Introduction to Embedded System division at Global CyberSoft

1. INTRODUCTION TO EMBEDDED
SYSTEM DIVISION
June 25, 2009

2. Division Background
• Profile
o Experienced in embedded development since 2003
o Strong experience developing low level software, communication
protocols on embedded targets
o Strong experience with variety embedded SW/HW platforms such as
 Windows Mobile, Android, Linux, Symbian, VxWorks, OSEK
 ARM, x86, PowerPC, Freescale, ZSP, ITRON
• Size: ~60 staffs
• Our objective is to double the
division size every two years

3. Business & Domain Focus

4. Scope of activities
Mobile & Consumer Real-time &
Embedded Critical Systems
System Maintenance and New Development Services
Verification and Validation at Functional and System Levels
Experienced Experienced in
CMMI-4
Embedded delivering high
Engineering Electronic quality embedded
Methodologies Engineering Team software

5. Mobile & Consumer Embedded
• Application porting,
Mobile & Consumer OS/Firmware integration for
Embedded
Smartphone, PDA,
consumer electronics.
• Device driver development
for add-on hardware
• Audio, image codec with
DSP enable hardware

6. Real-time & Critical Systems
Real-time & • Integration of industrial
Critical Systems control systems
• Firmware integration for
measurement equipments
• Medical/Healthcare equipment
and control systems
• Aerospace, Automotive
o Cluster, Dashboard
o Body and Chassis control
software
o Infotainment, telematics
systems

7. Technologies and Tools
• Strong experience working with many technologies
o Experience in porting middleware between Linux, Windows, Windows
CE, VxWorks, Symbian, Proprietary OS, etc.
o Experience with RTOS such as VxWorks, RTLinux, QNX, OSEK
o Experience working with various PLC (FAM3, Siemens, Mitsubishi
and Rockwell) control systems
o Experience with various embedded protocol such as CAN, LIN,
FlexRay, IP, SPI, I2C, etc.
• Familiar with many tools and methodologies
o Requirements: Rectify, IBM Requisite Pro, Telelogic Doors
o Issue Tracking: Bugzilla, JIRA, Scarab, Mantis, etc.
o Development tools: Visual Studio, Code Warrior, Green Hills, Wind
River, Eclipse
o Configuration tools: CVS, SVN, Perforce, Clearcase
o Methodologies: Model-based validation, Model Driven Development

8. Some Valued Clients
Confidential Page 8

9. Services Offering
• Mobile & Consumer Embedded
o System integration and verification
o Application porting, verification and maintenance
o Application development
• Embedded software
o Control system with OS (operating system) or without OS
(using proprietary scheduler)
o Porting service for industrial or medical control system
(maintenance or migration between different HW/OS)
o Development and verification of navigation system and
in-car communication systems
o Development and verification of industrial, real-time
control systems

10. Resource ramp up capacity
• Resource training
o Every new engineer will receive specific training and practice project
related to the technologies and domain of the project
o The estimated duration of the training ranges from 2 to 4 weeks.
o Candidate is able to join the project only if they pass the certified test
at the end of the training period
• Ramp up capacity
o Fewer than 5 engineers: Within 4 weeks
o From 5 to 10 engineers: Within 6 weeks
o From 10 to 20 engineers: Within 10 weeks

11. We welcome your questions
Thank you for your interest in Global Cybersoft.
For further information, please contact:
Ly Lam
Vice President,
Embedded System Division
Tel: +84-8-54371199
Cell: +84-908-487-804
E-mail: lylam@globalcybersoft.com