1. LA-UR-16-23388
Approved for public release; distribution is unlimited.
Title: Personal Drawing Portfolio Sample
Author(s): Leon, Ryan Francis
Intended for: For personal use in applying to jobs
Issued: 2016-05-12

2. Disclaimer:
Los Alamos National Laboratory, an affirmative action/equal opportunity employer, is operated by the Los Alamos National Security, LLC for
the National Nuclear Security Administration of the U.S. Department of Energy under contract DE-AC52-06NA25396. By approving this
article, the publisher recognizes that the U.S. Government retains nonexclusive, royalty-free license to publish or reproduce the published
form of this contribution, or to allow others to do so, for U.S. Government purposes. Los Alamos National Laboratory requests that the
publisher identify this article as work performed under the auspices of the U.S. Department of Energy. Los Alamos National Laboratory
strongly supports academic freedom and a researcher's right to publish; as an institution, however, the Laboratory does not endorse the
viewpoint of a publication or guarantee its technical correctness.

3. 3/4-10 Machine Threads
1.25
2.88
.45
.25.63
1.38
2.00
7/8 Smooth Finish &
Highly Polished
.88
R.09
R.13
.75
.63
.45
.38
Heat Treat: 3 hrs. @ 975 degrees
in vacuum or inert gas
& air cool
SOLIDWORKS Connector.SLDDRW Connector.SLDPRT
A
B
C
D
8 7 6 5 4 3 2 1
Printed on Monday, May 09, 2016 10:55:48 AM
SCALE: NONE
DO NOT SCALE DRAWING
SIZE
B
CAGE CODE
88516
REV
SHEET 1 OF 1
DRAWING NUMBER
TS3-1974-G-6
BALL JOINT SET
MST-16
AUTHOR
3D DRAFTER
CHECKED BY
APPROVED BY
T. BROOKS
RYAN LEON
ADAM FARROW
MANUEL LOVATO
MET-1
MST-16
MET-2
MST-8
INITIAL RELEASE APPROVALS MM/DD/YY
DRAWING LEVEL: PRODUCT
NEXT ASSEMBLY
.X =
.XX =
.XXX =
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES
TOLERANCES ARE:
ANGULAR =
MACHINED
FINISH =
CONFIRMED TO BE UNCLASSIFIED
CLASSIFIER:
DATE:
DERIVED FROM: ORG:
DRAWING: UNC PART: UNC
PROJECT
CONNECTOR
ZONEREV DESCRIPTION CHANGED BY MM/DD/YYCLASS REVIEW APPROVED
REVISIONS

4. 3.00
1.63
2.56
A
A
TOP VIEW 2.00
.31 .69
1.00
B
SECTION A-A
SCALE 1 : 1
32
R.06
R.06
R.03
60.00°
60.00°
.10
.22
DETAIL B
SCALE 6 : 1
Polish Radii
BOTTOM VIEW
SOLIDWORKS Die (Female).SLDDRW Die (Female).SLDPRT
A
B
C
D
8 7 6 5 4 3 2 1
Printed on Monday, May 09, 2016 11:00:04 AM
SCALE: NONE
DO NOT SCALE DRAWING
SIZE
B
CAGE CODE
88516
REV
SHEET 1 OF 1
DRAWING NUMBER
26Y-7671-1
BULGE TESTING PARTS
MST-16
AUTHOR
3D DRAFTER
CHECKED BY
APPROVED BY
SSH/TSB
RYAN LEON
ADAM FARROW
MANUEL LOVATO
MST-16
MET-2
MST-8
INITIAL RELEASE APPROVALS MM/DD/YY
DRAWING LEVEL: DEVELOPMENTAL
NEXT ASSEMBLY
.X =
.XX =
.XXX =
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES
TOLERANCES ARE:
ANGULAR =
MACHINED
FINISH =
CONFIRMED TO BE UNCLASSIFIED
CLASSIFIER:
DATE:
DERIVED FROM: ORG:
DRAWING: UNC PART: UNC
PROJECT
BIAXIAL SHEET TEST PARTS
DIE (FEMALE)
ZONEREV DESCRIPTION CHANGED BY MM/DD/YYCLASS REVIEW APPROVED
REVISIONS

