What materials are available that are suitable for mass production due to very short cycle times? How can weight savings of over 40% compared to using steel parts be achieved? Dr.-Ing Marcus Schuck, Head of R&D at HBW-Gubesch GmbH in Germany prepared the following exclusive presentation on the topic: "New processes for large scale automotive production of composite applications". Download the full presentation for free here: http://bit.ly/SP_Presentation_Schuck

1. Vertraulich: Diese Information ist Eigentum der Firma HBW-Gubesch Thermoforming GmbH und darf ohne vorherige Genehmigung weder kopiert noch dritten Personen ausgehändigt oder anderweitig missbräuchlich genutzt werden.
Confidential : This data is property of HBW-Gubesch Thermoforming GmbH and must not be copied or handed to other persons without our prior written consent.
New processes for large scale automotive
production of composite applications (PART II)
02.-04.12.2014, IQPC AUTOMOTIVE COMPOSITES
Material innovation and capability for mass production, Köln
Dr.-Ing. Marcus Schuck1
1 HBW-Gubesch Thermoforming GmbH
Industriestr. 1, 91489 Wilhelmsdorf
Deutschland / Germany
Tel.: +49 (0)9104 / 8270-0
m.schuck@hbw-gubesch.de
www.hbw-gubesch.de