CV of Professor Dr. Yehia Haddad

August 15, 2016
CURRICULUM VITAE
a) NAME AND ADDRESS:
Professor Dr. Yehia Haddad, P. Eng.
Email: yhaddad@uottawa.ca; aesatema@gmail.com/
https://www.linkedin.com/wvmx/profile/rankings?trk=wvmx-profile/
b) DEGREES:
Ph.D. Mechanical Engineering, McGill University, Canada, 1975.
M. Sc. Mechanical Engineering, Cairo University, Egypt, 1971.
B. Sc. Mechanical Engineering, Cairo University, Egypt, 1964.
c) EMPLOYMENT HISTORY:
2002 - Founder and President of Advanced Engineering Solutions
[AES.COM]
Ottawa, CANADA
K1C 5P2
1989- Full Professor, Mechanical Engineering, University of Ottawa,
Ottawa, ONTARIO, CANADA
K1N 6N5.
Member of Faculty of Graduate and Postdoctoral Studies, University
of Ottawa.
1982-89 Associate Professor, Mechanical Engineering, University of Ottawa.
1978-82 Consultant (Engineering & Corporate Productivity), Westinghouse
Canada Inc., Hamilton, CANADA, and Westinghouse USA,
Baltimore, MD, USA.
1976-78 Post-doctoral Fellow, Mechanical Engineering, McMaster University,
Hamilton, CANADA.
1975-76 Project Engineer, Velan Engineering Inc., Montreal, CANADA.
1972-75 Ph. D. Program, McGill University, Montreal, CANADA.
1964–72 Suez Canal Authority (Professional Engineer (Scientific research and
production).
d) ACADEMIC AWARDS:
DFG (Germany) Mercator Visiting Professor Fellowship award:
TUD - Technical University of Darmstadt, Germany. 2007– 09
Tokyo University (Tokyo, Japan): Visiting Professorship
Centre of Excellence award 2006
Helsinki University of Technology (Helsinki, Finland) -
Research Visiting Professorship. 2000 – 01

August 15, 2016 Professor Dr. Y. M. Haddad, P. Eng.
-2-
Tsukuba University (Tsukuba, Japan) –
Research Visiting Professorship. 2001
Université du Maine (Le Mans, France) –
Research Visiting Professorship. 2001
Nanyang Technological University (Singapore) –
Research Visiting Professorship. 1990 - 01
The Norwegian Research Council for Sciences and
Humanities - Research Fellowship. 1989
Ris National Laboratory, (Roskilde, Denmark) –
Research Fellowship. 1989
McGill University Dean's Honour List,
Faculty of Engineering, Ph.D. Convocation. 1975
PPRIC (Pulp and Paper Research Institute of Canada) –
Graduate Studies Research Award 1972 - 75
Ministry of Education (Egypt), Excellence Awards
(Six Excellence Awards). 1956 – 59
e) SCHOLARLY AND PROFESSIONAL ACTIVITIES (Since 2000 only):
2007 – Present Editor of AES Technical Reviews International Journal Series:
1) Part A – International Journal of Nano and Advanced Industrial
Materials (IJNAEM) – ISSN 1916-5358.
2) Part B –International Journal of Advances in Mechanics and
Applications of Industrial Materials (IJAMAIM) – ISSN 1718-5505.
3) Part C – International Journal of Advances and Trends in
Engineering Materials and their Applications (IJATEMA) – ISSN
1916-5366.
4) Part D – International Journal of Reliability and Safety of
Engineering Systems and Structures (IJRSESS) – ISSN 1916-5374.
2007 – 09 Visiting Professor at Technical University of Darmstadt,
Darmstadt, Germany, under DFG (Germany) Mercator Visiting
Professor Fellowship.
2007 – Present Chair of the following scientific / engineering international
conferences and Editor of pertinent proceedings:
2016 - Chair, TORONTO’2016 AES-ATEMA 29th
International
Conference, on Advances and Trends in Engineering Materials and
their Applications (Toronto, CANADA: July 04 – 08, 2016).
- Chair, MONTREAL’2016 AES-ATEMA 28th
Int. Conference
(Montreal, CANADA: June 20 – 24, 2016).
- Chair, RIO DE JANEIRO’2016 AES-ATEMA 27th
Int. Conference
(Rio-De-Janeiro, BRAZIL: MAY 02 – 06, 2016).

-3-
2015 - Chair, OTTAWA’2015 AES-ATEMA 26th
Int. Conference (Ottawa,
CANADA: October 12 – 16, 2015).
- Chair, TORONTO’2016 AES-ATEMA 25th
Int. Conference
(Toronto, CANADA: August 10 – 14, 2015).
- Chair: MONTREAL’2015 AES-ATEMA 22th
Int. Conference
(Montreal, CANADA: June 15 – 19, 2015).
2014 - Chair, CAN’2014 AES-ATEMA 19th
Int. Conference (Ottawa,
CANADA: October 06 – 10, 2014).
- Chair, CAN’2014 AES-ATEMA 18th
Int. Conference (Toronto,
CANADA: August 11 - 15, 2014).
- Chair, CAN’2014 AES-ATEMA .17th
Int. Conference (Montreal,
CANADA, June 16 - 20, 2014).
2013 - Chair, VANCOUVER’2013 AES-ATEMA 15th Int. Conference
(Vancouver, CANADA: August 12 - 16, 2013).
- Chair, TORONTO’2013 AES-ATEMA 14th Int. Conference
(Toronto, CANADA: August 05 - 09, 2013).
CANADA: June 03 - 07, 2013).
- Chair: ITALY’2013 AES-ATEMA 12th
Int. Conference (Trieste,
ITALY: April 22 – 26, 2013). In cooperation with University of
Trieste.
Int. Conference (Toronto,
CANADA: July 06 – 10, 2012).
- Chair, CAN’2012 AES-ATEMA 10th Int. Conference (Montreal,
CANADA: June 18 - 22, 2012).
CANADA: August 01 – 05, 2011).
- Chair, CAN’2011 AES-ATEMA 8th Int. Conference (Riga,
LATVIA: July 11 – 15, 2011). In cooperation with Riga Technical
University.
International Conference
(Milan, ITALY: July 04 – 08, 2011) In Cooperation with Politecnico
di Milano, Milan, ITALY.
2010 - Chair, CAN’2011 AES-ATEMA 6th International Conference
(Brixen, ITALY: July 19 -23, 2010). In Cooperation with Politecnico
di Milano, ITALY.
- Chair, CAN’2010 AES-ATEMA 5th International Conference
(Montreal, CANADA: June 27 – July 03, 2010).

