SlideShare a Scribd company logo

08 gsm bss network kpi (immediate assignment success rate) optimization manual

T
T

gsm bss optimization manual

08 gsm bss network kpi (immediate assignment success rate) optimization manual

1 of 34
Download to read offline
GSM BSS Network KPI (Immediate Assignment Success Rate) Optimization Manual INTERNAL
Product Name Confidentiality Level
GSM BSS INTERNAL
Product Version
Total 34 pages
GSM BSS Network KPI (Immediate
Assignment Success Rate) Optimization
Manual
(For internal use only)
Prepared by GSM&UMTS
Network Performance
Research Department
Wang Fei
Date
2008-06-18
Reviewed by Date
Reviewed by Date
Granted by Date
Huawei Technologies Co., Ltd
All rights reserved
2008-10-25 All Rights Reserved Page 1 of 34
GSM BSS Network KPI (Immediate Assignment Success Rate) Optimization Manual INTERNAL
Revision Record
Date Revision
Version
Change Description Author
2008-06-18 0.8 Draft completed. Wang Fei
2008-07-18 1.0 The document is modified according to
review comments.
Wang Fei
2008-10-25 All Rights Reserved Page 2 of 34
GSM BSS Network KPI (Immediate Assignment Success Rate) Optimization Manual INTERNAL
References
Number References Author Date
1 GSM BSS Network KPI (Immediate
Assignment Success Rate) Baseline
Liu Xiuyu 2007-03-10
2008-10-25 All Rights Reserved Page 3 of 34
GSM BSS Network KPI (Immediate Assignment Success Rate) Optimization Manual INTERNAL
Content
1 Overview of the Immediate Assignment Success Rate..............................................................7
1.1 Definition.................................................................................................................................7
1.2 Signaling Procedure and Measurement Points......................................................................8
1.3 Symptom Description .............................................................................................................8
2 Factors Concerning Immediate Assignment Success Rate........................................................9
2.1 Signaling Factors....................................................................................................................9
2.2 Factor Analyzing According to the Definition of the KPI.........................................................9
2.3 Factors Analysis....................................................................................................................11
2.3.1 Equipment Faults............................................................................................................11
2.3.2 Um Interface Problems...................................................................................................11
2.3.3 SDCCH Congestion........................................................................................................11
2.3.4 MS Problems..................................................................................................................12
3 Method of Analyzing the Problem of Low Immediate Assignment Success Rate.....................12
3.1 Process of Analyzing the Problem of Low Immediate Assignment Success Rate...............12
3.2 Method of Solving the Problem of Low Immediate Assignment Success Rate....................14
3.2.1 Equipment Faults............................................................................................................14
3.2.2 Um Interface Problem.....................................................................................................14
3.2.3 System Capacity (Congestion) Analysis ........................................................................19
3.2.4 MS Problem Analysis......................................................................................................24
4 Test Method...............................................................................................................................26
5 Cases of Immediate Assignment Success Rate Optimization..................................................27
5.1 Case 1: Decrease in Immediate Assignment Success Rate Because of SDCCH Congestion
Caused by Incorrect LAC Setting...........................................................................................27
5.2 Case 2: SDCCH Congestion Caused by a Burst of Location Updates................................28
5.3 Case 3: Low Assignment Success Rate Because the RACH Minimum Access Level Is Set
to 0.........................................................................................................................................28
5.4 Case 4: Low Immediate Assignment Success Rate in Some Cells Because of MS Error...30
6 Onsite Information that Needs to Be Obtained.........................................................................33
2008-10-25 All Rights Reserved Page 4 of 34
GSM BSS Network KPI (Immediate Assignment Success Rate) Optimization Manual INTERNAL
Tables
Table 1 Mapping between formulae and factors..........................................................................10
2008-10-25 All Rights Reserved Page 5 of 34
GSGSM BSS Network KPI (Immediate Assignment Success Rate) Optimization Manual INTERNAL
GSM BSS Network KPI (Immediate Assignment
Success Rate) Optimization Manual
Abstract
Key Words: SDCCH, immediate assignment success rate
Abstract: This document provides the procedure for analyzing the
problems about immediate assignment success rate, describes the
troubleshooting procedure, and provides typical cases.
Abbreviations:
Abbreviation Full Spelling
BSC Base Station Controller
BTS Base Tranceiver Station
SDCCH Stand-alone Dedicated Control
Channel
2014-6-18 Huawei Technologies Proprietary Page 6 of 34
Ad

Recommended

12 gsm bss network kpi (tch assignment success rate) optimization manual
12 gsm bss network kpi (tch assignment success rate) optimization manual12 gsm bss network kpi (tch assignment success rate) optimization manual
12 gsm bss network kpi (tch assignment success rate) optimization manualtharinduwije
 
Huawei parameter strategy v1.4 1st dec
Huawei parameter strategy v1.4  1st decHuawei parameter strategy v1.4  1st dec
Huawei parameter strategy v1.4 1st decKetut Widya
 
04 gsm bss network kpi (tch call drop rate) optimization manual
04 gsm bss network kpi (tch call drop rate) optimization manual04 gsm bss network kpi (tch call drop rate) optimization manual
04 gsm bss network kpi (tch call drop rate) optimization manualtharinduwije
 
Kpi 2g troubleshootin
Kpi 2g troubleshootinKpi 2g troubleshootin
Kpi 2g troubleshootinAbd Yehia
 
Ericsson optimization opti
Ericsson optimization optiEricsson optimization opti
Ericsson optimization optiTerra Sacrifice
 
07 gsm bss network kpi (call setup success rate) optimization manual
07 gsm bss network kpi (call setup success rate) optimization manual07 gsm bss network kpi (call setup success rate) optimization manual
07 gsm bss network kpi (call setup success rate) optimization manualtharinduwije
 
Systesm information layer 3 messages
Systesm information layer 3 messagesSystesm information layer 3 messages
Systesm information layer 3 messagesTelebeansolutions
 

More Related Content

What's hot

Huawei case analysis call drop
Huawei case analysis call dropHuawei case analysis call drop
Huawei case analysis call dropMuffat Itoro
 
14 gsm bss network kpi (call setup time) optimization manual[1].doc
14 gsm bss network kpi (call setup time) optimization manual[1].doc14 gsm bss network kpi (call setup time) optimization manual[1].doc
14 gsm bss network kpi (call setup time) optimization manual[1].doctharinduwije
 
2G optimization_with_optima
2G optimization_with_optima2G optimization_with_optima
2G optimization_with_optimaZIZI Yahia
 
03 gsm bss network kpi (sdcch congestion rate) optimization manual
03 gsm bss network kpi (sdcch congestion rate) optimization manual03 gsm bss network kpi (sdcch congestion rate) optimization manual
03 gsm bss network kpi (sdcch congestion rate) optimization manualtharinduwije
 
2 g training optimization
2 g training optimization2 g training optimization
2 g training optimizationAhmed Gad
 
Nokia gsm-kpi-analysis-based-on-daily-monitoring-basis-presentation
Nokia gsm-kpi-analysis-based-on-daily-monitoring-basis-presentationNokia gsm-kpi-analysis-based-on-daily-monitoring-basis-presentation
Nokia gsm-kpi-analysis-based-on-daily-monitoring-basis-presentationmohammed khairy
 
2 g and 3g kpi improvement by parameter optimization (nsn, ericsson, huawei) ...
2 g and 3g kpi improvement by parameter optimization (nsn, ericsson, huawei) ...2 g and 3g kpi improvement by parameter optimization (nsn, ericsson, huawei) ...
2 g and 3g kpi improvement by parameter optimization (nsn, ericsson, huawei) ...Jean de la Sagesse
 
Call Setup Success Rate Definition and Troubleshooting
Call Setup Success Rate Definition and Troubleshooting Call Setup Success Rate Definition and Troubleshooting
Call Setup Success Rate Definition and Troubleshooting Assim Mubder
 
Huawei - Access failures troubleshooting work shop
Huawei - Access failures troubleshooting work shopHuawei - Access failures troubleshooting work shop
Huawei - Access failures troubleshooting work shopnavaidkhan
 
Gsm bss kpi analysis
Gsm bss kpi analysisGsm bss kpi analysis
Gsm bss kpi analysisHassan Imam
 
02 gsm bss network kpi (sdcch call drop rate) optimization manual
02 gsm bss network kpi (sdcch call drop rate) optimization manual02 gsm bss network kpi (sdcch call drop rate) optimization manual
02 gsm bss network kpi (sdcch call drop rate) optimization manualtharinduwije
 
52 gsm bss network performance ps kpi (downlink tbf establishment success rat...
52 gsm bss network performance ps kpi (downlink tbf establishment success rat...52 gsm bss network performance ps kpi (downlink tbf establishment success rat...
52 gsm bss network performance ps kpi (downlink tbf establishment success rat...tharinduwije
 
