This document provides workshop standard times for repair and renewal of parts for Agrofarm tractors. It includes sections for the fuel filter and pipes, blower, compressor, exhaust silencer for models with a platform and cab, clutch, and hydraulic shuttle. Repair times are provided for each part listed ranging from 0.2 to 11.9 days.

1. Workshop standard times
Temps de reparation
Reparatur-zeittafel
Agrofarm 85 -> 1001
Agrofarm 85 -> 5001
Agrofarm 100 -> 1001
Agrofarm 100 -> 5001
307.6059.3.6

2. Agrofarm 85->1001 85->5001 100->1001 100->5001
Section: ENGINE SUBAS: 16 Ref. 100
FUEL FILTER - PIPES
FILTRE A CARBURANT - CONDUITES
KRAFTSTOFFILTER - LEITUNGEN
Fig Part Nr Qty Description D�nomination Bezeichnung
Renewal time (d/h)
1 0.014.8692.3/10 1 bracket etrier buegel
2 2.1310.004.2 8 washer (8.4x16) rondelle scheibe
3 2.0112.205.2 2 screw (m 8 p.1.25x16) vis schraube
4 2.0112.211.2 6 screw (m 8 p.1.25x30) vis schraube
5 2.4319.290.0/10 1 precleaner prefiltre vorfilter
- T. = 0.7
=> 648
6 2.1560.012.0 8 gasket (16.2x22) joint dichtung
7 2.1549.258.0 1 spacer (16x25x18) entretoise zwischenrohr
8 0.014.8614.3 1 tube tuyau schlauch
9 2.3339.597.2/10 1 pipe union (m 16 p.1.5x50) raccord banjo einfuellstutzen
10 2.3339.322.2 1 pipe union raccord banjo einfuellstutzen
11 2.3332.004.2 3 pipe union (m 14 p.1.5x27) raccord banjo einfuellstutzen
12 2.1560.010.0 8 gasket (14.2x20) joint dichtung
13 0.014.8616.3/10 1 tube tuyau schlauch
14 0.014.8615.3 1 tube tuyau schlauch
15 2.3110.404.2 2 plug (m 16 p.1.5) bouchon stopfen
16 0.011.0332.0 2 clamp collier schlauchklemmen
17 2.1579.212.0 2 spacer (8.3x13.5x18) entretoise zwischenrohr
18 2.3332.005.2 1 pipe union (m 16 p.1.5) raccord banjo einfuellstutzen
307.6059.3.6 Sheet 1 F

3. Agrofarm 85->1001 85->5001 100->1001 100->5001
Section: ENGINE SUBAS: 19 Ref. 102
BLOWER
SOUFFLANTE
GEBL�SE
Fig Part Nr Qty Description D�nomination Bezeichnung
Renewal time (d/h)
1 0.015.1672.0 1 rotor blade helice ventilateur geblaese
- T. = 4.2 -> (0.7 + 3.5 [Cod. 0715])
2 0.013.9617.0 1 hub moyeu nabe
3 2.0112.207.2 4 screw (m 8 p 1.25x20) vis schraube
4 2.1474.009.2 4 spring washer (8) rondelle elastique federring
307.6059.3.6 Sheet 1 F

