1. Thanks for visiting my blog!!!!!
Your support is what keeps me going, I hope you have subscribed to the feed for free and you have
told your friends about the site.
Please always try to comment on the posts as only then I can understand what you need. Now, let
us jump into the action now shall we?
To install Psiloc IR Remote please follow the steps below:
1. First and foremost please sign 3.Crack.Unsigned.sis (see Signing help located here and here if you
need help)
2. Either of the signing process should work and you don’t need to do both of them if one works first time.
3. Install 1.irRemote.Setup.SIGNED.Do.Not.Resign.sis
4. Install 2.DRMCommonSolutions.SIGNED.Do.Not.Resign.sis
5. Finally install the signed 3.C-R-A-C-K.signed.sis file.
6. If you get an error with file number 2 then reboot your phone and try it again
7. At this point you are basically done installing Psiloc IR Remote in your phone!!! Yayyy!!!
Now comes the easiest part of getting all the codes for all the different types of electronics. If you
already have the codes from a different or older version of irremote then this is optional for you,
but for full featured entertainment, I will recommend you to complete it :
1. After successful installation with either of the above method, extract the database of codes.
2. Send the required remotes to your phone through any connectivity like irDA, Bluetooth or USB cable.
3. Now open LCG X-plore (can be found in my blog) or any other explorer.(Not the default file manager)
4. (i) For remote codes sent via irDA or Bluetooth, the remotes will be stored in your message inbox. So by
using LCG explore move (cut) the remote files in your inbox to "c:datacodes".If the folder "codes" is not
present in your C:data, then create it.
OR
(ii) For remote codes sent through USB cable, just open the LCG Xplore and point to the location of the file
and move it to "c:datacodes "
5.Make sure that you correctly moved the remote codes only to "c:datacodes "
6.Now exit the LCG Xplore. Open the File Manager(your defaut one), Goto phone memory and then open the
folder named "codes"
7.Open the remote file, now it will automatically opens your Psiloc irremote application and the new remote
will be added to your database.
Enjoy now will ya!!!!!
Like my blog? Then please consider subscribing to my feed and getting my posts via e-mail. I will never
ever spam!!!! Never did and never will and I am sure you know by now that no one will ever get your email
address from me no matter what. Cheers my good friends! 