279934373-6-GSM-Paging-Affecting-Factors-Check-Methods-and-Tools-and-Delivera...
279934373-6-GSM-Paging-Affecting-Factors-Check-Methods-and-Tools-and-Delivera...279934373-6-GSM-Paging-Affecting-Factors-Check-Methods-and-Tools-and-Delivera...
279934373-6-GSM-Paging-Affecting-Factors-Check-Methods-and-Tools-and-Delivera...ssuser38e5dc1
 
Ericsson important optimization parameters
Ericsson important optimization parametersEricsson important optimization parameters
Ericsson important optimization parametersPagla Knight
 
Lte irat-troubleshooting-guide
Lte irat-troubleshooting-guideLte irat-troubleshooting-guide
Lte irat-troubleshooting-guideDenmark Wilson
 

What's hot (20)

Sdcch
SdcchSdcch
Sdcch
 
Huawei case analysis call drop
Huawei case analysis call dropHuawei case analysis call drop
Huawei case analysis call drop
 
Cs fallback feature
Cs fallback featureCs fallback feature
Cs fallback feature
 
14 gsm bss network kpi (call setup time) optimization manual[1].doc
14 gsm bss network kpi (call setup time) optimization manual[1].doc14 gsm bss network kpi (call setup time) optimization manual[1].doc
14 gsm bss network kpi (call setup time) optimization manual[1].doc
 
Part 3 optimization 3G
Part 3 optimization 3GPart 3 optimization 3G
Part 3 optimization 3G
 
2G optimization_with_optima
2G optimization_with_optima2G optimization_with_optima
2G optimization_with_optima
 
03 gsm bss network kpi (sdcch congestion rate) optimization manual
03 gsm bss network kpi (sdcch congestion rate) optimization manual03 gsm bss network kpi (sdcch congestion rate) optimization manual
03 gsm bss network kpi (sdcch congestion rate) optimization manual
 
2 g training optimization
2 g training optimization2 g training optimization
2 g training optimization
 
Nokia gsm-kpi-analysis-based-on-daily-monitoring-basis-presentation
Nokia gsm-kpi-analysis-based-on-daily-monitoring-basis-presentationNokia gsm-kpi-analysis-based-on-daily-monitoring-basis-presentation
Nokia gsm-kpi-analysis-based-on-daily-monitoring-basis-presentation
 
GSM Idle Mode Behavior
GSM Idle Mode BehaviorGSM Idle Mode Behavior
GSM Idle Mode Behavior
 
2 g and 3g kpi improvement by parameter optimization (nsn, ericsson, huawei) ...
2 g and 3g kpi improvement by parameter optimization (nsn, ericsson, huawei) ...2 g and 3g kpi improvement by parameter optimization (nsn, ericsson, huawei) ...
2 g and 3g kpi improvement by parameter optimization (nsn, ericsson, huawei) ...
 
Call Setup Success Rate Definition and Troubleshooting
Call Setup Success Rate Definition and Troubleshooting Call Setup Success Rate Definition and Troubleshooting
Call Setup Success Rate Definition and Troubleshooting
 
Huawei - Access failures troubleshooting work shop
Huawei - Access failures troubleshooting work shopHuawei - Access failures troubleshooting work shop
Huawei - Access failures troubleshooting work shop
 
Gsm bss kpi analysis
Gsm bss kpi analysisGsm bss kpi analysis
Gsm bss kpi analysis
 
02 gsm bss network kpi (sdcch call drop rate) optimization manual
02 gsm bss network kpi (sdcch call drop rate) optimization manual02 gsm bss network kpi (sdcch call drop rate) optimization manual
02 gsm bss network kpi (sdcch call drop rate) optimization manual
 
52 gsm bss network performance ps kpi (downlink tbf establishment success rat...
52 gsm bss network performance ps kpi (downlink tbf establishment success rat...52 gsm bss network performance ps kpi (downlink tbf establishment success rat...
52 gsm bss network performance ps kpi (downlink tbf establishment success rat...
 
279934373-6-GSM-Paging-Affecting-Factors-Check-Methods-and-Tools-and-Delivera...
279934373-6-GSM-Paging-Affecting-Factors-Check-Methods-and-Tools-and-Delivera...279934373-6-GSM-Paging-Affecting-Factors-Check-Methods-and-Tools-and-Delivera...
279934373-6-GSM-Paging-Affecting-Factors-Check-Methods-and-Tools-and-Delivera...
 
Ericsson important optimization parameters
Ericsson important optimization parametersEricsson important optimization parameters
Ericsson important optimization parameters
 
Lte irat-troubleshooting-guide
Lte irat-troubleshooting-guideLte irat-troubleshooting-guide
Lte irat-troubleshooting-guide
 
UMTS/LTE/EPC Call Flows for CSFB
UMTS/LTE/EPC Call Flows for CSFBUMTS/LTE/EPC Call Flows for CSFB
UMTS/LTE/EPC Call Flows for CSFB
 

Viewers also liked

16 gsm bss network kpi (inter rat handover success rate) optimization manual[...
16 gsm bss network kpi (inter rat handover success rate) optimization manual[...16 gsm bss network kpi (inter rat handover success rate) optimization manual[...
16 gsm bss network kpi (inter rat handover success rate) optimization manual[...tharinduwije
 
05 gsm bss network kpi (tch congestion rate) optimization manual
05 gsm bss network kpi (tch congestion rate) optimization manual05 gsm bss network kpi (tch congestion rate) optimization manual
05 gsm bss network kpi (tch congestion rate) optimization manualtharinduwije
 
53 gsm bss network ps kpi (success rate of uplink tbf establishments) optimiz...
53 gsm bss network ps kpi (success rate of uplink tbf establishments) optimiz...53 gsm bss network ps kpi (success rate of uplink tbf establishments) optimiz...
53 gsm bss network ps kpi (success rate of uplink tbf establishments) optimiz...tharinduwije
 
Gsm bss-network-kpi-tch-assignment-success-rate-optimization-manual(asr)
Gsm bss-network-kpi-tch-assignment-success-rate-optimization-manual(asr)Gsm bss-network-kpi-tch-assignment-success-rate-optimization-manual(asr)
Gsm bss-network-kpi-tch-assignment-success-rate-optimization-manual(asr)Ayann Khan
 
COORDINATION OF ACTUATED SIGNALS FOR A CORRIDOR
COORDINATION OF ACTUATED SIGNALS FOR A CORRIDORCOORDINATION OF ACTUATED SIGNALS FOR A CORRIDOR
COORDINATION OF ACTUATED SIGNALS FOR A CORRIDORRakesh Venkateswaran
 
Machine Learning and Optimization For Traffic and Emergency ...
Machine Learning and Optimization For Traffic and Emergency ...Machine Learning and Optimization For Traffic and Emergency ...
Machine Learning and Optimization For Traffic and Emergency ...butest
 
Brandon Signals Council Presentation
Brandon Signals Council PresentationBrandon Signals Council Presentation
Brandon Signals Council PresentationCity Brandon
 
Urban Traffic Estimation & Optimization: An Overview
Urban Traffic Estimation & Optimization: An OverviewUrban Traffic Estimation & Optimization: An Overview
Urban Traffic Estimation & Optimization: An OverviewRakedet
 
KPI measurement
KPI measurementKPI measurement
KPI measurementkpphelu
 
PTV Vissig Optimisation Share
PTV Vissig Optimisation SharePTV Vissig Optimisation Share
PTV Vissig Optimisation ShareJulian Laufer
 
Improve tbf drop
Improve tbf dropImprove tbf drop
Improve tbf dropFadi Hasem
 
09 gsm bss network kpi (handover success rate) optimization manual
09 gsm bss network kpi (handover success rate) optimization manual09 gsm bss network kpi (handover success rate) optimization manual
09 gsm bss network kpi (handover success rate) optimization manualtharinduwije
 
Future of intelligent transportation CIO Roundtable 080214
Future of intelligent transportation   CIO Roundtable 080214Future of intelligent transportation   CIO Roundtable 080214
Future of intelligent transportation CIO Roundtable 080214James Sutter
 
50 gsm bss network ps kpi (download rate) optimization manual[1].doc
50 gsm bss network ps kpi (download rate) optimization manual[1].doc50 gsm bss network ps kpi (download rate) optimization manual[1].doc
50 gsm bss network ps kpi (download rate) optimization manual[1].doctharinduwije
 
LAFINHAN O. O. FINAL YEAR PROJECT PRESENTATION
LAFINHAN O. O. FINAL YEAR PROJECT PRESENTATIONLAFINHAN O. O. FINAL YEAR PROJECT PRESENTATION
LAFINHAN O. O. FINAL YEAR PROJECT PRESENTATIONTobi Lafinhan
 
15 gsm bss network kpi (rx quality) optimization manual[1].doc
15 gsm bss network kpi (rx quality) optimization manual[1].doc15 gsm bss network kpi (rx quality) optimization manual[1].doc
15 gsm bss network kpi (rx quality) optimization manual[1].doctharinduwije
 
Traffic Signal Re-timing Studies to Reduce Congestion and Emissions
Traffic Signal Re-timing Studies to Reduce Congestion and EmissionsTraffic Signal Re-timing Studies to Reduce Congestion and Emissions
Traffic Signal Re-timing Studies to Reduce Congestion and EmissionsSociety of Women Engineers
 
GIS for traffic signal optimization.
GIS for traffic signal optimization.GIS for traffic signal optimization.
GIS for traffic signal optimization.Vinod Shinde
 

Viewers also liked (20)

16 gsm bss network kpi (inter rat handover success rate) optimization manual[...
16 gsm bss network kpi (inter rat handover success rate) optimization manual[...16 gsm bss network kpi (inter rat handover success rate) optimization manual[...
16 gsm bss network kpi (inter rat handover success rate) optimization manual[...
 