-4-
2009 - Chair, CAN’2009 AES–ATEMA 4th International Conference
(Hamburg, GERMANY: September 01 - 04, 2009). In cooperation
with Technical University of Darmstadt, GERMANY.
- Chair, CAN’2009 AES–ATEMA 3rd International Conference
(Montreal, CANADA: July 06 -10, 2009).
2008 - Chair, CAN’2008 AES – ATEMA 2nd International Conference
(Cesena, ITALY: September 01 - 05, 2008). In Cooperation with
University of Bologna, ITALY.
2007 - Chair, CAN’2007 AES – ATEMA 1st
International Conference
(Montreal, CANADA: August 06 - 10, 2007.
2006 - Member of the International Organization Committee: IWSHM –
Annual International Workshop on Structural Health Monitoring,
Stanford University, Stanford, USA.
2006 - 2007 Member of the International Executive Committee: ICASM’ 2007
– International Conference on Structural Analysis of Advanced
Materials, Sept. 2 - 6, 2007, Patras, Greece.
2005 – 2006 Member of the Scientific Committee: 2nd
IC-SCCE Conference
(2nd
International Conference on Scientific Computing and
Computational Engineering), Athens, Greece, July 5 - 8, 2006.
2004 - 2005 Member of the Scientific Committee: 7th
Meso-Mechanics
Conference for Safety and Health, August 1- 4, 2005, Montreal,
Canada.
2004 – Present Member of the Scientific Committee: BIOMDLORE International
Conference on Biomechanics, Biomedical Engineering, Artificial
Organs, Locomotion, Orthopedics, Rehabilitation, Sponsored by
Lithuanian Society of Biomechanics, Palanga, Lithuania.
1997 – Present - Reviewed scientific and technical research articles for possible
publication in well-known international scientific and technical
journals.
- Acted as Member of the Executive Committee as well as Session
Chair in international scientific / engineering conferences.
- Reviewed research project proposals for NSERC (Natural
Sciences and Engineering Research Council of Canada), Québec
Fonds de recherche sur la nature et les technologies, and Science
Foundation Ireland.
- Evaluated applications for promotion and tenure of faculty

-5-
members at national and international universities.
- Acted as chairman and member of examination committees for
the graduate schools of both Ottawa and Carleton Universities.
2006 Visiting research professor at the Center of Excellence of Tokyo
University, Tokyo, Japan.
2000 - 2001 Visiting professorships (during sabbatical) at the following
institutions.
- Helsinki University of Technology, Helsinki, Finland (Sept.-Dec.,
2000 & June 2001)
- Tsukuba University, Tsukuba, Japan (Jan.-April, 2001).
- Université du Maine, Le Mans, France (May 2001).
1982 – present Member of the Faculty of Graduate Studies and Research,
University of Ottawa, Ottawa, CANADA.
f) GRADUATE COURSES TAUGHT
- Continuum Mechanics
- Advanced Topics in Engineering Materials
- Viscoelasticity of Engineering Materials
- Micromechanics of Solids
g) UNDERGRADUATE COURSES TAUGHT
- Engineering Materials
- Advanced Strength of Materials
- Advanced Topics in Engineering Materials
- Applied Mechanics (Statics & Dynamics – in English and French)
- Experimental Mechanics
h) RESEARCH FUNDING
- DFG (GERMANY) Mercator Visiting Professor Fellowship award:
(Administered by TUD - Technical University of Darmstadt, Germany).
Project: Adaptive and intelligent material systems.
- NSERC (CANADA) “Natural Sciences and Engineering Research Council of
CANADA”
Principal Investigator: Y. M. Haddad.
i) PUBLICATIONS (Science & Engineering)
Editor-in-chief: International Scientific/Engineering Research Journals -
Edited Issues 10
Books authored 7 (in 9 volumes)
Books edited 4
Contributions to Handbooks (and Encyclopaedia) 3

-6-
Papers in Refereed Journals 59
Papers in Refereed Conference Proceedings 108
International Scientific/ Engineering Research
Journals Edited (Starting 2007) 11
International Conference Proceedings Edited
(Indexed by Elsevier Science, the Netherlands) –
Starting 2007. 17
Invited Lectures (past 8 years only) 8
International (Science / Engineering) International Research Journals Edited. Copies are
available at the “Legal Deposit, Library and Archives Canada”, and can be ordered
directly from the Editor.
1. Haddad, Y. M. (Editor) – 2016. AES Technical Reviews International Journal, Part C:
International Journal of Advances and Trends in Engineering Materials and their
Applications (IJATEMA), 1 (1) 2016 – ISSN 1916 - 5366.
6. Haddad, Y. M. (Editor) – 2011. AES Technical Reviews International Journal, Part D:
International Journal of Reliability and Safety of Engineering Systems and Structures
(IJRSESS) 1 (1) 2011 – ISSN1916 - 5374
7. Haddad, Y. M. (Editor) – 2010. AES Technical Reviews International Journal, Part B:
Int. J. of Advances in Mechanics and Applications of Industrial Materials (IJAMAIM),
1(1) 2010 – ISSN 1718 -5505.
1(1) 2009 – ISSN 1718 -5505.
9. Haddad, Y. M. (Editor) – 2008. AES Technical Reviews International Journal, Part A:
Int. J. of Nano and Advanced Engineering Materials (IJNAEM), 1 (1) 2008 – ISSN 1916 -
5358.
1(1) 2008 – ISSN 1718 -5505.

-7-
Int. J. of Advances in Mechanics and Applications of Industrial Materials (IJAMAIM), 1
(1) 2007 – ISSN 1718 -5505.
International Conference Proceedings Edited (Indexed by Elsevier Science, the
Netherlands).
[Copies are available at the “Legal Deposit, Library and Archives Canada”, and can be
ordered directly from the Editor]:
2016:
1. Haddad, Y. M. (Editor) – 2016: Proceedings, OTTAWA’2016 AES-ATEMA 30th
International Conference (Ottawa, Canada: October 10 - 14, 2016), ISBN 978-1-927838-
31-0 (CD-ROM) & 978-1-927838-30-3 (Hard Copy). To be published.
2. Haddad, Y. M. (Editor) – 2016: Proceedings, TORONTO’2016 AES-ATEMA 29th
International Conference (Toronto, Canada: July 04 - 08, 2016), ISBN 978-1-927838-29-
7 (CD-ROM) & ISBN 978-1-927838-28-0 (Hard Copy).
3. Haddad, Y. M. (Editor) – 2016: Proceedings, MONTREAL’2016 AES-ATEMA 28th
International Conference (Montreal, Canada: June 20 - 24, 2016), ISBN 978-1-927838-
27-3 (CD-ROM) & 978-1-927838-26-6 (Hard Copy).
4. Haddad, Y. M. (Editor) – 2016: Proceedings, RIO-DE-JANEIRO’2016 AES-ATEMA 27th
International Conference (Rio-de-Janeiro, BRAZIL: May 02 - 06, 2016), ISBN 978-1-
927838-25-9 (CD-ROM) & 978-1-927838-24-2 (Hard Copy.
2015:
5. Haddad, Y. M. (Editor) – 2015: Proceedings, OTTAWA’2015 AES-ATEMA 26th
International Conference (Ottawa, Canada: October 12 - 16, 2015. ISBN 978-1-927838-
21-1 (CD-ROM) & 978-1-927838-20-4 (HARD COPY).
6. Haddad, Y. M. (Editor) – 2016: Proceedings, TORONTO’2015 AES-ATEMA 25th
International Conference (Toronto, Canada: August 10 - 14, 2015), ISBN 978-1-927838-
15-0 (CD-ROM) & 978-1-927838-14-3 (HARD COPY).
7. Haddad, Y. M. (Editor) – 2016: Proceedings, MONTREAL’2015 AES-ATEMA 22th
International Conference (Montreal, Canada: June 15 - 19, 2015), ISBN 978-1-927838-
09-9 (CD-ROM) & 978-1-927838-08-2 (Hard Copy)
2014:
8. Haddad, Y. M. (Editor) – 2014: Proceedings, CAN’2014 Eighteen AES-ATEMA
International Conference (Fairmont Royal York Hotel, Toronto, Canada: August 11 - 15,
2014), ISBN 978-1-927838-04-4(Hard Copy), and ISBN 978-1-927838-05-1(CD-ROM).
9. Haddad, Y. M. (Editor) – 2014: Proceedings, CAN’2014 Seventeen AES-ATEMA
International Conference (McGill University Faculty Club, Montreal, Canada: June 16 -
20, 2014), ISBN 978-1-927838-02-0 (Hard Copy), and ISBN 978-1-927838-03-7(CD-
ROM).

