MEPL INGECTA-EP is a two pack Synthetic Resin in Hyderabad, Andhra Pradesh and it has excellent flow ability which is required for an injecting grouping system. ADVANTAGES / BENEFITS : MEPL INGECTA-EP is resistant to chemicals. MEPL INGECTA-EP gives high strength at early stages. MEPL INGECTA-EP has excellent flowability which is required for an injecting grouting system. MEPL INGECTA-EP helps in imparting nonshrink property to properly made cementitious grout as it is solvent free epoxy resin. This non-shrink nature helps to maintain bond with contact surfaces. AREAS OF APPLICATIONS: For repairs and rehabilitation of structures showing hairline cracks. For filling up cracks in roof slabs and other areas to make them structurally sound. For repairs and rehabilitation of cracks in load bearing elements of bridges, columns, beams , girders etc., For filling cracks associated with cold joints as they can be completely sealed by using MEPL INGECTA-EP and it requires no further vibration to fill the cracks. APPLICATION: The mixed grout or concrete with MEPL GROUT AD should be used within about 20-30 minutes.Care should be taken to ensure cleanliness of the subtrates and they should be moisted enough. Grout should be used as early as possible maintaining a continuous flow-otherwise it may lead to placing and pumping problems. All loose particles laitance , grease and should be removed from the substrate. PRECAUTIONS: It is better to handle MEPL INGECTA-EP with gloves. Splashes on to skin if any should be washed with plenty of water. When it comes in contact with eyes take medical advice. SUPPLY MEPL INGECTA-EP is supplied in 1 and 3 Kg Packs. SHELF LIFE - 6months CONSUMPTION: Approx 1.08 Kg of material is required to fill up 1000 cc DIRECTIONS FOR USAGE: First all the cracks where grouting has to be done should be identified. Nipples are inserted into the cracks after drilling holes at regular intervals.Through them, using a low pressure injection grouting system, MEPL INGECTA-EP is injected. The mixed material should be injected well before the given pot life. TECHNICAL SUPPORT: Technical information and guidance regarding MEPL range of admixtures, SBR Latex, repairs and bonding, Water Proofing Chemicals, epoxy industrial flooring systems etc, will be available from the technical services department, MAYURESHWAR ENTERPRISES PRIVATE LIMITED. MEPL products undergo high standard quality checks and every reasonable precaution is taken in the manufacture of all products. MEPL continuously strive to ensure the products, recommendations, specifications & information given is reliable, correct and accurate. No specific guarantee can be assured as product performance depends not only on quality but also on many other factors which are not under our control. The customer should make his own trials to determine the compatibility of the product for his ownpurpose.