1. What do you need to be informed of about Kilning and Acclimatization of Timber Flooring Melbourne
Timber Flooring Melbourne can be regarded as one of the most delicate products since it comes from e
natural source which expands as well as contracts with the seasonal change. Most surprisingly, this kind
of flooring gets affected by the moisture which happens to be a content of the air. It is vital that we
should not forget about the natural product 'timber' that it remains to be an organic product which
easily gets affected by the climatic condition.
What is Acclimatization?
The process gets practiced with the main intention of ensuring that the timber floorings get ready to get
safely installed. It is actually a process of letting partial equalization of the hardwood timber flooring
moisture content when such gets supplied at an environment where the timber needs to get installed.
Supply of timber
Several customers of some timber company may become the victim of purchasing timber which gets
poorly kiln dried and does not gets settled. Therefore using such a variety can cause serious problem like
cupping or shrinking. To make a minimization of the timber movement of the laid floor that results into
swelling due to the moisture shrinking or moisture uptake, it remains significant to lay a board which
shows minimal moisture content.
Assessment of the site
All the residential as well as building sites need to undergo a site assessment and climate assessment
prior to the Timber Flooring Melbourne installation. Relative humidity remains to be another major
influence which makes determination of whether the flooring will be absorbing much of the air content
or it will be shrinking or getting contracted with again moisture content. The building place or the site
need to be assessed enough so as to check adequate ventilation of its sub floor. This remains to be an
extremely vital factor in minimizing cupping or expansion of the timber flooring. If the humidity is high
beneath the floor, the timber board will be cupping within the surface. Timber acts as a type of sponge
which acts adequate water and at the same time spits it up.
Percentage of the moisture content
It remains equally significant to be well aware about the right content of moisture percentage especially
for the geographical location where the place is situated. When the place is sitting under much a dried
environment that is in some isolated inland regions or in other air conditioned residential areas, or if the
place is in some coastal areas, flooring is required to get acclimatized well within its site.
Piling of boards so as to make sure about the moisture acclimatization
When making store of the timber made floorboards for the purpose of acclimatization, if timber gets
stacked on the top, then the ones which will be stacked in middle will not be able to breath, infact it will
be all suffocated in between of the other that gets stacked below or above the middle ones.
Thus is information regarding kilning vs acclimatization of the timber flooring. Therefore be aware of
everything before getting involved in such kind of practices.

2. To know more about Victorian Designer Floors and to gain some insightful knowledge on Bamboo
Flooring then please Click here.