5. 3.00
1.63
R1.28
A
A
1.00
1.13
.26
B
SECTION A-A
32
R.06
R.03
R.03
.26
60.00°
60.00°
.13
DETAIL B
SCALE 6 : 1
Polish Radii
SOLIDWORKS Die (Male).SLDDRW Die (Male).SLDPRT
A
B
C
D
8 7 6 5 4 3 2 1
Printed on Monday, May 09, 2016 11:01:48 AM
SCALE: NONE
DO NOT SCALE DRAWING
SIZE
B
CAGE CODE
88516
REV
SHEET 1 OF 1
DRAWING NUMBER
26Y-7671-1
BULGE TESTING PARTS
MST-16
AUTHOR
3D DRAFTER
CHECKED BY
APPROVED BY
SSH/TSB
RYAN LEON
ADAM FARROW
MANUEL LOVATO
MET-1
MST-16
MET-2
MST-8
INITIAL RELEASE APPROVALS MM/DD/YY
DRAWING LEVEL: DEVELOPMENTAL
NEXT ASSEMBLY
.X =
.XX =
.XXX =
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES
TOLERANCES ARE:
ANGULAR =
MACHINED
FINISH =
CONFIRMED TO BE UNCLASSIFIED
CLASSIFIER:
DATE:
DERIVED FROM: ORG:
DRAWING: UNC PART: UNC
PROJECT
BIAXIAL SHEET TEST PARTS
DIE (MALE)
ZONEREV DESCRIPTION CHANGED BY MM/DD/YYCLASS REVIEW APPROVED
REVISIONS

6. 3/4-16 Machine Threads
2.450 .005
.811 .002
.370 .001
.820 .002
.250 .003
R.125
1.123 .0025
2.320 2.200
.185 .001
.715
.130
.370 .001
.750
.210 .001
1.123 .0025
C
C
SECTION C-C
SOLIDWORKS BHG Configs.SLDDRW BHG Configs.SLDPRT
A
B
C
D
8 7 6 5 4 3 2 1
Printed on Friday, July 31, 2015 3:25:25 PM
SCALE: NONE
DO NOT SCALE DRAWING
SIZE
B
CAGE CODE
88516
REV
SHEET 1 OF 3
DRAWING NUMBER
BUTTON HEAD GRIP
CONFIGURATIONS
MST-16
AUTHOR
3D DRAFTER
CHECKED BY
APPROVED BY
ADAM FARROW
RYAN LEON
ADAM FARROW
MANUEL LOVATO
MET-2
MST-16
MET-2
MST-8
INITIAL RELEASE APPROVALS MM/DD/YY
DRAWING LEVEL: PRODUCT
NEXT ASSEMBLY
.X =
.XX =
.XXX =
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES
TOLERANCES ARE:
ANGULAR =
MACHINED
FINISH =
CONFIRMED TO BE UNCLASSIFIED
CLASSIFIER:
DATE:
DERIVED FROM: ORG:
DRAWING: UNC PART: UNC
PROJECT
ZONEREV DESCRIPTION CHANGED BY MM/DD/YYCLASS REVIEW APPROVED
REVISIONS

7. 3/4-16 Machine Threads
1.950 .005
.811 .002
.650 .001
.750 .002
R.125
.330
1.123 .0025
B
B
.650 .001
.750
.325 .001
.420 .001
.330 .003
.325 .001
.200
.845
.730
.130
1.7501.620
SECTION B-B
SOLIDWORKS BHG Configs.SLDDRW BHG Configs.SLDPRT
A
B
C
D
8 7 6 5 4 3 2 1
Printed on Friday, July 31, 2015 3:25:25 PM
SCALE: NONE
DO NOT SCALE DRAWING
SIZE
B
CAGE CODE
88516
REV
SHEET 2 OF 3
DRAWING NUMBER
MST-16

8. .811 .002
.670 .001
.750 .002
.330 .003
R.125
1.950 .005
1.750 1.620
.876
.200
1.123
A
A
.630 .001
.750
.315 .001
.430 .001
3/4-16 Machine Threads
.733.130
SECTION A-A
SOLIDWORKS BHG Configs.SLDDRW BHG Configs.SLDPRT
A
B
C
D
8 7 6 5 4 3 2 1
Printed on Friday, July 31, 2015 3:25:25 PM
SCALE: NONE
DO NOT SCALE DRAWING
SIZE
B
CAGE CODE
88516
REV
SHEET 3 OF 3
DRAWING NUMBER
MST-16

