More Related Content
Similar to 3gpp report 20130606 (20)
3gpp report 20130606
- 2. Confidential
Copyright © Gemtek Technology Co., Ltd.
All Rights Reserved. 2013/6/10
Outline
Introduction
Test cases
6.1.2.4 Cell reselection
6.1.2.5 Cell reselection for interband operation
6.1.2.6 Cell reselection using Qhyst, Qoffset and
Treselection
2
- 3. Confidential
Copyright © Gemtek Technology Co., Ltd.
All Rights Reserved. 2013/6/10
Cell Reselection (1/3)
Intra frequency and inter frequency with the same priority
3
- 5. Confidential
Copyright © Gemtek Technology Co., Ltd.
All Rights Reserved. 2013/6/10
Cell Reselection (3/3)
SIB 3~5
-SystemInformationBlockType3 contains cell re-selection information,
mainly related to the serving cell;
-SystemInformationBlockType4 contains information about the serving
frequency and intra-frequency neighbouring cells relevant for cell re-
selection (including cell re-selection parameters common for a
frequency as well as cell specific re-selection parameters);
-SystemInformationBlockType5 contains information about other E-
UTRA frequencies and inter-frequency neighbouring cells relevant for
cell re-selection (including cell re-selection parameters common for a
frequency as well as cell specific re-selection parameters);
5
- 6. Confidential
Copyright © Gemtek Technology Co., Ltd.
All Rights Reserved. 2013/6/10
6.1.2.4 Cell reselection (1/3) 6
with { UE in E-UTRA RRC_IDLE state }
ensure that {
when { UE detects the cell ranked as the
best cell }
then { UE reselects the new cell }
}
- 7. Confidential
Copyright © Gemtek Technology Co., Ltd.
All Rights Reserved. 2013/6/10
6.1.2.4 Cell reselection (2/3) 7
System Simulator
Cell 1 and Cell 2
UE
None
Preamble
The UE in state Registered, Idle mode (state 2) on Cell 1 (serving
cell) according to [18].
Pre-test conditions
- 9. Confidential
Copyright © Gemtek Technology Co., Ltd.
All Rights Reserved. 2013/6/10
6.1.2.5 Cell reselection for interband operation
(1/6)
with { UE in E-UTRA RRC_IDLE state }
ensure that {
when { UE detects the cell re-selection
criteria are met for the cell on
different frequency band }
then { UE reselects the new cell}
}
9
- 10. Confidential
Copyright © Gemtek Technology Co., Ltd.
All Rights Reserved. 2013/6/10
6.1.2.5 Cell reselection for interband operation
(2/6)
System Simulator
Cell 1, Cell 10
System information combination 3 as defined in TS 36.508
[18] clause 4.4.3.1 is used in E-UTRA cells.
UE
None
Preamble
The UE is in state Registered, Idle mode (state 2) on Cell 1
(serving cell) according to [18].
10
Pre-test conditions
- 12. Confidential
Copyright © Gemtek Technology Co., Ltd.
All Rights Reserved. 2013/6/10
6.1.2.5 Cell reselection for interband operation
(4/6) 12
Specific message contents
- 13. Confidential
Copyright © Gemtek Technology Co., Ltd.
All Rights Reserved. 2013/6/10
6.1.2.5 Cell reselection for interband operation
(5/6) 13
Specific message contents
- 14. Confidential
Copyright © Gemtek Technology Co., Ltd.
All Rights Reserved. 2013/6/10
6.1.2.5 Cell reselection for interband operation
(6/6)
14
Test procedure sequence
- 15. Confidential
Copyright © Gemtek Technology Co., Ltd.
All Rights Reserved. 2013/6/10
6.1.2.6 Cell reselection using Qhyst, Qoffset
and Treselection (1/16)
(1)
with { UE in E-UTRA RRC_IDLE state, and the UE is
not in high mobility state }
ensure that {
when { Qhyst is non-zero or its value changes
in system information }
then { UE reselects the highest ranked cell
taking the actual Qhyst value into account }
}
15
- 16. Confidential
Copyright © Gemtek Technology Co., Ltd.
All Rights Reserved. 2013/6/10
6.1.2.6 Cell reselection using Qhyst, Qoffset
and Treselection (2/16)
(2)
with { UE in E-UTRA RRC_IDLE state, and the UE is
not in high mobility state }
ensure that {
when { cell reselection criteria are fulfilled
during a time interval Treselection }
then { UE reselects the highest ranked cell }
}
16
- 17. Confidential
Copyright © Gemtek Technology Co., Ltd.
