1. LAngle
The legs of the “L” are often equal or unequal long . L angles are used for various purposes during a number of
industries. Framing is one among the foremost common uses for L angles, but L angles also are used for brackets,
trim, reinforcements, and lots of other uses. L Angle is additionally referred to as angle bracket or steel angle bar. It's
basically manufactured by hot-rolled steel or high-strength low steel .
Website: https://www.shreejisteelcorp.com/
2. ● Product Name L Angle
● Type Equal Angle
● Brand Shree Ji
● Standard IS 1786
● Material Mild Steel
● Place of Origin Kolkata/Durgapur
● Minimum order Quantity within West
Bengal
16 Metric Ton
● Minimum order Quantity Outside of West
Bengal
25 Metric Ton
● Application Construction
● Usage Engineering Structure Fabrication Activities
LAngle Sizes and Weights
Size (in mm) Weight (in Kg/sq. m) Weight (in Kg/sq. feet)
19x19x3 0.860 0.262
20x20x3 0.900 0.274
23x23x3 1.046 0.319
25x25x3 1.099 0.335
25x25x5 1.798 0.548
30x30x3 1.400 0.426
30x30x5 2.600 0.792
31x31x3 1.280 0.390
35x35x5 2.599 0.792
37x37x3 1.700 0.518
38x38x3 1.850 0.564
40x40x3 1.798 0.548
Website: https://www.shreejisteelcorp.com/
4. 90x90x10 13.400 4.094
90x90x12 15.799 4.815
100x100x6 9.100 2.804
LAngle Sizes and Weights
Size (in mm) Weight (in Kg/sq. m) Weight (in Kg/sq. feet)
100x100x8 12.097 3.687
100x100x10 14.912 4.545
100x100x12 17.701 5.395
110x110x8 13.400 4.084
110x110x10 16.499 5.028
110x110x12 19.600 5.974
130x130x8 15.800 4.815
130x130x10 19.699 6.004
130x130x12 23.300 7.101
150x150x10 22.803 6.950
150x150x12 27.199 8.290
150x150x16 35.800 10.911
150x150x20 44.100 10.911
Rolling Tolerances of LAngle
Leg Length Sectional weight Length
Up to 45 mm : ± 1.5 mm 3 mm thickness : ± 5 % For fixed length :
± 100 mm
45 mm to 100 mm : ± 2 mm Over 3 mm thickness :5/-3%
Above 100 mm : ± 2 %
Website: https://www.shreejisteelcorp.com/
5. LAngle Chemical Composition: (in % max values)
Carbon
%
Manganese
Max %
Sulphur
Max %
Phosporous
Max %
Silicon
Max %
Equivalent
0.23 1.50 0.045 0.045 0.40 0.42
Tolerance +0.02 +0.05 +0.005 +0.005 +0.03 +0.03
MS Angle Mechanical Composition: (in % max values)
Tensile Strength
Min, Mpa
Yield Stress, Min, MPa % Elongation at
gauge length
5.65 √Ѕo
Bend Test
mm <20 mm 20-40 mm >40 mm min min
410 250 240 230 23 3t* (*t is 3
times
thickness)
Website: https://www.shreejisteelcorp.com/