-8-
2013:
10. Haddad, Y. M. (Editor) – 2013: Proceedings of VANCOUVER’2013 AES-ATEMA 15th
International Conference on “Advances and Trends in Engineering Materials and their
Applications” (Vancouver, CANADA: August 12 - 16, 2013). Conference chair: Y. M.
Haddad. ISBN 978-1-927838-01-3 (CD-ROM) & 978-1-927838-00-6 (Hard Copy).
11. Haddad, Y. M. (Editor) – 2013: Proceedings of TORONTO’2013 AES-ATEMA 14th
International Conference on “Advances and Trends in Engineering Materials and their
Applications” (Toronto, CANADA: August 05 - 09, 2013). Conference chair: Y. M.
Haddad. ISBN 978-0-9879945-8-5 (CD-ROM) & 978-0-9879945-9-2 (Hard Copy).
12. Haddad, Y. M. (Editor) – 2013: Proceedings, CAN’2013 Thirteen AES-ATEMA
International Conference (McGill University Faculty Club, Montreal, Canada: June 03 -
07, 2013), pp.116. ISBN 9879945-6-1(Hard Copy), and ISBN 9879945-7-8 (CD-ROM).
13. Haddad, Y. M. (Editor) – 2013: Proceedings, CAN’2013 Twelve AES-ATEMA International
Conference (University of Trieste, Trieste, Italy: April 22 - 26, 2013), pp. 136. In
cooperation with University of Trieste. ISBN 978-0-9879945-5-4 (Hard Copy), and ISBN
978-0-9879945-4-7 (CD-ROM).
2012:
14. Haddad, Y. M. (Editor) – 2012: Proceedings, Eleventh AES-ATEMA (Advances and Trends
in Engineering Materials and their Applications) International Conference (The Fairmont
Royal York Hotel, Toronto, Canada: August 06 – 10, 2012), pp. 393. ISBN 978-0-9879945-
2-3 (Hard Copy), and ISBN 978-0-9879945-1-6 (CD-ROM).
15. Haddad, Y. M. (Editor) – 2012: Proceedings, CAN’2012 Tenth AES-ATEMA International
Conference (McGill University Faculty Club, Montreal, Canada: June 18 - 22, 2012), pp.
230. ISBN 978-0-9879945-0-9 (Hard Copy), and ISBN 978-0-9866504-9-9 (CD-ROM).
2011:
16. Haddad, Y. M. (Editor) – 2011: Proceedings, AES-ATEMA’2011 Ninth International
Conference (McGill University, Montreal, Canada: August 01 – 05, 2011), pp. 426. ISBN
978-0-9866504-7-5 (Hard Copy), and ISBN 978-0-9866504-8-2 (CD-ROM).
17. Haddad, Y. M. (Editor) – 2011: Proceedings, AES-ATEMA’2011 Eighth International
Conference (Riga Technical University, Riga, Latvia: July 11 – 15, 2011) – in cooperation
with Riga Technical University, Riga, Latvia, pp. 166. ISBN 978-0-9866504-5-1(Hard
Copy), and ISBN 978-0-9866504-6-8 (CD-ROM).
18. Haddad, Y. M. (Editor) – 2011: Proceedings, AES-ATEMA’2011 Seventh International
Conference (Politecnico di Milano, Milan, Italy: July 04 – 08, 2011) – in Cooperation with
Politecnico di Milano, Milan, Italy, pp. 226. ISBN 978-0-9866504-3-7(Hard Copy), and
ISBN 978-0-9866504-4-4 (CD-ROM).
2010:
19. Haddad, Y. M. (Editor) – 2010: Proceedings, AES-ATEMA’2010 Sixth International
Conference (Brixen, Italy: July 19 -23, 2010) – in Cooperation with Politecnico di Milano,
Milan, Italy, pp. 166. ISBN 978-0-9866504-0-6 (Hard Copy), and ISBN 978-0-9780479-8-6

-9-
(CD-ROM).
20. Haddad, Y. M. (Editor) – 2009: Proceedings, AES-ATEMA’2010 Fifth International
Conference (McGill University, Montreal, Canada: June 27 – July 03, 2010), pp. 228. ISBN
978-0-9780479-9-3(Hard Copy), and ISBN 978-0-9780479-7-9 (CD-ROM).
2009:
21. Haddad, Y. M. (Editor) – 2009: Proceedings, AES – ATEMA’ 2009 Fourth International
Conference (Hamburg, Germany: September 01 - 04, 2009) – In cooperation with
Technical University of Darmstadt, Germany) – In cooperation with Technical University
of Darmstadt, Germany, pp. 228. ISBN 978-0-9780479-6-2 (Hard Copy), and ISBN 978-
0-9780479-5-5 (CD-ROM).
22. Haddad, Y. M. (Editor) – 2009: Proceedings, AES – ATEMA’ 2009 Third International
Conference (McGill University, Montreal, Canada: July 06 -10, 2009, pp. 321. ISBN
978-0-9780479-4-8 (Hard Copy), and ISBN 978-0-9780479-3-1 (CD-ROM).
2008:
23. Haddad, Y. M. (Editor) – 2008: Proceedings, AES – ATEMA’ 2008 Second International
Conference (University of Bologna, Cesena, Italy: September 01 - 05, 2008) – In
Cooperation with University of Bologna, Italy, pp. 207. ISBN 978-0-9780479-1-7 (Hard
Copy), and ISBN 978-0-9780479-2-4 (CD-ROM).
2007:
24. Haddad, Y. M. (Editor) – 2007: Proceedings, AES – ATEMA’ 2007 First International
Conference (McGill University, Montreal, Canada: August 06 -10, 2007). ), pp. 546.
ISBN 978-0-9780479-0-0 (Hard Copy).
Books Authored ( 9 volumes):
1. Haddad, Y. M. (1995) Viscoelasticity of Engineering Materials, Kluwer Academic
Publishers (Springer), Dordrecht, The Netherlands, pp. 416. Hardbound ISBN 0-412-
59030-1.
2. Haddad, Y. M. (2000) Mechanical Behaviour of Engineering Materials, Volumes I&II,
Kluwer Academic Publishers (Springer), Dordrecht, The Netherlands:
- Hardbound Volume I: Static and Quasi-static Loading, pp. 448. ISBN 0-7923-6354-X.
- Hardbound Volume II: Dynamic Loading and Intelligent Material Systems, 504 pp.,
ISBN 0-7923-6355-8.
Hardbound Set Volumes I and II, ISBN 0-7923-6521-6.
3. Haddad, Y. M. (2005) Advanced Strength of Materials, CD-ROM, TISEC, Inc., Montreal,
Canada.
4. Haddad, Y. M. (2005) Engineering Mechanics, CD-ROM, TISEC, Inc., Montreal,
Canada.
5. Haddad, Y. M. (2010) Mécanique pour les ingénieurs (Statique et Introduction à la
dynamique) pp. 290. ISBN 978-0-9866504-1-3.

