The document describes vehicle specific console boxes and accessories manufactured by Gamber-Johnson for various police vehicle models. It provides details on console boxes for the Chevrolet Caprice, Dodge Charger, Chevrolet Tahoe/Silverado, Ford Utility and Sedan Police Interceptors. The consoles are low-profile, no-drill solutions that house equipment and include mounting space and accessories like armrests and filler panels. Additional generic accessories like pockets, lighting and power solutions are also described.

1. L A W E N F O R C E M E N T P R O D U C T S
Vehicle Specific Consoles
Console Accessories
3
3

2. The Chevrolet Caprice vehicle specific console box is a low
profile, no-drill solution designed specifically for the Police
Pursuit Vehicle (PPV) vehicle. The box attaches directly to the
vehicle without the need to order a separate top plate. Using
the four OEM fasteners, installing the console box is quick and
easy.
The horizontal, low profile section of the console box
is designed to house remote control head devices and
accessories, accommodates 2 to 4 devices (14.5”of mounting
space) without the internal cupholder or 1 to 2 devices
(10.0”of mounting space) with an internal cupholder,
and has a consistent mounting space depth of 4.28”. The
vertical, angled section of the console box is designed to
accommodate 1 full sized device with 3.0”of mounting space.
The console box can be used with the passenger side
vehicle base (Item No. 7160-0532). A trunk shelf can also be
purchased (Item No. 7160-0380).
2014-2015 Chevrolet Caprice
7160-0521-00
Console Box Only
7160-0521-01
Console Box, Internal Cupholder, Armrest
Gamber-Johnson is a leading manufacturer of rugged mounting solutions
for public safety equipment. Our vehicle specific console solutions do
more than hold your radios – from the bottom up, they are designed,
engineered and tested to keep you safe, comfortable, and make life easier.
Our fully welded console box comes assembled; making is easier and faster
to install. The vertical, angled section of our consoles has the additional
depth required to mount full sized radios, while the horizontal, low profile
section is designed to allow the officer the ability to exit the vehicle from the
passenger side in an emergency situation.
Each console box comes standard with three faceplates and three filler
panels of your choosing. Our unique hold downs on the sides of the console
box create a clean finish that won’t tear the officer’s uniform sleeve. Two
screws on each hold down make it quick and easy for installation and
maintenance work.
The computer can be center mounted on top of each console box in
different two locations: on the“smiley face pattern”to off-set it towards
passenger or on the 3-bolt pattern closer to the driver for easy articulation.
Mounting the computer in the center eliminates the need for a passenger
side vehicle base. We test all of our products to ensure they function
flawlessly in the most rugged environments and back our console solutions
with a limited lifetime warranty.
Vehicle Specific Console Boxes

3. The Dodge Charger vehicle specific console box is a low profile, no-drill solution
designed specifically for the Police Pursuit Package. The box attaches directly to the
vehicle without the need to order a separate top plate. Using the six OEM fasteners,
installing the console box is quick and easy. Molded dash filler panels are included
which gives the console a sleek appearance that blends in with the car’s aesthetics.
The horizontal, low profile section of the console box is designed to house
remote control head devices and accessories, accommodates 4 to 6 devices (13.5”of
mounting space) without the internal cupholder or 1 to 2 devices (9.0”of mounting
space) with an internal cupholder, and has a range mounting space depth of 3.6”to
5.67”due to vehicle sensor locations. The vertical, angled section of the console
box is designed to accommodate 1 to 2 full sized devices with 7.5”of mounting
space.
The console box can be used with the passenger side vehicle base (Item No.
7160-0329). A trunk shelf can also be purchased (Item No. 7160-0336).
2011-2016 Dodge Charger
7160-0326
Console Box Only
7160-0327
Console Box, Internal Cupholder, Armrest
The Chevrolet Tahoe/Silverado vehicle specific console box is a low profile, no-drill
solution designed specifically for the 2015 Tahoe PPV, 2014-2015 Silverado 1500 and
the 2015 Silverado 2500/3500/HD vehicles. The box attaches directly to the vehicle
without the need to order a separate top plate. A vehicle leg kit is provided with the
console to secure the console box to the vehicle.
The horizontal, low profile section of the console box is designed to house full sized
devices and accessories, accommodates 4 to 6 devices (11.5”of mounting space)
without the internal cupholder or 2 to 4 devices (7.0”of mounting space) with an
internal cupholder, and has a consistent mounting space depth of 8.0”. The vertical,
angled section of the console box is designed to accommodate 1 to 2 full sized devices
with 7.5”of mounting space.
A wiring chase can be bolted onto the front of the console to cover/hide the wires for
a finished look and to provide an additional mounting platform for printers, shut down
timers or fuse blocks. The console box can be used with the passenger side vehicle
base (Item No. 7160-0510).
2015-2016 Chevrolet Tahoe
7160-0548-00
Console Box Only
7160-0548-01
Console Box, Internal
Cupholder, Armrest
7160-0548-02
Console Box and
Wiring Chase
7160-0548-03
Console Box, Internal Cupholder,
Armrest, Wiring Chase

