HemaBlock powder is a kinetically charged blend that utilizes the unique Microporous Polysaccharide Bead (MPB) technology combined with micronized fibrils of re-absorbable oxidized cellulose, which complements the safety and efficacy of the active MPB technology for veterinary use.

1. STOP the bleed
www.hemablock.com
5-Step
R.A.P.I.D.
Application Procedure

2. STOP the bleed
1. Remove 2. Apply 3. Pressure 4. Irrigate 4. Delivered
excess blood. powder liberally
to the bleeders.
on wound site
for 1 to 2 minutes.
to visualize
hemostasis.
hemostasis.
5-Step
R.A.P.I.D.
Application Procedure

3. STOP the bleed
1. Remove
excess blood.
• Remove excess blood to easily
identify bleeders and allow
applying HemaBlock Powder
directly on the active bleeder.

4. STOP the bleed
2. Apply
powder liberally
to the bleeders.
• Apply plenty of HemaBlock
Powder on the bleeder. Be
sure to completely cover the
bleeding area.

5. STOP the bleed
3. Pressure
on wound site
for 1 to 2 minutes.
• Steady Pressure needs to
be applied to stop the flow
of the bleeders for
approximately 1 to 2
minutes to allow time for
HemaBlock Powder to
create the clot.

6. STOP the bleed
4. Irrigate
to visualize
hemostasis.
• Irrigate the wound area with
saline solution to remove
excess powder to check for
bleeders might have missed.

7. STOP the bleed
5. Delivered
hemostasis.
• Delivered hemostasis
(clotting) is evident after
irrigation and the wound site is
ready for traditional closure
methods.