VRS Technologies always leading the company to provide CCTV Camera Installation Setup as per the Customer requirement in Dubai. we have a skilled team to set up CCTV Camera at an affordable cost. Call us at +971555182748. Visit us https://www.vrscomputers.com/services/cctv-camera-installation-dubai

1. Process of CCTV Camera
Installation Setup
From
www.vrscomputers.com

2. CCTV Camera Installation
• The CCTV camera Installation setup has been the most
critical entity for companies and residences in order to
monitoring the untoward and illicit activities which
keeps happening around.
• In this process, the CCTV cabling and its subsequent
alignment have made it possible for a good
surveillance system possible as these CCTV Camera
have proven to be an instrumental tool to determine
the productivity and efficiency of the business as well.

3. Choose a High, Broad angle for
your CCTV Camera
The best angle of any room is usually looking down from
the corner where the ceiling meets the walls. Make sure
you can clearly see all entries and exits and that the
camera is near a power outlet.
• If you are mounting a camera outside, place it above
10ft so that it cannot be easily knocked down.

4. Mount your CCTV Camera to the
wall
Some cameras come with sticky pads to adhere your camera
to the wall, but screwing your camera in is the safest way to
mount your cameras long-term. While every camera is
different, most of them can be mounted the same way:
• Place the mount in its desired location.
• Using a sharpie, make marks on the wall where each
screw should go.
• Drill a hole for each screw using an electric drill
• Hammer in any molding pins.
• Screw the mount into the wall.
• Position the camera to your desired angle.

5. Attach your CCTV Camera to a
Power Source
Almost all cameras come with a power adapter that plugs
into a normal wall socket. Plug the small, round end into
the power input on the back of the camera and plug the
other end into the outlet.
• If your power adapter is missing or broken, contact
your manufacturer.

6. Attach a Wired CCTV Camera to
your DVR
Wireless cameras will come with a software disc that you
need to install to view your feeds. Follow the on-screen
instructions to access your cameras.
• Some cameras have a small receiver that attaches to your
computer through a USB port. Make sure this is properly
attached.
• Write down your camera's IP address (ex. 192.168.0.5) if
provided -- this number can be typed into any web
browser to view your camera remotely.

7. Attach the Monitor to the DVR
This connection frequently uses a BNC cable as well, but
some DVR's can attach with HDMI cables or coaxial cables.
Using your preferred connection, attach one end to the
DVR's "Output" port and the other to the monitor's
"Input."
• You can hook up as many cameras as your DVR has
inputs -- it will automatically record every camera you
install.
• Note which input you plug into-- this is the input you
need to choose to see your cameras.

8. Troubleshoot any Connection
Issues
• Check that the camera, DVR, and monitor are all hooked
up to a power supply and turned on.
• Make sure your cables are securely attached and that
you have selected the right inputs for your DVR and
monitor.
• Some monitors will display every camera at the same
time, others have "input" buttons that allow you to
switch between cameras.

9. Conclusion
Looking for Setup CCTV Camera Installation in your house,
business area, etc., Contact VRS Technologies in Dubai, UAE.
Contact US:
VRS Technologies LLC
Call: +971-55-5182748
Visit: www.vrscomputers.com