EVANNEX EcoHitch for Tesla Model S Install Guide Final
Mario Kart
1. Mario Kart Assembly Instruction’s Manual
Mario Kart Created and Designed by:
Ryan Mueller
Omar Alzaabi,
Dipen Desai
Michael Meltzer
Michael Blanchard
Instruction Manual Created by:
Ryan Mueller
Michael Meltzer
Omar Alzaabi
4. Step 1: Place the rotating wheel mount in the wheel assembly block
5. Step 2: Attach the wheel assembly arm to the rotating wheel mount,
and secure it with the assembly pin
Step 3: Repeat the steps in this sub assembly until you have 2
rotating wheel mount assemblies
8. Step 2: Place the spring on top of the axle
Step 3: Repeat this step until you have 2 rear tire mounts
9. Mario Kart Complete Assembly
Step 1: Place the Mario Symbol, front filter, and screws on the front
of the frame
10. Step 2: Slide the smaller wheels and the breaks onto the rotating
wheel mount sub-assemblies, and then place the sub-assemblies on
the frame
11. Step 3: Attach the large and small steering pins to the bar connector
12. Step 4: Slide the steering wheel through the hole on the frame and
connect it to the bar connector on the bottom. Then proceed to place
the bolts in the filter
13. Step 5: Bolt the side wing to the side panel mount for the right side
14. Step 6: Bolt the side wing to the side panel mount for the left side
15. Step 7: Attach the left and right exhaust ports to the engine
16. Step 8: Connect the side panel mounts and the engine to the frame
17. Step 9: Place the pedals within the frame, and then attach the seat to
the frame
18. Step 10: Attach the roll-bar to the side of the frame and attach the
bumper to the end of the roll-bar
19. Step 11: Slide the larger wheels on the rear tire mounts sub
assembly, and proceed to attach the rear tire sub assembly onto the
roll-bar