-10-
6. Haddad, Y. M. (2011) Engineering Mechanics, pp. 300. ISBN 978-0-9866504-2-0.
7. Haddad, Y. M. (2012) Advanced Strength of Materials, pp. 368. ISBN 978-0-9879945-3-
0.
Books Edited:
1. Haddad, Y. M. (Editor), 2015. 20th Collection of Scientific Research Papers
“Micro- and Nano-Material Systems (I)”, pp. 106.
ISBN 978-1-927838-11-2 (CD-ROM) / 978-1-927838-10-5 (Book) ISSN 1718-
5505.
2. Haddad, Y. M. (Editor), 2015. 21st Collection of Scientific Research Papers
“Micro- and Nano-Material Systems (II)”, pp. 110.
ISBN 978-1-927838-13-6 (CD-ROM) / 978-1-927838-12-9 (Hard Copy) ISSN
1718-5505
3. Haddad, Y. M. (Editor), 2015. 22nd Collection of Scientific Research Papers
“Micro- and Nano-Material Systems (III)”, pp. 100.
ISBN 978-1-927838-17-4 (CD-ROM) / 978-1-927838-16-7 (Hard Copy) ISSN
1915-5409.
4. Haddad, Y. M. (Editor), 1998. Advanced Multilayered and Fibre-Reinforced
Composites, Proceedings of the NATO Advanced Research Workshop on
Multilayered and Fibre-Reinforced Composites: Problems and Prospects, Kiev,
Ukraine, June 2-6, 1997, Kluwer Academic Publishers (Springer), Dordrecht, The
Netherlands: Hardbound, pp. 600. ISBN 0-7923-4911-3 (Hard Copy) .
Chapters in Handbooks and Encyclopaedia:
1. Haddad, Y. M. (2000) Viscoelasticity / Anelasticity, in Encyclopaedia of Materials:
Science and Technology, Elsevier Science, Oxford .
Papers in Refereed (Science/Engineering) International Journals (Since 2003 only):
1. Y. M. Haddad et al. (2014) Numerical and Theoretical Modeling of Natural Convection
of Nanofluids in a Vertical Rectangular Cavity to Investigate the Effects of a Magnetic
Field. AES technical Reviews International Journal – Part C: IJATEMA 1(1)2014.
2. Y. M. Haddad et al. (2014) Numerical and Mathematical Modeling for Energy
Assessment of Buildings. AES technical Reviews International Journal – Part C:
IJATEMA 1(1)2014.
3. Y. M. Haddad et al. (2013) Contribution to the Modeling of Crystallization of Polymers
under Shear. AES technical Reviews International Journal – Part C: IJATEMA 2(1)2013.
4. Y. M. Haddad et al. (2013) Microwave Assisted Laser Melting of Ceramic Materials.
AES technical Reviews International Journal – Part C: IJATEMA 2(1)2013, to be
published.
5. Y. M. Haddad (2013) On the Stochastic Micromechanical Theory of Discrete Material
Systems. AES technical Reviews International Journal – Part C: IJATEMA 1(1)2013, 77
- 87.

-11-
6. Y. M. Haddad (2013) On the Extension of the Stochastic Micromechanical Theory to
Account for the Rheological Behaviour of the Microstructure. AES technical Reviews
International Journal – Part C: IJATEMA 1(1)2013, 89 - 100.
7. Y.M. Haddad et al. (2012) The Effect of Electric Field on the Flow of a Compressible
Ionized Fluid in a Cylindrical Tube. Advanced Studies in Theoretical Physics, 6 (13-16)
687-696.
8. Haddad, Y. M. et al. (2012) The Effect of the Rheological Characteristics of the Molten
Polymer on its Flow in Rigid Cylindrical Tubes,
Advanced Studies in Theoretical Physics, 6 (9-12) 569-586.
9. Y. M. Haddad (2012) On the Stochastic Micromechanical Approach to the Deformation
of Randomly Structured Material Systems. AES technical Reviews International Journal
– Part C: IJATEMA 1(1)2012, 87 - 99.
10. Haddad, Y.M. et al. (2010) Numerical and Theoretical Modeling of Unsteady Flows for
Incompressible Fluid in Rigid Conducts. Application to Molten Polymers Flow.
International Review on Modelling and Simulations 3 (6) 1317-1323.
11. Layla S. Mayboudi and Yehia M. Haddad (2010) Thermal Stress Analysis of
Engineering Materials Exposed to an Intense Heat, AES Technical Reviews International
Journal, Part C: IJAMAIM 1(1)2010, 49 – 60.
12. Feng, J. and Haddad, Y. M. (2010) On the Micromechanics of Viscoelestic Fibre-
composites. AES Technical Reviews International Journal, Part B: IJAMAIM 1 (1) 2010,
81 – 100.
13. Haddad, Y.M. et al.. (2010) Mathematical Modeling of Non- permanent Flows of
Molten Polymers, International Review of Mechanical Engineering, 4 (6) 689-694.
14. Haddad, Y.M. et al. (2009) Numerical Study of Pollutant Propagation Process in
Homogeneous Porous Unsaturated Media, International Review of Mechanical
Engineering, 3 (3) 358-361.
15. Haddad, Y. M. et al. (2009) Two-dimensional Theoretical and Numerical Approach of
Pollutant Transport in the Lowest Layers of the Atmosphere, International Review of
Mechanical Engineering 3 (4) 494-502.
16. Haddad, Y. M. and Becker, W. (2009) On the Stochastic Micromechanics of a Class of
“Adaptive” Composite Systems. AES Technical Reviews International Journal, Part B:
IJAMAIM 1 (1) 2009, 23 – 27.
17. Haddad, Y. M. and Becker, W. (2009) On the Functional Characterization of a Class of
Adaptive Composites with a Time-history Dependent Memory. AES Technical Reviews
International Journal, Part B: IJAMAIM, 1(1)2009. 65 - 75.
18. Haddad, Y. M. et al. (2008) Numerical Simulation of Unsteady Flows of Melt Polymers
in Conical Ducts / Simulation Numérique d’Écoulements Non-permanents des Polymères
Fondus en Conduites Tronconques. Phys. Chem. News 42 (July 2008) 77-83.
19. Haddad, Y. M. et al. (2008). Pulsating Flows in Inelastic Fluids In Anisotropic Porous
Viscoelastic Tubes, International Review of Mechanical Engineering – IREME.
20. Tang, S. H. and Haddad, Y. M. (2007) Shear Deformation Induced Microstructioral
Behavior in FCC Metals, AES Technical Reviews International Journal, Part B:

