1. The document provides step-by-step instructions for disassembling and assembling the torque converter of a 962G wheel loader.
2. It describes removing over 40 individual components in 38 steps, and installing them in reverse order over 29 steps.
3. Key components that must be removed include the transmission oil pump, torque converter speed sensor, various bolts and gears, and the turbine assembly, and reinstalled in the proper orientation.
This document provides instructions for disassembling and assembling the torque converter of a 962G wheel loader. It describes 40 steps to disassemble the various components of the torque converter including the housing, pump, gears, shafts, bearings and seals. It then describes 28 steps for reassembling the components in reverse order, noting the proper alignment and torque specifications for each fastener. Tools required include link brackets, eyebolts and retaining ring pliers.
This document provides assembly instructions for a torque converter in a 962G wheel loader. It outlines 40 steps to disassemble the torque converter into its individual components and 29 steps to reassemble it. Key components that are removed and installed include the torque converter housing, various gears, bearings, seals, and fasteners. Special tools are required for tasks like removing retaining rings.
This document provides step-by-step instructions for disassembling and assembling the torque converter of a 962G wheel loader. It describes 40 steps for disassembly, removing components like the transmission oil pump, speed sensor, bolts, gears, shafts, bearings, seals, and housing. It then describes 18 steps for reassembly, showing how to install these same components in reverse order, like installing bearings, seals, gears, shafts, housing, and bolts, while applying loctite and torquing bolts to specifications. Tools required are also listed.
This document provides instructions for disassembling and assembling the torque converter of a 962G wheel loader. It describes 40 steps to disassemble the various components of the torque converter including the housing, pump, gears, shafts, bearings and seals. It then describes 28 steps for reassembling the components in reverse order, noting the proper alignment and torque specifications for the fasteners. Tools required include link brackets, eyebolts and retaining ring pliers.
Caterpillar cat 962 g wheel loader (prefix 6ew) service repair manual (6ew000...jfjkskefmsmem
This document provides instructions for disassembling and assembling the torque converter of a Caterpillar 962G wheel loader. It describes 40 steps to disassemble the torque converter by removing components like the transmission oil pump, speed sensor, bolts, gears, bearings, seals, and shafts. It then describes 28 steps for reassembling the torque converter by reversing the disassembly process and noting proper alignment of parts, use of threadlocker, and torque specifications for fasteners. The overall document provides very detailed technical instructions for taking apart and rebuilding the wheel loader's torque converter.
Caterpillar cat 962 g wheel loader (prefix 6ew) service repair manual (6ew000...ufjjjsekkemmd
This document provides instructions for disassembling and assembling the torque converter of a Caterpillar 962G wheel loader. It describes 40 steps to disassemble the torque converter by removing components like the transmission oil pump, speed sensor, bolts, gears, bearings, seals, and shafts. It then describes 28 steps for reassembling the torque converter by reversing the disassembly process and noting proper alignment of parts, use of threadlocker, and torque specifications for fasteners. The overall document is a service repair manual for maintenance technicians to service the machine's powertrain.
Caterpillar cat 962 g wheel loader (prefix 6ew) service repair manual (6ew000...fujsejfjksekkkm
1. The document provides step-by-step instructions for disassembling and assembling the torque converter of a 962G wheel loader.
2. It lists 39 steps for disassembly and 40 steps for assembly, showing illustrations and required tools for each step.
3. The steps include removing components like the transmission oil pump, torque converter speed sensor, bolts, gears, bearings, seals, and installing them in reverse order.
Caterpillar cat 962 g wheel loader (prefix 6ew) service repair manual (6ew000...fjjskekdmnsme
1. The document provides step-by-step instructions for disassembling and assembling the torque converter of a 962G wheel loader.
2. It lists 39 steps for disassembly and 40 steps for assembly, showing illustrations and required tools for each step.
3. The steps include removing components like the transmission oil pump, torque converter speed sensor, bolts, gears, bearings, seals, and installing them in reverse order.
This document provides instructions for disassembling and assembling the torque converter of a 962G wheel loader. It describes 40 steps to disassemble the various components of the torque converter including the housing, pump, gears, shafts, bearings and seals. It then describes 28 steps for reassembling the components in reverse order, noting the proper alignment and torque specifications for each fastener. Tools required include link brackets, eyebolts and retaining ring pliers.
