DigiFact IP Deck 2022.pptx

LOUROE ELECTRONICS® | 6955 VALJEAN AVE. VAN NUYS CA 91406 | PH: 818-994-6498 | FAX: 818-994-6458 WWW.LOUROE.COM
DigiFact IP Network
Speaker Microphone Series
®

60+
Depolyed in over
60 countries
worldwide
900k+
VeriFact Microphones
In Use
1979
Louroe established Designed &
Developed In USA
From The Leader In Audio Monitoring
Technology For Over 40 Years

Trusted By Government Agencies & Renowned Brands

Analog or Digital: What’s Right for Your Deployment?
 When it comes to security technologies, there is often the common misconception that digital is always
better than analog, but each has its own merits depending on the deployment’s needs.
 Analog devices, like the VeriFact Series which can connect directly to a camera, are often seen as more
traditional and cost-effective.
 IP Network microphones, like the DigiFact Series, are newer to the marketplace and show great
potential in a network setting across a variety of use cases and deployments.
DigiFact 830 (LE-830)
VeriFact A-ML (LE-770)

When to Use Analog:
 When the audio devices will be added as an attachment to a security solution such as connecting to a
Louroe base station, camera, recorder or operating as part of an IP video solution.
 For ease of use when it comes to installation and compatibility with most other hardware devices, like
cameras and recorders (Plug & Play).
 Analog is an effective solution when deploying standalone audio monitoring solutions or mic + base
station systems with one-way and two-way talkdown features.
VeriFact A
VeriFact 550
AP -1TB

When to Use Digital:
 Designed to be operate independently of a video system or as part of a
security larger solution.
 With structured cable connections, projects require less cabling, saving
integrators on installation times
 DigiFact microphones allow integrators to have more control over the
system’s sensitivity, interface and can be operated with audio analytics
software, like decibel-level threshold alarming.
 If set decibel levels are exceeded, the microphone’s threshold alarming can
trigger an event as well as trigger relay to other security equipment.
 When seeking the ability for customization and to operate value and add
threat detection analytics software.

DigiFact IP Network Speaker Microphone Series: Highlights
 Operates with the Louroe Microphone Application Platform
(LMAP), a common operating system across all DigiFact products
allows for: Ease of use installation and maintenance; an open
API for support applications and firmware updates.
 ONVIF Profile “T” compatible IP Speaker Microphones that
offering the value of networked audio monitoring technologies
which processes and streams bi-directional audio. [RTSP]
 Threat detection audio analytics included with all LMAP devices
at no additional charge and no annual maintenance fee.
 DigiFact speaker microphones are available in a variety of sizes,
applicable to a wide-range of deployment scenarios.

DigiFact IP Network Speaker Microphones
Series: Product Overview
New Features!
 Structured cable connection
 PoE connectivity (IEEE 802.3af compliant)
 Alarm reporting via relay outputs and POST messages
 Sound decibel level threshold alarming
 Open API for ease of integration
 ONVIF Profile ”T” compatible
 Manufacturer patented + proprietary software
Key Applications:
 Stand alone network two-way audio communication devices.
 Compatible with leading ONVIF-compliant NVR’s, VMS and
other monitoring solutions.

 Featuring a robust quad-core microprocessor selected to deliver judicial sound quality audio, DigiFact
devices are capable of running a variety of analytic applications which can be deployed to detect threats
and report events.
Product Highlight: Audio Analytics For Threat Detection
Louroe Electronic’s Audio
Analytics software is
included with all
DigiFact devices at no
additional charge and
with no annual
maintenance fee.

DigiFact Family of Devices Integration to Third Party Software Platforms
* Note: Louroe Electronics continues to expand the list of compatible software packages as available, if a software package is not listed, please contact Louroe Electronics at 1-818-994-6498 for additional details.
The DigiFact family of devices are designed to be OnVif Profile T compliant and as such are compatible with
most video management systems (VMS) packages that are also OnVif profile T compliant. Louroe Electronics
has tested interoperability of the DigiFact family of devices with the following third-party software packages.

