Best Steam Cleaners For Facilities Management

1. Benefits of
Industrial
Steam
Cleaners in
Facilities
Management

2. The Power of Industrial
Steam Cleaners
u Industrial steam cleaners are advanced cleaning
machines that use the power of high-temperature
steam to tackle a wide range of cleaning tasks.
u The steam is produced by heating water to an
extremely high temperature, creating a pressurised
vapour that can effortlessly dissolve tough dirt, grease,
and grime.
u This exceptional cleaning method not only saves time
and effort but also eliminates the need for harsh
chemicals, making it an eco-friendly option for facilities
management.

3. Enhanced Cleaning Efficiency
u Traditional cleaning methods often require
repetitive scrubbing and wiping, which can
be labour-intensive and time-consuming.
u Industrial steam cleaners, on the other
hand, provide unmatched efficiency by
rapidly dissolving and loosening stubborn
dirt and stains.
u The high-temperature steam not only
cleans surfaces thoroughly but also
sanitises them, eliminating harmful bacteria
and pathogens.
u As a result, your cleaning staff can
accomplish more tasks in less time,
enhancing overall productivity.

4. Cost-Effectiveness
and Sustainability
u Industrial steam
cleaners contribute to
sustainability efforts by
reducing water consumption
and eliminating the need for
chemical cleaners.
u As a result, you can significantly
lower operational costs, as the
only resource required is water,
which is readily available and
inexpensive.
u Additionally, by minimising the
use of chemical cleaners, you
also reduce potential health
hazards for your employees and
occupants of the facility.

5. Versatility in
Cleaning
Applications
u These machines can be used on
various surfaces, including concrete,
tile, metal, and even carpets.
u They are effective in removing oil
stains, grease, grime, and even paint
residues.
u Moreover, with the right attachments
and nozzles, steam cleaners can
access hard-to-reach areas, making it
easier to maintain the cleanliness of
complex industrial equipment.
u This adaptability allows you to use a
single cleaning solution for a wide
range of tasks, streamlining your
cleaning process and reducing the
need for multiple cleaning tools.

6. Safety and
Hygiene
Assurance
In industrial facilities, safety and hygiene are of
paramount importance.
Slips and falls caused by slippery floors or
contaminated surfaces can pose a significant safety
risk.
By incorporating industrial steam cleaners into
your facilities management routine, you can ensure a
safer and healthier environment for your employees.
The high-temperature steam effectively kills bacteria
and other harmful microorganisms, reducing the risk of
cross-contamination and promoting a safer work
environment.

7. Extending Equipment Lifespan
u Industrial machinery and
equipment represent a
significant investment for any
facility. To protect this
investment, regular
maintenance and cleaning are
essential.
u Industrial steam cleaners play
a crucial role in preserving the
lifespan of your equipment by
effectively removing dirt and
debris that could otherwise
lead to premature wear and
tear.
u By keeping your equipment
clean, you can prevent
breakdowns and costly repairs,
ultimately saving money in the
long run.

8. Environmental Impact and
Regulatory Compliance
u As environmental awareness continues to grow, companies are under
increasing pressure to reduce their carbon footprint and comply with
environmental regulations.
u Industrial steam cleaners align perfectly with these sustainability goals.
u By eliminating the need for chemical cleaners and minimising water usage,
these machines help you reduce your facility’s environmental impact.
u Additionally, using steam cleaning demonstrates your commitment to
environmental responsibility, which can enhance your brand image and
reputation.

9. Improved Indoor
Air Quality
u Indoor air quality is a critical factor in
maintaining a healthy workspace.
u Dust, allergens, and pollutants can
accumulate in industrial facilities,
leading to respiratory issues and
allergies for occupants.
u Industrial steam cleaners can effectively
remove dirt and contaminants from
various surfaces, preventing them from
becoming airborne and improving
indoor air quality.
u This not only benefits the health and
well-being of your employees but also
enhances overall productivity and
reduces sick leaves.

10. Minimised
Disruption and
Downtime
u Facilities management often requires balancing
cleaning tasks with the regular operations of the
facility.
u Traditional cleaning methods, which may involve
wet floors or strong odours from chemical
cleaners, can cause disruptions and
inconvenience for employees and visitors.
u Industrial steam cleaners offer a clean and quick
solution, as they use minimal water and do not
require chemical additives.
u This means less downtime for cleaning, allowing
your facility to maintain its operations smoothly.

11. Simplified Training
and Ease of Use
u Implementing a new cleaning
method in your facilities
management routine can raise
concerns about employee training.
u Fortunately, industrial steam
cleaners are relatively easy to use,
and the training required is minimal.
u With straightforward operating
procedures, your cleaning staff can
quickly adapt to this efficient
cleaning method, reducing the
learning curve and ensuring a
seamless transition to steam
cleaning.

12. Conclusion
u Industrial steam cleaners have proven to be a game-changer in facilities
management.
u Their remarkable efficiency, cost-effectiveness, versatility, and positive impact
on safety and sustainability make them indispensable tools for any industrial
facility.
u By incorporating industrial steam cleaners into your cleaning routine, you can
experience a cleaner and safer working environment, extend the lifespan of
your equipment, and align your facility with eco-friendly practices.

13. FAQs

14. 1. How often
should
industrial
steam cleaners
be used in
facilities
management?
The frequency of using industrial steam
cleaners depends on the specific needs
and size of the facility. Generally, it is
recommended to incorporate steam
cleaning into your regular cleaning
routine, depending on the level of dirt
and grime build-up. For high-traffic areas
or equipment that requires frequent
cleaning, using steam cleaners daily or
weekly may be necessary.

15. 2. Can
industrial
steam cleaners
replace all
other cleaning
methods?
While industrial steam cleaners are highly
effective, they may not entirely replace all
other cleaning methods. For specific
tasks or delicate surfaces, other cleaning
techniques may still be required.
However, the versatility of steam cleaners
allows them to handle a wide range of
cleaning applications, reducing the need
for multiple cleaning tools.

16. 3. Are
industrial
steam cleaners
safe for all
surfaces?
Industrial steam cleaners are generally
safe for most surfaces, including
concrete, metal, tile, and carpets.
However, it is essential to check the
manufacturer’s guidelines and
recommendations for specific surfaces to
ensure that steam cleaning will not cause
any damage.

17. 4. Can industrial
steam cleaners
be used in food
processing
facilities?
Yes, industrial steam cleaners are
commonly used in food processing
facilities due to their sanitising
capabilities. They provide an effective and
chemical-free way to maintain a hygienic
environment, ensuring compliance with
food safety regulations.

18. 5. Are industrial
steam cleaners
suitable for
small facilities?
Industrial steam cleaners are not limited
to large facilities; they can be used
effectively in smaller settings as well.
Their adaptability and efficiency make
them a valuable cleaning solution for
facilities of all sizes.

19. Contact us
Best Steam Cleaners For Facilities
Management
Check out our website to see the…
Feel free to…
https://puresteamcleaners.uk/best-steam-cleaners-for-facilities-management/
Tel: 01903 755128
Email:
sales@puresteamcleaners.uk