05 gsm bss network kpi (tch congestion rate) optimization manual
05 gsm bss network kpi (tch congestion rate) optimization manual05 gsm bss network kpi (tch congestion rate) optimization manual
05 gsm bss network kpi (tch congestion rate) optimization manual
 
53 gsm bss network ps kpi (success rate of uplink tbf establishments) optimiz...
53 gsm bss network ps kpi (success rate of uplink tbf establishments) optimiz...53 gsm bss network ps kpi (success rate of uplink tbf establishments) optimiz...
53 gsm bss network ps kpi (success rate of uplink tbf establishments) optimiz...
 
Gsm bss-network-kpi-tch-assignment-success-rate-optimization-manual(asr)
Gsm bss-network-kpi-tch-assignment-success-rate-optimization-manual(asr)Gsm bss-network-kpi-tch-assignment-success-rate-optimization-manual(asr)
Gsm bss-network-kpi-tch-assignment-success-rate-optimization-manual(asr)
 
COORDINATION OF ACTUATED SIGNALS FOR A CORRIDOR
COORDINATION OF ACTUATED SIGNALS FOR A CORRIDORCOORDINATION OF ACTUATED SIGNALS FOR A CORRIDOR
COORDINATION OF ACTUATED SIGNALS FOR A CORRIDOR
 
adaptive signal control technology along sw 8th street pilot project
adaptive signal control technology along sw 8th street pilot projectadaptive signal control technology along sw 8th street pilot project
adaptive signal control technology along sw 8th street pilot project
 
Machine Learning and Optimization For Traffic and Emergency ...
Machine Learning and Optimization For Traffic and Emergency ...Machine Learning and Optimization For Traffic and Emergency ...
Machine Learning and Optimization For Traffic and Emergency ...
 
Brandon Signals Council Presentation
Brandon Signals Council PresentationBrandon Signals Council Presentation
Brandon Signals Council Presentation
 
Urban Traffic Estimation & Optimization: An Overview
Urban Traffic Estimation & Optimization: An OverviewUrban Traffic Estimation & Optimization: An Overview
Urban Traffic Estimation & Optimization: An Overview
 
KPI measurement
KPI measurementKPI measurement
KPI measurement
 
PTV Vissig Optimisation Share
PTV Vissig Optimisation SharePTV Vissig Optimisation Share
PTV Vissig Optimisation Share
 
Improve tbf drop
Improve tbf dropImprove tbf drop
Improve tbf drop
 
09 gsm bss network kpi (handover success rate) optimization manual
09 gsm bss network kpi (handover success rate) optimization manual09 gsm bss network kpi (handover success rate) optimization manual
09 gsm bss network kpi (handover success rate) optimization manual
 
Future of intelligent transportation CIO Roundtable 080214
Future of intelligent transportation   CIO Roundtable 080214Future of intelligent transportation   CIO Roundtable 080214
Future of intelligent transportation CIO Roundtable 080214
 
Adaptive Traffic Control Systems Overview
Adaptive Traffic Control Systems OverviewAdaptive Traffic Control Systems Overview
Adaptive Traffic Control Systems Overview
 
50 gsm bss network ps kpi (download rate) optimization manual[1].doc
50 gsm bss network ps kpi (download rate) optimization manual[1].doc50 gsm bss network ps kpi (download rate) optimization manual[1].doc
50 gsm bss network ps kpi (download rate) optimization manual[1].doc
 
LAFINHAN O. O. FINAL YEAR PROJECT PRESENTATION
LAFINHAN O. O. FINAL YEAR PROJECT PRESENTATIONLAFINHAN O. O. FINAL YEAR PROJECT PRESENTATION
LAFINHAN O. O. FINAL YEAR PROJECT PRESENTATION
 
15 gsm bss network kpi (rx quality) optimization manual[1].doc
15 gsm bss network kpi (rx quality) optimization manual[1].doc15 gsm bss network kpi (rx quality) optimization manual[1].doc
15 gsm bss network kpi (rx quality) optimization manual[1].doc
 
Traffic Signal Re-timing Studies to Reduce Congestion and Emissions
Traffic Signal Re-timing Studies to Reduce Congestion and EmissionsTraffic Signal Re-timing Studies to Reduce Congestion and Emissions
Traffic Signal Re-timing Studies to Reduce Congestion and Emissions
 
GIS for traffic signal optimization.
GIS for traffic signal optimization.GIS for traffic signal optimization.
GIS for traffic signal optimization.
 

Similar to 08 gsm bss network kpi (immediate assignment success rate) optimization manual

Gsm bss-network-kpi-call-setup-success-rate-optimization-manual(cssr)
Gsm bss-network-kpi-call-setup-success-rate-optimization-manual(cssr)Gsm bss-network-kpi-call-setup-success-rate-optimization-manual(cssr)
Gsm bss-network-kpi-call-setup-success-rate-optimization-manual(cssr)Ayann Khan
 
Gsm bss-network-kpi-handover-success-rate-optimization-manual(HSR)
Gsm bss-network-kpi-handover-success-rate-optimization-manual(HSR)Gsm bss-network-kpi-handover-success-rate-optimization-manual(HSR)
Gsm bss-network-kpi-handover-success-rate-optimization-manual(HSR)Ayann Khan
 
123589029 gprs-tbf-calculation
123589029 gprs-tbf-calculation123589029 gprs-tbf-calculation
123589029 gprs-tbf-calculationAchmad Salsabil
 
Optimisation process guide
Optimisation process guideOptimisation process guide
Optimisation process guidekillerkitties
 
Neal-DeignReport
Neal-DeignReportNeal-DeignReport
Neal-DeignReportNeal Derman
 
zte umts-cs-call-drop-analysis-guide-zte
zte umts-cs-call-drop-analysis-guide-ztezte umts-cs-call-drop-analysis-guide-zte
zte umts-cs-call-drop-analysis-guide-zte3ggprs
 
01 gsm bss network kpi (mos) optimization manual
01 gsm bss network kpi (mos) optimization manual01 gsm bss network kpi (mos) optimization manual
01 gsm bss network kpi (mos) optimization manualtharinduwije
 
Potential Solutions Co Existence
Potential Solutions   Co ExistencePotential Solutions   Co Existence
Potential Solutions Co ExistenceRoman Agaev
 
2 g modernization cluster acceptance report cluster 8
2 g modernization cluster acceptance report cluster 82 g modernization cluster acceptance report cluster 8
2 g modernization cluster acceptance report cluster 8Arwan Priatna
 
White Paper Leveraging Automation for Advanced Network Troubleshooting
White Paper Leveraging Automation for Advanced Network TroubleshootingWhite Paper Leveraging Automation for Advanced Network Troubleshooting
White Paper Leveraging Automation for Advanced Network TroubleshootingE.S.G. JR. Consulting, Inc.
 