-12-
IJAMAIM 1 (1) 2007, 87 – 98.
21. Haddad, Y. M. (2007) Towards Determining Nondestructively the Ultimate Strength of
the Material in Quantitative Manner, AES Technical Reviews International Journal, Part
B: IJAMAIM, 1 (1) 2007, 107 -113.
22. Haddad, Y. M. (2006) On the Stochastic Deformation Process in a Randomly Structured
Polycrystalline Solid, Journal of Materials Processing Technology 173, 240 –246.
23. Jacquelin, E. and Haddad, Y. M. (2006) On the Simulation of the Random
Microstructure of a Fibrous Network with Elastic Bonds, J. Mech. Beh. Mater 17(1), 57-
77.
24. Haddad, Y. M. (2006) Functional Characterization of a Class of Intelligent Materials,
IPSI Transactions on Internet Research, 1, 2(1) 53-61.
25. Haddad, Y. M. and P. Yu (2006) A Dynamic System Approach to the Characterization
of a Class of Rheological Materials at Base Temperatures, Thermochimica Acta 442, 10-
13.
26. Haddad, Y. M. (2006) On the Stochastic Deformation Process in a Randomly Structured
Polycrystalline Solid, Journal of Materials Processing Technology 173 (2006) 240-246.
27. Haddad, Y. M. et al. (2005) Résolution Numérique Bi-dimensionelle Des Processus De
Transport-Réaction-Diffusion Dans Un Milieu Poreux Non Saturé, Phys. Chem. News 23
(2005), 19-25.
28. Haddad, Y. M. et al. (2004) A New Lagrangian Model for the Particle Rotation Effects
on Turbulent Dispersion, Revue de Mécanique Appliquée et Théorique, 1(6), 403-416.
29. Haddad, Y. M. and Feng, J. (2003) On the Trade-off between Damping and Stiffness in
the Design of Discontinuous Fibre Reinforced Composites, Composites: Part B, 34, 11-
20.
30. Haddad, Y. M. and Feng, J. (2003) A Micromechanical Model for the Optimization of a
Class of Viscoelastic Short Fiber-Composites, J. Mechanical Behavior of Materials 14
(NOS, 2-3), 87-115.
Papers in Refereed (Science/Engineering) International Conference Proceedings
(Since 2002 only):
1. Y. M. Haddad (2016) On the Non-destructive Determination of the Mechanical
Response States of Engineering Materials in a Quantitative Manner. In Proceedings,
TORONTO’2016 AES-ATEMA 29th
Int. Conference (Toronto, CANADA: July 04 - 08,
2016), pp. 81 – 87.
2. Y. M. Haddad (2016) On the Stochastic Micromechanics of Randomly Structured
Materials. In Proceedings, MONTREAL’2016 AES-ATEMA 28th
Int. Conference
(Montreal, CANADA: June 20 - 24, 2016), pp. 179 – 185.
3. Y. M. Haddad (2016) On the Stochastic Micromechanical Theory of Discrete Material
Systems. In Proceedings, RIO-DE-JANEIRO’2016 AES-ATEMA 27th
Int. Conference
(Rio-de-Janeiro, BRAZIL: May 02 – 04, 2016), pp. 61 – 77.
4. E. Jacquelin and Y. M. Haddad (2015) On the Simulation of the Random
Microstructure of a Fibrous Network with Elastic Bonds. In Proceedings, OTTAWA’2015

-13-
AES-ATEMA 26th
Int. Conference (Ottawa, CANADA: October 12 – 16, 2015), pp. 51 –
70.
5. Y. M. Haddad (2015) On the Optimization of a Class of Adaptive Composite Systems.
A Deterministic Micromechanical Approach. In Proceedings, TORONTO’2015 AES-
ATEMA 25th
Int. Conference (Toronto, CANADA: August 10 – 14, 2015), pp. 101 – 107.
6. Y. M. Haddad and J. Feng (2015) Towards Determining Non-destructively the
Ultimate Strength of the Material in Quantitative Manner. In Proceedings,
TORONTO’2015 AES-ATEMA 25th
Int. Conference (Toronto, CANADA: August 10 – 14,
2015), pp. 109 – 117.
7. Y. M. Haddad (2015) On the Functional Characterization of a Class of “Adaptive“
Viscoelastic Material Systems with the Inclusion of the Microstructure. In Proceedings,
MONTREAL’2015 AES-ATEMA 22nd Int. Conference (Montreal, CANADA: June 15 –
19, 2015), pp. 171 - 180.
8. Y. M. Haddad (2015) On the Stochastic Micromechanics of Randomly Structured
Materials.. In Proceedings, MONTREAL’2015 AES-ATEMA 22nd Int. Conference
(Montreal, CANADA: June 15 – 19, 2015), pp. 181 - 187.
9. Y. M. Haddad et al. (2014) Mathematical and Numerical Simulation of a Biological
Model in Storage Facilities for Argan Waste. In Proceedings, AES-ATEMA International
Conference Series - Advances and Trends in Engineering Materials and their
Applications. In Proceedings, MONTREAL’2014 AES-ATEMA 17th
Int. Conference
(Montreal, CANADA: June 16 – 20, 2014), pp. 57 - 63.
10. Y. M. Haddad et al. (2014) Numerical and Mathematical Modeling for Energy
Assessment of Buildings. In Proceedings, AES-ATEMA International Conference Series -
Advances and Trends in Engineering Materials and their Applications. In Proceedings,
MONTREAL’2017 AES-ATEMA 17th
Int. Conference (Montreal, CANADA: June 16 –
20, 2014), pp. 87- 91.
11. Y. M. Haddad et al. (2014) Numerical and Theoretical Modeling of Natural Convection
of Nanofluids in a Vertical Rectangular Cavity to Investigate the Effects of a Magnetic
Field. In Proceedings, AES-ATEMA International Conference Series - Advances and
Trends in Engineering Materials and their Applications. In Proceedings,
Int. Conference (Montreal, CANADA: June 16 –
20, 2014), pp. 113 - 124.
12. Y. M. Haddad et al. (2014) The Magnetic Field Effect on Thermo-solutal Natural
Convection in Non-Darcy Porous Media with Non-Uniform Porosity Saturated by an
Electrically Conducting Fluid. In Proceedings, AES-ATEMA International Conference
Series - Advances and Trends in Engineering Materials and their Applications. In
Proceedings, MONTREAL’2014 AES-ATEMA 17th
Int. Conference (Montreal, CANADA:
June 16 – 20, 2014), pp. 187 – 198.
13. Y. M. Haddad et al. (2013) Microwave Assisted Laser Melting of Ceramic Materials, In
Proceedings, AES-ATEMA International Conference Series - Advances and Trends in