9. DIMENSIONING AND TOLERANCING PER ASME Y14.5M-1994.200
ABBREVIATIONS PER ASME Y14.38-1999.104
ENGRAVE PART NUMBER AND REVISION LEVEL
TO FIT APPROXIMATELY WHERE SHOWN.
CHARACTERS .160 HIGH MAXIMUM.
EXAMPLE: 4Y17612XX REV A
901
SURFACE TEXTURE SYMBOLS IN ACCORDANCE WITH ASME Y14.36M-1996.212
SURFACE TEXTURE IN ACCORDANCE WITH ASME B46.1-1995.213
COUNTERSINK ALL TAPPED HOLES TO MAJOR DIA.226
REMOVE BURRS AND SHARP EDGES TO .015 MIN.233
ALL INSIDE CORNERS TO BE R.015 MAX.237
THOROUGHLY CLEAN PARTS TO REMOVE ALL OIL,
GREASE, DIRT, CHIPS, ETC.
500
FOR TECHNICAL QUESTIONS, CONTACT:
RYAN LEON, (505) 412-7296
900
PRELIMINARY
FOR INFORMATION OR REVIEW ONLY.
DO NOT USE FOR FABRICATION OR PROCUREMENT.
DRAWING CONTENT SUBJECT TO FUTURE CHANGES.
REVIEW COPY A01
8.990
6.540
3.100
3.350
2.450
1.650
2.450
.125
1.123
.210
3/4-16 Machine Threads
1.252
CAD CALCULATED WEIGHT: .456 LB, DENSITY: 0.000 LB/IN^3
NOTES (UNLESS OTHERWISE SPECIFIED)
UNCLASSIFIED
UNCLASSIFIED
UNCLASSIFIED
UNCLASSIFIED
SOLIDWORKS Calibration Load Train Assembly.SLDDRW Calibration Load Train Assembly.SLDPRT
A
B
C
D
8 7 6 5 4 3 2 1
Printed on Monday, May 09, 2016 11:13:13 AM
SCALE: NONE
DO NOT SCALE DRAWING
SIZE
B
CAGE CODE
88516
REV
A
SHEET 1 OF 1
DRAWING NUMBER
CALIBRATION LOAD TRAIN
ASSEMBLY
MST-16
AUTHOR
3D DRAFTER
CHECKED BY
APPROVED BY
TARIK SALEH
RYAN LEON
TARIK SALEH
MST-16
MST-16
MST-16
INITIAL RELEASE APPROVALS
MM/DD/YY
DRAWING LEVEL: DEVELOPMENTAL
NEXT ASSEMBLY
.X = .03
.XX = .01
.XXX = .005
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES
TOLERANCES ARE:
ANGULAR = 1
MACHINED
FINISH = 63
CONFIRMED TO BE UNCLASSIFIED
CLASSIFIER:
DATE:
DERIVED:
DRAWING: UNC PART: UNC
PROJECT
ZONEREV DESCRIPTION CHANGED BY MM/DD/YYCLASS REVIEW APPROVED
REVISIONS
SIGNATURES ON FILE

10. 1/8-27 NPSM Tapped Hole
.14
.13
.62
.41
.52
.25.31
.10
.34
.16
135.00°
.52
.62
AA
2.00
2.00
1.00 .13
.25
.50
SECTION A-A
SCALE 1.5 : 1
SOLIDWORKS Middle Plate.SLDDRW Middle Plate.SLDPRT
A
B
C
D
8 7 6 5 4 3 2 1
Printed on Tuesday, August 11, 2015 12:48:32 PM
SCALE: NONE
DO NOT SCALE DRAWING
SIZE
B
CAGE CODE
88516
REV
SHEET 1 OF 1
DRAWING NUMBER
MIDDLE PLATE
MST-16
AUTHOR
3D DRAFTER
CHECKED BY
APPROVED BY
RYAN LEON
ADAM FARROW
MANUEL LOVATO
MST-16
MET-2
MST-8
INITIAL RELEASE APPROVALS MM/DD/YY
DRAWING LEVEL: PRODUCT
NEXT ASSEMBLY
COOLING PLATE
.X =
.XX =
.XXX =
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES
TOLERANCES ARE:
ANGULAR =
MACHINED
FINISH =
CONFIRMED TO BE UNCLASSIFIED
CLASSIFIER:
DATE:
DERIVED FROM: ORG:
DRAWING: UNC PART: UNC
PROJECT
ZONEREV DESCRIPTION CHANGED BY MM/DD/YYCLASS REVIEW APPROVED
REVISIONS