All Rights Reserved. 2013/6/10
6.1.2.6 Cell reselection using Qhyst, Qoffset
and Treselection (3/16)
(3)
with { UE in E-UTRA RRC_IDLE state, and the UE is
not in high mobility state }
ensure that {
with { Qoffset is non-zero or its value
changes in system information }
then { UE reselects the highest ranked
cell taking the actual Qoffset value
into account }
}
17
- 18. Confidential
Copyright © Gemtek Technology Co., Ltd.
All Rights Reserved. 2013/6/10
6.1.2.6 Cell reselection using Qhyst, Qoffset
and Treselection (4/16)
System Simulator
Cell 1 and Cell 2 have different tracking areas according to
table 6.0.1-2
System information combination 2 as defined in TS 36.508
[18] clause 4.4.3.1 is used in E-UTRA cells.
UE
None
Preamble
The UE is in state Registered, Idle mode (state 2) on Cell 1
according to [18].
18
Pre-test conditions
- 19. Confidential
Copyright © Gemtek Technology Co., Ltd.
All Rights Reserved. 2013/6/10
6.1.2.6 Cell reselection using Qhyst, Qoffset
and Treselection (5/16) 19
Pre-test conditions
- 20. Confidential
Copyright © Gemtek Technology Co., Ltd.
All Rights Reserved. 2013/6/10
6.1.2.6 Cell reselection using Qhyst, Qoffset
and Treselection (6/16) 20
Pre-test conditions
- 21. Confidential
Copyright © Gemtek Technology Co., Ltd.
All Rights Reserved. 2013/6/10
6.1.2.6 Cell reselection using Qhyst, Qoffset
and Treselection (7/16) 21
Test procedure sequence
- 22. Confidential
Copyright © Gemtek Technology Co., Ltd.
All Rights Reserved. 2013/6/10
6.1.2.6 Cell reselection using Qhyst, Qoffset
and Treselection (8/16) 22
Test procedure sequence
- 23. Confidential
Copyright © Gemtek Technology Co., Ltd.
All Rights Reserved. 2013/6/10
6.1.2.6 Cell reselection using Qhyst, Qoffset
and Treselection (9/16) 23
Test procedure sequence
- 24. Confidential
Copyright © Gemtek Technology Co., Ltd.
All Rights Reserved. 2013/6/10
6.1.2.6 Cell reselection using Qhyst, Qoffset
and Treselection (10/16)
modification period (in number of radio frames)
modificationPeriodCoeff * defaultPagingCycle / 10ms
modificationPeriodCoeff
In SIB2, with values 1, 2, 4, 8 (although certain vendor
implementation allows 2, 4, 8, 16)
defaultPagingCycle
In SIB2, is 320ms, 640ms, 1280ms, 2560ms
24
Test procedure sequence
- 25. Confidential
Copyright © Gemtek Technology Co., Ltd.
All Rights Reserved. 2013/6/10
6.1.2.6 Cell reselection using Qhyst, Qoffset
and Treselection (11/16) 25
Test procedure sequence
- 26. Confidential
Copyright © Gemtek Technology Co., Ltd.
All Rights Reserved. 2013/6/10
6.1.2.6 Cell reselection using Qhyst, Qoffset
and Treselection (12/16) 26
Test procedure sequence
- 27. Confidential
Copyright © Gemtek Technology Co., Ltd.
All Rights Reserved. 2013/6/10
6.1.2.6 Cell reselection using Qhyst, Qoffset
and Treselection (13/16) 27
Test procedure sequence
- 28. Confidential
Copyright © Gemtek Technology Co., Ltd.
All Rights Reserved. 2013/6/10
6.1.2.6 Cell reselection using Qhyst, Qoffset
and Treselection (14/16) 28
Test procedure sequence
- 29. Confidential
Copyright © Gemtek Technology Co., Ltd.
All Rights Reserved. 2013/6/10
6.1.2.6 Cell reselection using Qhyst, Qoffset
and Treselection (15/16) 29
Test procedure sequence
- 30. Confidential
Copyright © Gemtek Technology Co., Ltd.
All Rights Reserved. 2013/6/10
6.1.2.6 Cell reselection using Qhyst, Qoffset
and Treselection (16/16) 30
Specific message contents