[White Paper] Leveraging-Automation-For-Advanced-Network-Troubleshooting
[White Paper] Leveraging-Automation-For-Advanced-Network-Troubleshooting[White Paper] Leveraging-Automation-For-Advanced-Network-Troubleshooting
[White Paper] Leveraging-Automation-For-Advanced-Network-TroubleshootingNetBrain Technologies
 
Network timing synchroniztion antennas_testing
Network timing synchroniztion antennas_testingNetwork timing synchroniztion antennas_testing
Network timing synchroniztion antennas_testingShari Trussell
 
11gsmpo b-en-gsmgsmnetworksdcchcongestionsolutions-word-201009-130915134031-p...
11gsmpo b-en-gsmgsmnetworksdcchcongestionsolutions-word-201009-130915134031-p...11gsmpo b-en-gsmgsmnetworksdcchcongestionsolutions-word-201009-130915134031-p...
11gsmpo b-en-gsmgsmnetworksdcchcongestionsolutions-word-201009-130915134031-p...Emmanuel Msumali
 
11 gsm bss network kpi (paging success rate) optimization manual
11 gsm bss network kpi (paging success rate) optimization manual11 gsm bss network kpi (paging success rate) optimization manual
11 gsm bss network kpi (paging success rate) optimization manualtharinduwije
 
An Oversight or a New Customer Phenomenon, Getting the Most of your Contact C...
An Oversight or a New Customer Phenomenon, Getting the Most of your Contact C...An Oversight or a New Customer Phenomenon, Getting the Most of your Contact C...
An Oversight or a New Customer Phenomenon, Getting the Most of your Contact C...Cisco Canada
 
Fannie mae bmc remedy its mv7 production infrastructure_v8_021009
Fannie mae bmc remedy its mv7 production infrastructure_v8_021009Fannie mae bmc remedy its mv7 production infrastructure_v8_021009
Fannie mae bmc remedy its mv7 production infrastructure_v8_021009Accenture
 
NAM Q4a 2011 UAT Strategy Document v1 0
NAM Q4a 2011 UAT Strategy Document v1 0NAM Q4a 2011 UAT Strategy Document v1 0
NAM Q4a 2011 UAT Strategy Document v1 0David Crane
 
Gsm kpi optimization
Gsm kpi optimizationGsm kpi optimization
Gsm kpi optimizationBernard Sqa
 
IRJET- A New High Speed Wide Fan in Carry Look Ahead Adder Design using M...
IRJET-  	  A New High Speed Wide Fan in Carry Look Ahead Adder Design using M...IRJET-  	  A New High Speed Wide Fan in Carry Look Ahead Adder Design using M...
IRJET- A New High Speed Wide Fan in Carry Look Ahead Adder Design using M...IRJET Journal
 

Similar to 08 gsm bss network kpi (immediate assignment success rate) optimization manual (20)

Gsm bss-network-kpi-call-setup-success-rate-optimization-manual(cssr)
Gsm bss-network-kpi-call-setup-success-rate-optimization-manual(cssr)Gsm bss-network-kpi-call-setup-success-rate-optimization-manual(cssr)
Gsm bss-network-kpi-call-setup-success-rate-optimization-manual(cssr)
 
Gsm bss-network-kpi-handover-success-rate-optimization-manual(HSR)
Gsm bss-network-kpi-handover-success-rate-optimization-manual(HSR)Gsm bss-network-kpi-handover-success-rate-optimization-manual(HSR)
Gsm bss-network-kpi-handover-success-rate-optimization-manual(HSR)
 
Gsm hosr
Gsm hosrGsm hosr
Gsm hosr
 
123589029 gprs-tbf-calculation
123589029 gprs-tbf-calculation123589029 gprs-tbf-calculation
123589029 gprs-tbf-calculation
 
Optimisation process guide
Optimisation process guideOptimisation process guide
Optimisation process guide
 
Neal-DeignReport
Neal-DeignReportNeal-DeignReport
Neal-DeignReport
 
zte umts-cs-call-drop-analysis-guide-zte
zte umts-cs-call-drop-analysis-guide-ztezte umts-cs-call-drop-analysis-guide-zte
zte umts-cs-call-drop-analysis-guide-zte
 
01 gsm bss network kpi (mos) optimization manual
01 gsm bss network kpi (mos) optimization manual01 gsm bss network kpi (mos) optimization manual
01 gsm bss network kpi (mos) optimization manual
 
Potential Solutions Co Existence
Potential Solutions   Co ExistencePotential Solutions   Co Existence
Potential Solutions Co Existence
 
2 g modernization cluster acceptance report cluster 8
2 g modernization cluster acceptance report cluster 82 g modernization cluster acceptance report cluster 8
2 g modernization cluster acceptance report cluster 8
 
White Paper Leveraging Automation for Advanced Network Troubleshooting
White Paper Leveraging Automation for Advanced Network TroubleshootingWhite Paper Leveraging Automation for Advanced Network Troubleshooting
White Paper Leveraging Automation for Advanced Network Troubleshooting
 
[White Paper] Leveraging-Automation-For-Advanced-Network-Troubleshooting
[White Paper] Leveraging-Automation-For-Advanced-Network-Troubleshooting[White Paper] Leveraging-Automation-For-Advanced-Network-Troubleshooting
[White Paper] Leveraging-Automation-For-Advanced-Network-Troubleshooting
 
Network timing synchroniztion antennas_testing
Network timing synchroniztion antennas_testingNetwork timing synchroniztion antennas_testing
Network timing synchroniztion antennas_testing
 
11gsmpo b-en-gsmgsmnetworksdcchcongestionsolutions-word-201009-130915134031-p...
11gsmpo b-en-gsmgsmnetworksdcchcongestionsolutions-word-201009-130915134031-p...11gsmpo b-en-gsmgsmnetworksdcchcongestionsolutions-word-201009-130915134031-p...
11gsmpo b-en-gsmgsmnetworksdcchcongestionsolutions-word-201009-130915134031-p...
 
11 gsm bss network kpi (paging success rate) optimization manual
11 gsm bss network kpi (paging success rate) optimization manual11 gsm bss network kpi (paging success rate) optimization manual
11 gsm bss network kpi (paging success rate) optimization manual
 
An Oversight or a New Customer Phenomenon, Getting the Most of your Contact C...
An Oversight or a New Customer Phenomenon, Getting the Most of your Contact C...An Oversight or a New Customer Phenomenon, Getting the Most of your Contact C...
An Oversight or a New Customer Phenomenon, Getting the Most of your Contact C...
 
Fannie mae bmc remedy its mv7 production infrastructure_v8_021009
Fannie mae bmc remedy its mv7 production infrastructure_v8_021009Fannie mae bmc remedy its mv7 production infrastructure_v8_021009
Fannie mae bmc remedy its mv7 production infrastructure_v8_021009
 
NAM Q4a 2011 UAT Strategy Document v1 0
NAM Q4a 2011 UAT Strategy Document v1 0NAM Q4a 2011 UAT Strategy Document v1 0
NAM Q4a 2011 UAT Strategy Document v1 0
 
Gsm kpi optimization
Gsm kpi optimizationGsm kpi optimization
Gsm kpi optimization
 
IRJET- A New High Speed Wide Fan in Carry Look Ahead Adder Design using M...
IRJET-  	  A New High Speed Wide Fan in Carry Look Ahead Adder Design using M...IRJET-  	  A New High Speed Wide Fan in Carry Look Ahead Adder Design using M...
IRJET- A New High Speed Wide Fan in Carry Look Ahead Adder Design using M...
 

More from tharinduwije

Lte ue initial attach & detach from networkx
Lte ue initial attach & detach from networkxLte ue initial attach & detach from networkx
Lte ue initial attach & detach from networkxtharinduwije
 
Lte system signaling procedures
Lte system signaling proceduresLte system signaling procedures
Lte system signaling procedurestharinduwije
 
Lte radio network planning huawei
Lte radio network planning huaweiLte radio network planning huawei
Lte radio network planning huaweitharinduwije
 
Lte radio netwok planning
Lte   radio netwok planning Lte   radio netwok planning
Lte radio netwok planning tharinduwije
 
Hw lte rf-optimization-guide
Hw lte rf-optimization-guideHw lte rf-optimization-guide
Hw lte rf-optimization-guidetharinduwije
 
E nodeb kpi reference(v100r005c00 02)(pdf)-en
E nodeb kpi reference(v100r005c00 02)(pdf)-enE nodeb kpi reference(v100r005c00 02)(pdf)-en
E nodeb kpi reference(v100r005c00 02)(pdf)-entharinduwije
 
54 gsm bss network performance ps kpi (rtt delay) optimization manual[1].doc
54 gsm bss network performance ps kpi (rtt delay) optimization manual[1].doc54 gsm bss network performance ps kpi (rtt delay) optimization manual[1].doc
54 gsm bss network performance ps kpi (rtt delay) optimization manual[1].doctharinduwije
 
51 gsm bss network performance ps kpi (upload rate) optimization manual[1].doc
51 gsm bss network performance ps kpi (upload rate) optimization manual[1].doc51 gsm bss network performance ps kpi (upload rate) optimization manual[1].doc
51 gsm bss network performance ps kpi (upload rate) optimization manual[1].doctharinduwije
 
13 gsm bss network kpi (network interference) optimization manual[1].doc
13 gsm bss network kpi (network interference) optimization manual[1].doc13 gsm bss network kpi (network interference) optimization manual[1].doc
13 gsm bss network kpi (network interference) optimization manual[1].doctharinduwije
 
10 gsm bss network kpi (uplink downlink balance) optimization manual[1].doc
10 gsm bss network kpi (uplink downlink balance) optimization manual[1].doc10 gsm bss network kpi (uplink downlink balance) optimization manual[1].doc
10 gsm bss network kpi (uplink downlink balance) optimization manual[1].doctharinduwije
 
06 gsm bss network kpi (network coverage) optimization manual
06 gsm bss network kpi (network coverage) optimization manual06 gsm bss network kpi (network coverage) optimization manual
06 gsm bss network kpi (network coverage) optimization manualtharinduwije
 
