdown SIS Previous Screen Product: EXCAVATOR Model: 320D RR EXCAVATOR GKL Configuration: 320D RR & 320D LRR Excavators GKL00001-UP (MACHINE) POWERED BY 3066 Engine Disassembly and Assembly 3064 and 3066 Engines for Caterpillar Built Machines Media Number -SENR5553-10 Publication Date -01/05/2012 Date Updated -15/05/2012 i01569484 Coolant Temperature Switch - Remove and Install SMCS - 1906-010 Removal Procedure Personal injury can result from hot coolant, steam and alkali. At operating temperature, engine coolant is hot and under pressure. The radiator and all lines to heaters or the engine contain hot coolant or steam. Any contact can cause severe burns. Remove cooling system pressure cap slowly to relieve pressure only when engine is stopped and cooling system pressure cap is cool enough to touch with your bare hand. Do not attempt to tighten hose connections when the coolant is hot, the hose can come off causing burns. Cooling System Coolant Additive contains alkali. Avoid contact with skin and eyes. NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. 1/3(W) w 2020/10/29 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...
  • 19. NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. 1. Drain the level of coolant from the radiator below the coolant temperature switch. Drain the coolant into a suitable container for storage or disposal. 2. Disconnect the electrical connection to the coolant temperature switch. Illustration 1 g00814982 3. Remove coolant temperature switch (1) from the elbow. Installation Procedure NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. 2/3(W) w 2020/10/29 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...
  • 20. 1. Apply a thin coat of 5P-3413 Pipe Sealant to coolant temperature switch (1) . Illustration 2 g00814982 2. Install coolant temperature switch (1). Tighten coolant temperature switch (1) to a torque of 7 to 12 N·m (62 to 106 lb in). 3. Reconnect the electrical connection to the coolant temperature switch. 4. Fill the cooling system with coolant to the correct level. Refer to the Operation and Maintenance Manual, "Refill Capacities" topic for more information. Copyright 1993 - 2020 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Thu Oct 29 23:02:06 UTC+0800 2020 3/3(W) w 2020/10/29 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...
  • 21. Thank you very much for your reading. Please Click Here. Then Get COMPLETE MANUAL. NO WAITING NOTE: If there is no response to click on the link above, please download the PDF document first and then click on it.
  • 22. Shutdown SIS Previous Screen Product: EXCAVATOR Model: 320D RR EXCAVATOR GKL Configuration: 320D RR & 320D LRR Excavators GKL00001-UP (MACHINE) POWERED BY 3066 Engine Disassembly and Assembly 3064 and 3066 Engines for Caterpillar Built Machines Media Number -SENR5553-10 Publication Date -01/05/2012 Date Updated -15/05/2012 i01569542 Engine Oil Pressure Switch - Remove and Install SMCS - 1924 Removal Procedure NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. Note: Disconnect all electrical connections to the engine oil pressure switch before proceeding. Mark all connections for later installation. 1/3(W) w 2020/10/29 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...
  • 23. Illustration 1 g00815016 1. Remove engine oil pressure switch (1) from the cylinder block. Installation Procedure NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. Illustration 2 g00815016 1. Install engine oil pressure switch (1) in the cylinder block. 2. Tighten engine oil pressure switch (1) to a torque of 7 to 12 N·m (62 to 106 lb in). Note: Reconnect all electrical connections to the engine oil pressure switch before you operate the engine. 2/3(W) w 2020/10/29 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...