This document provides assembly instructions for a torque converter in a 962G wheel loader. It outlines 40 steps to disassemble the torque converter into its individual components and 29 steps to reassemble it. Key components that are removed and installed include the torque converter housing, various gears, bearings, seals, and fasteners. Special tools are required for tasks like removing retaining rings.
This document provides step-by-step instructions for disassembling and assembling the torque converter of a 962G wheel loader. It describes 40 steps for disassembly, removing components like the transmission oil pump, speed sensor, bolts, gears, shafts, bearings, seals, and housing. It then describes 18 steps for reassembly, showing how to install these same components in reverse order, like installing bearings, seals, gears, shafts, housing, and bolts, while applying loctite and torquing bolts to specifications. Tools required are also listed.
This document provides instructions for disassembling and assembling the torque converter of a 962G wheel loader. It describes 40 steps to disassemble the various components of the torque converter including the housing, pump, gears, shafts, bearings and seals. It then describes 28 steps for reassembling the components in reverse order, noting the proper alignment and torque specifications for the fasteners. Tools required include link brackets, eyebolts and retaining ring pliers.
Caterpillar cat 962 g wheel loader (prefix 6ew) service repair manual (6ew000...jfjkskefmsmem
This document provides instructions for disassembling and assembling the torque converter of a Caterpillar 962G wheel loader. It describes 40 steps to disassemble the torque converter by removing components like the transmission oil pump, speed sensor, bolts, gears, bearings, seals, and shafts. It then describes 28 steps for reassembling the torque converter by reversing the disassembly process and noting proper alignment of parts, use of threadlocker, and torque specifications for fasteners. The overall document provides very detailed technical instructions for taking apart and rebuilding the wheel loader's torque converter.
Caterpillar cat 962 g wheel loader (prefix 6ew) service repair manual (6ew000...ufjjjsekkemmd
This document provides instructions for disassembling and assembling the torque converter of a Caterpillar 962G wheel loader. It describes 40 steps to disassemble the torque converter by removing components like the transmission oil pump, speed sensor, bolts, gears, bearings, seals, and shafts. It then describes 28 steps for reassembling the torque converter by reversing the disassembly process and noting proper alignment of parts, use of threadlocker, and torque specifications for fasteners. The overall document is a service repair manual for maintenance technicians to service the machine's powertrain.
Caterpillar cat 962 g wheel loader (prefix 6ew) service repair manual (6ew000...fujsejfjksekkkm
1. The document provides step-by-step instructions for disassembling and assembling the torque converter of a 962G wheel loader.
2. It lists 39 steps for disassembly and 40 steps for assembly, showing illustrations and required tools for each step.
3. The steps include removing components like the transmission oil pump, torque converter speed sensor, bolts, gears, bearings, seals, and installing them in reverse order.
Caterpillar cat 962 g wheel loader (prefix 6ew) service repair manual (6ew000...fjjskekdmnsme
1. The document provides step-by-step instructions for disassembling and assembling the torque converter of a 962G wheel loader.
2. It lists 39 steps for disassembly and 40 steps for assembly, showing illustrations and required tools for each step.
3. The steps include removing components like the transmission oil pump, torque converter speed sensor, bolts, gears, bearings, seals, and installing them in reverse order.
Nissan Forklift Electric P01 Series Service Repair Manual.pdf8sjkdkdmdmdm
This service manual provides maintenance and repair procedures for the NISSAN FORKLIFT P01 and P02 series. It consists of 14 sections covering general information, maintenance, control systems, batteries, electrical systems, motors, differentials, axles, brakes, steering, hydraulics, loading mechanisms, and the forklift body and frame. Technicians should follow the precautions outlined and use any technical bulletins issued by NISSAN together with this manual for repair reference. The manual is designed to enable safe and accurate service through detailed step-by-step instructions and specifications.
New Holland T8.435 696110769 CVT TIER 2 Tractor Service Repair Manual [ZERE08...8sjkdkdmdmdm
This document is a service manual for CNH Industrial tractor models T8.320, T8.350, T8.380, T8.410, and T8.435, and their SmartTrax variants, with continuously variable transmissions. The manual contains information on engine systems, power coupling, transmission, four-wheel drive systems, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and implements, steering, wheels, tracks, cab climate control, and electrical systems. It is intended to be used by qualified dealership personnel for repair and maintenance of the tractors.