-14-
Engineering Materials and their Applications, Toronto’2013 AES-ATEMA 14 th
Int.
Conference (Toronto, CANADA: August 05 - 09, 2013), pp. 149 -157.
14. Y. M. Haddad et al. (2013) Contribution to the Modeling of Crystallization of Polymers
under Shear, In Proceedings, AES-ATEMA International Conference Series - Advances
and Trends in Engineering Materials and their Applications. In Proceedings,
Int. Conference (Montreal, CANADA: June 03 – 07,
2013), pp. 61–67.
15. Y. M. Haddad (2013) To Determine Nondestructively the Mechanical Response States
of Classes of Engineering Materials, AES-ATEMA International Conference Series -
Advances and Trends in Engineering Materials and their Applications. In Proceedings,
TRIESTE’2013 AES-ATEMA 12th
Int. Conference (Trieste, ITALY: June 22 – 26, 2013).
16. Haddad, Y.M. (2012) On the Stochastic Micromechanical Approach to the Formulation
of the Response Behaviour of Discrete Material Systems, AES-ATEMA International
Applications, In Proceedings. In Proceedings, TORONTO’2012 AES-ATEMA 11th
Int.
Conference (Toronto, CANADA: August 06 – 10, 2010), pp. 395-409.
17. Haddad, Y.M. (2012) On the Non-destructive Determination of Material Response
States Using Pattern-Recognition and Classification Methodology, AES-ATEMA
International Conference Series - Advances and Trends in Engineering Materials and
their Applications. In Proceedings, MONTREAL’2012 AES-ATEMA 10th
Int. Conference
(Montreal, CANADA: June 18 -22, 2012), pp. 221-224.
18. Haddad, Y.M. (2012) On the Stochastic Micromechanical Theory of Randomly
Structured Materials, AES-ATEMA International Conference Series - Advances and
Trends in Engineering Materials and their Applications. In Proceedings,
Int. Conference (Montreal, CANADA: June 18 -22,
2012), pp. 205-219.
19. Haddad, Y. M. (2011) Intelligent Materials for Engineering Applications: A review. In
Proceedings , AES-ATEMA`2011 Eighth International Conference (Riga, Latvia: July 11
– 15, 2011), pp. 151 -162.
20. Haddad, Y. M. et al. (2011) Non-uniform Porosity Effect on Natural Convection in Non-
darcy Porous Media, AES-ATEMA International Conference Series - Advances and
Trends in Engineering Materials and their Applications. In Proceedings, Eighth
International Conference (Riga, Latvia: July 11 – 15, 2011), pp. 137-142.
21. Axelrad, D. R. and Haddad, Y. M. (2011) On the Behavior of Materials with Binary
Microstructure, AES-ATEMA International Conference Series - Advances and Trends in
Engineering Materials and their Applications. In Proceedings, Ninth International
Conference (Montreal, Canada: August 01 – 05, 2011), pp. 463-471 – Keynote Lecture.
22. Haddad, Y. M. and Feng, J. (2011) On The Micromechanics of a Class of Composite
Structures, AES-ATEMA International Conference Series - Advances and Trends in
Engineering Materials and their Applications. In Proceedings, Eighth International
Conference (Riga, Latvia: July 11 – 15, 2011), pp. 79-90.

-15-
23. Haddad, Y. M. (2011) Towards Determining Non-destructively the Ultimate Strength of
the Material in a Quantitative Manner, AES-ATEMA International Conference Series –
Advances and Trends in Engineering Materials and their Applications. In
Proceedings, Eighth International Conference (Riga, Latvia: July 11 – 15, 2011),
pp. 119-126.
24. Haddad, Y. M. et al. (2011) A New Numerical Code to Study the Flow of Molten
Polymers in Elastic Pipes, AES-ATEMA International Conference Series - Advances and
Trends in Engineering Materials and their Applications. In Proceedings, Eighth
International Conference (Riga, Latvia: July 11 – 15, 2011). pp. 143-148.
25. Haddad, Y. M. (2011) On the Stochastic Micromechanical Approach to the Deformation
of Randomly Structured Material Systems, AES-ATEMA International Conference
Series - Advances and Trends in Engineering Materials and their Applications, pp. 87-
99.
26. Haddad, Y. M. (2011) On the Stochastic Micromechanical Approach to the Deformation
of Randomly Structured Material Systems. In Proceedings, AES-ATEMA` 2011 Seventh
International Conference (Milan, Italy: July 04 – 08, 2011), pp. 205 -217 - Keynote
Lecture.
27. Haddad, Y. M. (2010) On the Functional Characterization of Structured Material
Systems, AES-ATEMA International Conference Series - Advances and Trends in
Engineering Materials and their Applications. In Proceedings, Sixth International
Conference (Brixen, Italy: July 19 -23, 2010), pp. 113-123.
28. Haddad, Y. M. (2010) On the Functional Characterization of Structured Material
Systems Part II: Stochastic Micromechanical Approach, AES-ATEMA International
Applications. In Proceedings, Fifth International Conference (Le Quebec, Canada: June
27 – July 03, 2010), pp. 185-190.
29. Haddad, Y. M. and Feng, J. (2010) On the Functional Characterization of Structured
Material Systems Part I: A Deterministic Micromechanical Approach, AES-ATEMA
their Applications. In Proceedings, Fifth International Conference (Le Quebec, Canada:
June 27 – July 03, 2010), pp. 165-183.
30. Haddad, Y. M. et al. (2009) Simulation numérique bidimensionnelle du transport du
polluant en milieu poreux, AES-ATEMA International Conference Series - Advances and
Trends in Engineering Materials and their Applications. In Proceedings,Third
International Conference (Montreal, Canada: July 06 – 10, 2009), pp. 185-191.
31. Haddad, Y. M. and Becker, W. (2009) On the Stochastic Micromechanics of Class of
"Adaptive" Composite Systems, AES-ATEMA International Conference Series -
Advances and Trends in Engineering Materials and their Applications, In Proceedings,
Third International Conference (Montreal, Canada: July 06 – 10, 2009), pp. 261-266.
32. Haddad, Y. M. and Becker, W. (2009) On the Functional Characterization of Class of
Adaptive Composites with Time-history Dependent Memory, AES-ATEMA

-16-
their Applications. In Proceedings, Fourth International Conference (Hamburg,
Germany: September 01 – 04, 2009), pp. 147-157. Keynote Paper.
the Material in Quantitative Manner, AES-ATEMA International Conference Series -
Advances and Trends in Engineering Materials and their Applications. In
Proceedings, Fourth International Conference (Hamburg, Germany: September 01 – 04,
2009), pp. 181-187.
34. Mayboudi, L.S., Haddad, Y. M. (2009) Advanced Material Systems Exposed to an
Intense Heat Source - Part I: Literature Review, AES-ATEMA International Conference
Series - Advances and Trends in Engineering Materials and their Applications. In
Proceedings, Third international Conference (Montreal, Canada: July 06 -10, 2009),
pp. 193-200.
35. Mayboudi, L.S., Haddad, Y. M. (2009) Advanced Material Systems Exposed to an
Intense Heat Source - Part II: Thermal Stress analysis, AES-ATEMA International
Applications. In Proceedings, Third international Conference (Montreal, Canada: July
06 -10, 2009), pp. 201 - 208.
36. Haddad, Y. M. and W. Becker (2008) On the Stochastic Micromechanics of a Class of
“Adaptive” Composite Systems, In Proceedings, Second AES-ATEMA’ 2008
International Conference on Advances and Trends of Engineering Materials and their
Applications. In Proceedings, Second International Conference (Cesena, Italy:
September 01 – 04, 2008), pp. 77 – 81. Keynote Paper.
37. Haddad, Y. M. (2007) Nouvelle approche paramétrique de calcul de la couche limite
laminaire instationnaire autour des corps déformables en mouvement non uniforme, AES-
ATEMA International Conference Series - Advances and Trends in Engineering
Materials and their Applications. In Proceedings, First International Conference
(Montreal, Canada : August 06 -10, 2007), pp. 505-514.
38. Tang, S.H. and Haddad, Y. M. (2007) Shear Deformation-induced Microstructural
Behavior in FCC Metals, AES-ATEMA International Conference Series - Advances and
Trends in Engineering Materials and their Applications. In Proceedings, First
International Conference (Montreal, Canada : August 06 -10, 2007), pp. 417-428.
39. Haddad, Y. M. (2007) Nouvelle approche paramétrique de calcul de la couche limite
laminaire instationnaire autour des corps déformables en mouvement non-uniforme, In
Proceedings, First AES-ATEMA’ 2007 International Conference on Advances and
Trends of Engineering Materials and their Application (Montreal, Canada: August 06 -
10, 2007), pp. 505 – 514.
40. Haddad, Y. M. (2007) On the Numerical Modelling of Natural Convection Flow. In
Proceedings, Eurotherm Seminar No. 81: Reactive Heat Transfer in Porous Media,
Ecole des Mines d’Albi, France, June 4 -6, 2007.
41. Haddad, Y. M. (2006) On the Stochastic Micromechanics of a Class of “Adaptive”
Composite Systems, In Proceedings, The 12th Int. Symposium on Plasticity & its Current
Applications, July 17 - 22, 2006, Halifax, NS, Canada (CD – ROM). Keynote paper.