11. DIMENSIONING AND TOLERANCING PER ASME Y14.5M-1994.200
ABBREVIATIONS PER ASME Y14.38-1999.104
ENGRAVE PART NUMBER AND REVISION LEVEL
TO FIT APPROXIMATELY WHERE SHOWN.
CHARACTERS .160 HIGH MAXIMUM.
EXAMPLE: 4Y17612XX REV A
901
SURFACE TEXTURE SYMBOLS IN ACCORDANCE WITH ASME Y14.36M-1996.212
SURFACE TEXTURE IN ACCORDANCE WITH ASME B46.1-1995.213
COUNTERSINK ALL TAPPED HOLES TO MAJOR DIA.226
REMOVE BURRS AND SHARP EDGES TO .015 MIN.233
ALL INSIDE CORNERS TO BE R.015 MAX.237
THOROUGHLY CLEAN PARTS TO REMOVE ALL OIL,
GREASE, DIRT, CHIPS, ETC.
500
FOR TECHNICAL QUESTIONS, CONTACT:
RYAN LEON, (505) 412-7296
900
PRELIMINARY
FOR INFORMATION OR REVIEW ONLY.
DO NOT USE FOR FABRICATION OR PROCUREMENT.
DRAWING CONTENT SUBJECT TO FUTURE CHANGES.
REVIEW COPY A01
.125
1.157
AA
2.875 2.125
.125
1.875 .054 .125
.071
.375
.125
.125
.125
2.000
2.500
2.250
2.124
1.688
1.563
1.438
.625
.125
SECTION A-A
R 0.063
Mirror features on both sides
CAD CALCULATED WEIGHT: .185 LB, DENSITY: .036 LB/IN^3
NOTES (UNLESS OTHERWISE SPECIFIED)
UNCLASSIFIED
UNCLASSIFIED
UNCLASSIFIED
UNCLASSIFIED
SOLIDWORKS Furnace Housing.SLDDRW Furnace Housing.SLDPRT
A
B
C
D
8 7 6 5 4 3 2 1
Printed on Wednesday, March 02, 2016 4:06:16 PM
SCALE: NONE
DO NOT SCALE DRAWING
SIZE
B
CAGE CODE
88516
REV
A
SHEET 1 OF 1
DRAWING NUMBER
FURNACE HOUSING
MST-16
AUTHOR
3D DRAFTER
CHECKED BY
APPROVED BY
MANUEL LOVATO
RYAN LEON
MST-8
MST-16
INITIAL RELEASE APPROVALS
MM/DD/YY
DRAWING LEVEL: DEVELOPMENTAL
NEXT ASSEMBLY
.X = .03
.XX = .01
.XXX = .005
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES
TOLERANCES ARE:
ANGULAR = 1
MACHINED
FINISH = 63
CONFIRMED TO BE UNCLASSIFIED
CLASSIFIER:
DATE:
DERIVED:
DRAWING: UNC PART: UNC
PROJECT
ZONEREV DESCRIPTION CHANGED BY MM/DD/YYCLASS REVIEW APPROVED
REVISIONS
SIGNATURES ON FILE