New Holland T8.350 PST TIER 2 CHELNY Tractor Service Repair Manual [ZGRE05001...8sjkdkdmdmdm
This document is a service manual for CNH Industrial tractors that provides information on maintenance and repair for various tractor systems and components. It includes sections covering the engine, transmission, axles, hydraulics, steering, wheels, tracks, cab climate control, and electrical systems. The manual contains detailed descriptions and diagrams to assist technicians with repairs.
New Holland T8.350 PST TIER 2 Tractor Service Repair Manual [ZGRE05001- ].pdf8sjkdkdmdmdm
This document is a service manual for CNH Industrial T8 tractor models T8.320, T8.350, T8.380, and T8.410 with powershift transmissions from model years 2017 and above. It contains sections covering the engine, transmission, axles, hydraulics, electrical systems, and other components, providing repair and maintenance instructions. The manual is intended for use by qualified dealership technicians.
New Holland T6.180 STAGE IV Tractor Service Repair Manual.pdf8sjkdkdmdmdm
This document is a service manual that provides maintenance and repair information for various tractor models in the T6 series, including the T6.125, T6.145, T6.155, T6.165, T6.175, T6.160 and T6.180. The manual contains sections covering the engine, clutch, transmission, four-wheel drive system, front and rear axles, power take-off, brakes, hydraulics and other components. It includes detailed content on maintenance, troubleshooting and repair procedures for the components of the listed tractor models.
New Holland T6.175 STAGE IV Tractor Service Repair Manual.pdf8sjkdkdmdmdm
This service manual provides maintenance and repair information for Case IH T6 tractors models T6.125 through T6.180. The manual covers systems of the tractor such as the engine, transmission, axles, hydraulics, electrical systems, and more. Each system section includes detailed information on components, operation, and repair procedures.
New Holland 9030L Grape Harvester Service Repair Manual.pdf8sjkdkdmdmdm
This document is a service manual for the 9030L grape harvester. It contains sections covering the engine, hydrostatic drive, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, product feeding, residue handling, cleaning, secondary cleaning/destemming, crop storage/unloading, accessories, tools, and the platform, cab, bodywork, and decals of the harvester. It provides information on servicing and repairing components of the harvester.
JCB 530-110 and 530-120 Servo Options Telescopic Handler Service Repair Manua...8sjkdkdmdmdm
This document provides lubrication specifications and fluid capacities for various JCB machine models, including 525, 527, 530, 535 and 537 models. It lists recommended engine oils, transmission fluids, hydraulic fluids, greases and other lubricants. It also provides coolant mixture recommendations and notes that new engines do not require a break-in period and should be used immediately in normal work cycles.
This manual provides safety information and procedures for servicing a machine. It describes potential hazards, required safety equipment, and precautions to take when working on the machine. Key points include stopping the engine before maintenance, wearing protective gear, securing any raised components, and handling pressurized fluids and batteries with care. The manual structure is also outlined.
JCB 537-120 and 537-130 Telescopic Handler Service Repair Manual SN572900.pdf8sjkdkdmdmdm
This document provides lubrication specifications and fluid capacities for various JCB machine models, including 525, 527, 530, 535 and 537 models. It lists recommended engine oils, transmission fluids, hydraulic fluids, greases and other lubricants. It also provides coolant mixture recommendations and notes that new engines do not require a break-in period and should be used immediately in normal work cycles.
This document provides safety information and guidelines for engineers servicing machinery. It describes symbols used in the manual and outlines its structure. The first chapter covers safety precautions, including wearing protective equipment, preparing for emergencies, following safety rules, and taking care when working on or near moving parts. Maintaining a clean work area and stopping the engine before maintenance are also emphasized.
This document provides safety information and guidelines for engineers servicing machinery. It describes proper procedures for maintenance and repair. Engineers should follow all safety rules, wear protective equipment, secure hazardous areas, and stop the engine before performing any maintenance to avoid injury. The document emphasizes maintaining a clean work area and being aware of moving parts.
Takeuchi TL220 Track Loader Parts Catalogue Manual (Serial No. 222000001 and ...8sjkdkdmdmdm
This document provides parts information for a track-type tractor. It includes exploded diagrams and lists of parts for systems like the track rollers, idlers, adjusters, travel motor, belt, frame, arm stopper, hook, and operation levers. The parts are identified by number and include the part name, quantity, and references to other documents for service or ordering information.
This document provides safety precautions and instructions for maintenance personnel working on a crawler loader. It outlines general safety rules including wearing protective equipment, blocking the machine securely before working underneath, releasing hydraulic pressure, and disconnecting the battery. The document also provides cautions for disassembly and assembly such as cleaning parts, making matching marks, and replacing seals with new parts.
