(http://www.indiancolourindustriesindia.com) We are a foremost company engrossed in manufacturing, supplying and wholesaling an elite array of Cement Paint, Cement Primer, Synthetic Enamel, Acrylic Distemper, White Cement Putty, Acrylic Plastic Emulsion Paint, Exterior Emulsion and Wall Texture Paint. All our products are praised by patrons for their accurate composition, faster drying, high bonding strength, excellent performance and longer shelf life.
Call Now ☎️🔝 9332606886🔝 Call Girls ❤ Service In Bhilwara Female Escorts Serv...
Primer and Decorative Paints By Indian Colour Industries (India)
1.
2. To be respected as an ethical
and sustainable company and
acknowledged as the leading provider for
painting solution.
3. At Indian Colour Industries (India) we strive to provide products that help make
people’s lives more vibrant and colourful. By way of a brief introduction, since our
founding in early 1984, Noida, India, we have been moving forward at a rapid pace
by capitalizing on all growth opportunities and improving our operating efficiency
so as to expand on our global presence and sharpen our product portfolio.
With so much building activity taking place, there has also been the need for paints,
be it for road marking, protecting buildings or simple for decoration. We are proud
to say that our company has developed a Market to fulfil every possible
requirement.
Product quality and customer service are the prime reasons for the company’s
success. All the raw materials and each batch of paints undergo rigorous
laboratory testing to ensure it is of the high standard. We also ensure that all orders
are fulfilled rapidly, with computerized colour tinting system being able to
immediately produce paints in any chosen colour. We have distribution centres
located in different locations to serve our customers in the key markets, with paint
solutions to meet their needs.
To conclude, we would like to emphasize that Indian Colour Industries (India) has a
clear-cut vision of the future and will always thrive to make its presence deeper
and stronger in the local and international markets. A consistent growth pattern
will definitely be maintained in its investment and progress.
4. Cement paint is water based paint and is applied to either exterior or interior
including brick work and concrete. It is used for painting exterior wall surface
mainly for preventing water penetration and reductions of dirt collection. It is
suitable for coating concrete as well as decorating indoor and outdoor walls.
Drying Time : Min. 18 hours (After applying second coat)
Finishing : Smooth & Matt
Brush ability : Smooth & Uniform
Theatrical Spreading Rate : 3.5 to 5.5 Sqm/Kg
( depending on application method, nature of surface, film
thickness etc. and colour (Shade).
Recommended use : Recommended for interior purpose and can be used on
concrete, plaster, brick wall & rough cast etc.
All loose paint, dust, dirt, & grease needs to be completely removed with stiff brush. Wash the surface
with clean water.
It Can Be applied by Brush & Spray - Klater Ratio 1:1 (1 part of material and 1 part of water). the
first coat should be will brushed into the surface to force a good bond. The second coat should be
applied carefully after proper curing.
Thinning : For thinning ad 5 to 15 % natural G.P Thinning ( depending on application method)
5. Indian Colour Industries (India) “WALL PUTTY” is White Cement & Polymer based
putty for use on cement concrete - mortar interior / exterior walls for smoother &
stronger adhesion and best suited to minimize paint cost and extend its durability.
Use of best quality imported additives and an advanced manufacturing process
makes it better than other wall putties due to its better water resistance,
workability, smoothness and durability.
Drying Time
Touch Dry : 1.5 hours
Hard Dry : 10 hours
Finishing : Smooth & Matt
Brush ability : Smooth & Uniform
Theatrical Spreading Rate : 15 to 20 Sq. feet/Kg
( depending on application method, nature of surface,
film thickness )
Recommended use : Recommended for interior & exterior purpose and can be
used on concrete, plaster, brick wall & rough cast etc.
All loose paint, dust, dirt, & grease needs to be completely removed with stiff brush. Wash the surface
with clean water.
Make a paste of ” Indian colour industries(India)” WALL PUTTY with water and apply on the already
moistened surface in upward direction uniformly with putty blade. On drying remove the projected
marks gently with putty blade. After about 2-4 hrs. apply second coat of wall putty and see that the total
thickness of putty on the wall is about 1½ mm. Allow the surface to dry completely and remove any
marks with putty blade then rub the surface gently with very fine emery paper before application of
paint.
Super Milky White
6. Exterior Emulsion is high performance premium water based, long lasting exterior paint
Special Formulation. It is formulated to suit the extreme conditions of high rainfall, humidity and
heat. The product is based on 100% Acrylic resin and hence it forms a tough and flexible
protective film, with an excellent bonding to the substrate, which prevents peeling off or
cracking for years together. It contains special type of emulsion which gives
Excellent Dirt-pickup Resistance
Excellent Sheen.