4. Agrofarm 85->1001 85->5001 100->1001 100->5001
Section: ENGINE SUBAS: 19 Ref. 103
COMPRESSOR
COMPRESSEUR
KOMPRESSOR
Fig Part Nr Qty Description D�nomination Bezeichnung
Renewal time (d/h)
1 0.000.0000.1 - not serviceable pas fournible nicht lieferbar
1.1 04428408.4 1 *air compressor compresseur air luftkompressor
- T. = 1.5
=> 649
1.2 04255095.4 1 *gear engrenage zahnrad
2 2.1475.003.2 3 washer (10.5x20) rondelle elastique elastiche scheibe
3 2.0112.311.2 3 screw (m 10 p.1.5x30) vis schraube
4 0.014.8296.3 1 tube tuyau schlauch
5 2.1560.010.0 2 gasket (14.2x20) joint dichtung
6 2.3335.006.2 1 pipe union (m 14 p.1.5) raccord banjo einfuellstutzen
7 2.1560.005.0 2 gasket (10.2x14) joint dichtung
8 2.3339.074.1 1 pipe union (m 10 p.1x19) raccord banjo einfuellstutzen
9 0.014.9049.3 1 tube tuyau schlauch
10 2.0112.205.2 1 screw (m 8 p.1.25x16) vis schraube
11 2.1310.004.2 1 washer (8.4x16) rondelle scheibe
12 2.1569.068.0 2 gasket (26.3x34x2) joint dichtung
13 2.3335.010.2 1 pipe union raccord banjo einfuellstutzen
14 0.014.9301.0 1 tube tuyau schlauch
15 2.6851.003.0 2 clamp (25-40) collier schlauchklemmen
307.6059.3.6 Sheet 1 F

5. Agrofarm 85->1001 85->5001 100->1001 100->5001
Section: ENGINE SUBAS: 56 Ref. 104
EXHAUST SILENCER - FOR MODELS WITH PLATFORM
SILENCIEUX D'ECHAPPEMENT - POUR TYPES AVEC PLATEFORME
AUSPUFFSCHALLD�MPFER - F�R MODELLEN MIT PLATTFORM
Fig Part Nr Qty Description D�nomination Bezeichnung
Renewal time (d/h)
1 0.014.7971.3/10 1 silencer silencieux schalldaempfer
- T. = 0.8
2 0.014.9346.4/10 1 discharge tube tuyau d'evacuation entleerungsrohr
- T. = 0.5
3 0.010.5018.0 1 clamp collier schlauchklemmen
4 0.014.7978.3 1 sump carter schutz
5 2.1310.004.2 4 washer (8.4x16) rondelle scheibe
6 2.1011.005.2 3 nut (m 8 p.1.25) ecrou mutter
7 2.0112.327.2 1 screw (m 10 p.1.5x90) vis schraube
8 2.1011.206.2 1 nut (m 10 p.1.5) ecrou mutter
9 2.1310.006.2 2 flat washer (10.5x20) rondelle plate unterlegscheibe
10 2.1470.006.2 1 lock washer (10) rondelle eventail zahnscheibe
11 2.0112.206.2 2 screw (m 8 p.1.25x18) vis schraube
12 0.010.9862.0 1 gasket joint dichtung
13 2.1475.002.2 1 conical washer (8.4x16) rondelle conique konische scheibe
14 2.1312.004.2 5 washer (9x24) rondelle dichtscheibe
15 2.1549.169.0 2 spacer (14.5x22x2) entretoise zwischenrohr
16 2.1121.005.2 2 selflock nut (m 8 p.1.25) ecrou autobloquant selbstschlussmutter
17 0.014.9348.0/10 1 small plate plaquette plaettchen
18 0.010.1054.2/10 1 support support halter
- T. = 0.2
19 2.0112.209.2 3 screw (m 8 p 1.25x25) vis schraube
20 0.014.9347.3 1 bracket etrier buegel
21 2.1579.994.2 1 spacer (8.5x14x7) entretoise zwischenrohr
307.6059.3.6 Sheet 1 F

