Abacus Heat Transfer Pvt. Ltd @ Designer , Manufcaturer and supplier of Heat Exchanger,Air Receivers , Pressure vessel , Air Dryer in India ..Call us today @####

1. Designers, Manufacturers and Supplier of all type of Heat Exchangers,
Air Dryers, PressureVessels,Air Receivers, Industrial Chilling Units,
Reactors,Columns, Inter / After / Oil coolers, Dx Condensers &
Chillers, HotWater Generators,Calorifiers etc.

2.  Abacus is the leader in design and manufacture of HeatTransfer
Equipments and Industrial Chilling Equipments.We have the services for
Thermal Designing, Mechanical Designing, Fabrication, Drawings, Site
Installation
Designing facilities
We have fully equipped Design Department capable of doing thermal
and mechanical designs of all offered equipment in house and thereafter
generating fabrication drawings of the same.The designing is done as
per various design codes viz. IS,ASME,TEMA,API,ASHRAE, BS etc.We
have extensive computer hardware and software to facilitate our
designing as well as other areas of concern within the organization.
Strength
In house Detailed Engineering for all manufactured items, i.e. Process
(Thermal) Design, Mechanical Design and Fabrication Drawings, fully
utilising the modern tools of Computer Aided Designing is where the real
strength of Abacus lies.

3.  Tube Heat Exchangers.
 Air Cooled Heat Exchanger.
 Inter / After / Oil Coolers.
 U' & StraightTube Bundles.
 PressureVessels.
 Columns.
 Reactors.
 Process Condensers.
 Chemical StorageVessels.
 Calorifiers / Economisers.
 Air Receivers.
 HotWater Generators.
 De-Super Heaters / Pre Heaters.
 Air Cooled Chillers.
 Water Cooled Chillers.
 Walk-In Cold Rooms upto (-)40oC.

4.  Major raw material is in the form of plates, pipes and tubes.
Carbon Steels used is confirming to is, ASME etc. viz. SA 515 / 516
Gr 60 / 70, SA 105, SA 266 GR 2, IS 2002-2, IS 2062 GR A, SA 210,
SA 179, SA 106-B, SA 333 GR 6 etc. shell thickness upto 50 MM,
tubes sheets upto 150 MM and tubes upto 2.5" OD.
Stainless steels used is confirming to SA 240, SA 213, SA 312, SA
182 Grades 304, 304L, 316, 316L, 316TI, 321, 347, duplex SA 2205
etc. shell thickness upto 40 MM, tubes sheets upto 150 MM and
tubes upto 2.5" OD.
Lots of other non ferrous materials also form part of regular
production such as, Copper, Brass, Naval Brass,Admiralty Brass,
Phosphorous Bronze, Al. Bronze, Cupronickel,Titanium, Monel,
Inconel, Hastalloy etc. in all grades shell thickness upto 40 mm,
tubes sheets upto 150 mm and tubes upto 2.5" OD.

5.  Non Ferrous
Aluminium Bronze
 Naval Brass
 Admirality Brass
 Phosphorous Bronze
 Cupro-Nickel
 Monel, Inconel
 Copper, Brass
 Hastelloy
 Titanium
 Nickel
 Duplex Steel, etc.

6.  Brine / Glycol Chillers
a) Site inspections and Evaluations.
b) Replacement of Adsorbents (Alumina and
SilicaGel)
c) Retrofits, retubing, revamping and
upgrades.
d ) Replacement parts and instrumentations.
e ) Replacement tube bundle & coolers.