1. VISIÓN SENSOR for Inkjet Cable Marking
Application project.
Printed verification code.
Keyence is a trademark
KBA-Metronic is a trademark
Images property of KBA-Metronic (*)
Images property of KEYENCE (**)
KBA-Metronic GmbH seller for Spain is Impryma
Keyence seller for Spain is BITMAKERS
Andres Martos (c) 2013

2. Keyence IV visión sensor for cable marking
Control of missing prints for cable industry
•Direct plug on AlphaJet EVO,
•Trigger signal out, status out.
•Power Supply from AJ EVO
•Signal beacon included on AJ EVO
•Monitor screen optional
•Non expensive aplication. MkI /II
Andres Martos © 2013

3. Vision Sensor application MKI // Basic option
•24 volts DC from AJD
•Trigger from AJD
•Beacon activation signal •Basic detection system for printing errors
•Connection with terminal / monitor •Not Print Detection
•Programming adjustment terminal •Phasing failure detection
monitor •Uncontrolled motion detection
•Encoder signal for synchronization
Andres Martos © 2013

4. Vision Sensor application MKII // Double Print System
•Exclusive system for printing
error detection
•Not Print Detection
•Phasing failure detection
•Uncontrolled motion detection
•Intelligent change inkjet system
d
•Non stop printing utility
•Integrated
•Anomalies can manage without
stopping the printing and
production line.
Andres Martos © 2013

5. Vision Sensor application MKIII // Double Print System
•Complex CV system for
printing error detection
•Not Print Detection
•Phase failure detection
•Uncontrolled motion detection
•Intelligent change inkjet system
•Non stop printing utility
Integrated
•Anomalies can manage
without stopping the printing
and production line.
•Rapport /log on distance/time
job order option.
•Multi cam posibility for
multiple check points on print.
•OCR function
Andres Martos © 2013

6. Technical Data AlphaJet EVO CIJ
Housing: stainless steel
Display: 10,4" TFT-Touchscreen
Display 800 x 600 px with user-friendly interface
Protection class: IP 65
Weight: 31 kgs
Dimensions control unit: 700 x 320 x 320 mm
Dimensions print head: 145 x 40 x 40 mm
Print heads: 1
Connected loads: 110/230 V +/- 10%
Operating temperature: 5° bis 45° C
Relative air humidity max.: 90%, not-condensing
Compressed air required: No
Interfaces: internal Ethernet, 2 x RS 232,
2 x parallel inputs (product sensor, encoder)
Remote-socket, digital I/0 port, USB-connection
Alarmrelais: Yes
Ink system: 1.000 ml
Solvent recovery system: Yes
Print head excess pressure term.: Yes
Print head clearance: 1 - 25 mmType height:0,8 - 15 mm Print lines:8 (5 x 5 Matix)
Print speed: up to 2.800 characters/sec. Print resolution:up to 48 Pixel
Andres Martos © 2013

7. Dimensions KEYENCE IV series Vision Sensor
Andres Martos © 2013