6. Agrofarm 85->1001 85->5001 100->1001 100->5001
Section: ENGINE SUBAS: 56 Ref. 105
EXHAUST SILENCER - FOR MODELS WITH CAB
SILENCIEUX D'ECHAPPEMENT - POUR TYPES AVEC CABINE
AUSPUFFSCHALLD�MPFER - F�R MODELLEN MIT KABINE
Fig Part Nr Qty Description D�nomination Bezeichnung
Renewal time (d/h)
1 0.014.7971.3/10 1 silencer silencieux schalldaempfer
- T. = 0.8
2 0.014.7974.4/10 1 discharge tube tuyau d'evacuation entleerungsrohr
- T. = 0.5
3 0.010.5018.0 1 clamp collier schlauchklemmen
4 0.014.7978.3 1 sump carter schutz
5 2.1310.004.2 4 washer (8.4x16) rondelle scheibe
6 2.1011.105.2 3 nut (m 8 p.1.25) ecrou mutter
7 2.0112.327.2 1 screw (m 10 p.1.5x90) vis schraube
8 2.1011.206.2 1 nut (m 10 p.1.5) ecrou mutter
9 2.1310.006.2 2 flat washer (10.5x20) rondelle plate unterlegscheibe
10 2.1470.006.2 1 lock washer (10) rondelle eventail zahnscheibe
11 2.0112.206.2 2 screw (m 8 p.1.25x18) vis schraube
12 0.010.9862.0 1 gasket joint dichtung
13 2.1475.002.2 1 conical washer (8.4x16) rondelle conique konische scheibe
14 2.1312.004.2 3 washer (9x24) rondelle dichtscheibe
15 2.1549.169.0 2 spacer (14.5x22x2) entretoise zwischenrohr
16 2.1121.005.2 1 selflock nut (m 8 p.1.25) ecrou autobloquant selbstschlussmutter
17 0.014.9253.0/10 1 small plate plaquette plaettchen
18 0.010.1054.2/10 1 support support halter
- T. = 0.2
19 2.0112.209.2 1 screw (m 8 p 1.25x25) vis schraube
20 0.014.9242.3 1 bracket petit etrier buegel
21 2.1579.994.2 1 spacer (8.5x14x7) entretoise zwischenrohr
307.6059.3.6 Sheet 1 F

7. Agrofarm 85->1001
Section: GEAR SUBAS: 23 Ref. 114
CLUTCH
EMBRAYAGE
KUPPLUNG
Fig Part Nr Qty Description D�nomination Bezeichnung
Renewal time (d/h)
1 0.014.9017.3 1 clutch assy embrayage complet kompl.kupplung
2 0.014.9016.3 1 clutch disc disque d'embrayage kupplungsscheibe
- T. = 9.4 -> (0.5 + 8.9 [Cod. 0101])
3 2.1699.173.0 4 pin (7.9x18) goupille stift
4 2.1475.002.2 8 conical washer (8.4x16) rondelle conique konische scheibe
5 2.0112.207.2 8 screw (m 8 p 1.25x20) vis schraube
307.6059.3.6 Sheet 1 F

8. Agrofarm 100->1001
Section: GEAR SUBAS: 23 Ref. 115
CLUTCH (13")
EMBRAYAGE (13")
KUPPLUNG (13")
Fig Part Nr Qty Description D�nomination Bezeichnung
Renewal time (d/h)
1 0.012.7094.3 1 clutch assy (13") embrayage complet kompl.kupplung
- T. = 9.4 -> (0.5 + 8.9 [Cod. 0101])
2 0.012.7095.3/10 1 clutch disc (13") disque d'embrayage kupplungsscheibe
4 2.1470.004.2 8 lock washer (8) rondelle eventail zahnscheibe
5 2.0112.207.2 8 screw (m 8 p 1.25x20) vis schraube
6 2.1699.173.0 2 pin (7.9x18) goupille stift
307.6059.3.6 Sheet 1 F

