Shamu tail fluke stocking

Shamu Tail Fluke Stocking

Materials
Black and white felt
Shamu Tail Fluke Stocking Template
Construction Paper
Scissors
Stapler
Glue
Glitter
Marker
6 ft Black Yarn
Hole Puncher

Using template provided, cut out the tail fluke shape out of construction paper.
With a marker, trace the construction paper template onto the white piece of felt.

Lay the piece of white felt onto the black felt. Be sure the black felt covers the whole template.
To keep the pieces together, staple the felt together inside the template.

Cut out the template. Be sure to keep the black and white pieces of felt together.

Punch holes around the border of the fluke. There should be 7 holes along the bottom and 4 holes on each side (not including the whole in the bottom corner).

Tie yarn to the upper left hand corner hole, and then thread down through the rest of the holes. Once you reach the last hole, leave enough yarn for the hanging loop and tie the end of the yarn to the original knot.

Write your name (or make a design) on the black side of the tail fluke in glue.
(Don’t be afraid to use a lot of glue. The more glue you use, the more glitter can stick.)

Quickly, cover the glue with glitter.

After about 10-15 minutes, brush any excess glue off the tail fluke onto a piece of paper to transfer back to the glitter bottle.
Once completely dry, brush off any excess glitter from the felt.

For more information on killer whales and SeaWorld Adventure Camps please visit:
www.SeaWorld.org
Happy Holidays!

Shamu tail fluke stocking

by saseaworld

Accessibility

Upload Details

Usage Rights

2 Embeds 76

Statistics

Shamu tail fluke stocking Presentation Transcript

http://www.seaworldsanantonioblog.com	75
http://m.seaworldsanantonioblog.com	1