Dcr optimization after swap
Dcr optimization after swapDcr optimization after swap
Dcr optimization after swaptharinduwije
 

More from tharinduwije (14)

Lte ue initial attach & detach from networkx
Lte ue initial attach & detach from networkxLte ue initial attach & detach from networkx
Lte ue initial attach & detach from networkx
 
Lte system signaling procedures
Lte system signaling proceduresLte system signaling procedures
Lte system signaling procedures
 
Lte radio network planning huawei
Lte radio network planning huaweiLte radio network planning huawei
Lte radio network planning huawei
 
Lte in bullets
Lte in bulletsLte in bullets
Lte in bullets
 
Lte radio netwok planning
Lte   radio netwok planning Lte   radio netwok planning
Lte radio netwok planning
 
Hw lte rf-optimization-guide
Hw lte rf-optimization-guideHw lte rf-optimization-guide
Hw lte rf-optimization-guide
 
E nodeb kpi reference(v100r005c00 02)(pdf)-en
E nodeb kpi reference(v100r005c00 02)(pdf)-enE nodeb kpi reference(v100r005c00 02)(pdf)-en
E nodeb kpi reference(v100r005c00 02)(pdf)-en
 
Lte optimization
Lte optimizationLte optimization
Lte optimization
 
54 gsm bss network performance ps kpi (rtt delay) optimization manual[1].doc
54 gsm bss network performance ps kpi (rtt delay) optimization manual[1].doc54 gsm bss network performance ps kpi (rtt delay) optimization manual[1].doc
54 gsm bss network performance ps kpi (rtt delay) optimization manual[1].doc
 
51 gsm bss network performance ps kpi (upload rate) optimization manual[1].doc
51 gsm bss network performance ps kpi (upload rate) optimization manual[1].doc51 gsm bss network performance ps kpi (upload rate) optimization manual[1].doc
51 gsm bss network performance ps kpi (upload rate) optimization manual[1].doc
 
13 gsm bss network kpi (network interference) optimization manual[1].doc
13 gsm bss network kpi (network interference) optimization manual[1].doc13 gsm bss network kpi (network interference) optimization manual[1].doc
13 gsm bss network kpi (network interference) optimization manual[1].doc
 
10 gsm bss network kpi (uplink downlink balance) optimization manual[1].doc
10 gsm bss network kpi (uplink downlink balance) optimization manual[1].doc10 gsm bss network kpi (uplink downlink balance) optimization manual[1].doc
10 gsm bss network kpi (uplink downlink balance) optimization manual[1].doc
 
06 gsm bss network kpi (network coverage) optimization manual
06 gsm bss network kpi (network coverage) optimization manual06 gsm bss network kpi (network coverage) optimization manual
06 gsm bss network kpi (network coverage) optimization manual
 
Dcr optimization after swap
Dcr optimization after swapDcr optimization after swap
Dcr optimization after swap
 

Recently uploaded

ROBOT PERCEPTION FOR AGRICULTURE AND GOOD PRODUCTION1.1.pdf
ROBOT PERCEPTION FOR AGRICULTURE AND GOOD PRODUCTION1.1.pdfROBOT PERCEPTION FOR AGRICULTURE AND GOOD PRODUCTION1.1.pdf
ROBOT PERCEPTION FOR AGRICULTURE AND GOOD PRODUCTION1.1.pdfRudraPratapSingh871925
 
STRETCHABLE STRAIN SENSORS BASED ON POLYPYRROLE AND THERMOPLASTIC POLYURETHAN...
STRETCHABLE STRAIN SENSORS BASED ON POLYPYRROLE AND THERMOPLASTIC POLYURETHAN...STRETCHABLE STRAIN SENSORS BASED ON POLYPYRROLE AND THERMOPLASTIC POLYURETHAN...
STRETCHABLE STRAIN SENSORS BASED ON POLYPYRROLE AND THERMOPLASTIC POLYURETHAN...MianHusnainIqbal2
 
Critical Literature Review Final -MW.pdf
Critical Literature Review Final -MW.pdfCritical Literature Review Final -MW.pdf
Critical Literature Review Final -MW.pdfMollyWinterbottom
 
BRINDHA G AD21012 SELF INTRODUCTION.pdf
BRINDHA G  AD21012 SELF INTRODUCTION.pdfBRINDHA G  AD21012 SELF INTRODUCTION.pdf
BRINDHA G AD21012 SELF INTRODUCTION.pdfbrindhaaids12
 
TUNNELING IN HIMALAYAS WITH NATM METHOD: A SPECIAL REFERENCES TO SUNGAL TUNNE...
TUNNELING IN HIMALAYAS WITH NATM METHOD: A SPECIAL REFERENCES TO SUNGAL TUNNE...TUNNELING IN HIMALAYAS WITH NATM METHOD: A SPECIAL REFERENCES TO SUNGAL TUNNE...
TUNNELING IN HIMALAYAS WITH NATM METHOD: A SPECIAL REFERENCES TO SUNGAL TUNNE...IRJET Journal
 
Documento 50 - 1-120 - 51+52 borrador.pdf
Documento 50 - 1-120 - 51+52 borrador.pdfDocumento 50 - 1-120 - 51+52 borrador.pdf
Documento 50 - 1-120 - 51+52 borrador.pdfFRANCISCOJUSTOSIERRA
 
Pharaonic Petroleum Company I BP Training Certificate I 2017
Pharaonic Petroleum Company I BP Training Certificate I 2017Pharaonic Petroleum Company I BP Training Certificate I 2017
Pharaonic Petroleum Company I BP Training Certificate I 2017Abdelrahman Al-Gammal
 
Gate-Level Simulation Methodology Improving Gate-Level Simulation Performance
Gate-Level Simulation Methodology Improving Gate-Level Simulation PerformanceGate-Level Simulation Methodology Improving Gate-Level Simulation Performance
Gate-Level Simulation Methodology Improving Gate-Level Simulation Performancesuddentrike2
 
Final Year Project - Automated web based form filling using OCR.pptx
Final Year Project - Automated web based form filling using OCR.pptxFinal Year Project - Automated web based form filling using OCR.pptx
Final Year Project - Automated web based form filling using OCR.pptxswarajkakade83
 
self introduction sri balaji
self introduction sri balajiself introduction sri balaji
self introduction sri balajiSriBalaji891607
 
Into the World of AI GDSC YCCE PPTX.pptx
Into the World of AI GDSC YCCE PPTX.pptxInto the World of AI GDSC YCCE PPTX.pptx
Into the World of AI GDSC YCCE PPTX.pptxGDSCYCCE
 
Sample Case Study of industry 4.0 and its Outcome
Sample Case Study of industry 4.0 and its OutcomeSample Case Study of industry 4.0 and its Outcome
Sample Case Study of industry 4.0 and its OutcomeHarshith A S
 
Economic of Chapter 02 Presentation.pptx
Economic of Chapter 02 Presentation.pptxEconomic of Chapter 02 Presentation.pptx
Economic of Chapter 02 Presentation.pptxManahilAftab4
 
Earthquake Precursor Detection: Technological challenges and opportunities
Earthquake Precursor Detection:  Technological challenges and opportunitiesEarthquake Precursor Detection:  Technological challenges and opportunities
Earthquake Precursor Detection: Technological challenges and opportunitiesManojKumar5547
 
Introduction to WordPress Custom Gutenberg Blocks
Introduction to WordPress Custom Gutenberg BlocksIntroduction to WordPress Custom Gutenberg Blocks
Introduction to WordPress Custom Gutenberg Blockskarthickmurugan02
 
Bresenham line-drawing-algorithm By S L Sonawane.pdf
Bresenham line-drawing-algorithm By S L Sonawane.pdfBresenham line-drawing-algorithm By S L Sonawane.pdf
Bresenham line-drawing-algorithm By S L Sonawane.pdfSujataSonawane11
 
Shankar communication assignment no1 .pdf
Shankar communication assignment no1 .pdfShankar communication assignment no1 .pdf
Shankar communication assignment no1 .pdfshankaranarayanan972
 

Recently uploaded (20)

ROBOT PERCEPTION FOR AGRICULTURE AND GOOD PRODUCTION1.1.pdf
ROBOT PERCEPTION FOR AGRICULTURE AND GOOD PRODUCTION1.1.pdfROBOT PERCEPTION FOR AGRICULTURE AND GOOD PRODUCTION1.1.pdf
ROBOT PERCEPTION FOR AGRICULTURE AND GOOD PRODUCTION1.1.pdf
 
STRETCHABLE STRAIN SENSORS BASED ON POLYPYRROLE AND THERMOPLASTIC POLYURETHAN...
STRETCHABLE STRAIN SENSORS BASED ON POLYPYRROLE AND THERMOPLASTIC POLYURETHAN...STRETCHABLE STRAIN SENSORS BASED ON POLYPYRROLE AND THERMOPLASTIC POLYURETHAN...
STRETCHABLE STRAIN SENSORS BASED ON POLYPYRROLE AND THERMOPLASTIC POLYURETHAN...
 