9. Agrofarm 85->5001
Section: GEAR SUBAS: 32 Ref. 116
HYDRAULIC SHUTTLE
INVERSEUR HYDRAULIQUE
HYDRAULISCHES WENDEGETRIEBE
Fig Part Nr Qty Description D�nomination Bezeichnung
Renewal time (d/h)
1 0.014.4020.4 1 dumper dumper schwingungsdaempfer
- T. = 9.2 -> (0.3 + 8.9 [Cod. 0101])
2 2.1480.015.2 8 washer (10) rondelle scheibe
3 2.0399.093.1/10 8 screw vis schraube
6 2.0312.310.2 9 screw (m 10 p.1.5x30) vis schraube
50 0.000.0000.1 - not serviceable pas fournible nicht lieferbar
50.4 0.013.9374.3/40 1 *cover couvercle deckel
50.4.3 2.0512.303.2 4 **screw vis schraube
50.4.4 2.0512.102.7 2 **grain (m 6 p.1x8) grain stift
50.7 2.1539.228.0/10 1 *'o' ring bague d'etancheite dichtring
- T. = 11.9 -> (0.3 + 11.6 [Cod. 0215])
50.8 2.1529.166.0 1 *'o' ring bague d'etancheite dichtring
- T. = 9.6 -> (0.7 + 8.9 [Cod. 0101])
50.12 0.013.5434.3/60 1 *drum tambour trommel
50.12.2 2.0512.202.7 2 **screw (m 8 p.1.25x8) vis schraube
50.15 2.2725.050.0 1 *roller cage cage a rouleaux lager gitter
50.16 2.1423.039.7 1 *snoulder anneau d'epaulement distanzring
50.17 2.1499.111.0 4 *'o' ring bague d'etancheite dichtring
- T. = 13.1 -> (1.5 + 11.6 [Cod. 0215])
50.19 2.0312.219.2 10 *screw (m 8 p.1.25x65) vis schraube
50.21 0.012.9724.0/50 1 *ring anneau ring
50.22 2.0312.103.2 2 *screw (m 6 p.1x14) vis schraube
50.23 0.013.2921.3/30 2 *clutch disc disque d'embrayage kupplungsscheibe
- T. = 14.6 -> (3.0 + 11.6 [Cod. 0215])
- T. = 15.6 -> (4.0 + 11.6 [Cod. 0215])
50.24 2.4099.517.0 8 *spring ressort feder
307.6059.3.6 Sheet 1

10. Agrofarm 85->5001
Section: GEAR SUBAS: 32 Ref. 116
HYDRAULIC SHUTTLE
INVERSEUR HYDRAULIQUE
HYDRAULISCHES WENDEGETRIEBE
Fig Part Nr Qty Description D�nomination Bezeichnung
Renewal time (d/h)
50.25 0.012.9746.0/30 2 *piston piston kolben
- T. = 15.1 -> (3.5 + 11.6 [Cod. 0215])
50.26 2.1539.236.0 2 *'o' ring bague d'etancheite dichtring
50.27 2.1539.230.0/10 2 *'o' ring bague d'etancheite dichtring
50.28 2.4019.784.1 10 *spring (3.6x16x62.5) ressort feder
50.29 2.1659.522.0 10 *pin axe bolzen
50.30 2.1499.210.0 1 *spring ressort feder
50.31 2.2020.009.0 1 *ball bearing roulement a billes kugellager
50.32 0.013.5485.0/30 1 *hub moyeu nabe
50.33 2.2999.228.0 1 *roller cage cage a rouleaux lager gitter
50.34 0.013.5484.0/30 1 *hub moyeu nabe
50.45 2.3120.009.4 3 *plug (m 14 p.1.5) bouchon stopfen
50.46 2.1423.044.7 1 *ring anneau ring
307.6059.3.6 Sheet 2 F