This document provides safety precautions for maintenance and repair of a crawler loader. It outlines general safety rules including wearing protective equipment, using the correct tools, blocking moving parts, and stopping the engine before performing maintenance. Specific precautions are given for working on hydraulic systems, moving heavy objects, and securing open compartments. Maintainers should carefully follow all safety instructions to avoid injury.
1. This manual provides procedures for maintenance and troubleshooting of the machine. Refer to it during daily work to improve service.
2. Directional terms like front, rear, left and right are defined. The machine serial number is included on the identification plate and should be included in reports.
3. Safety precautions that must be followed when working on the machine include wearing protective equipment, installing an extinguisher and first aid kit, stopping the engine before maintenance, and keeping clear of moving parts.
New Holland T8.410 PST TIER 2 Tractor Service Repair Manual [ZGRE05001- ].pdf8sjkdkdmdmdm
This document is a service manual for CNH Industrial T8 tractor models T8.320, T8.350, T8.380, and T8.410 with powershift transmissions (PST). It provides maintenance and repair instructions for the engine, transmission, axles, hydraulics, electrical systems, and other components. The manual is intended for use by qualified dealership personnel and includes safety warnings.
New Holland T8.380 PST TIER 2 Tractor Service Repair Manual [ZGRE05001- ].pdf8sjkdkdmdmdm
This document is a service manual for CNH Industrial T8 tractor models T8.320, T8.350, T8.380, and T8.410, including SmartTrax versions, with Powershift Transmissions (PST) and engine specifications. The manual contains information on maintenance and repair of the tractor's engine, transmission, axles, hydraulics, electrical systems, and other components. Sections cover specifications, maintenance procedures, troubleshooting, and replacement of parts.
New Holland T8.320 696110729 CVT TIER 2 Tractor Service Repair Manual [ZERE08...8sjkdkdmdmdm
This document is a service manual for CNH Industrial tractor models T8.320, T8.350, T8.380, T8.410, and T8.435, and their SmartTrax variants, with continuously variable transmissions. The manual contains information on engine systems, power coupling, transmission, four-wheel drive systems, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and implements, steering, wheels, tracks, cab climate control, and electrical systems. It is intended to be used by qualified dealership personnel for repair and maintenance of the tractors.
New Holland T8.380 696110749 CVT TIER 2 Tractor Service Repair Manual [ZERE08...8sjkdkdmdmdm
This document is a service manual that provides specifications and repair/maintenance procedures for various tractor models and components, including the engine, transmission, axles, hydraulics, steering, wheels, and tracks. It contains sections on the continuously variable transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and couplings, steering, wheels, and tracks. The manual is intended to guide service technicians in servicing and repairing components of the listed tractor models.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Nissan Forklift Electric P01 Series Service Repair Manual.pdf8sjkdkdmdmdm
This service manual provides maintenance and repair procedures for the NISSAN FORKLIFT P01 and P02 series. It consists of 14 sections covering general information, maintenance, control systems, batteries, electrical systems, motors, differentials, axles, brakes, steering, hydraulics, loading mechanisms, and the forklift body and frame. Technicians should follow the precautions outlined and use any technical bulletins issued by NISSAN together with this manual for repair reference. The manual is designed to enable safe and accurate service through detailed step-by-step instructions and specifications.
New Holland T8.435 696110769 CVT TIER 2 Tractor Service Repair Manual [ZERE08...8sjkdkdmdmdm
This document is a service manual for CNH Industrial tractor models T8.320, T8.350, T8.380, T8.410, and T8.435, and their SmartTrax variants, with continuously variable transmissions. The manual contains information on engine systems, power coupling, transmission, four-wheel drive systems, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and implements, steering, wheels, tracks, cab climate control, and electrical systems. It is intended to be used by qualified dealership personnel for repair and maintenance of the tractors.
New Holland T8.350 PST TIER 2 CHELNY Tractor Service Repair Manual [ZGRE05001...8sjkdkdmdmdm
This document is a service manual for CNH Industrial tractors that provides information on maintenance and repair for various tractor systems and components. It includes sections covering the engine, transmission, axles, hydraulics, steering, wheels, tracks, cab climate control, and electrical systems. The manual contains detailed descriptions and diagrams to assist technicians with repairs.
