ldata.co.il_DataLightning_StrainGaugeAndRHProbe_.pdf
•
0 likes•3 views
tutorial data-lightning acquisition from strain gauge lab-jerk devices
Recommended
Recommended
More Related Content
More from Leonid Ledata
More from Leonid Ledata (20)
Recently uploaded
Recently uploaded (20)
ldata.co.il_DataLightning_StrainGaugeAndRHProbe_.pdf
- 1. 09/01/2024, 00:15 ldata.co.il/DataLightning/StrainGaugeAndRHProbe/ www.ldata.co.il/DataLightning/StrainGaugeAndRHProbe/ 1/8 Acquisition from a strain gauge with a T7 and a digital temperature-humidity probe using the T4 Both devices, the T7 and the T4 are connected by a network cable to the router. Press the "Acquire" button on the main form, and next on the acquisition form, press the "Configuration" button.
- 3. 09/01/2024, 00:15 ldata.co.il/DataLightning/StrainGaugeAndRHProbe/ www.ldata.co.il/DataLightning/StrainGaugeAndRHProbe/ 3/8 Choose T7 (in the T7 list) and "Add measurement". Choose "AIN1", "24bit" resolution, and +-1V BIP range...The strain gauge is connected using the "INAMP" amplifier and such way the approximate voltage is 0.3V. Then press OK. Next add the digital temperature-humidity probe, which is connected to the T4. The green(data) which is temperature is connected to FIO4 (Digital Input) ,
- 4. 09/01/2024, 00:15 ldata.co.il/DataLightning/StrainGaugeAndRHProbe/ www.ldata.co.il/DataLightning/StrainGaugeAndRHProbe/ 4/8 the white(humidity) to the FIO5 (Digital Input) ,
- 5. 09/01/2024, 00:15 ldata.co.il/DataLightning/StrainGaugeAndRHProbe/ www.ldata.co.il/DataLightning/StrainGaugeAndRHProbe/ 5/8 the Power and the enable are FIO6 and FIO7, which are set as digital outputs and the voltage value is set to 1.
- 7. 09/01/2024, 00:15 ldata.co.il/DataLightning/StrainGaugeAndRHProbe/ www.ldata.co.il/DataLightning/StrainGaugeAndRHProbe/ 7/8 Then close the configuration by clicking "OK" and press the "Start aquisition" The chart is plotted and the "FIO6" and "FIO7" may be hidden from the screen by pressing the "Series Options", and de-checking the series.