DigiFact A: New Design & Improved Capabilities
 The DigiFact A (LE-870) is a one-way ceiling mounted IP Network microphone. It offers the value of
networked audio monitoring and designed to provide one-way, omni-directional audio monitoring,
within a 30’ diameter circle.
 Integrating the Louroe Microphone Application Platform (LMAP), this wide dynamic range audio device
delivers the broad frequency response that users seek, capable of sensitivity in picking up low-and-high
frequency audibles.
Features:
 Auxiliary microphone input & speaker output ports
 Manufacturer proprietary software
 Compatible with leading ONVIF-compliant NVR’s, VMS and other
monitoring solutions

DigiFact E Outdoor: Water & Vandal Resistant Analytics
 The Louroe DigiFact E (LE-875) is an ONVIF Profile “T” compatible, outdoor wall mounted IP Network
microphone designed to provide one-way audio monitoring with an omni-directional microphone.
 The unit, housed in a vandal and NEMA water resistant enclosure, harnesses the value of networked
audio monitoring technology which analyzes and streams bi-directional audio.

ONVIF Profile “T” compatible, two-way ceiling mounted 4.0”, 5.5” and 6.5” IP Network speaker microphones that
harness the value of networked audio monitoring technologies which analyze and stream bi-directional audio.
DigiFact 830 / 825 / 851 / 855
Ceiling-Mounted IP Network Speaker Microphones

DigiFact 830/825 IP Network Speaker Microphones
These wide dynamic range audio devices deliver a broad frequency response capable of picking up low-and-high
frequency sounds and are applicable to a wide-range of deployment scenarios.
New Features!
 Includes firedome for reverb audio management
Key Applications:
 Stand alone network two-way audio communication devices.
other monitoring solutions.

DigiFact 880 Push Button Wall Mounted IP Network
Speaker Microphone
Highlights:
 This wide dynamic range audio device delivers a broad frequency
response capable of picking up low-and-high frequency sounds and
is designed to fit into 3-gang back box enclosures
 Integrates a lighted, vandal resistant call button with a normally open
momentary “dry” contact output that can be connected to an
alarm input, doorbell circuit, etc
Key Applications:
 Stand alone network two-way audio communication devices
other monitoring solutions
 Capable of running an analytical application which detects and
processes sounds of a threat

DigiFact 880: Push Button Wall Mounted
IP Network Speaker Microphone
New Features!
 ONVIF Profile “T” compatible
Additional Features:
 Brushed stainless steel finish
 Designed to fit into commercial/industrial 3-gang back box
 Omni-directional pick up pattern of 15" feet
 Outdoor/Indoor IP66 weather resistant
®
* Note: Back box not provided

DigiFact 890: Hands-Free Wall Mounted IP Network
Speaker Microphone
ONVIF Profile “T” compatible, wall-mounted hands-free two-way IP network speaker microphone that
designed to fit into commercial/industrial 3-gang back box with a depth of 4” or greater.
* Note: Back box not provided
Key Applications:
 Stand alone IP network two-way audio communication devices
 Compatible with leading ONVIF-compliant NVR’s, VMS and more
 Capable of running a variety of analytical applications which can be
added to detect, and report sounds of a threatening behavior
Additional Features:
 Brushed stainless steel finish
 Hands free two-way communication
 Omni-directional pick-up pattern within a 30' diameter circle

Healthcare
Education
Hospitality
Retail
Key Placement Opportunities

Law Enforcement
Commercial
Public Safety
Banking
Key Vertical Placement Opportunities

FAQ
Q. Understanding that the IP mics with software are not plug and play devices, is there a minimum project quantity that Louroe would
recommend for this series of equipment?
A: No, it is project specific, dependent on design and locational value.
Q. Are the products Made in the USA ?
A. Louroe Researches, Designs, Develops, Assembles & Commercializes in the USA. Letters certifying credentials for U.S.G.
content requirements can be issued to qualified entities. These include C/U.L./Nom Registered.
Q. Will product support materials be available? When ? What ?
A. Marketing support materials are available. Louroe’s website training includes these featured products. Please contact Louroe’s
Field Application Engineer to arrange your training block of time.
Q. What is the UL Status of this product line?
A. Pending
Q. Has pricing been established
A. Yes
For selected distribution,
contact Mfg. Representative.

Louroe Support Contact
Product Application Support & Design:
John O’Dell, Eastern Field Application Engineer:
John@louroe.com / (216) 470-0726
Erin Turner, Western Field Application Engineer:
ErinT@louroe.com / (818) 934-7562
Questions on sales, products, or data:
Sales@louroe.com / (888) 266-0554
Technical Questions/ Support:
techsupport@louroe.com
Order Placement / Shipping Information:
Orderdesk@louroe.com

DigiFact IP Deck 2022.pptx

More Related Content

Recently uploaded

Featured

DigiFact IP Deck 2022.pptx

Editor's Notes