All In One Exterior Emulsion contains a Special combination of surface protectants, which are
released slowly over a long period of time. This actively helps not only to prevent the fungal and
algae growth, but also, ensures constant surface activity against these irritants for a long period.
It also offers a long lasting sustainability
Drying Time :
Touch dry : 45 Minutes.
Hard dry : Min 3 hours (After Applying second coat).
Finishing : Smooth & Semi Gloss
Brush ability : Smooth & Uniform
Theatrical Spreading Rate : 6.5 to 9.5 Sq. m/Lt
( depending on application method, nature of surface, film
thickness etc. and colour (Shade).
Recommended use : Recommended for exterior purpose and can be used on
concrete, plaster, gypsum and wooden surface etc.
All loose paint, dust, dirt, & grease needs to be completely removed with stiff brush. Wash the surface
with clean water.
It Can Be Applied by various method’s such as Roller, brush & spray
With solution of 2 parts of material with 1 part of water.
7. Our Texture paint, made of a special grade emulsion, provides defence against all
weather conditions. It includes a tough andflexible resin along with many exclusive
additives. Its fine colorants and chemical inertness guarantee longevity and fine
texture. Our Texture also contains controlled quartz particle size distribution
which enables the paint to spread over uniformly.
Drying Time : Min 5 hours (After Applying second coat).
Finishing : Smooth & Matt (Depend On Surface)
Brush ability : Smooth & Uniform
Theatrical Spreading Rate : 3.5 to 4.5 Sqm/Lt for one coat and same
( depending on application method, nature of surface, film
thickness etc. and colour (Shade).
Recommended use : Recommended for interior & exterior purpose and can be used
on concrete, brick wall ,plaster, gypsum and wooden surface
Can be applied by brushing rolling or stippling. Maximum up to 10% clean water for single coat and 20%
second coat.
8. Texture Smooth, made of a special grade emulsion, provides defence against all
weather conditions. It includes a tough and flexible resin along with many
exclusive additives. Its fine colorants and chemical inertness guarantee longevity
and fine texture. Our Texture Smooth Provides Walls Royal Look with a Long list of
colour variations.
Drying Time : 3 Hours (before applying second coat)
Finishing : Smooth & Matt (Depend on surface)
Brush ability : Smooth & Uniform
Theatrical Spreading Rate : 5.5 to 7.5 Sqm/Lt for one coat and same.
( depending on application method, nature of surface, film
thickness etc. and colour (Shade).
Recommended use : Recommended for interior & exterior purpose and can be
used on concrete, plaster, brickwall, hardboard and wooden
surface etc.
Can be applied by brushing rolling or stippling.
Maximum up to 40% clean water for single coat and same for second coat.
9. Acrylic washable Distemper is a water-based, interior wall paint and gives walls a
delightful, attractive, matt finish that lasts for ages.
A time-tested formulation with acrylic copolymer binder, its special formulation
ensures shade retention for a long time and its fast drying property facilitates
quicker completion of painting jobs.
Drying Time :
Touch dry : Min. 30 Minutes.
Hard dry : Min 3 hours (After Applying second coat).
Finishing : Smooth & Matt
Brush ability : Smooth & Uniform
Theatrical Spreading Rate : 2.5 to 4.5 Sqm/Kg
( depending on application method, nature of surface, film
thickness etc. and colour (Shade).
Recommended use : Recommended for interior purpose and can be used on
concrete, plaster, gypsum and wooden surface etc.
It Can Be Applied by various method’s such as Roller, brush & spray
With solution of 30-40% Water with respect to material.
10. Plastic emulsion paints are innovated for Interior Wall Finish Which provides a
very tough and durable finish to your walls. When applied with Various methods(As
described below), it imparts a characteristic pattern on to the wall. A solvent based
finish, on drying, it develops a hard tough film which is highly durable, washable
and exhibits superior water repellence. This makes walls painted with Lustre stain
resistant and very easy to maintain and at the same time provide royal look to your
place.
Drying Time
Touch Dry : 4 minutes (depends on weather conditions)
Hard Dry : 4 hours
Finishing : Smooth & Semi Gloss
Brush ability : Smooth & Uniform
Theatrical Spreading Rate : 8.5 to 12.5 Sq. m/Lt
( depending on application method, nature of surface,
film thickness )
Recommended use : Recommended for interior purpose and can be
used on wall putty finished walls & can be applied on exterior wall.