13. 6
5
4
1
3
2
Assembly Notes:
Screw plunger (Item 10) into Items 2& 5 until ball1.
protrudes approx. 1/32 inch
Assemble items 2, 3 &4 and lightly tighten2.
assembly with bolt (Item 9)
Rotate Item 4 until an outer hole aligns with Item 23.
Insert .156 drill bit in hole, tighten screw Item 94.
Assemble Item 5 into Item 45.
Locate Item 7 under Item 6, assemble unit into6.
Item 5 (with .156 drill bit in position)
Lightly tighten Item 6 to Item 5 with bolt (Item 8)7.
Remove .156 drill bit from assembly8.
Rotate Item 6 until correct sequence order is9.
established by rotating Item 5
Tighten Item 8 bolt securely10.
Adjust Item 10 until minimum play is found.11.
Screw in Item 11 to Lock Item 10 in place12.
Punch small indent at outside of Item 5 to lock 1413.
Screw in items 13 &12. Cycle unit unit to insure14.
proper operation
General Notes (unless otherwise noted)
All dimensions are in inches1.
Dimensioning and tolerancing per ANSI Y14.5M-19822.
Remove all burrs and break sharp edges, including holes .015 max3.
All inside (fillet) radii to be .015 max4.
Countersink 82 degrees all tapped holes to major diameter5.
All diameteral features shown on a common axis shall be coaxial6.
within a cylindrical tolerance zone that has a diameter equal to
the average of their total size tolerance
Welding symbols per ANSI/AWS A2.4-19867.
Surface texture per ANSI/ASME B46.1-1985 and surface texture8.
symbols per ANSI Y14.36-1978
Do not scale drawing for dimensions9.
Stake Item 10 into Item 5 after proper alignment is achieved10.
between Item 10 and Item 6
ITEM NO. DESCRIPTION Explode/QTY.
1 128Y-271007 1
2 128Y-271007 1
3 128Y-271007 1
4 128Y-271007 1
5 128Y-271007 1
6 128Y-271007 1
SOLIDWORKS Horizontal Rotary Specimen Holder Assy.SLDDRW 128Y-271007-01 Horizontal Rotary Specimen Holder Assy.SLDPRT
A
B
C
D
8 7 6 5 4 3 2 1
Printed on Monday, May 09, 2016 11:59:29 AM
SCALE: NONE
DO NOT SCALE DRAWING
SIZE
B
CAGE CODE
88516
REV
A
SHEET 1 OF 1
DRAWING NUMBER
HORIZONTAL ROTARY SPECIMEN
MST-16
AUTHOR
3D DRAFTER
CHECKED BY
APPROVED BY
TARIK SALEH
RYAN LEON
TARIK SALEH
MST-16
MST-16
MST-16
INITIAL RELEASE APPROVALS MM/DD/YY
DRAWING LEVEL: DEVELOPMENTAL
NEXT ASSEMBLY
.X = .03
.XX = .01
.XXX = .005
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES
TOLERANCES ARE:
ANGULAR = 1
MACHINED
FINISH = 63
CONFIRMED TO BE UNCLASSIFIED
CLASSIFIER:
DATE:
DERIVED FROM: ORG:
DRAWING: UNC PART: UNC
PROJECT
HOLDER ASSEMBLY
ZONEREV DESCRIPTION CHANGED BY MM/DD/YYCLASS REVIEW APPROVED
REVISIONS

14. DIMENSIONING AND TOLERANCING PER ASME Y14.5M-1994.200
ABBREVIATIONS PER ASME Y14.38-1999.104
ENGRAVE PART NUMBER AND REVISION LEVEL
TO FIT APPROXIMATELY WHERE SHOWN.
CHARACTERS .160 HIGH MAXIMUM.
EXAMPLE: 4Y17612XX REV A
901
SURFACE TEXTURE SYMBOLS IN ACCORDANCE WITH ASME Y14.36M-1996.212
SURFACE TEXTURE IN ACCORDANCE WITH ASME B46.1-1995.213
COUNTERSINK ALL TAPPED HOLES TO MAJOR DIA.226
REMOVE BURRS AND SHARP EDGES TO .015 MIN.233
ALL INSIDE CORNERS TO BE R.015 MAX.237
THOROUGHLY CLEAN PARTS TO REMOVE ALL OIL,
GREASE, DIRT, CHIPS, ETC.
500
FOR TECHNICAL QUESTIONS, CONTACT:
RYAN LEON, (505) 412-7296
900
PRELIMINARY
FOR INFORMATION OR REVIEW ONLY.
DO NOT USE FOR FABRICATION OR PROCUREMENT.
DRAWING CONTENT SUBJECT TO FUTURE CHANGES.
REVIEW COPY A01
CAD CALCULATED WEIGHT: .472 LB, DENSITY: 0.000 LB/IN^3
NOTES (UNLESS OTHERWISE SPECIFIED)
UNCLASSIFIED
UNCLASSIFIED
UNCLASSIFIED
UNCLASSIFIED
SOLIDWORKS Compression Cage Assembly.SLDDRW Compression Cage Assembly.SLDASM
A
B
C
D
8 7 6 5 4 3 2 1
Printed on Monday, May 09, 2016 12:14:21 PM
SCALE: NONE
DO NOT SCALE DRAWING
SIZE
B
CAGE CODE
88516
REV
A
SHEET 1 OF 1
DRAWING NUMBER
COMPRESSION CAGE ASSEMBLY
MST-16
AUTHOR
3D DRAFTER
CHECKED BY
APPROVED BY
RYAN LEON
ADAM FARROW
MST-16
MET-2
INITIAL RELEASE APPROVALS
MM/DD/YY
DRAWING LEVEL: DEVELOPMENTAL
NEXT ASSEMBLY
.X = .03
.XX = .01
.XXX = .005
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES
TOLERANCES ARE:
ANGULAR = 1
MACHINED
FINISH = 63
CONFIRMED TO BE UNCLASSIFIED
CLASSIFIER:
DATE:
DERIVED:
DRAWING: UNC PART: UNC
PROJECT
ZONEREV DESCRIPTION CHANGED BY MM/DD/YYCLASS REVIEW APPROVED
REVISIONS
SIGNATURES ON FILE