4. The Ford Utility vehicle specific console box is a low profile,
no-drill solution designed specifically for the Utility Police
Interceptor. The box attaches directly to the vehicle without
the need to order a separate top plate. Using the six OEM
fasteners, installing the console box is quick and easy.
The horizontal, low profile section of the console box
is designed to house remote control head devices and
accessories, accommodates 4 to 6 devices (11.5”of mounting
space) without the internal cupholder or 1 to 2 devices (7.0”
of mounting space) with an internal cupholder, and has a
range mounting space depth of 4.13”to 6.56”due to vehicle
sensor locations. The vertical, angled section of the console
box is designed to accommodate 1 to 2 full sized devices
with 7.5”of mounting space.
The console box can be used with the passenger side
vehicle base (Item No. 7160-0350).
2012-2016 Ford Utility Police Interceptor
7160-0412
Console Box Only
7160-0411
Console Box, Internal Cupholder, Armrest
The Ford Sedan vehicle specific console box is a low profile, no-drill solution
designed specifically for the Sedan Police Interceptor. The box attaches
directly to the vehicle without the need to order a separate top plate. Using
the six OEM fasteners, installing the console box is quick and easy.
The horizontal, low profile section of the console box is designed to
house remote control head devices and accessories, accommodates 4 to 6
devices (11.5”of mounting space) without the internal cupholder or 1 to 2
devices (7.0”of mounting space) with an internal cupholder, and has a range
mounting space depth of 4.13”to 6.56”due to vehicle sensor locations. The
vertical, angled section of the console box is designed to accommodate 1 to
2 full sized devices with 7.5”of mounting space.
The console box can be used with the passenger side vehicle base (Item No.
7160-0350). A trunk shelf can also be purchased (Item No. 7160-0438).
2012-2016 Ford Sedan Police Interceptor
7160-0410
Console Box Only
7160-0409
Console Box, Internal Cupholder, Armrest

5. 7110-0998
Passenger Armrest
7160-0429
Exterior Armrest
Vehicle Specific Accessories:
Chevrolet Caprice
7160-0430
Brother Printer Armrest
7160-0524
Break Away Armrest
Chevrolet Tahoe
7110-1012
Passenger Armrest
7160-0429
Exterior Armrest
7160-0430
Brother Printer Armrest
7160-0524
Break Away Armrest
Dodge Charger
14422
USB/Audio/Cigarette
Filler Panel
7160-0429
Exterior Armrest
7160-0430
Brother Printer Armrest
7160-0524
Break Away Armrest
Ford Sedan Police Interceptor
7160-0444
Wiring Cover Plate
For use with Sedan and Utility PI
7160-0429
Exterior Armrest
7160-0430
Brother Printer Armrest
7160-0524
Break Away Armrest
Ford Utility Police Interceptor
7160-0464
Side Storage Pocket
7160-0431
USB/Audio/Cigarette Filler Panel & Cables
7160-0429
Exterior Armrest
7160-0430
Brother Printer Armrest
7160-0524
Break Away Armrest
7120-1201
Tahoe Side Wing Panels (for use
with 7160-0548-00 and 7160-0548-01)
15250
USB/MP3/SD/
12 Volt Filler Panel
MCS-CUPHOLD2
Exterior Universal
Cupholder

6. Your Local Gamber-Johnson Reseller:
General Accessories:
Follow us on:
3130-0361
Cigarette
Knockout Filler
Panel
7160-0063
Cigarette Lighter
Adapter Kit
15082
Rocker Switch/
USB/Cigarette
Filler Panel
15083
Rocker Switch/
USB Port Filler
Panel
Rocker Switches
See website for
available switches
15371
Dual USB Power
Ports
Power
Distribution
Blocks - See
website for options
7160-0100
Side Mounted
LED Task Light
MCS-EPICMIC
Rail Mounted
Microphone Clip
MCS-MICPLT
Microphone Clip
Panel
MCS-INTCUP
Internal Mounted
Cupholder
MCS-POCKET3
Tall Interior
Pocket
7160-0332
Short Interior
Pocket
7160-0388
Tall Locking
Interior Pocket
7160-0389
Short Locking
Interior Pocket
7160-0375
Extended Panel
Armrest
Blank Filler
Panels
See website for
complete list
Full Faceplates
See website for
complete list
2-piece Faceplates
See website for
complete list
MNSTAR Wiring
Harnesses
See website for
complete list
Gamber-Johnson LLC
3001 Borham Ave., Stevens Point, WI 54481
Phone: 888.515.0069
email: gamberj@gamberjohnson.com
www.gamberjohnson.com