New Holland T8.350 PST TIER 2 Tractor Service Repair Manual [ZGRE05001- ].pdf8sjkdkdmdmdm
This document is a service manual for CNH Industrial T8 tractor models T8.320, T8.350, T8.380, and T8.410 with powershift transmissions from model years 2017 and above. It contains sections covering the engine, transmission, axles, hydraulics, electrical systems, and other components, providing repair and maintenance instructions. The manual is intended for use by qualified dealership technicians.
New Holland T6.180 STAGE IV Tractor Service Repair Manual.pdf8sjkdkdmdmdm
This document is a service manual that provides maintenance and repair information for various tractor models in the T6 series, including the T6.125, T6.145, T6.155, T6.165, T6.175, T6.160 and T6.180. The manual contains sections covering the engine, clutch, transmission, four-wheel drive system, front and rear axles, power take-off, brakes, hydraulics and other components. It includes detailed content on maintenance, troubleshooting and repair procedures for the components of the listed tractor models.
New Holland T6.175 STAGE IV Tractor Service Repair Manual.pdf8sjkdkdmdmdm
This service manual provides maintenance and repair information for Case IH T6 tractors models T6.125 through T6.180. The manual covers systems of the tractor such as the engine, transmission, axles, hydraulics, electrical systems, and more. Each system section includes detailed information on components, operation, and repair procedures.
New Holland 9030L Grape Harvester Service Repair Manual.pdf8sjkdkdmdmdm
This document is a service manual for the 9030L grape harvester. It contains sections covering the engine, hydrostatic drive, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, fruit harvester shaking, product feeding, residue handling, cleaning, secondary cleaning/destemming, crop storage/unloading, accessories, tools, and the platform, cab, bodywork, and decals of the harvester. It provides information on servicing and repairing components of the harvester.
JCB 530-110 and 530-120 Servo Options Telescopic Handler Service Repair Manua...8sjkdkdmdmdm
This document provides lubrication specifications and fluid capacities for various JCB machine models, including 525, 527, 530, 535 and 537 models. It lists recommended engine oils, transmission fluids, hydraulic fluids, greases and other lubricants. It also provides coolant mixture recommendations and notes that new engines do not require a break-in period and should be used immediately in normal work cycles.
This manual provides safety information and procedures for servicing a machine. It describes potential hazards, required safety equipment, and precautions to take when working on the machine. Key points include stopping the engine before maintenance, wearing protective gear, securing any raised components, and handling pressurized fluids and batteries with care. The manual structure is also outlined.
JCB 537-120 and 537-130 Telescopic Handler Service Repair Manual SN572900.pdf8sjkdkdmdmdm
This document provides lubrication specifications and fluid capacities for various JCB machine models, including 525, 527, 530, 535 and 537 models. It lists recommended engine oils, transmission fluids, hydraulic fluids, greases and other lubricants. It also provides coolant mixture recommendations and notes that new engines do not require a break-in period and should be used immediately in normal work cycles.
This document provides safety information and guidelines for engineers servicing machinery. It describes symbols used in the manual and outlines its structure. The first chapter covers safety precautions, including wearing protective equipment, preparing for emergencies, following safety rules, and taking care when working on or near moving parts. Maintaining a clean work area and stopping the engine before maintenance are also emphasized.
This document provides safety information and guidelines for engineers servicing machinery. It describes proper procedures for maintenance and repair. Engineers should follow all safety rules, wear protective equipment, secure hazardous areas, and stop the engine before performing any maintenance to avoid injury. The document emphasizes maintaining a clean work area and being aware of moving parts.
Takeuchi TL220 Track Loader Parts Catalogue Manual (Serial No. 222000001 and ...8sjkdkdmdmdm
This document provides parts information for a track-type tractor. It includes exploded diagrams and lists of parts for systems like the track rollers, idlers, adjusters, travel motor, belt, frame, arm stopper, hook, and operation levers. The parts are identified by number and include the part name, quantity, and references to other documents for service or ordering information.
This document provides safety precautions and instructions for maintenance personnel working on a crawler loader. It outlines general safety rules including wearing protective equipment, blocking the machine securely before working underneath, releasing hydraulic pressure, and disconnecting the battery. The document also provides cautions for disassembly and assembly such as cleaning parts, making matching marks, and replacing seals with new parts.
This document provides safety precautions for maintenance and repair of a crawler loader. It outlines general safety rules including wearing protective equipment, using the correct tools, blocking moving parts, and stopping the engine before performing maintenance. Specific precautions are given for working on hydraulic systems, moving heavy objects, and securing open compartments. Maintainers should carefully follow all safety instructions to avoid injury.