Critical Literature Review Final -MW.pdf
Critical Literature Review Final -MW.pdfCritical Literature Review Final -MW.pdf
Critical Literature Review Final -MW.pdf
 
IGBT.ppt
IGBT.pptIGBT.ppt
IGBT.ppt
 
Going Staff
Going StaffGoing Staff
Going Staff
 
BRINDHA G AD21012 SELF INTRODUCTION.pdf
BRINDHA G  AD21012 SELF INTRODUCTION.pdfBRINDHA G  AD21012 SELF INTRODUCTION.pdf
BRINDHA G AD21012 SELF INTRODUCTION.pdf
 
TUNNELING IN HIMALAYAS WITH NATM METHOD: A SPECIAL REFERENCES TO SUNGAL TUNNE...
TUNNELING IN HIMALAYAS WITH NATM METHOD: A SPECIAL REFERENCES TO SUNGAL TUNNE...TUNNELING IN HIMALAYAS WITH NATM METHOD: A SPECIAL REFERENCES TO SUNGAL TUNNE...
TUNNELING IN HIMALAYAS WITH NATM METHOD: A SPECIAL REFERENCES TO SUNGAL TUNNE...
 
Documento 50 - 1-120 - 51+52 borrador.pdf
Documento 50 - 1-120 - 51+52 borrador.pdfDocumento 50 - 1-120 - 51+52 borrador.pdf
Documento 50 - 1-120 - 51+52 borrador.pdf
 
Pharaonic Petroleum Company I BP Training Certificate I 2017
Pharaonic Petroleum Company I BP Training Certificate I 2017Pharaonic Petroleum Company I BP Training Certificate I 2017
Pharaonic Petroleum Company I BP Training Certificate I 2017
 
Gate-Level Simulation Methodology Improving Gate-Level Simulation Performance
Gate-Level Simulation Methodology Improving Gate-Level Simulation PerformanceGate-Level Simulation Methodology Improving Gate-Level Simulation Performance
Gate-Level Simulation Methodology Improving Gate-Level Simulation Performance
 
Final Year Project - Automated web based form filling using OCR.pptx
Final Year Project - Automated web based form filling using OCR.pptxFinal Year Project - Automated web based form filling using OCR.pptx
Final Year Project - Automated web based form filling using OCR.pptx
 
self introduction sri balaji
self introduction sri balajiself introduction sri balaji
self introduction sri balaji
 
Into the World of AI GDSC YCCE PPTX.pptx
Into the World of AI GDSC YCCE PPTX.pptxInto the World of AI GDSC YCCE PPTX.pptx
Into the World of AI GDSC YCCE PPTX.pptx
 
Sample Case Study of industry 4.0 and its Outcome
Sample Case Study of industry 4.0 and its OutcomeSample Case Study of industry 4.0 and its Outcome
Sample Case Study of industry 4.0 and its Outcome
 
Economic of Chapter 02 Presentation.pptx
Economic of Chapter 02 Presentation.pptxEconomic of Chapter 02 Presentation.pptx
Economic of Chapter 02 Presentation.pptx
 
Solar PPT.pdf
Solar PPT.pdfSolar PPT.pdf
Solar PPT.pdf
 
Earthquake Precursor Detection: Technological challenges and opportunities
Earthquake Precursor Detection:  Technological challenges and opportunitiesEarthquake Precursor Detection:  Technological challenges and opportunities
Earthquake Precursor Detection: Technological challenges and opportunities
 
Introduction to WordPress Custom Gutenberg Blocks
Introduction to WordPress Custom Gutenberg BlocksIntroduction to WordPress Custom Gutenberg Blocks
Introduction to WordPress Custom Gutenberg Blocks
 
Bresenham line-drawing-algorithm By S L Sonawane.pdf
Bresenham line-drawing-algorithm By S L Sonawane.pdfBresenham line-drawing-algorithm By S L Sonawane.pdf
Bresenham line-drawing-algorithm By S L Sonawane.pdf
 
Shankar communication assignment no1 .pdf
Shankar communication assignment no1 .pdfShankar communication assignment no1 .pdf
Shankar communication assignment no1 .pdf
 

