Kitchen Ventilation We supply a wide range of kitchen canopy systems to meet the demands of the most modern commercial kitchens and are used for the commercial, healthcare, educational and private sectors and are increasingly popular in restaurants, schools, hospitals and hotels. Our own Canvent canopy systems can be configured to suit virtually any application, with a range of advanced features such as heat recovery, uv filtration, fire suppression and gas safety detectors fitted as necessary. Our range includes condense, dishwash, wall mounted, extract and supply, peripheral extract and induction canopies. All canopies are manufactured from 304 (En 1.4301) or 316 (En 1.4401) where specified and are suitably braced to prevent product distortion. All joints are welded and polished. Systems are manufactured to the strict guidelines of DW/172, British Standards and conform to HSE for kitchen ventilation systems. Our control systems include gas detection and shut off, CO and CO2 sensors and fire suppression. Our canopy lighting products are sealed and meet all modern hygiene and safety standards.

1. Project Profile
King Edward High School, Edgbaston, Birmingham
Consultant
■ Shaylor
Client
■ MVL
Sector
Front Entrance
■ Education
Products
■ CanVent Systems
Equipment
■ Cooking Equipment
CanVent Island Kitchen Canopy
Application Airtherm Engineering Limited has completed a supply and
installation of multiple kitchen ventilation hoods at a well-known
■ Extract Canopy’s School in Edgbaston, Birmingham.
The main island canopy sized at 9.0m x 3.0m, complete with grease
baffle filters, lights and condense channel was designed with a slope
to feature the existing 1950s glass construction style. We also
supplied and install various other stainless steel wall mounted
extract hoods connecting onto the existing ductwork arrangement.
Airtherm had been given just 4 days to remove the existing metal &
glass hoods and install the new stainless steel kitchen canopies.
0844 809 2509 | airtherm.co.uk | info@airtherm.co.uk

2. Product Solution
Product Range
Our product range extends from simple condense canopies, extract only, island or wall
mounted canopies, through to our air injection island systems allowing both input and
extract. If required, the input air can be pre-heated for additional internal staff
comfort during the cold winter months. All products can be configured to suit each
individual application.
Manufacture
All canopies are manufactured from 304 (En 1.4301) or 316 (En 1.4401) stainless steel
where specified and are suitably braced to prevent product distortion. All joints are
welded and polished.
Wall Mounted Extract Our Canopies are cut, punched and folded into sub sections and factory assembled by
means of computer controlled seam welds, and non-visible mechanical fixings.
Systems are manufactured to the strict guidelines of DW/172, British Standards and
conform to HSE for commercial kitchen ventilation. Wall mounted or island canopies
can be manufactured to meet almost any dimension but typically 1000mm to 8000mm
long. The system ductwork is manufactured and installed to incorporate cleaning and
maintenance access doors to fully comply with DW/144 & TR/19 standards.
Health and Safety
All of our canopy systems are manufactured to the strict guidelines of DW/172, British
Standards and conform to HSE for kitchen ventilation systems. All canopies and
associated components are thoroughly tested to ensure high standards to meet with
Stainless Steel Hood our clients expectations.
Our lighting units are sealed to industry standards to prevent the ingress of moisture,
grease or heat. They meet all necessary hygiene and safety requirements.
Our control panels are designed to meet our clients demands and system features
available include gas detection and shut-offs, C0 and C02 detectors and fire
Existing Hood suppression systems with a link to the building alarm system.
Contact Details: Installation
Airtherm Engineering Ltd Our canopy installation teams are made up of experienced personnel, fully trained in
and aware of all the latest statutory requirements and standards for each project they
Ventilation House
undertake.
Pedmore
Each team member holds the correct qualifications (CSCS, IPATH, height awareness,
Stoubridge fire assessment, access towers) for his or her job.
West Midlands
DY9 0DS
Tel: 0844 8092509
Fax: 01562 887312
0844 809 2509 | airtherm.co.uk | info@airtherm.co.uk