All loose paint, dust, dirt, & grease needs to be completely removed with stiff brush. Wash the surface
with clean water.
Add 1 part by weight of water to 2 parts by weight of emulsion for brushing consistency.
11. Silk Touch Emulsion is an exquisite emulsion paint that provides a luxurious
finish and a silky glowing appearance to your walls. A water-based, 100%
acrylicinterior wall finish, it has excellent flow giving a near brush mark free
finish. It also offers high stain resistance - walls painted with Silk Touch are
easy to cleanand maintain that new look for years. Silk Touch also offers good
anti-fungal properties, and can be applied on all types of smooth plasters, false
ceilings, asbestos sheets, concrete etc.
Drying Time
Touch Dry : 20 minutes (depends on weather conditions)
Hard Dry : 2 hours
Finishing : Shinning Surface
Brush ability : Smooth & Uniform
Theatrical Spreading Rate : 7.5 to 11.5 Sq. m/Lt
( depending on application method, nature of surface,
film thickness and colour shade )
Recommended use : Recommended for interior & exterior walls , wood,
concrete plaster.
All loose paint, dust, dirt, & grease needs to be completely removed with stiff brush. After applying the
primer coat . Can be applied with both brush and spray. Finest result are obtained by applying minimum
2 coats but second coat after 8 hours.
Thinning : For thinning add 2 parts of material with 1 part of water.
12. Indian Colour Industries(India) Cement Primer is a water based protective primer
suitable for use on wall applications on plastered, masonry, POP , Limed or pre-
painted surfaces. It is specially formulated to give better adhesion on the surface
with excellent undercoat adhesion. Correct application of primer ensures better
quality and durability of finish coat.
Drying Time
Touch Dry : 40 minutes
Hard Dry : 2.5 hours
Finishing : Smooth & Matt
Brush ability : Smooth & Uniform
Theatrical Spreading Rate : 7 to 10 Sq. m/Lt
( depending on application method, nature of surface,
film thickness )
Recommended use : Recommended for interior & exterior purpose and can be
used on concrete, plaster, brick wall & wooden surface.
All loose paint, dust, dirt, & grease needs to be completely removed with stiff brush. Wash the surface
with clean water.
Add 1 part by weight of water to 2 parts by weight of primer for brushing consistency.
Super Milky White
13. High quality mid-sheen enamel paint that not only enhances beauty of home, but is
also a tough paint film that protects interior surfaces for years. Recommended for
interiors use, both plastered walls and wooden surfaces. If touched-up with roller
while it is wet, it offers a pearl-like finish.
Washable
Stain Resistant
Drying Time
Touch Dry : 90 minutes (depends on weather conditions)
Hard Dry : 6 hours
Finishing : Smooth & Glossy
Brush ability : Smooth & Uniform
Theatrical Spreading Rate : 8 to 12.5 Sq. m/Lt
( depending on application method, nature of surface,
film thickness )
Recommended use : Recommended for interior purpose and can be
used on exterior , interior walls , metals, wood, concrete plaster.
All loose paint, dust, dirt, & grease needs to be completely removed with stiff brush. After applying the
primer coat . Can be applied with both brush and spray. Finest result are obtained by applying minimum
2 coats but second coat after 8 hours.
Thinning : For thinning add 5-15% natural G.P Thinner (Depending on application method).
14. Indian Colour Industries (India) Oil Based Primer, Sealer & Undercoat is a rapid
drying interior/exterior prep coat with excellent hiding, filling and sanding
properties and good hold-out for enamel topcoats.
Drying Time :
Touch dry : Min. 90 Minutes.
Hard dry : Min 6 hours
Finishing : Smooth & Matt
Brush ability : Smooth & Uniform
Theatrical Spreading Rate : 2.5 to 4.5 Sqm/Lt
( depending on application method, nature of surface, film
thickness etc. and colour (Shade).
Recommended use : Recommended for interior& exterior purpose
can be applied on metal ,wooden surface etc.
It Can Be Applied by various method’s such as Roller, brush & spray
FOR THINING : Add 5-15% natural G.P.Thinner (depending on application method
15. AMPUS® Anti Carb Primer is a specially formulated acrylic anti-carbonation primer suitable for
application as undercoat to AMPUS® Anti Carbonation Coating.