1. This manual provides procedures for maintenance and troubleshooting of the machine. Refer to it during daily work to improve service.
2. Directional terms like front, rear, left and right are defined. The machine serial number is included on the identification plate and should be included in reports.
3. Safety precautions that must be followed when working on the machine include wearing protective equipment, installing an extinguisher and first aid kit, stopping the engine before maintenance, and keeping clear of moving parts.
New Holland T8.410 PST TIER 2 Tractor Service Repair Manual [ZGRE05001- ].pdf8sjkdkdmdmdm
This document is a service manual for CNH Industrial T8 tractor models T8.320, T8.350, T8.380, and T8.410 with powershift transmissions (PST). It provides maintenance and repair instructions for the engine, transmission, axles, hydraulics, electrical systems, and other components. The manual is intended for use by qualified dealership personnel and includes safety warnings.
New Holland T8.380 PST TIER 2 Tractor Service Repair Manual [ZGRE05001- ].pdf8sjkdkdmdmdm
This document is a service manual for CNH Industrial T8 tractor models T8.320, T8.350, T8.380, and T8.410, including SmartTrax versions, with Powershift Transmissions (PST) and engine specifications. The manual contains information on maintenance and repair of the tractor's engine, transmission, axles, hydraulics, electrical systems, and other components. Sections cover specifications, maintenance procedures, troubleshooting, and replacement of parts.
New Holland T8.320 696110729 CVT TIER 2 Tractor Service Repair Manual [ZERE08...8sjkdkdmdmdm
This document is a service manual for CNH Industrial tractor models T8.320, T8.350, T8.380, T8.410, and T8.435, and their SmartTrax variants, with continuously variable transmissions. The manual contains information on engine systems, power coupling, transmission, four-wheel drive systems, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and implements, steering, wheels, tracks, cab climate control, and electrical systems. It is intended to be used by qualified dealership personnel for repair and maintenance of the tractors.
New Holland T8.380 696110749 CVT TIER 2 Tractor Service Repair Manual [ZERE08...8sjkdkdmdmdm
This document is a service manual that provides specifications and repair/maintenance procedures for various tractor models and components, including the engine, transmission, axles, hydraulics, steering, wheels, and tracks. It contains sections on the continuously variable transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and couplings, steering, wheels, and tracks. The manual is intended to guide service technicians in servicing and repairing components of the listed tractor models.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
2. Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 962G WHEEL LOADER 6EW
Configuration: 962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine
Disassembly and Assembly
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Media Number -SENR1381-10 Publication Date -01/10/2007 Date Updated -25/10/2007
i05754103
Torque Converter - Disassemble
SMCS - 3101-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 439-3940 Link Bracket 3
B 1P-7405 Eyebolt 2
C 2P-8312 Retaining Ring Pliers 1
Start By:
A. Separate the torque converter from the transmission and from the output gears. Refer to
Disassembly and Assembly, "Torque Converter from Transmission, Output Gears -
Separate".
1/13
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SEBP...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 1 g00319444
1. Use Tooling (A) and a suitable lifting device to place torque converter housing (1) onto
suitable cribbing, as shown.
Illustration 2 g00319445
2. Remove transmission oil pump (2) . Refer to Disassembly and Assembly, "Transmission Oil
Pump - Remove".
3. Remove bolt (3) and washer (4) .
Illustration 3 g00319447
4. Remove torque converter speed sensor (5) .
2/13
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SEBP...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 4 g00319448
5. Remove bolts (6) that hold the torque converter to the torque converter housing.
Illustration 5 g00319449
6. Remove bolts (7) and pump drive flange (8) .
Illustration 6 g00319450
7. Remove bolt (9) that holds shaft (10) to the torque converter housing.
3/13
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SEBP...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 7 g00319451
8. Install Tooling (B) in pump drive gear (11) .
9. Lift pump drive gear (11) and drive gear shaft (10) . Lift drive gear shaft (10) out of the
torque converter housing bore.
10. Place the assembly to one side of the torque converter housing bore. Make sure that drive
gear shaft (10) is not in the torque converter housing bore.
Illustration 8 g00319453
11. Remove Tooling (B) from pump drive gear (11) .
12. Remove drive gear shaft (10) from pump drive gear (11) .
13. Remove bearing (12) from pump drive gear (11) .
4/13
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SEBP...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 9 g03652939
14. Use Tooling (A) and a suitable lifting device to remove torque converter housing (1) . The
weight of torque converter housing (1) is approximately 113 kg (250 lb).
