1. MOLD&INDOORAIR
Q U A L I T YKNOW YOUR LIABILITY, UNDERSTAND YOUR EXPOSURE
WWW.VALUECLEAN.COM
2. When it comes to new home construction, few issues have garnered as much attention or concern over the past
15 years as mold. Not only has mold gained a reputation as a health and environmental threat, it has resulted in
millions of dollars of litigation between building and design companies and their customers.
Given today’s stringent code requirements, structures are built tighter than ever before. While good design and
construction practices are key to preventing construction defect claims, it is equally important to take precautions
to maintain a clean and safe level of indoor air quality throughout the build cycle.
Call Value Clean Industries during the construction process to evaluate and treat
fungal-related concerns BEFORE they become an issue.
3. RISK MANAGEM
MOISTURE INSPECTION OF
STRUCTURAL MATERIALS
COMPLETE SERVICE
PACKAGE AND BUILDER
DIRECT PRICING
MOISTURE INSPECTION OF
STRUCTURAL MATERIALS
Moisture meters are used
to ascertain the moisture
content of the installed or
stored lumber. Designated
areas are selected and
data is recorded to assess
the moisture condition in structural
materials.
As a general rule, lumber is considered
dry below 12 to 15 moisture content.
The potential for mold growth can
occur over 17 percent moisture content
with the right humidity conditions.
Moisture content over 20 percent
presents the potential for wood decay
growth and fungi.
DID YOU KNOW?
It’s important to note that
installation of drywall over 15
percent moisture content is the
leading cause of drywall cracks
found within a finished structure.
COMPLETE SERVICE
PACKAGE AND BUILDER
DIRECT PRICING
Our comprehensive
service package includes
moisture inspection of
structural materials, a
visual fungal inspection of
the structure and an antimicrobial
treatment of the lumber using a
safe and biodegradable chemical.
In addition we provide a certificate
and warranty to share with your
end consumer.
In addition, we have made the pricing
easy. Simply take the square footage
of the stucture and multiply it by your
negotiated supplier rate. For your
supplier rate, please contact us at
913.302.9639.
4. ENT SERVICE PACK AGE
VISUAL FUNGAL
INSPECTION OF THE
STRUCTURE
ANTIMICROBIAL
TREATMENT OF LUMBER
CERTIFICATION
AND WARRANTY
DOCUMENTATION
VISUAL FUNGAL
INSPECTION OF THE
STRUCTURE
At Value Clean, we
conduct a general visual
assessment of the
structure with regard to
fungal growth as seen
on affected lumber and develop
an estimate on how much of the
wood surfaces are affected. We
inspect the three or four accessible
sides of framing members and
determine the approximate fungal
coverage in percentage of the entire
surface area. We summarize the
overall affected surface area which
commonly varies from one to five
percent of the total fungal growth of
wood surfaces.
ANTIMICROBIAL
TREATMENT OF LUMBER
Value Clean provides
preventative treatments to
address the potential for
fungal growth or indoor air
quality issues throughout
the build cycle. Whether
you have an existing problem or
have concerns about potential
mold hazards while building, we
can treat the indoor structure. The
chemical treatment used is safe and
biodegradable and is also used as a:
■ Disinfectant
■ Sanitizer
■ Fungicide
■ Mildewstat
■ Virucide
■ Deodorizer
■ Bactericide
CERTIFICATION
AND WARRANTY
DOCUMENTATION
We provide a certificate
and warranty that you
can share with the end
consumer. This warranty
certifies the structure has
been inspected visually for fungal
growth, inspected to ensure the
moisture content within the home
has been dried to acceptable levels
prior to insulation and sheetrock, and
treated with antimicrobials to clean
and prevent fungal growth during
the build cycle. This certificate and
warranty is good for 180 days from
the date of inspection as long as
the structure has been dried with no
evidence of water intrusion, and the
structure will be temperature and
humidity controlled within 21 days
of service.
5. MOLD LITIGATION:
WHAT YOU NE E D TO KNOW
Design and construction firms are frequently threatened
with construction defect claims that involve mold and
environmental–related problems. Construction defect
claims can also include other claims for property
damage, delays, profit losses, interruption of business,
breach of contract, negligence or payment disputes.
In the last 15 years, there has been a tremendous
rise in fungal-related claims that have evolved into
class action lawsuits, where personal injury is
declared due to mold exposure and environmental
related problems.
Every year, more than a billion dollars are spent
in the United States on mold–related claims
or environmental hazards regarding indoor air
quality. Whether you are a designer, supplier,
architect, engineer, builder, business owner,
contractor or developer – all parties involved
in new home construction face the possibility
of being sued.
Your proactive risk management can prevent and
reduce the likelihood of mold or fungal-related
liability claims.
6. A LE ADE R IN
C L E A N I N G
RESTOR ATION
AN D R E M E DIATION
With a combined 30 years’ experience in the
restoration industry, we have the knowledge,
training, software and equipment to evaluate
and treat fungal-related concerns – giving
you and your clients peace of mind.
Our trained specialists are fully-certified
through the Institute of Inspection, Cleaning
and Restoration (IICRC), are Certified Mold
Remediators through the Professional Mold
Inspection Institute (PMII) and are also
certified in Microbial Contamination and
Remediation.
CALL
913.302.9639
FOR INFORMATION