The delivery men use a heavy-duty dolly tocarry the 900 lb. hot tub through our gate!
The process of positioning the hot tub includedleaving clearance space around all sides of thehot tub and shimming one side of the spa. We had our hot tub exactly where we wanted it, thanks to our free home site inspection.
Getting to know our new Hot TubThe next part of our Thermospas hot tub installation was learning how it worked.
The first step was to remove the 2 outer side panels and cut through the styrofoam.
This was the only side that needed to beremoved since this is where the motor and pumps are located.
The Thermospas delivery guy was an expert,and explained all the parts of our hot tub and how they worked.
We found out how easy it was to remove theside panels (its just a couple screws) and the panels are reversible!
The Thermospas delivery guy then went overchemicals, filters and the maintenance of our new Thermospas hot tub.
After getting some pointers from the Thermospas delivery guy, we filled up our tubwith 300 gallons of water and then checked the ph levels.
We were so excited about our new Thermospashot tub, we didnt want to wait the 4 hours to get in, so it was a bit cold...