SOTA Dental is a multilingual team specializing in dental implants and All-on-4 procedures.

1. What is an All-on-4 in Mexico?
What is an All-on-4 in Mexico? An all-on-4 is a procedure that allows
patients to have a complete denture with only 4 implants placed in their
jaw. The objective of this technique is to restore the patient’s
mouth with a method that is safer for their health, easier to treat, and
cheaper to afford. Our specialty at SOTA Dental is the all-on-4.
This procedure was created by Professor Paulo Malo and the dental
implant brand, Nobel Biocare. By strategically placing 4 implants you can
achieve a beautiful smile, proper chewing, and proper nutrition. It is easy
to see why this revolutionary procedure quickly took over the market.
This procedure is also known as the all-on-x. The x stands for the
number of implants, which could be 4, 5, 6, or even 8 implants. The
amount of implants required depends on the structure and health of the
patient’s bone within their jaw. Different denture materials have different
weights, therefore the material used is also a factor to consider. all-on-4
los algodones
The parts of an All-on-4 are:
Implants: Implants are little titanium screws that are placed in
your jawbone. There are commonly 4 implants in this
procedure. They are the anchor points for the denture.
Abutments: Abutments are small metal connectors that are
placed between the implants and the denture.
Temporary Denture: A temporary denture is a custom-made
prosthesis that patients use while their implants heal and
osseointegration happens. The dentist will replace this denture
in the final visit with the final prosthesis.
Final Denture: The final denture is made to perfectly fit your
mouth and match your bite. The dentist will place this denture
at the end of the treatment. It can last a lifetime with proper
care.

2. What are the advantages of an All-on-4 procedure?
Currently, a full-mouth restoration can only be done in a few ways. When
a patient is missing most of their teeth or perhaps all of them, the all-on-4
could be an option.
Before the existence of the all-on-4 procedure, dentists would use
multiple implants and bridges throughout a patient’s mouth to achieve the
same result. With an all-on-4, strategically placing implants across your
mouth avoids doing an implant for every single missing tooth.
It is created from one solid piece and requires a reduced number of
implants. That means reduced costs, improved healing time, better bite
stability, and fewer complications.
All patients are different and all dentists have different opinions. That is
why you should always check with your dentist what is the best option for
you.
Check out our before and after photo gallery to see our patients who had
this life-changing procedure.
Am I a candidate for the All-on-4?
In order to be a candidate for the all-on-4, you need to be a good
candidate for dental implants. Most people that are missing teeth are
good candidates. However, there are a couple
of absolute contraindications to keep in mind. For example, people that
have recently suffered a heart attack should avoid getting this
surgery. Also, people that have:
Uncontrolled diabetes
Bleeding issues

3. Biphosphonates therapy
Radiotherapies for cancer treatment
Having an all-on-4 is a big decision. It requires removing all of your teeth.
(top or bottom arch). This is why most dentists try to save as many
natural teeth as possible. Even if you wanted to have this procedure done
on yourself, it is best to let your dentist decide if you are a candidate for
the all-on-4 or not.
How is the All-on-4 procedure done in Mexico?
The all-on-4 procedure is a surgical oral rehabilitation, hence, it will take
a couple of visits to the dentist. The whole procedure might last anywhere
from 4 to 12 months depending on the case’s complexity. The result is a
new life with a beautiful smile.
In the initial visit, our doctors will examine the patient’s mouth. They will
look at their medical records and take the necessary x-rays and/or CBCT
scans. The purpose of this is to have enough information to determine if
the patient is a good candidate for the procedure. The doctor will also
consider their medical conditions that might require extra steps in the
process.
If our doctors find you to be a good candidate for the All-on-X and you opt
to continue with the treatment, then the surgery takes place. Our
doctors will first take measurements and impressions of the patient’s
mouth.
Next, the patient will be sedated and the remaining teeth removed. The
dentist will then cut incisions to expose the jawbone and drill holes with a
pilot drill.
The implants will then be placed. In the all-on-4 procedure, most of the
time the doctors will place the implants in the frontal area at a 90° angle,
and the ones in the back area at 45°. This serves two purposes, it gives
more stability to
the denture as well as prevents damaging the nerve that is in the back of
the jawbone.

4. The doctor will close the incisions once the implants are in the right
position. At this point, a temporary denture will be provided for day-to-day
use.
What is a Temporary Denture?
Temporary dentures come in 2 types, fixed or removable. Fixed
temporary dentures (or same-day teeth) are provided when all implants
have good torque in the bone. Removable ones sit on top of the implants
in order to ensure the integrity of the implant. The doctor will decide what
is best for any patient, but patients usually prefer fixed teeth because it
feels more like their natural teeth.
After the surgery, the patient will need to take extra care of their mouth
for a couple of months. They must wait until the osseointegration is
complete and their body has accepted the implants. The osseointegration
phase can take anywhere from 3 to 6 months.
Once the patient’s mouth has healed, a second visit will be required to
take new measurements and impressions of the mouth. After this, the
final denture will be created using the material that you and your doctor
chose. Sometimes a third visit is required to test the final prosthesis.
How long is the All-on-4 process in Mexico?
The all-on-4 process is different for every person. Treatment times
depend on a lot of factors, such as the quality of the patient’s bone, their
general health or pre-existing conditions, how well the body accepts the
implants, the complexity of the case, etc. You can expect to visit your
dentist at least two times.
The healing process can take anywhere between 3 to 6
months depending on everything mentioned above. Take into
consideration that extra steps like bones graphs of sinus lifts will make
this entire process longer.
We have a great video with Dr. Nestor talking about this procedure.
Please watch the video below for an in-depth explanation.
How much does an All-on-4 in Mexico cost?