Drying Time
Touch Dry : 20 minutes (depends on weather conditions)
Hard Dry : 6-8 hours
Finishing : Matt, No Sheen
Brush ability : Smooth & Uniform
Theatrical Spreading Rate : 80-90sqft/lt/2coats
( depending on application method, nature of surface,
film thickness and colourshade )
Recommended use : Recommended for exterior walls , concrete plaster.
Flash Point : Non-flammable as it is a water based product
Stability of thinned paint : Use within 24 hours
Shelf life : 2 years from date of manufacturing in unopened containers
kept in cool, dry place away from sunlight.
Areas where Anti Carb Primer may be applied onplasters, concrete and other masonry surfaces. The
masonry surfaces should fully cured, dry and free from loose materials.
Surface Preparation Remove paint, dirt, loose particles from the surface to be painted using wire mesh. Fill
up minor cracks with crack-seal putty. Cracks which are larger than 5mm have to be filled with cement
work. Let it dry completely. Check moisture content of the substrate. It should be below 12% for superior
performance of the primer.
Can be applied with Spray, brush or roller after suitable dilution
Thinning : Dilute 1 lt of primer with upto1lt of water depending on required consistency.
16. AMPUS® Anti-Carb has been formulated to confer long term protective and decorative properties to concrete and
masonry surfaces. The micro-porous structure of the coating acts as a barrier to the ingress of Chlorides and
Carbon Dioxide and other acid gases, but allows the passage of water vapour from the substrate. The elastomeric
nature of Anti-Carb ensures good crack bridging properties, in case of structural movement.
Where new and existing concrete and masonry structures require protection from Water, Carbon Dioxide, Sulphur
Dioxide, Oxides of Nitrogen, Chlorides, Sulphates and UV radiation. Examples: car parks, commercial and industrial
buildings, bridges, subways, high rise flats, roofing.
Easy to clean
Excellent UV and weathering
resistance
Single pack and easy to apply
Protects substrates from
carbonation
Highly resistant to freeze/thaw
cycling
Elastic nature with crack
bridging properties
Allows structure to ‘breathe’
Water based and non-toxic
Range of colours available
(to BS4800 or RAL standards)
: Eggshell
Anti-Carb is supplied in 20L packs
Surface Preparation
Substrates shall be clean, sound and
free from contaminants such as oil,
grease, moss, algae, dust and any
existing loose or flaking paintwork.
Concrete surfaces shall be fully cured
and free from laitance, mould release
oils and curing compounds. Mould or
algae shall be removed with a
proprietary fungicidal wash.
High pressure water jetting may be
deemed necessary for heavily
contaminated surfaces. Blow holes or
pitting on the surface shall be filled
using Surfacer.
Priming is recommended on
porous substrates. Use AMPUS®
Anti-Carb Primer for priming the
substrates apply by brush, roller
or airless spray at a nominal rate
of 6-8m²/litre and allow to dry.
Apply Anti-Carb coating by brush,
roller or airless spray at a
nominal rate and allow to dry. A
second coat may be subsequently
applied at the same rate.
3.5 - 5.5m² / litre / coat
(2 coats recommended)
Anti-Carb will be
Touch dry following 1 - 3
hours
Through dry: 2-16 hours
Over(dependent on
ventilation).
Coating interval: 16 hours
minimum
Tensile strength: 3.7 MPa @
20°C Carbon Dioxide
Diffusion
Coefficient: 965,000
Equivalent air thickness, R:
>200m @ 300 microns dft.
Water vapour transmission
rate: 12g/m²/day
Service temperatures: -30°C
to + 80°C
Elongation at break: 350% @
20°C
Coverage : Anti-Carb may be
applied at a nominal rate of
5m²/litre/coat.
Volume Solids: 56%
Wet film thickness: 180
microns per coat .
Equivalent dry film thickness:
100 microns per coat.
Clean equipment with water or a
mixture of water and Tool clean
prior to drying of the coating.
Store in dry conditions, out of direct
sunlight, at temperatures between 10°C
and 25°C. Protect from frost. Anti-Carb
has a minimum shelf life of 12 months
when stored in original, unopened
containers in accordance with our’s
instructions.
Do not apply at temperatures of 3°C or
less or if there is a risk of frost.
Compatibility testing of Anti-Carb with
existing paint coatings must be carried
out prior to over coating.
White or Light Grey
(others colours are available on
request)
17. Drying Time :
Touch dry : 5 Minutes.
