SGIS Training Introduction


Published on

SGIS Presentation

  • Be the first to comment

  • Be the first to like this

No Downloads
Total views
On SlideShare
From Embeds
Number of Embeds
Embeds 0
No embeds

No notes for slide

SGIS Training Introduction

  1. 1. Novice SMART Board Tutorial The Smart Way
  2. 2. Objectives: · Ensure a basic understanding of hardware and software ·Encourage the integration of technology into daily lessons ·Use existing resources
  3. 3. Hardware Basics The Smart Way
  4. 4. Typical Classroom Setup computer projector SMART Board Pull Pull Using the clipart shown, demonstrate how you would connect a SMART Board for classroom use.
  5. 5. Click with Your Finger A press with your finger is the same as a mouse click Pull Pull
  6. 6. Analog Resistive Technology When the front layer touches the back layer the SMART Board registers the touch Pull Pull
  7. 7. Board Basics & The Pen Tray Pull Pull · No batteries required ·Can use any object to write ·Fine motor control issues Pull Pull · Press with intent ·Only one point of contact
  8. 8. To quickly access the orientation screen press the two buttons on the pen tray (directly below the eraser) simultaneously. To complete the orientation process, touch each point at its direct center. The computer will record your screen press upon release. If you want to go back to the previous point, press one of the two buttons. Orienting the Board
  9. 9. To input text while standing at the SMART Board, press the on-screen keyboard button. While typing, remember that the SMART Board only accepts one point of contact at a time. The keyboard can be customized by changing the view and the settings. Try it. The On-Screen Keyboard
  10. 10. To access the right mouse button (or control click on a Mac) while standing at the SMART Board, press the right click mouse button. A bubble will appear in the lower right hand corner informing you that your next screen press will be a right click. The Right-Click Button
  11. 11. Writing and Erasing Use the pens to write on the board . Use the eraser to erase your writing. Remember to press firmly. Also, remember that the SMART Board only accepts one point of contact.
  12. 12. Select the eraser tool . Draw a large circle around the area that you wish to erase and then tap in the center of that circle. Erasing a Large Area: Circle Tap
  13. 13. The Digital Ink Layer
  14. 14. Notebook Tutorial Exploring the Notebook Toolbar
  15. 15. Navigation Buttons Displays the previous notebook page Displays the next notebook page Adds a new blank page to your notebook
  16. 16. The Screen Shade The screen shade button can be placed overtop of any page. You can then use it to reveal information in smaller portions. When you click the button the screen appears. Little dimples will appear on the screen along the edges. Click on one of the circles and drag it towards the center. Double tap anywhere on the shade to restore it. Click the button to get rid of the shade.
  17. 17. Full Screen Mode The full screen button can be used to optimize the amount of board space to write on. Use the arrow buttons to move forward and backward through the pages of this notebook. To exit full screen click the exit full screen button.
  18. 18. Dual Page Display The dual page display button can be used to show 2 Notebook pages at once. To exit out of dual page display select the same button. ( Tip- select View- Zoom-Pin Page to keep 1 page stationary as you go through your Notebook file.)
  19. 19. Capture Toolbar Area capture : press on the screen and, using constant pressure , drag a square around the object or area that you want to capture. When you release the pressure on the SMART Board , Notebook will take a picture and insert it into your file. Try capturing a portion of your desktop or a portion of an internet window. Click on the camera icon to bring up the screen capture toolbar T his toolbar will float over top of ALL windows so that you can access the screen capture feature while working in ANY application. Window capture : press inside the window you want to capture. Release the pressure once the desired window appears as a hatched area. Notebook will capture the hatched area. Note that checking the 'capture to new page' box allows you to control where the captured image is displayed. Screen capture : navigate to the screen that you want to capture. A single press will capture the entire screen. Freehand Capture : Press and drag to create a freehand shape around the area that you want to capture. Release pressure once the desired area is selected.
  20. 20. Tables The tables button can be used to insert a table into Notebook. Select the number of rows and columns to create the table. Marquee select the entire table and use the handle on the top left to move. You can add/delete cells, add cell shades, and drag and drop into cells.
  21. 21. The Pen & Highlighter The pen tool can be used to write, draw or highlight in Notebook when not connected to a SMART Board. The pens and highlighters can be customized by clicking on the properties tab.
  22. 22. The Pen & Highlighter It was a small, comfortable room with two windows. The front one looked out onto the graveyard, the other to a little garden at the side. The large black range stood solidly in an alcove in the back wall, a thick dark pipe curving its way upward through the ceiling. Stretched out beneath the side window were a few shelves filled with books, old newspapers and odds and ends and by the front window stood a heavy wooden table with two chairs below. The flagstone floor was covered in a crimson, green and brown rug. Willie glanced at the armchair by the range and the objects that lay on top of the small wooden table; a pipe, a book and a baccy jar. From : Goodnight Uncle Tom Teaching Visualization - A Bird's Eye View
  23. 23. The Creative Pen Tool Use the creative pen tool to write on the board.
  24. 24. The Line Tool The line tool can be used to draw different types of lines. Select the properties tab to customize the lines.
  25. 25. The Line Tool: Perspective Drawing Pull Pull Perspective lines: Straight lines, drawn at an angle from the edges of objects, back into perceived distant space, until they finally converge at a point on the horizon line. These lines establish guidelines for drawing objects in proper perspective.