-17-
42. Haddad, Y. M. (2006) An Expert-Pattern Recognition System for the Identification of
Mechanical Response States of Engineering Materials and Structures, In Proceedings, 2nd
IC-SCCE – 2nd
Int. Conf. “From Scientific Computing to Computational Engineering”,
Athens, Greece, 6 - 8 July, 2006 (CD – ROM).
43. Haddad, Y. M. (2006) A. Knowledge-based System for the Identification of Material
Response States, In Proceedings (CD – ROM), ASM 2006 - The 15th
IASTED
International Conference on Applied Simulation and Modeling, June 26-28, 2006,
Rhodes, Greece, pp. 402-405.
44. Haddad, Y. M. (2006) On the Non-destructive Determination of Material Response
States Using Pattern Recognition and Classification Methodology, In Proceedings, OPE’
06 – CHENNAI, International Conference & Exhibition on Pressure Vessels and Piping,
Chennai, India, February 7-9, 2006.
45. Haddad, Y. M. (2006) On the Dynamic Response of a Class of “Adaptive” Viscoelastic
Composites with the Inclusion of the Microstructure, In Proceedings, PACAM IX – Ninth
Pan American Congress of Applied Mechanics, Mérida, México, January 2-6, 2006.
46. Haddad, Y. M. (2005) On the Functional Characterization of Intelligent Materials, In
Proceedings, IPSI’ 2005 (Internet, Processing, Systems, and Interdisciplinary Research),
Sveti Stefan, Sept. 24-Oct. 01, 2005, CD-ROM.
47. Haddad, Y. M. and Feng, J. (2005) On the Performance-based Design of a Class of
"Adaptive" Fiber-composites for Applications in Building Structures, Improvement of
Buildings' Structural Quality by New Technologies. In Proceedings, Final Conference of
COST Action C12, pp. 201-206.
48. Haddad, Y. M. (2005) On the Functional Characterization of Intelligent Materials. In
Proceedings, IPSI’ 2005 (Internet, Processing, Systems, and Interdisciplinary Research),
Sveti Stefan, Sept. 24-Oct. 01, 2005, CD-ROM.
the Material in a Quantitative Manner. In Proceedings, 5th
International Workshop on
Structural Health Monitoring, Stanford University, Stanford, CA, Sept. 12-14, 2005,
DEStech Publications Inc., Lancaster, PA.
50. Haddad, Y. M. (2005) On the Functional Characterization of a Class of “Adaptive”
Viscoelastic Material Systems with the Inclusion of the Microstructure. In Proceedings,
7th
Int. Conf. on Mesomechanics 2005: Mesoscopic and Multiscale Consideration in
Modern Science and Engineering, Montreal, Canada, August 1-4, 2005, pp. 389-95.
51. Haddad, Y. M. (2005) On the Optimization of a Class of Adaptive Composite Systems:
A Multidisciplinary Approach. In Proceedings, IPSI’ 2005 (Internet, Processing,
Systems, and Interdisciplinary Research), Spain: La Gavina, April 28-May 01, 2005, CD-
ROM.
52. Haddad, Y. M. (2005) An Intelligent Non-destructive Inspection System for the
Quantitative Determination of Material Response States: A Multidisciplinary Approach.
In Proceedings, IPSI’ 2005 (Internet, Processing, Systems, and Interdisciplinary
Research), France: Carcassonne, April 22-26, 2005, CD-ROM.
53. Haddad, Y. M. and P. Yu (2004) A Dynamic System Approach to the Characterization

-18-
of a Class of Rheological Materials at Base-Temperatures. In Proceedings, North
American Thermal Analysis Society NATAS 2004 Conference, Williamsburg, Virginia,
USA, October 4-6, 2004, Paper #13-733.
54. Haddad, Y. M. (2004) A Knowledge-Based Intelligent Non-destructive Inspection
System for the Determination of Material Response States. In Proceedings, RRRTEA’
04, International Conference of Restoration, Recycling and Rejuvenation Technology for
Engineering and Architecture Application, Cesena, Italy, June 7-11, 2004, pp. 213-219.
55. Haddad, Y. M. and Feng, J. (2004) On the Optimization of a Class of Adaptive
Composite Systems: A Deterministic Micromechanical Approach. In Proceedings,
International Conference of Multiscaling in Applied Science and Emerging Technology:
Fundamentals and Applications in Mesomechanics, Patras, Greece, May 31-June 4, 2004,
pp. 470-477.
56. Haddad, Y. M. (2004) On the Stochastic Micromechanics of a Class of “Adaptive”
composites with a Time-history Dependent Memory. In Proceedings, Int. Conf. of
Influence of Traditional Mathematics and Mechanics on Modern Science and
Technology, Messini, Greece, May 24-28, 2004, pp.155-62.
57. Haddad, Y. M. and Feng, J. (2004) On the Development of a Class of “Adaptive” Fibre
Composites: 1. A Trade-off between Damping and Stiffness by Optimization. In
Proceedings, CIRP 2004 Design Seminar “Design in the Global Village”, Cairo, Egypt,
May 16-18, 2004.
58. Haddad, Y. M. and Feng, J. (2004) On the Trade-off between Damping and Stiffness for
a Class of Fibre-Composites. In Proceedings, PACAM VIII-Eighth Pan American
Congress of Applied Mechanics, Havana, Cuba, Jan. 05-09, 2004, Vol. 10, pp. 17-20.
59. Haddad, Y. M. (2003) On the Non-destructive Determination of the Mechanical
Response State in Biomaterials: A Pattern Recognition and Classification Approach. In
Proceedings of the IASTED International Conference on Biomechanics, pp. 273-278.
60. Haddad, Y. M. (2003) On the Nondestructive Identification of the Mechanical Response
of Engineering Materials: A Pattern Recognition and Classification Approach. In
Proceedings, 4th International Workshop on Structural Health Monitoring, Stanford
University, Stanford, CA, Sept. 15-17, 2003, DEStech Publications Inc., Lancaster, PA.
61. Haddad, Y. M. (2003) On the Stochastic Micromechanics of a Class of Randomly
Structured Material with a Time-history dependent Response. In Proceedings, APM 2003
- XXXI International Summer School’ Conference “Advanced Problems in Mechanics”,
Institute of Problems of Mechanical Engineering of Russian Academy of Sciences, St.
Petersburg, Russia, June 22 - July 2, 2003.
62. Haddad, Y. M. and Molina, G. (2003) On the Nondestructive Quantification of the
Mechanical response State in a Composite Material Using a Pattern-recognition /
Classification Methodology. In Proceedings, ICCE/10 - Tenth Int. Conference on
Composite/Nano Engineering, New Orleans, La, July 20-26, 2003.
63. Feng, J. and Haddad, Y M. (2003) On the Optimization of a Class of Laminated Short
Fiber-Composites: A Trade-off between Damping and Stiffness. In Proceedings, CASI-