11. Agrofarm 85->5001
Section: GEAR SUBAS: 32 Ref. 117
HYDRAULIC SHUTTLE
INVERSEUR HYDRAULIQUE
HYDRAULISCHES WENDEGETRIEBE
Fig Part Nr Qty Description D�nomination Bezeichnung
Renewal time (d/h)
41 2.1532.035.0 12 'o' ring (14x1.78) bague d'etancheite dichtring
42 0.014.9808.0 3 tube tuyau schlauch
- T. = 12.0 -> (0.4 + 11.6 [Cod. 0215])
50 0.000.0000.1 - not serviceable pas fournible nicht lieferbar
50.6 2.0312.310.2 7 *screw (m 10 p.1.5x30) vis schraube
50.9 0.013.9197.3/40 1 *support support halter
- T. = 16.6 -> (5.0 + 11.6 [Cod. 0215])
50.9.4 2.0512.102.7 4 **grain (m 6 p.1x8) grain stift
50.10 2.1532.024.0 2 *ring anneau ring
50.17 2.1499.111.0 4 *'o' ring bague d'etancheite dichtring
- T. = 16.6 -> (5.0 + 11.6 [Cod. 0215])
50.18 0.013.5435.3/40 1 *hub moyeu nabe
- T. = 16.6 -> (5.0 + 11.6 [Cod. 0215])
50.18.2 2.0512.202.7 2 **screw (m 8 p.1.25x8) vis schraube
50.20 2.1655.410.0 2 *pin goupille stift
50.25 0.012.9746.0/30 2 *piston piston kolben
50.26 2.1539.236.0 2 *'o' ring bague d'etancheite dichtring
50.27 2.1539.230.0/10 2 *'o' ring bague d'etancheite dichtring
50.35 2.2020.011.0 2 *bearing roulement lager
50.36 2.1429.069.7 1 *circlip anneau elastique sicherungsring
50.37 2.1422.037.7 1 *ring (60x1.5) anneau ring
50.40 0.013.5355.0 1 *spacer entretoise zwischenrohr
51 2.1560.014.0 1 gasket (18.2x24x1.5) joint dichtung
52 2.7099.996.0 1 speed sensor capteur de vitesse geschwindigkeit
- T. = 0.6 -> (0.3 + 0.3 [Cod. 0902])
53 0.014.9807.0 1 small block bloc einstell-block
54 2.0312.212.2 3 screw (m 8 p.1.25x35) vis schraube
55 2.1539.142.0 3 'o' ring bague d'etancheite dichtring
56 2.7099.999.0 1 speed sensor capteur de vitesse geschwindigkeit
57 2.1310.002.2 1 flat washer (6.4x12.5) rondelle plate unterlegscheibe
58 2.0112.003.2 1 screw (m 6 p.1x12) vis schraube
59 0.014.9596.0 1 gear wheel roue dentee zahnrad
307.6059.3.6 Sheet 1

12. Agrofarm 85->5001
Section: GEAR SUBAS: 32 Ref. 117
HYDRAULIC SHUTTLE
INVERSEUR HYDRAULIQUE
HYDRAULISCHES WENDEGETRIEBE
Fig Part Nr Qty Description D�nomination Bezeichnung
Renewal time (d/h)
60 2.1499.242.7 1 circlip anneau elastique sicherungsring
61 2.2044.010.0 1 ball bearing roulement a billes kugellager
62 2.1410.026.7 1 circlip anneau elastique sicherungsring
63 2.1529.024.0 1 'o' ring (65x90x13) bague d'etancheite dichtring
307.6059.3.6 Sheet 2 F

13. Agrofarm 100->5001
Section: GEAR SUBAS: 32 Ref. 118
HYDRAULIC SHUTTLE
INVERSEUR HYDRAULIQUE
HYDRAULISCHES WENDEGETRIEBE
Fig Part Nr Qty Description D�nomination Bezeichnung
Renewal time (d/h)
1 0.014.4020.4 1 dumper dumper schwingungsdaempfer
- T. = 9.2 -> (0.3 + 8.9 [Cod. 0101])
2 2.1480.015.2 8 washer (10) rondelle scheibe
3 2.0399.093.1/10 8 screw vis schraube
5 2.0312.310.2 9 screw (m 10 p.1.5x30) vis schraube
50 0.000.0000.1 - not serviceable pas fournible nicht lieferbar
50.4 0.013.9374.3/40 1 *cover couvercle deckel
50.4.3 2.0512.303.2 4 **screw vis schraube
50.4.4 2.0512.102.7 2 **grain (m 6 p.1x8) grain stift
50.7 2.1539.228.0/10 1 *'o' ring bague d'etancheite dichtring
- T. = 11.9 -> (0.3 + 11.6 [Cod. 0215])
50.8 2.1529.166.0 1 *'o' ring bague d'etancheite dichtring
- T. = 9.2 -> (0.3 + 8.9 [Cod. 0101])
50.12 0.015.0344.3 1 *box boitier gehaeuse
50.12.3 2.0512.202.7 2 **screw (m 8 p.1.25x8) vis schraube
50.15 2.2725.050.0 1 *roller cage cage a rouleaux lager gitter
50.16 2.1423.039.7 1 *snoulder anneau d'epaulement distanzring
50.17 2.1499.111.0 4 *'o' ring bague d'etancheite dichtring
- T. = 13.1 -> (1.5 + 11.6 [Cod. 0215])
50.19 2.0312.222.2 10 *screw (m 8 p.1.25x80) vis schraube
50.21 0.012.9724.0/50 1 *ring anneau ring
50.22 2.0312.103.2 2 *screw (m 6 p.1x14) vis schraube
50.23 0.014.9919.3 2 *clutch disc disque d'embrayage kupplungsscheibe
- T. = 14.6 -> (3.0 + 11.6 [Cod. 0215])
- T. = 15.6 -> (4.0 + 11.6 [Cod. 0215])
50.24 2.4099.517.0 12 *spring ressort feder
307.6059.3.6 Sheet 1