5. When you begin to look for information about the cost of an all-on-4, you
will find that prices are all over the place.
There are many factors that change the price of dental implants. For an
in-depth understanding of the cost of an all-on-4 in Mexico visit this link.
Here is a list of things that could influence the price of an all-on-4 in
Mexico:
Implant brand & material
Prosthesis brand & material
Surgical fees
Anesthesia
Extra procedures
X-rays and scans
Medications
In the United States, you can expect to pay an average of $25,000 –
$40,000 USD per arch. That means nearly $50,000 – $80,000 USD for a
full-mouth restoration!. These outrageous costs are why so many people
look for all-on-4 procedures outside of the United States.
If you look for dental implants or all-on-4s in Mexico, you can save up to
60% of the total cost of your treatment compared to the United States. If
you want more information about the prices of dental implants in Mexico,
please check our special offers and prices page here.
A properly done all-on-4 can last a very long time with proper
care. Brushing, rinsing, cleaning, and general care are important habits
for an all-on-4 patient. Furthermore, implant longevity depends on several
other factors like:
Oral habits – How do you take care of your teeth? Do you
follow the oral health guidelines like flossing?

6. Implant brands – Implants brand manufacturers use different
materials which determine the longevity of the product.
Implant placement – Is the area around the implant placement
healthy?
General health – Are you someone who is sick all the time? Do
you take care of your health?
Lifestyle – Do you smoke a lot? Do you drink a lot? Do you play
any extreme sports?
Teeth Usage – Do you eat tough foods often?
Always ask your dentist how to take the best care of your prosthesis.
What material options do I have for an All-on-4 in Mexico?
There are many different types of materials on the market. Different
doctors work with different brands and materials. It is a good idea to
ask your dentist for their top choice regarding brands and inquire more
about it.
Here at SOTA Dental, we use 4 primary materials:
Acrylic – $
Pros: Easily repairable, affordable, and upgradable.
Cons: Not as aesthetic or durable as other options, picks
up odors if not treated with proper care.
PMMA – $
Pros: This material is milled from a single block, making it
more consistent and resistant than acrylic.
Cons: More expensive than acrylic.
Zirconia – $
Pros: One of the strongest and hardest materials on the
market. More durable than acrylic and PMMA. Highly
aesthetic.

7. Cons: Very heavy. More expensive. Could require more
implants.
Nano Ceramic – $
Pros: Highly aesthetic. High translucency. Good flexibility.
Lightweight. Easily repairable. Similar to natural teeth.
Cons: More expensive. Not all doctors offer this material.
If you decide to go with one of the cheaper options, you can always
upgrade your prosthesis in the future. It is just a matter of taking your
denture out, scanning it, and milling the new one.
Does an All-on-4 procedure hurt?
Many people have the misconception that this procedure is very
painful. The procedure is painless because our doctors use strong local
anesthesia or general anesthesia. You will not feel any pain because you
will be sedated or highly numbed in your gums. You may however start to
feel discomfort and pain once the numbness disappears.
Even though the all-on-4 procedure is considered to be safe, it is still a
surgery that will generate temporal trauma to your gums and bone. Take
into consideration that the recovery time will vary from patient to patient.
Always discuss with your doctor how to take proper care of your
prosthesis to avoid future complications.
Our professional team is here to help guide you through the entire
process.
What will happen if my All-on-4 prosthesis breaks?
Although a well-made prosthesis rarely breaks, it can happen. To prevent
this from happening the patient needs to be careful with what they are
eating. Wearing a nightguard is also important.
The dentist, in the office, can fix simple fractures of materials like acrylic

8. or nano-ceramic, however, zirconia is more complex to repair.
Consult with your dentist to find the best solution for you.
How to get an All-on-4 in Mexico with SOTA Dental?
At SOTA Dental, we specialize in the all-on-4. We perform this procedure
more than any other. We are glad to have been able to help so many
people by improving their smiles. Of all the things our team has
accomplished over the years, giving people their smiles back has fulfilled
us the most. Visit our Before & After photo gallery to see our patients’
beautiful smiles.
If you want to take a look at our prices and specials, click here. Visit our
article, “How much do dental implants cost”, if you want to understand
our prices in comparison with the United States and Canada.
To get started with SOTA Dental, please fill out our Patient Form. By
doing this, our doctors will review your case and send you a personalized
treatment plan.
We highly recommend you visit our Video Library for an extensive array
of useful videos. There you will meet our doctors who will explain
procedures, treatments, timelines, and more.