08 gsm bss network kpi (immediate assignment success rate) optimization manual

  • 1. GSM BSS Network KPI (Immediate Assignment Success Rate) Optimization Manual INTERNAL Product Name Confidentiality Level GSM BSS INTERNAL Product Version Total 34 pages GSM BSS Network KPI (Immediate Assignment Success Rate) Optimization Manual (For internal use only) Prepared by GSM&UMTS Network Performance Research Department Wang Fei Date 2008-06-18 Reviewed by Date Reviewed by Date Granted by Date Huawei Technologies Co., Ltd All rights reserved 2008-10-25 All Rights Reserved Page 1 of 34
  • 2. GSM BSS Network KPI (Immediate Assignment Success Rate) Optimization Manual INTERNAL Revision Record Date Revision Version Change Description Author 2008-06-18 0.8 Draft completed. Wang Fei 2008-07-18 1.0 The document is modified according to review comments. Wang Fei 2008-10-25 All Rights Reserved Page 2 of 34
  • 3. GSM BSS Network KPI (Immediate Assignment Success Rate) Optimization Manual INTERNAL References Number References Author Date 1 GSM BSS Network KPI (Immediate Assignment Success Rate) Baseline Liu Xiuyu 2007-03-10 2008-10-25 All Rights Reserved Page 3 of 34
  • 4. GSM BSS Network KPI (Immediate Assignment Success Rate) Optimization Manual INTERNAL Content 1 Overview of the Immediate Assignment Success Rate..............................................................7 1.1 Definition.................................................................................................................................7 1.2 Signaling Procedure and Measurement Points......................................................................8 1.3 Symptom Description .............................................................................................................8 2 Factors Concerning Immediate Assignment Success Rate........................................................9 2.1 Signaling Factors....................................................................................................................9 2.2 Factor Analyzing According to the Definition of the KPI.........................................................9 2.3 Factors Analysis....................................................................................................................11 2.3.1 Equipment Faults............................................................................................................11 2.3.2 Um Interface Problems...................................................................................................11 2.3.3 SDCCH Congestion........................................................................................................11 2.3.4 MS Problems..................................................................................................................12 3 Method of Analyzing the Problem of Low Immediate Assignment Success Rate.....................12 3.1 Process of Analyzing the Problem of Low Immediate Assignment Success Rate...............12 3.2 Method of Solving the Problem of Low Immediate Assignment Success Rate....................14 3.2.1 Equipment Faults............................................................................................................14 3.2.2 Um Interface Problem.....................................................................................................14 3.2.3 System Capacity (Congestion) Analysis ........................................................................19 3.2.4 MS Problem Analysis......................................................................................................24 4 Test Method...............................................................................................................................26 5 Cases of Immediate Assignment Success Rate Optimization..................................................27 5.1 Case 1: Decrease in Immediate Assignment Success Rate Because of SDCCH Congestion Caused by Incorrect LAC Setting...........................................................................................27 5.2 Case 2: SDCCH Congestion Caused by a Burst of Location Updates................................28 5.3 Case 3: Low Assignment Success Rate Because the RACH Minimum Access Level Is Set to 0.........................................................................................................................................28 5.4 Case 4: Low Immediate Assignment Success Rate in Some Cells Because of MS Error...30 6 Onsite Information that Needs to Be Obtained.........................................................................33 2008-10-25 All Rights Reserved Page 4 of 34
  • 5. GSM BSS Network KPI (Immediate Assignment Success Rate) Optimization Manual INTERNAL Tables Table 1 Mapping between formulae and factors..........................................................................10 2008-10-25 All Rights Reserved Page 5 of 34
  • 6. GSGSM BSS Network KPI (Immediate Assignment Success Rate) Optimization Manual INTERNAL GSM BSS Network KPI (Immediate Assignment Success Rate) Optimization Manual Abstract Key Words: SDCCH, immediate assignment success rate Abstract: This document provides the procedure for analyzing the problems about immediate assignment success rate, describes the troubleshooting procedure, and provides typical cases. Abbreviations: Abbreviation Full Spelling BSC Base Station Controller BTS Base Tranceiver Station SDCCH Stand-alone Dedicated Control Channel 2014-6-18 Huawei Technologies Proprietary Page 6 of 34
  • 7. GSGSM BSS Network KPI (Immediate Assignment Success Rate) Optimization Manual INTERNAL 1 Overview of the Immediate Assignment Success Rate Immediate assignment success rate indicates the success rate of the MS accessing the signaling channel. It concerns the procedure from the MS sending a channel required message to the BTS to the MS sending an establish indication message to the network. Immediate assignment success rate is a key access counter. It directly reflects the success rate of the MS accessing the signaling channel and affects the user experience. The BSC versions concerned in this document are as follows: BSC32——G3BSC32V300R007C01B015 BSC6000——BSC6000V900R001 1.1 Definition The immediate assignment success rate is calculated from traffic statistics. The recommended formula is as follows: Immediate Assignment Success Rate = (Successful Immediate Assignments/Immediate Assignment Requests) x 100% 2014-6-18 Huawei Technologies Proprietary Page 7 of 34
  • 8. GSGSM BSS Network KPI (Immediate Assignment Success Rate) Optimization Manual INTERNAL 1.2 Signaling Procedure and Measurement Points BSCBTS MSC Channel REQ Channl RQD Channel ACT Channel ACT ACK I MM ASS CMD f i r st SABM UA EST I ND( CM Ser vi ce REQ) CR( CMP L3 i nf or mat i on) CC CM Ser vi ce Accept ed A1 C1 B1 Note: A1: Immediate Assignment Requests (Channel Requests (Circuit Service)) B1: Immediate Assignment Commands C1: Successful Immediate Assignments (Call Setup Indications (Circuit Service)) 1.3 Symptom Description If the immediate assignment success rate decreases, the following symptoms may occur:  Call setup success rate decreases. 2014-6-18 Huawei Technologies Proprietary Page 8 of 34
  • 9. GSGSM BSS Network KPI (Immediate Assignment Success Rate) Optimization Manual INTERNAL  Congestion occurs frequently on the SDCCH.  Traffic volume on the TCH decreases.  Short messages cannot be successfully sent. …… 2 Factors Concerning Immediate Assignment Success Rate 2.1 Signaling Factors According to the signaling flow, the factors concerning the immediate assignment success rate during each phase are as follows: (1) Random access request phase: whether the small interference signal on the Um interface is regarded as the random access request by the BSC. Affecting factor: Um interface problems; (2) SDCCH assignment phase: whether the SDCCH is available after the random access request is accepted. Affecting factor: SDCCH congestion; (3) Channel activation phase: whether the channel activation is successful after the channel assignment succeeds. Affecting factor: CHAN ACTIV NACK message is received because of equipment faults during SDCCH activation; (4) Immediate assignment command phase: whether the timer for the acknowledgment of the immediate assignment expires. Affecting factor: Um interface problems; (5) Link establishment phase: whether the link can be established on the SDCCH after the immediate assignment command is sent. Affecting factor: MS features. The following analysis is based on these factors. 2.2 Factor Analyzing According to the Definition of the KPI As shown in the previous section, the following four factors are related to immediate assignment success rate: Um interface problems, SDCCH congestion, reception of 2014-6-18 Huawei Technologies Proprietary Page 9 of 34
  • 10. GSGSM BSS Network KPI (Immediate Assignment Success Rate) Optimization Manual INTERNAL CHAN ACTIV NACK because of equipment faults during SDCCH activation, MS problems. These factors are related to the definition of the KPI. There are three formulae that can define the immediate assignment success rate, the mapping between formulae and factors are as follows: Table 1 Mapping between formulae and factors Formula Affecting Factor Um interface problems Reception of CHAN ACTIV NACK because of equipment faults during SDCCH activation SDCCH congestion MS problems Immediate Assignment Success Rate = (Successful Immediate Assignments/Immediate Assignment Requests) x 100% √ √ √ √ Immediate Assignment Success Rate = (Successful Immediate Assignments/ (Immediate Assignment Requests - (Immediate Assignment Commands - Successful Immediate Assignments))) x 100%   √ √   Immediate Assignment Success Rate = (Successful Immediate Assignments/Immediate Assignment Commands) x 100% √     √ 2014-6-18 Huawei Technologies Proprietary Page 10 of 34
  • 11. GSGSM BSS Network KPI (Immediate Assignment Success Rate) Optimization Manual INTERNAL 2.3 Factors Analysis 2.3.1 Equipment Faults 2.3.1.1 Low Immediate Assignment Success Rate Caused by TRX Faults Generally, reception of CHAN ACTIV NACK during the SDCCH activation is caused by equipment faults. If one TRX fails in the cell configured with multiple TRXs, the immediate assignment may fail or the SDCCH may be congested. If you are sure that the fault lies in a TRX, replace the faulty TRX. Otherwise, check the cables in the antenna system and the VSWR. If the cables are properly connected and the VSWR is normal, you need to replace the TRX, and then check whether services are normal again. 2.3.2 Um Interface Problems 2.3.2.1 Mistakenly Regarding Interference as Random Access Request The BTS may mistakenly regard the interference on the Um interface as the random access signal. This may lead to immediate assignment failure or SDCCH congestion. In this situation, the interference problem should be solved. 2.3.2.2 Channel Immediate Assignment Failure Caused by Coverage Difference Between BCCH TRX and non-BCCH TRX In a cell configured with six or more than six TRXs, the combination losses of the BCCH TRX and non-BCCH TRXs are different, leading to coverage difference. If the SDCCH is configured on the non-BCCH TRX, a call that is far away from the serving cell may fail to access the SDCCH when it is assigned to the non-BCCH TRX. Thus, the call drop may occur. 2.3.3 SDCCH Congestion 2.3.3.1 SDCCH Congestion Caused by Heavy Traffic For SDCCH congestion caused by heavy traffic, capacity expansion is necessary. You can also check the parameters concerning location update and SDCCH dynamic 2014-6-18 Huawei Technologies Proprietary Page 11 of 34
  • 12. GSGSM BSS Network KPI (Immediate Assignment Success Rate) Optimization Manual INTERNAL configuration. For SDCCH congestion caused by traffic burst, such as group sending of short messages and location update at the portal of a tunnel, the problem cannot be completely solved. You can, however, alleviate the congestion by enabling the functions such as SDCCH dynamic adjustment. 2.3.3.2 Congestion Caused by Inappropriate Data Configuration ① Location area planning: a reasonable location area plan can help alleviate the SDCCH congestion. ② Dynamic SDCCH assignment: the dynamic SDCCH assignment can help alleviate SDCCH congestion. ③ Dual-band network: a reasonable setting of dual-band network parameters (for example, CRO, CBA, CBQ, and Cell Reselection Hysteresis) can help alleviate SDCCH congestion. ④ Check whether the settings of related timers (such as T3101, T3122, T3212, and T3111) are reasonable. 2.3.4 MS Problems In some cases, the location updates performed by the MS are abnormal, leading to a low immediate assignment success rate. These MSs fail to establish a link on the SDCCH after sending the channel request, causing a low immediate assignment success rate. For the detailed analyzing method and case study, see case 4 in section 3. 3 Method of Analyzing the Problem of Low Immediate Assignment Success Rate 3.1 Process of Analyzing the Problem of Low Immediate Assignment Success Rate When the immediate assignment success rate becomes low, you should firstly check 2014-6-18 Huawei Technologies Proprietary Page 12 of 34