Illustration 10 g03652860
15. Turn torque converter housing (1) over to remove pump drive gear (11) .
Illustration 11 g00319455
5/13
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SEBP...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. 16. Remove drive gear (13) .
Illustration 12 g00319456
17. Remove retaining ring (14) that holds output shaft (15) .
18. Use a soft faced hammer in order to free the bearing from the carrier assembly. Remove
output shaft (15) from the carrier assembly.
Illustration 13 g00319500
19. Remove seal ring (16) from output shaft (15) .
20. Use a suitable press to remove roller bearing (17) .
6/13
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SEBP...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 14 g00319458
21. Remove bolts (18) . Remove torque converter impeller (19) from the impeller housing.
Note: If the torque converter is equipped with a freewheel stator, continue with Steps 22
through 28.
Illustration 15 g00877132
22. Turn impeller (20) to the opposite side.
23. Remove retaining ring (21) and spacer (22) from carrier shaft (23) .
24. Remove stator (24) .
7/13
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SEBP...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 16 g00877125
25. Remove retaining ring (25) and washer (26) from stator (24) . Repeat the procedure for the
opposite side of stator (24) .
Illustration 17 g00877126
Note: If necessary, Raise the temperature of the stator to a maximum temperature of 135 °C
(275 °F) for approximately 15 minutes.
26. Remove bearing race (27) , freewheel rollers (28) , freewheel springs (29) , and freewheel
cam (30) from stator (24) .
8/13
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SEBP...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 18 g00877129
27. Remove spacer (31) from impeller (20) .
Illustration 19 g00877133
28. Use a press to remove carrier shaft (23) from impeller (20) .
Illustration 20 g00877250
29. Remove bolts (32) and drive gear (33) from the torque converter impeller.
9/13
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SEBP...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 21 g00877257
30. Remove roller bearing (34) from torque converter impeller (19) .
Illustration 22 g00877258
31. Remove seal ring (36) from carrier assembly (35) .
32. If necessary, remove locating dowel (37) .
10/13
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SE...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 23 g01146281
33. Remove ring (39A) . Remove retaining ring (38) and impeller cover (39) from impeller
housing (40) .
Illustration 24 g00877261
34. Use Tooling (C) in order to remove retaining ring (41) .
Illustration 25 g00877262
35. Remove bearing spacer (42) .
36. Remove O-ring seal (43) .
11/13
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SE...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 26 g00877263
37. Turn the impeller housing onto the opposite side. Remove turbine assembly (44) .
Illustration 27 g00877264
38. Remove bolts (45) . Separate turbine (46) from turbine hub assembly (47) .
39. If necessary, remove locating dowel (48) .
Illustration 28 g00877265
12/13
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SE...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. 40. Remove roller bearing (49) from the impeller housing.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Mar 23 10:36:14 UTC+0800 2020
13/13
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SE...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 962G WHEEL LOADER 6EW
Configuration: 962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine
Disassembly and Assembly
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Media Number -SENR1381-10 Publication Date -01/10/2007 Date Updated -25/10/2007
i05754104
Torque Converter - Assemble
SMCS - 3101-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 439-3940 Link Bracket 3
B 1P-7405 Eyebolt 2
C 2P-8312 Pliers 1
D - Loctite 536 -
Illustration 1 g00877265
1/12
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SEBP...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Note: The notch on roller bearing (49) must be aligned with locating dowel (48) .
1. Install roller bearing (49) .
Illustration 2 g00877264
2. Install locating dowel (48) in turbine hub assembly (38) .
3. Install turbine hub assembly (47) to turbine (46) . Install bolts (45) . The torque for bolts
(45) is 60 ± 7 N·m (44 ± 5 lb ft).
Illustration 3 g00877263
4. Install the impeller housing over turbine assembly (44) , as shown.
2/12
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SEBP...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 4 g00877262
5. Install O-ring seal (43) .
6. Install bearing spacer (42) .
Illustration 5 g00877261
7. Use Tooling (C) in order to install retaining ring (41) .
Illustration 6 g01146281
3/12
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SEBP...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. 8. Install impeller cover (39) and retaining ring (38) in impeller housing (40) . Install ring
(39A) .
