The document provides instructions for configuring router PT 0 and static routes on various interfaces. It includes steps to enter IP addresses, subnet masks, and default gateways on FastEthernet0/0, serial 2/0, and serial 3/0 interfaces as shown in an accompanying diagram. The configurations are tested by pinging to verify the static routes are successfully established.

1. Seting router PT 0 .
Klik FastEthernet0/0

2. Masukan IP Adress (192.168.1.1)

3. Masukan serial 2/0

4. Masukan serial 3/0
Atur static sepertigambar

5. Masukan IP address ,Subnet Mask ,Default Gatewayseperti yang di atas

6. MasukFastEthernet0/0

7. Masukan IP Address (192.168.1.49)
Dan subnet Mask (255.255.255.240)

8. Masukan serial 3/0
Atur static sepertigambar

9. Masukan IP address, subnet mask ,default gateway seperti di atas

10. Masuk FastEthernet0/0

11. Masukan IP Address, subnet mask sepertigambar di atas

12. Masukan IP Adress , subnet mask sepertigambar di atas

13. Masukan IP Adress , subnet mask sepertigambar di atas

14. Atur static sepertigambar

15. Masukan IP address, subnet mask ,default gateway seperti di atas

16. SesudaKamu ping BerhasilBerartikamusudaselesai