To copy a specified partition makes it much easier to backup data, and users even can upgrade old disk without reinstalling Windows OS.

1. Free Partition Copy with MiniTool Partition
Wizard
About “Copy Partition”
Copy Partition feature copies all data information from one partition to another without
any data loss and in simple operations. Under the following 2 situations, to copy partition
is a quite good choice.
1.Plan to upgrade old disk without reinstalling Windows – directly copy system partition
and boot partition to new disk.
2.Backup important files and programs which are saved in one partition for faster recovery
– just copy the whole partition since copying files one by one is so time-wasting.
3.Transfer Windows to a solid state disk for better performance.
When MiniTool Partition Wizard is copying partition, data protecting solutions such as
power-off protection will be activated automatically. Don’t worry about data security even if
power outage emerges without redundant power supply.
--Source from http://www.partitionwizard.com/help/copy-partition.html
How to Copy Partition
Step 1: run MiniTool Partition Wizard to get its main interface:

2. Step 2: select the partition which needs copying and choose “Copy Partition” from the left
side or choose “Copy” from the tool bar. Take partition E for example.

3. Step 3: choose an unallocated space from partition list to save the copy of the selected
partition and click “Next>”. Note: unallocated space should be large enough to hold all
data on the source partition.

4. Here, we can see the option “Copy the partition with resize” which is checked by default.
Keep it checked if you want to change partition size.
Step 4: Lengthen the rectangle bar to enlarge a partition or shorten it to shrink a partition.
Then, click “Finish”.

5. Now we can see the copy of partition E has been created but does not have a drive letter.
If users want to make the very copy visible in Computer, just appoint a drive letter via the
function “Change Drive Letter”. If not, directly click “Apply” button on the left top corner to
perform pending operations.