2. People measure their windows for a lot of purpose including
blinds, shades and Interior shutters. There are blinds
made to measure for your exact requirements, those are
readymade products to size by yourself. Measuring the
windows is necessary to make sure that you can buy the
correct size of blinds that need to be installed. There are
some steps for your windows blinds made to measure.
3. 1. In order to measure your windows you need to use a steel
tape, do not try to measure with cloth tape, ruler or yardstick.
2. Always be precise in measuring windows, in the part of
measuring small things like windows accuracy is very
important. Rounding the value is not really a good idea in
measuring the windows. For example, you get 54 ¾ for the
size of an area, you need to use 54 ¾ exactly and not 55.
3. Keep yourself cautious about transposing your
measurements; while keeping measurements always note
down the width first and then the height. Use a cross sign
between them to separate.
Steps to measure your windows for blinds
4. 4. Measure for Inside-Mount Blinds, it is mounted on the
window frame for a neater look. If the window is set in a deep
recess, fitting blind inside makes for a neat finish. But mistakes
in measurements can ruin them altogether. Measure the width
of a recess in three places; at the top, at the middle, and at the
bottom. You have to make sure that you grip both ends of the
tape on the inside edges of the recess. The smallest
measurement, as it will be the one you use. Measure the
height of the recess three times: at the left, at the center, and
at the right and you also need to make sure you will hold both
ends of the tape on the inside edges of the recess.
5. 5. Measure for the outside mount blinds. The outside mounted
blinds are mounted on the walls outside the window frame.
Maybe this is not the preferred method, but an insufficient
window depth may call for this type of mounting. Always
determine where the mount will be placed, it should be placed
1 ½ to 3 inches above the window. Measure the height of
blinds, do it from the suggested area of the mount down to 2-4
inches below the bottom of the window. The remaining overlap
is to block out light and ensure your privacy. Lastly, measure
carefully for the width of any set of blinds and add between 2
and 4 inches on each side.
6. Practice to measure at least twice before the recording of the
final measurement.