14. Agrofarm 100->5001
Section: GEAR SUBAS: 32 Ref. 118
HYDRAULIC SHUTTLE
INVERSEUR HYDRAULIQUE
HYDRAULISCHES WENDEGETRIEBE
Fig Part Nr Qty Description D�nomination Bezeichnung
Renewal time (d/h)
50.25 0.014.9892.0 2 *piston piston kolben
50.26 2.1539.236.0 2 *'o' ring bague d'etancheite dichtring
50.27 2.1539.230.0/10 2 *'o' ring bague d'etancheite dichtring
50.28 2.4019.807.1 10 *spring ressort feder
50.29 2.1659.524.0 10 *pin axe bolzen
50.30 2.1499.243.7 1 *spring ressort feder
50.31 2.2012.011.0 1 *bearing roulement lager
50.32 0.014.9988.0 1 *hub moyeu nabe
50.33 2.2999.228.0 1 *roller cage cage a rouleaux lager gitter
50.34 0.014.9985.0 1 *hub moyeu nabe
50.45 2.3120.009.4 3 *plug (m 14 p.1.5) bouchon stopfen
50.46 2.1423.044.7 1 *ring anneau ring
307.6059.3.6 Sheet 2 F

15. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.

16. Agrofarm 100->5001
Section: GEAR SUBAS: 32 Ref. 119
HYDRAULIC SHUTTLE
INVERSEUR HYDRAULIQUE
HYDRAULISCHES WENDEGETRIEBE
Fig Part Nr Qty Description D�nomination Bezeichnung
Renewal time (d/h)
41 2.1532.035.0 12 'o' ring (14x1.78) bague d'etancheite dichtring
42 0.014.9808.0 3 tube tuyau schlauch
- T. = 12.0 -> (0.4 + 11.6 [Cod. 0215])
50 0.000.0000.1 - not serviceable pas fournible nicht lieferbar
50.6 2.0312.310.2 7 *screw (m 10 p.1.5x30) vis schraube
50.9 0.015.0170.3 1 *support support halter
- T. = 16.6 -> (5.0 + 11.6 [Cod. 0215])
50.9.4 2.0512.102.7 4 **grain (m 6 p.1x8) grain stift
50.10 2.1532.024.0 2 *ring anneau ring
50.17 2.1499.111.0 4 *'o' ring bague d'etancheite dichtring
- T. = 16.6 -> (5.0 + 11.6 [Cod. 0215])
50.18 0.014.9927.3/10 1 *box boitier gehaeuse
- T. = 16.6 -> (5.0 + 11.6 [Cod. 0215])
50.18.2 2.0512.202.7 2 **screw (m 8 p.1.25x8) vis schraube
50.20 2.1655.410.0 2 *pin goupille stift
50.25 0.014.9892.0 2 *piston piston kolben
50.26 2.1539.236.0 2 *'o' ring bague d'etancheite dichtring
50.27 2.1539.230.0/10 2 *'o' ring bague d'etancheite dichtring
50.35 2.2012.014.0 2 *bearing roulement lager
50.36 2.1429.074.7 2 *circlip anneau elastique sicherungsring
50.37 2.1422.039.7 1 *ring (62.6x2.3) anneau ring
51 2.1560.014.0 1 gasket (18.2x24x1.5) joint dichtung
52 2.7099.996.0 1 speed sensor capteur de vitesse geschwindigkeit
- T. = 0.8 -> (0.5 + 0.3 [Cod. 0902])
53 0.014.9807.0 1 small block bloc einstell-block
54 2.0312.212.2 3 screw (m 8 p.1.25x35) vis schraube
55 2.1539.142.0 3 'o' ring bague d'etancheite dichtring
56 2.7099.999.0 1 speed sensor capteur de vitesse geschwindigkeit
57 2.1310.002.2 1 flat washer (6.4x12.5) rondelle plate unterlegscheibe
58 2.0112.003.2 1 screw (m 6 p.1x12) vis schraube
59 0.014.9596.0 1 gear wheel roue dentee zahnrad
60 2.1499.242.7 1 circlip anneau elastique sicherungsring
307.6059.3.6 Sheet 1