15. DIMENSIONING AND TOLERANCING PER ASME Y14.5M-1994.200
ABBREVIATIONS PER ASME Y14.38-1999.104
ENGRAVE PART NUMBER AND REVISION LEVEL
TO FIT APPROXIMATELY WHERE SHOWN.
CHARACTERS .160 HIGH MAXIMUM.
EXAMPLE: 4Y17612XX REV A
901
SURFACE TEXTURE SYMBOLS IN ACCORDANCE WITH ASME Y14.36M-1996.212
SURFACE TEXTURE IN ACCORDANCE WITH ASME B46.1-1995.213
COUNTERSINK ALL TAPPED HOLES TO MAJOR DIA.226
REMOVE BURRS AND SHARP EDGES TO .015 MIN.233
ALL INSIDE CORNERS TO BE R.015 MAX.237
THOROUGHLY CLEAN PARTS TO REMOVE ALL OIL,
GREASE, DIRT, CHIPS, ETC.
500
FOR TECHNICAL QUESTIONS, CONTACT:
RYAN LEON, (505) 412-7296
900
PRELIMINARY
FOR INFORMATION OR REVIEW ONLY.
DO NOT USE FOR FABRICATION OR PROCUREMENT.
DRAWING CONTENT SUBJECT TO FUTURE CHANGES.
REVIEW COPY A01
A
A
SECTION A-A
CAD CALCULATED WEIGHT: .689 LB, DENSITY: 0.000 LB/IN^3
NOTES (UNLESS OTHERWISE SPECIFIED)
UNCLASSIFIED
UNCLASSIFIED
UNCLASSIFIED
UNCLASSIFIED
SOLIDWORKS Punch Die Assembly V2.SLDDRW Punch Die Assembly V2.SLDPRT
A
B
C
D
8 7 6 5 4 3 2 1
Printed on Tuesday, May 03, 2016 3:25:18 PM
SCALE: NONE
DO NOT SCALE DRAWING
SIZE
B
CAGE CODE
88516
REV
A
SHEET 1 OF 1
DRAWING NUMBER
PUNCH DIE ASSEMBLY
MST-16
3D DRAFTER
CHECKED BY
APPROVED BY
RYAN LEON
TARIK SALEH
MST-16
MST-16
INITIAL RELEASE APPROVALS
MM/DD/YY
DRAWING LEVEL: DEVELOPMENTAL
NEXT ASSEMBLY
.X = .03
.XX = .01
.XXX = .005
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES
TOLERANCES ARE:
ANGULAR = 1
MACHINED
FINISH = 63
CONFIRMED TO BE UNCLASSIFIED
CLASSIFIER:
DATE:
DERIVED:
DRAWING: UNC PART: UNC
PROJECT
ZONEREV DESCRIPTION CHANGED BY MM/DD/YYCLASS REVIEW APPROVED
REVISIONS
SIGNATURES ON FILE