Two major places for mold to occur; bathroom and basement. Prevent mold from taking over your house. Visit website.

1. ==== ====
Prevent Mold: Basements and Bathrooms, Natural Places for Mold Visit website
http://www.stopmoldcold.com
==== ====
The basement of a house is normally one of the most common places for molds and fungus to
start emerging. This is because your basement is a warm, dark and sometimes humid place for it
to thrive and breed. In fact, those conditions are perfect for creating a "fungus-factory" just below
your house or wherever these conditions are met.
There are many ways to ensure that the molds in basement do not start to accumulate and cause
problems. Treating a problem like this will depend solely on 4 major factors which can be summed
up as:
Contain the existing problem or molds that are accumulating - this is to prevent it from extending to
other unaffected areas of the house or basement.
Eliminate or eradicate the existing molds that have been identified
Get rid of the dead mold that is left
Prevent the mold from plaguing your basement again and the areas which have been cleaned out
in the future
The first thing to understand how mold in basement occurs is that it requires the right conditions
and environment, one of which is the most critical is that there is moisture or dampness in the
environment. If there is moisture, there is a possibility that your main problem is not molds but
there could be water seeping into your basement which then creates the environment for the
molds or fungus to thrive in. You will need to check your basement for cracks or gaps in the wall
when there is a heavy downpour. Other areas to look out for could be leaky pipes or plumbing and
even blocked air-conditioning which could cause water to accumulate. Once you have identified
the root cause of the leakage, it will most likely solve the symptom as well which in this case is
referring to the molds growing on the walls of the basement.
As for the existing molds on the walls, you will need fungicides and antimicrobial coatings which
can be found at your local hardware store or even create your own concoction of it by reading on
the Internet or purchasing books on it. You will need to cordon off the area which is affected with
plastic sheeting and ensure that you have protective gear such as masks and suits to ensure that
you do not inhale the spores when you begin spraying fungicide in the area. Make sure the area is
properly ventilated or that the air is being filtered and there is nobody around when you are doing
this. After removing all surface molds, you will need to consider getting rid of any area such as
wood, furniture or fungus infected material out of the area so it does not come back again. Repaint
the area and reapply fungicide to the entire basement to prevent another occurrence of molds in
basement.
Hopefully, with this primer on preventing molds, your basement is one step closer to being fungus-
free.

2. Find out strangely enough that the molds in basements are actually caused by water or moisture
in the area and how you can save hundreds or thousands of dollars by implementing simple tips to
solve it once and for all. Discover more by heading over to
http://basementandwaterproofingproducts.com
Article Source:
http://EzineArticles.com/?expert=Jim_Handy
==== ====
Prevent Mold: Basements and Bathrooms, Natural Places for Mold Visit website
http://www.stopmoldcold.com
==== ====