17. Agrofarm 100->5001
Section: GEAR SUBAS: 32 Ref. 119
HYDRAULIC SHUTTLE
INVERSEUR HYDRAULIQUE
HYDRAULISCHES WENDEGETRIEBE
Fig Part Nr Qty Description D�nomination Bezeichnung
Renewal time (d/h)
61 2.2044.010.0 1 ball bearing roulement a billes kugellager
62 2.1410.026.7 1 circlip anneau elastique sicherungsring
63 2.1529.024.0 1 'o' ring (65x90x13) bague d'etancheite dichtring
307.6059.3.6 Sheet 2 F

18. Agrofarm 85->1001 100->1001
Section: GEAR SUBAS: 65 Ref. 120
CLUTCH CONTROL
COMMANDE D'EMBRAYAGE
KUPPLUNGSBET�TIGUNG
Fig Part Nr Qty Description D�nomination Bezeichnung
Renewal time (d/h)
1 0.011.0824.3/10 1 pedal pedale pedal
1.8 2.1559.120.0/10 2 *bushing (20x23x15) bague lagerbuchse
2 0.169.6557.0 1 cover couverture deckelplatte
3 2.1699.404.2/10 1 pin axe bolzen
4 0.255.6538.4/50 1 pump pompe pumpe
- T. = 2.2 -> (1.5 + 0.7 [Cod. 0707])
=> 650
5 2.1630.614.0 1 roll pin (6x36) goupille elastique federstift
6 0.009.3951.0/10 1 link junelle lasche
7 2.4049.200.2/30 1 spring ressort feder
8 2.1310.004.2 1 washer (8.4x16) rondelle scheibe
9 2.1430.007.2 1 circlip (6) anneau elastique sicherungsring
10 2.1671.408.2 1 pin (10x30) axe bolzen
11 2.1310.006.2 2 flat washer (10.5x20) rondelle plate unterlegscheibe
12 2.1690.308.2 1 split pin (3.2x20) goupille splint
13 2.6857.019.0 2 clamp (14) collier schlauchklemmen
14 0.012.6343.0 - tube tuyau schlauch
15 2.1311.012.2 2 flat washer (20) rondelle plate unterlegscheibe
16 2.1470.002.2 2 lock washer (6) rondelle eventail zahnscheibe
17 2.1011.203.2 2 nut (m 6) ecrou mutter
18 2.0112.204.2 2 screw (m 8 p.1.25x14) vis schraube
19 2.1310.004.2 2 washer (8.4x16) rondelle scheibe
20 0.011.0860.0 1 pin axe bolzen
21 2.1470.006.2 1 lock washer (10) rondelle eventail zahnscheibe
22 2.1011.106.2 1 nut (m 10 p.1.5) ecrou mutter
23 0.257.6662.2 1 clamp collier schlauchklemmen
24 0.255.6694.4/20 1 tank reservoir tank
- T. = 0.3
24.1 0.257.6654.3/10 1 *plug bouchon stopfen
25 2.1310.002.2 1 flat washer (6.4x12.5) rondelle plate unterlegscheibe
26 2.0112.007.2 1 screw (m 6 p.1x20) vis schraube
307.6059.3.6 Sheet 1 F