1. PearsonDental
Please call 800-535-4535 ext. 6
or 818-833-7701
www.pearsondental.com
Precision engineered to offer the power and reliability required to perform clinical procedures.
The new Pana-Max PLUS turbine cartridge delivers increased smoothness,
while the bur retention system has been engineered to securely retain the bur
under increased torque loads.
High performance reliable handpieces
at an affordable price
Power . Performance.Reliability
Every feature of PANA-MAX handpieces is precision engineered to deliver enhanced performance with the
reliability and durability NSK users expect. The cost versus performance ratio puts the PANA-MAX series at the highest level within its class.
NSK Pana-Max Standard - PAX-SU M4 NSK Pana-Max Torque - PAX-TU M4
TORQUE HEAD
Air Motors
MODEL EX-204C M4
EX Series Contra Angle
MODEL NAC-EC
EX Series Straight Handpieces
MODEL EX-6B
STANDARDHEAD N10-21-74 N10-21-76
NSK Pana-Max Plus Standard PAP-SU M4NSK Pana-Max Plus Mini PAP- MU M4
MINIATURE HEAD STANDARDHEADN10-21-04 N10-21-064-Hole4-Hole
4-Hole4-Hole
The patented NSK Clean Head System
is a special mechanism designed to
automatically prevent the entry of oral
uids and other contaminants into the
handpiece head prolonging the life of
the bearings.
Clean Head System NSK “ISB” Integrated Shaft Bearings
In the NSK ISB, the shaft itself forms the
inner race. Unication of the shaft and the
inner race provide higher rigidity which in
reduces vibration and guarantees more
accurate and consistent cutting.
Quattro Water Spray
The NSK Quattro Water Spray effectively
cools the entire surface of the bur with a
highly cooling effect, leaving no areas
untreated.
Cartridge Replacement
Cartridges are easily replaced in your
practice helping you to control cost and
down-time. The replacement cartridge
incorporates the spray holes to guarantee
cartridge and water spray always work
well together.
N10-00-55
NSK Slow Speed Kit
4-Hole
Speed : 380,000~450,000 min-1
Head Size : ø10.6 x H12.4 mm
Speed : 360,000~430,000 min-1
Head Size : ø12.1 x H13.3 mm
Speed : 400,000~450,000 min-1
Head Size : ø10.3 x H13.5 mm
Speed : 320,000~370,000 min-1
Head Size : ø12.0 x H13.6 mm
• Stainless Steel Body • Ceramic Bearings
• Clean Head System • Push Button Chuck
• Single Spray
MODEL EX-6B
• For CA burs (ø2.35) • Latch type
• Max Speed: 30,000 min-1
MODEL NAC-EC
• For HP burs (ø2.35) • Clean Head system
• Max Speed: 40,000 min-1
•Midwest 4 hole / Max. 20,000 min-1
MODEL EX-204C M4
Push Button Autochuck Push Button Autochuck
Push Button Autochuck Push Button Autochuck