This document describes various Raspberry Pi products and accessories sold by BotnLife, an online shop in Thailand. It includes the Raspberry Pi Model B+ computer with 512MB RAM, starter packs for beginners, enclosure cases for the Pi like the Pibow Coupe and Rainbow Pibow, HDMI displays in various sizes that connect to the Pi, and information for ordering and contacting BotnLife.
3. Raspberry Pi Model B + 512MB RAM
• Raspberry Pi Raspberry Pie-board computer was developed
in England to build a learning computer. Designed
by Broadcom BCM 2 835 System on a Chip
(SoC) processors, ARM 1176th JZF-S 700 MHz, VideoCore IV
GPU, and memory size. 512 MB paddle designed without
memory. (Hard disk drive or solid-state drives), but rely on
the SD card to boot and to a storage unit.
• Raspberry Pi Model B + upgrade from the original. The
port USB rise ,increasing pin GPIO, improve the capacity to
better , more holes drilled four holes for assembly and
numerous other teams called raspberry pie, take
suggestions. Collected over three years to develop the
model B +this. And the same price!
5. Raspberry Pi Model B+ Starter Pack
• You are about to start a project out of the rowing
course you have to solder, without programming. They
must also wear a heart inventor and much more, we
need to start your first step is very simple. We collect
the devices that we think is best for a beginner kit is
easy to use.
• This unit will gather important such as the power unit,
Raspbian SD card, Case, WiFi adapter, console cable,
and other components for the initial prototype for this
is the crucial point that you begin to jump.
• Accessories are not included in the Raspberry Pie B +!
6. Pibow Coupé - Enclosure for Raspberry Pi
Model B+ Computers
7. Pibow Coupé - Enclosure for
Raspberry Pi Model B+ Computers
• Case Pibow Coupé design for protecting raspberry pie
Model B + with a slim and transparent acrylic cover on
top of the pie for show.
• Produced by the use of laser-cut acrylic and be stacked
to protect your pie. You can also access the main GPIO
ports and the camera has the same case Coupé weighs
only 61 grams, extremely light.
• This case is not designed to be used with the Model A
and B when ordering, you will receive only the case for
excluding the raspberry pie.
9. Rainbow Pibow - Enclosure for
Raspberry Pi Model B+
• Customize your pie with a rainbow Rainbow Pibow
Enclosure This case is the case with rich
colors. Raspberry pie for protecting your B +.
• Produced by the use of laser-cut acrylic and be stacked
to protect your pie. And closed with a final layer of
clear acrylic. Make timeless, durable and distinguished
by colors. The case is lightweight and can be attached
to any surface. You can also access the camera and
GPIO port is unchanged.
• This case is not designed to be used with the Model A
and B when ordering, you will receive only the case for
excluding the raspberry pie.
11. HDMI 4 Pi - 7" Display 1280x800
(720p) IPS - HDMI/VGA/PAL/NTSC
• TV screen resolutions up to 1280x800 for pies screen 7
"(17.8 cm) and easy to connect via the DC transformer. And
connect the digital via HDMI or VGA control buttons on the
front for you to adjust the brightness, color, contrast with
your purchase, you get a screen, transformers, and stand,
which can be assembled by using 4 screws. and the bottom
has a compartment for connecting the camera to a 1 / 4-20
In addition to sharing the pie then. You can also work with
other devices through HDMI, VGA or NTSC / PAL output for
connection to the site. You can adjust the config.txt more
details, read more here.
• You can connect to a 5-24V DC power from the transformer
9VDC you get when ordering.
13. HDMI 4 Pi: 5" Display (no Touch)
w/Mini Driver - 800x480 HDMI
• A monitor screen size of 5 "high resolution 800x480 for
embedded system wants to monitor small and
affordable. Designed to screen works with a driver board that
can draw power from a USB port, the TTL with the board works
with HDMI, which can be connected to a paddle, or HDMI
device, such as BeagleBone Black can be used immediately when
connected via USB. to supply 5V, 500mA.
• Because non-IPS (In Plane Switching) makes it ideal for a
straight-sided only. If you want to view multiple angles We
suggest you use the HDMI IPS 7 "or 10".
• The controller that comes with the PCB to adjust the brightness,
color, contrast, and is available as a signal input as well.
• In addition to sharing the pie then. You can also work with other
devices through an HDMI connection with a paddle.
15. Raspberry Pi
Products & Accessories Order Online
If you have any questions, need advice or Order, Payment
Bots and Lifestyle Ltd
✔ Address: 51/9 Moo 7. Rat Development (Bangkok) Road
/ Saphan Sung Bangkok 10240, Thailand
✔ Web: www.botnlife.com
✔ Email: customercare@botnlife.com
✔ Line ID: botnlife
✔ Phone: 0972584994
✔ Facebook Page: www.facebook.com/botnlife