Finishing : Textured and super- Glossy
Solid by weight : 45/65%
Solid by Volume : 39/49%
Brush ability : Smooth & Uniform
Surface Preparation : All substrates must be clean and dry with no oils, silicones ,waxes or
other contaminants. Sand surfaces before application and remove all sanding residue. Bare
wood surfaces need to be first applied Ampus® Speaker Cabinet Putty followed by Ampus®
Speaker Cabinet Base Coat.
APPLICATION
o BY ROLLER: Apply roller grade by brush or roller to evenly coat the surface. A heavy
first coat followed by a lighter second coat will give milder texture. A heavy second
coat will produce a more aggressive texture. Adding a small amount of water to the
product will reduce the texture profile and can provide more of an orange peel texture.
o BY SPRAY : Apply spray grade by Hopper Gun, pressure pot or airless spray system in a
complete even coat to the entire surface to completely seal and protect the surface.
Once the base coat is dry, apply a spray texture coat by lowering the air back pressure.
Spray pressure will be dependent on the type of spray equipment being used. Test the
spray application technique first on a piece of cardboard and note the pressure settings
needed to accomplish the desired finish desired. Typical pressure pot base coat
application uses only 10 to 15# of fluid pressure and 30# of air pressure. Texturing uses
20# of fluid pressure and only 5-10# of air pressure.
Higher air pressure = smaller dots and vice versa.
Ampus® Speaker Cabinet Texture Coating is a high performance texture coating with tremendous
adhesion to wood and other substrates. It can be spray applied to create a tough, beautiful,
weather resistant & easily maintained surface.
Ampus® Speaker Cabinet Texture Coating was designed to provide beauty and protection to wood
speaker cabinets, road cases and other applications.
Ampus® Speaker Cabinet Texture Coating is a blend of high technical polymers & special
coalescent for creating high relief spatter textures. Ampus® Speaker Cabinet Texture Coating
requires no special primers and easily applies withHopper Gun, HVLP Pressure pot, brush or
textured roller. Available in Black, Spray or Roller Satin Finish & custom Colours.
18. Drying Time :
Touch dry : 5-7 Minutes.
Finishing : Smooth and partial- Glossy
Solid by weight : 55/75%
Solid by Volume : 49/59%
Brush ability : Smooth & Uniform
Surface Preparation : All substrates must be clean and dry with no oils, silicones ,waxes or
other contaminants. Sand surfaces before application and remove all sanding residue. Bare
wood surfaces need to be first applied Ampus® Speaker Cabinet Putty followed by Ampus®
Speaker Cabinet Base Coat.
APPLICATION
o BY ROLLER: Apply roller grade by brush or roller to evenly coat the surface . A smooth
coat to be applied evenly over the base in order to make it ready for texture coating
Ampus® Speaker Cabinet Base Coating was designed to provide a platform to your texture coats
for better finishes thereby increasing strength of adhesion between the two coats and making
wooden speaker cabinet more resistant moisture.
19. Ampus® Speaker Cabinet base putty is designed to give smooth finish to your
wooden cabinet thereby preventing wood to absorb the base or texture coat also
Ampus® Speaker Cabinet Base putty is essential providing extra layer on wood
and making it resistant to moisture and increasing life of wood.
Drying Time
Touch Dry : 10 minutes (depends on weather conditions)
Finishing : Smooth & Matt
Brush ability : Smooth & Uniform
Recommended use : Recommended for wooden planks and speaker cabinet
All loose paint, dust, dirt, & grease needs to be completely removed with stiff brush. Wash the surface
with clean water.
With the help of metallic blade take the putty and wipe in upward direction simultaneously maintaining
the desired thickness of coat and let it stay to dry
20. ACRYLIC WASHABLE DISTEMPER
CEMENT PAINT
WHITE CEMENT WALL PUTTY
EXTERIOR EMULSION PAINT
HI- GLOSS PREMIUM ENANMEL
PLASTIC EMULSION PAINT
SILK TOUCH
TEXTURE MATT
TEXTURE SMOOTH
WATER BASE CEMENT PRIMER
OIL PRIMERS
SPEAKERS CABINET PUTTY
SPEAKER CABINET BASE COATS
SPEAKER CABINET TEXTURE COAT
ANTI CARBONATION PRIMER
ANTI CARBONATION PAINT
21. Mfd. Of all kinds of Industrial & Decorative Paints
B-25, Sector 5, Dist. Gautam Budh Nagar, Noida (U.P) -201301
Mob : +91-9811-047-372; +91-9953-791-073; +91-8000-4000-20
Visit Us at :- www.indiancolourindustriesindia.com
E-Mail- info@indiancolourindustriesindia.com