  26. 26. The Shape Tool Use the shape tool to add a variety of shapes to the page. Customize any shape by selecting the properties tab .
  27. 27. The Shape Pen Use the shape pen to add allow your shapes to snap. Try drawing a circle, triangle, and square.
  28. 28. The Shape Pen What shapes can you see? Suggested Examples: · Hiding and revealing, geometry, art, counting activities...
  29. 29. The Presentation Pen Use the presentation pen to access the spotlight, magnifier, and disappearing ink.
  30. 30. prime odd multiple of 5 prime 9 3 5 10 odd multiple of 5 2 Presentation pen - spotlight Presentation pen - spotlight
  31. 31. Presentation pen - magnifier Presentation pen - magnifier
  32. 32. The Fill Tool Use the fill tool to fill objects with a specific color.
  33. 33. Fill tool Fill tool 1900-1920 1920-1940 1940-1960 vacuum cleaner tea bags neon lamps hearing aids television electric razor electron microscope electric guitar aqualung microwave 1900-1920 1920-1940 1940-1960 hovercraft
  34. 34. The Text Tool Click to create a text box for typing. After selecting this tool, tap anywhere on the page. If you click the keyboard button on the pen tray an on-screen keyboard will appear. You can now type in the text-box. if you prefer, you can also enter text from your computer's keyboard. NOTE: Text boxes cannot be erased with the eraser. You must use the delete button .
  35. 35. The Vertically Challenged Button Click on to move the toolbar to the bottom. This allows shorter students to reach the toolbar.
  36. 36. The Slide Sorter The slide sorter can be moved from left to right using the button. This allows users to present from either side of the SMART Board. Can expand it to see all the slides at once Organizing content ensuring flow Reorganizing after a period of reflection Brainstorming and then grouping similar ideas onto different pages allows you to jump back and forth to revisit previously developed ideas
  37. 38. The Properties Tab The properties tab allows you to change properties of an object, set transparency, create object animation, and page recording.
  38. 39. Bacter Bacter Bacter Bacter Animation - spin Which of these triangles are equilateral? Animation - spin Which of these triangles are equilateral?
  39. 40. Page Recording Click on the properties tab and select page recording. This allows you to record a step by step process and save it as a recording on a Notebook page.
  40. 41. The Transparency Tool Select a shape and use the transparency tool from the properties tab to alter the transparency of the shape. Overlap shapes to see how the transparency works.
  41. 42. 1 2 3 4 5 6 7 8 9 10 1 1 1 2 1 3 1 4 21 91 81 71 61 51 41 31 22 32 82 72 62 52 42 92 23 93 83 73 63 53 43 33 24 34 44 94 84 74 64 54 25 15 35 75 65 55 45 95 85 16 96 86 76 66 56 46 36 26 17 77 67 57 47 37 27 97 87 18 98 88 78 68 58 48 38 28 19 89 79 69 59 49 39 29 99 100 90 80 70 60 50 40 30 20
  42. 43. Resizing & Rotating Use the select tool to select one of the shapes above (by tapping on it). This will bring up three handles. Drag the green circle to rotate the shape. Drag the white circle to resize the shape. The third handle is the drop down menu. We will explore this option later. Example
  43. 44. Exploring the Drop Down Menu
  44. 45. The Drop Down Menu When you select an object (image, writing, typing) a drop down menu appears . Select the object above to see the drop down menu.
  45. 46. When you write something on the board with a pen additional options will appear in the drop down menu. Notebook has a built in text recognition feature and will return its 4 best guesses at what it is that you're trying to write. Click on the word above, from the drop down menu, choose the correct recognize option for this word. Now try it with another word. Text Recognition
  46. 47. The infinite cloner from the drop down menu allows you to create multiple copies of one item. Click on 'Dolly the Sheep'. From the drop down menu, select infinite cloner . Now you can drag multiple copies of Dolly onto the page. Infinite Cloner
  47. 48. Find the area of the following shapes. The area is _______ square units. The area is _______ square units. 18 20 Infinite Cloner
  48. 50. Layering Layer the following cards in increasing numerical order. Objects in NB are layered in the order that they were created. To change the order of an object, tap on the object and select order from the drop down menu . Send backwards will take the object one layer backwards while send to back will take the object all the way to the back in one step. The same is true for bring forward and bring to front .
  49. 51. Layers with Working
  50. 52. Locking The locking feature can also be found in the drop down menu. Lock in place will stop an object from moving on the page. You can unlock an object by clicking the little padlock icon and selecting "unlock".
  51. 53. Linking The linking feature allows you to link to a web page, page in Notebook, attachments file, or file on your computer.
  52. 54. Linking to the Internet Click on the image above to bring up the drop down menu . From the menu, select 'link' and then type in the internet address that you wish to link to. Don't forget to choose 'object' or 'corner icon' . Click 'ok' to complete the link.
  53. 55. Linking to the Internet SPACE Telescopes The Moon The Planets The Sun
  54. 56. Copying Images from the Internet To quickly copy an image from the internet simply locate the image that you want and then drag and drop it into your Notebook file. Make sure that the object that you want is actually an image and not just a link to an image. Also, be sure to reference the image. Click on the icon above and drag and drop the picture into Notebook. You need to be connected to the internet to complete this activity.
  55. 57. Exploring the Gallery
  56. 58. Click on the Gallery Side Tab and explore the extensive gallery collection. It is organized into folders and subfolders. Navigate through the folders by clicking the plus signs. When you see something you like, double click or drag it into your workspace. The Gallery Tab
  57. 59. You can search the gallery by typing a keyword into the search box at the top of the gallery page. Use the on-screen keyboard to type the words by clicking the keyboard button on the pen tray. Keyword Search
  58. 60. Keyword Search Types of Gallery Content pictures backgrounds interactive and multimedia lesson activities notebook files and pages