-19-
16th Aerospace Structures and Materials Symposium: Canadian Aeronautics and Space
Institute 50th AGM Conferenced, Montreal, Canada, April 28-30, 2003, CD-ROM.
64. Haddad, Y. M. et al. (2003) Modèle numérique bidimensionnelle des processus de
transport dans un milieu poreux non saturé. In Proceedings, 6ème Congres de
Mécanique, 15-18 avril 2003, Tanger, Maroc.
65. Gueraoui, K., Haddad, Y. M. et al. (2003) Nouvelle relation contrainte pariétale-débit
pour un écoulement de fluides non newtoniens en conduite déformable. In Proceedings,
6ème Congress de Mécanique, 15-18 avril 2003, Tanger, Maroc.
66. Haddad, Y. M. (2002) On the Stochastic Deformation Process in Class of Randomly
Structured Materials. In Proceedings, Int. Symposium of Multiscaling in Mechanics, Sept.
2-6, 2002, Messini, Greece.
67. Haddad, Y. M. and Molina, G. J. (2002) On the Characterization of Material Repeated-
Impact States Using a Pattern-Recognition Approach. In Proceedings, 14th
USNCTAM-
U.S. National Congress on Theoretical and Applied Mechanics, Blacksburg, VA, U. S.
A., June 23-28, 2002.
66. Haddad, Y. M. (2002) On the Thermoviscoelasticity of Engineering Materials. In
Proceedings, Plasticity’2002- 9th Int. Symposium, Aruba, Jan. 3-9, 2002, pp. 186-188.
Other (Science/Engineering) International Conference Presentations (Since 2003 only):
1. K. Gueraoui, Haddad, Y. M. et al. (2007) Numerical Modelling of Natural Convection
Flow in A Vertical Cylinder Enclosure Filled with Micropolar Fluids, Eurotherm 81 –
Albi, France, Reactive Heat Transfer in Porous Media, June 4 - 6, 2007.
2. Haddad, Y. M. (2004) On the Design of Pattern-recognition Classifiers for the
Prediction of a System Response States, with Applications in Engineering and the
Sciences, In Proceedings, EISTA’ 2004 (Int. Conference on Education and Information
Systems: Technologies and Applications), Orlando, Florida, July 21-25, 2004. Paper
#E543TH/E8274.
3. Haddad, Y. M. (2003) On the Stochastic Thermo-micromechanics of a Class of Material
with a Time-history Dependent Response, In Proceedings, Thermodynamics 2003:
Thermodynamics and Statistical Mechanics with Industrial Applications, University of
Cambridge, U. K., April 9-11, 2003, p. 43.
4. Haddad, Y. M. (2003) A Pattern Recognition and Classification Approach for the
Nondestructive Determination of Material Response Rates, In Proceedings, 5th
EUROMECH Solid Mechanics Conference, 17-22 August 2003: Thessaloniki, Greece.
INVITED LECTURES (Since 2006 only):
1. Haddad, Y. M., 2009. On the Optimization of Short Fibre Composites: A Trade-off
between Damping and Stiffness, Faculty of Engineering, Technical University of
Darmstadt, Darmstadt, Germany, June 2007.
2. Haddad, Y. M., 2008. On the Micromechanical Characterization of Structured Material
Systems, Seminar Series, Faculty of Engineering, Technical University of Darmstadt,
Darmstadt, Germany, May 01 – September 01, 2007.

-20-
3. Haddad, Y. M., 2006. On the Functional Characterization of a Class of Engineering
Materials with Adaptive Microstructure, Faculty of Engineering, Kobe University, Kobe,
Japan, October 27, 2006.
4. Haddad, Y. M., 2006. Towards Determination of the Ultimate Strength of Engineering
Materials in a Non-destructive Manner, Japan National Institute for Materials Science,
Tsukuba, Japan, October 23, 2006.
5. Haddad, Y. M., 2006. On the Non-destructive Determination of the Mechanical
Response of Materials in a Quantitative Manner: A Pattern Recognition and
Classification Approach, University of Tokyo, Tokyo, Japan, October 18, 2006.
6. Haddad, Y. M., 2006. On Quantitative Non-destructive Testing, Japan Central Research
Institute of Electric Power Industry, Tokyo, Japan, October 15, 2006.
7. Haddad, Y. M., 2006. On the Advances and Trends in Engineering Materials and their
Applications, Centre of Excellence, COE’ Century 21 Program, Faculty of Engineering,
University of Tokyo, Tokyo, Japan, October 04, 2006.
8. Haddad, Y. M., 2006. Reliability in Engineering Design, Dept. of Mechanical
Engineering, University of Tokyo, Tokyo, Japan, October 03, 2006.
OTHER ADVANCED WORKSHOPS AND SEMINARS (Starting 2006):
1. Haddad, Y. M. (2009) On the Internal Fracture Process in Materials. Faculty of
Mechanical Engineering, Technical University of Darmstadt, Darmstadt, Germany, July
2009.
2. Haddad, Y. M. (2007) On the Micromechanical Characterization o f Structured Material
Systems, Seminar Series, Faculty of Engineering, Technical University of Darmstadt,
Darmstadt, Germany, May 01 - September 1, 2007.
3. Haddad, Y. M. (2006) On the Advances and Trends in Engineering Materials and their
Applications, Centre of Excellence, COE' Century 21 Program, Faculty of Engineering,
University of Tokyo, Tokyo, Japan, October 04, 2006.
4. Haddad, Y. M. (2006) Reliability in Engineering Design, Dept. of Mechanical
Engineering, University of Tokyo, Tokyo, Japan, October 03, 2006.
RESEARCH CO-OPERATION (Since 2001 only):
1. 2007 - : “Functional Characterization of Engineering Materials with Adaptive
Microstructure”, with Prof. W. Becker, Dept. of Mechanical Engineering, University of
Darmstadt, Darmstadt, Germany.
2. 2006: “Micromechanics of Solids and Adaptive Material Systems”, with Prof. S. Sakai,
Centre of Excellence, Tokyo University, Tokyo, Japan.
3. 2004: “On the Simulation of the Mechanical Response of Engineering Materials and
Structures” with Prof. E. Jacquelin, Université Claude Bernard Lyon I, France.
4. 2001 - 2002: “Mechanical Performance of Lightweight Structures and Materials” with
Prof. O. Saarella, Head of Laboratory of Ligh weight Structures, Aeronautical
Engineering, Helsinki University of Technology, Helsinki, Finland.
5. 2001: “Acoustic Materials”, with Professor S. Sahraoui, Laboratoire d’Acoustique de

-21-
l’Université du Maine, Le Mans, France.

CV of Professor Dr. Yehia Haddad

Recommended

Recommended

More Related Content

Similar to CV of Professor Dr. Yehia Haddad

Similar to CV of Professor Dr. Yehia Haddad (20)

CV of Professor Dr. Yehia Haddad