Illustration 7 g00877258
9. Install locating dowel (37) .
10. Install seal ring (36) on carrier assembly (35) .
Illustration 8 g00877257
Note: The notch in roller bearing (34) must be facing upward.
11. Install roller bearing (34) in torque converter impeller (19) .
4/12
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SEBP...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 9 g00877250
12. Install drive gear (33) and bolts (32) on the torque converter impeller. The torque for bolts
(32) is 105 ± 15 N·m (75 ± 11 lb ft).
Note: If the torque converter is equipped with a freewheel stator, continue with Steps 13
through 18.
Illustration 10 g00877133
13. Use a suitable press to install carrier shaft (23) in impeller (20) .
5/12
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SEBP...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 11 g00877129
14. Install spacer (31) on impeller (20) .
Illustration 12 g00877126
Note: If necessary, Raise the temperature of stator (24) to a maximum temperature of 135 °
C (275 °F). Install the cam with the IMPELLER SIDE facing downward. Continue with the
installation until freewheel cam (30) contacts the retaining ring (not shown).
15. Install freewheel cam (30) , freewheel springs (29) , freewheel rollers (28) , and bearing race
(27) in stator (24) .
Note: Install freewheel springs (29) with the maximum number of loops toward the outside
diameter of freewheel cam (30) .
Illustration 13 g00877125
16. Install washer (26) and snap ring (25) on stator (24) . Repeat the procedure for the opposite
side of stator (24) .
6/12
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SEBP...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 14 g00877132
17. Install stator (24) on impeller (20) .
18. Install spacer (22) and snap ring (21) on carrier shaft (23) .
Illustration 15 g00319458
19. Install torque converter impeller (19) on the impeller housing.
20. Install bolts (18) . The torque for bolts (18) is 60 ± 7 N·m (44 ± 5 lb ft).
7/12
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SEBP...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 16 g00319500
21. Install roller bearing (17) on output shaft (15) .
22. Install seal ring (16) .
Illustration 17 g00319456
23. Install output shaft (15) in the carrier assembly.
24. Install retaining ring (14) that secures output shaft (15) .
Illustration 18 g00319455
25. Install drive gear (13) .
8/12
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SEBP...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 19 g03652860
26. Install pump drive gear (11) to the underside of torque converter housing (1) .
Illustration 20 g03652939
27. Install Tooling (A) and a suitable lifting device to install torque converter housing (1) onto
the torque converter assembly. The weight of torque converter housing (1) is approximately
113 kg (250 lb).
Illustration 21 g00319448
9/12
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SEBP...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. 28. Install bolts (6) that hold the torque converter to the torque converter housing. The torque
for bolts (6) are 60 ± 7 N·m (44 ± 5 lb ft).
Illustration 22 g00319453
29. Install bearing (12) and drive gear shaft (10) in pump drive gear (11) .
30. Install Tooling (B) on pump drive gear (11) .
Illustration 23 g00319451
31. Place the assembly in the original position. Make sure that drive gear shaft (10) is in the
torque converter housing bore.
32. Remove Tooling (B) from pump drive gear (11) .
10/12
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SE...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
26. Illustration 24 g00319450
33. Install bolt (9) that holds shaft (10) to torque converter housing (1) . The torque for bolt (9)
is 105 ± 20 N·m (75 ± 15 lb ft).
Illustration 25 g00319449
34. Install pump drive flange (8) and bolts (7) . The torque for bolts (7) is 60 ± 7 N·m (44 ± 5 lb
ft).
Illustration 26 g00319447
11/12
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SE...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. 35. Apply Tooling (D) to torque converter speed sensor (5) . Install torque converter speed
sensor (5) . Adjust the torque converter speed sensor in order to maintain an air gap of 0.71
± 0.18 mm (0.028 ± 0.007 inch). The torque for torque converter speed sensor (5) is 25 ± 5
N·m (18 ± 4 lb ft).
Illustration 27 g00319445
36. Install washer (4) and bolt (3) . The torque for bolt (3) is 105 ± 20 N·m (75 ± 15 lb ft).
37. Install transmission oil pump (2) . Refer to Disassembly and Assembly, "Transmission Oil
Pump - Install".
Illustration 28 g00319444
38. Install Tooling (A) and a suitable lifting device to torque converter housing (1) , as shown.
End By: Connect the torque converter to the transmission and to the output gears. Refer to
Disassembly and Assembly, "Torque Converter to Transmission, Output Gears - Connect".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Mar 23 10:37:13 UTC+0800 2020
12/12
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SE...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...