  • 13. GSGSM BSS Network KPI (Immediate Assignment Success Rate) Optimization Manual INTERNAL the range in which the problem exists, and then find out the factors related to the problem according to KPI statistical formulae. For details, see section 2.2 "Factor Analyzing According to the Definition of the KPI". In the case of recommended formula, the general process of analyzing the problem is as follows: Start Analysis of low immediate assignment success rate Check number of SDCCH activation failures/timeout Check SDCCH availablity Check TRX availability and TRX alarm TRX fault or transmission failure Idle interference band/signaling analysis TRX receive level and quality analysis RACH overload times Solve Interferenc e problem SDCCH seizure success rate (locationupdate) Check timers related to location update Check SDCCH dynamic configuration Traffic volume per SDCCH exceeds paln SDCCH and TCH traffic volume analysis Incoming and outgoing handovers of the cell Replan the location areas No Insufficient system capacity? Abnorma l Normal Hardware expansion Equipmen t fault? Um interface fault? Ye s Yes No Ye s Problem solved? Yes End Find cells with low immediate assignment success rate MS fault? Analyze signaling and traffic statistics of cells with problem Enable CBA of the cell For swapped network, check whether the problem exists in ventor's network No Locate problem and submit report 2014-6-18 Huawei Technologies Proprietary Page 13 of 34
  • 14. GSGSM BSS Network KPI (Immediate Assignment Success Rate) Optimization Manual INTERNAL Figure 1 Process of analyzing the problem of low immediate assignment success rate 3.2 Method of Solving the Problem of Low Immediate Assignment Success Rate Before analyzing the cause of low immediate assignment success rate, you should find out the difference between the actual immediate assignment success rate and the expected value. You should also find out the influence of the problem and the definition of the specific immediate assignment success rate KPI. 3.2.1 Equipment Faults This part aims to solve TRX or transmission problems. Firstly, you should check TRX Availability in BSC Measurement and SDCCH Availability in SDCCH Measurement. Secondly, you should check the number of times that a NACK message is received or the timer expires during the SDCCH activation. In this way, you can determine whether the problem is caused by board faults. You can also check whether hardware is faulty by viewing BTS alarms or by viewing the hardware state on Site Device Panel of the LMT. You can check the following traffic statistics for reference: Cause BSC Level Cell Level Equipmen t faults BSC Measurement -> Access measurement per BSC -> SDCCH Availability per BSC Configured SDCCHs per BSC Available SDCCHs per BSC Call Measurement -> Channel Activation Measurement per Cell -> SDCCH Connection Measurement per Cell -> CHAN ACTIV NACK Messages Sent by BTS in Immediate Assignment Procedure (SDCCH) Channel Activation Timeouts in Immediate Assignment Procedure (SDCCH) KPI Measurement per Cell -> TCH Availability 3.2.2 Um Interface Problem 3.2.2.1 Mistakenly Regarding Interference as Random Access Requests Interference may cause SDCCH congestion, causing low immediate assignment 2014-6-18 Huawei Technologies Proprietary Page 14 of 34
  • 15. GSGSM BSS Network KPI (Immediate Assignment Success Rate) Optimization Manual INTERNAL success rate. Especially in the areas with a small space between BTSs and dense BCCH frequency planning, the system allocates SDCCH for each signal if a large number of interference signals are received. Thus, the congestion may occur. In this situation, the immediate assignment success rate and paging success rate decrease, and the RACH may be overloaded. You can locate the problems by analyzing the idle interference bands and the TRX receive quality during the call. If the system mistakenly regards the interference as a random access signal and sends an assignment command, the immediate assignment will fail. You can locate the problem by analyzing the Chan Req message. For the SDCCH congestion caused by interference, you can check the following traffic statistics for reference: Cause BSC Level Cell Level TRX Level SDCCH congestion caused by interference BSC Measurement -> Access measurement per BSC -> Random Access Success Ratio per BSC Call Measurement -> Flow Control Measurement per Cell -> MSG CCCH LOAD IND (RACH) Messages Sent on Abis Interface MR Measurement -> Analyzed Measurement of Interference Band per TRX Receive Quality Measurement per TRX For the problem of mistakenly regarding interference as random access requests, you can locate the problem by performing signaling analysis on the Abis interface of the cell with worst performance. If the signaling analysis result shows that the random access signals are all from far away, for example, the values of TA are higher than 10, sometimes even higher than 20, and the levels are lower than -100 dBm, the random access success rate is high and the immediate assignment success rate is low, you can infer that the signals are interference. To restrict the access of interference, reduce MAX TA and increase RACH Min Access Level. You can check the following traffic statistics for reference: Cause BSC Level Cell Level Mistakenly Access of Interference on the BSC Measurement -> Access measurement per BSC -> Random Access Success Ratio Call Measurement -> Immediate Assignment Measurement per Cell -> Immediate Assignment Analyzed Measurement per Cell -> Call Setup 2014-6-18 Huawei Technologies Proprietary Page 15 of 34
  • 16. GSGSM BSS Network KPI (Immediate Assignment Success Rate) Optimization Manual INTERNAL SDCCH per BSC Indications Timed Out Call Measurement -> Immediate Assignment Measurement per Cell -> Immediate Assignment Analyzed Measurement per Cell -> Success Rate of Random Access Figure 2 shows the contents of a channel required message. Figure 2 Channel request signaling Information element description: 1. The meaning of Random Access Information (8bits) is as follows: 2014-6-18 Huawei Technologies Proprietary Page 16 of 34
  • 17. GSGSM BSS Network KPI (Immediate Assignment Success Rate) Optimization Manual INTERNAL Table 9.9/3GPP TS 04.08: CHANNEL REQUEST message content MS codes According to Establishment cause: bits 8 .... 1 101xxxxx Emergency call 110xxxxx Call re-establishment; TCH/F was in use, or TCH/H was in use but the network does not set NECI bit to 1 011010xx Call re-establishment; TCH/H was in use and the network sets NECI bit to 1 011011xx Call re-establishment; TCH/H + TCH/H was in use and the network sets NECI bit to 1 100xxxxx Answer to paging 0010xxxx 0011xxxx See table 9.9a/3GPP TS 04.08 0001xxxx 111xxxxx Originating call and TCH/F is needed, or originating call and the network does not set NECI bit to 1, or procedures that can be completed with a SDCCH and the network does not set NECI bit to 1. note 1 0100xxxx Originating speech call from dual-rate mobile station when TCH/H is sufficient and supported by the MS for speech calls and the network sets NECI bit to 1 note 5 0101xxxx Originating data call from dual-rate mobile station when TCH/H is sufficient and supported by the MS for data calls and the network sets NECI bit to 1 note 5 000xxxxx Location updating and the network does not set NECI bit to 1 0000xxxx Location updating and the network sets NECI bit to 1 0001xxxx Other procedures which can be completed with note 1 an SDCCH and the network sets NECI bit to 1 011110xx One phase packet access with request for single timeslot uplink 01111x0x transmission; one PDCH is needed. 01111xx0 01110xxx Single block packet access; one block period on a PDCH is needed for two phase packet access or other RR signalling purpose. 2014-6-18 Huawei Technologies Proprietary Page 17 of 34
  • 18. GSGSM BSS Network KPI (Immediate Assignment Success Rate) Optimization Manual INTERNAL 01100111 LMU establishment note 2 01100xx0 Reserved for future use 01100x01 01100011 note 2a 01111111 Reserved for future use. note 2b NOTE 1: Examples of these procedures are: IMSI detach, Short Message Service (SMS), Supplementary Service management, Location Services. NOTE 2: If such messages are received by a network, an SDCCH shall be allocated. NOTE 2a: If such messages are received by a network, an SDCCH may be allocated. NOTE 2b: This value shall not be used by the mobile station on RACH. If such message is received by the network, it may be ignored. 2. The value of Access Delay indicates the TA. 3. Bits 13, 14, 15, and 16 indicate the RACH level and the number of error bits in the training sequence. In this example, the value of bit 13 is 43. This indicates that the bits followed indicate the AB access level and the number of error bits in the training sequence. The value of bit 14 is 2. This indicates that the following two bits indicate the AB access level and the number of error bits in the training sequence. The value of bit 15 indicates the RACH level (39 – 120 = –81 dBm). 3.2.2.2 Coverage Difference If the combination mode of the BCCH TRX and the non-BCCH TRX is different, or the losses are inconsistent because of different transmit power or other problems, the assignment on the non-BCCH TRX may fail. The causes can be classified into three types: ① The transmit power of TRXs in the same cell is different. If concentric cell technology is not applied, the power of different TRXs on the antenna input port is different because of different uplink losses. This causes inter-TRX coverage difference. Thus, assignment failure may occur. To solve this problem, check whether the combiner, divider, CDU, or SCU is properly connected. ② Multiple antennae are installed in a cell. When multiple antennae are installed in a cell, the coverage differences of the 2014-6-18 Huawei Technologies Proprietary Page 18 of 34
  • 19. GSGSM BSS Network KPI (Immediate Assignment Success Rate) Optimization Manual INTERNAL antennae may cause assignment failure. You can solve this problem through engineering adjustment. ③ The transmit and receive antennae are not on the same horizontal plane or their tilts are not the same. You can solve this problem by adjusting the antennae. 3.2.3 System Capacity (Congestion) Analysis 3.2.3.1 Congestion Caused by Heavy Traffic on the SDCCH Generally, heavy traffic on the SDCCH is caused by frequent location updates. You can check the rate of the SDCCH being occupied by querying the counter Channel Requests (Location Updating) and the total number of channel requests. Figure 3 shows the ratios of different kinds of SDCCH requests to the total number of SDCCH requests on Shanghai Unicom when the traffic is heavy. If the ratios are high, check the location area planning and the drive test result. If the edges of location areas are configured in the area with heavy traffic, reconfigure the location areas. In addition, you can adjust the CHR parameters to reduce location updates. For details, see Case 1. If the SDCCH congestion rate is high (greater than 5%), the traffic volume on each SDCCH may have exceeded the limit as planned. You should check the configuration of the location update and SDCCH dynamic configuration parameters. If the settings of parameters are reasonable, a hardware capacity expansion is required. If the congestion rate and traffic volume of the SDCCH are high, but the traffic volume of the TCH is normal, the SDCCH congestion may be caused by burst traffic. For the sites along the railway, especially for these near the tunnel portal, the capacity configured is generally small. When a train passes through or stops, a large number of location updates occur, which finally lead to SDCCH congestion. In addition, during the period when the volume of short messages is large, SDCCH congestion may occur. This problem cannot be completely solved, but you can take some measures to alleviate the congestion. For example, configure more SDCCHs, or enable the dynamic conversion between the SDCCH and TCH. For details, see Case 2. 2014-6-18 Huawei Technologies Proprietary Page 19 of 34
  • 20. GSGSM BSS Network KPI (Immediate Assignment Success Rate) Optimization Manual INTERNAL For the configuration of related parameters, see section 3.2.3.2 "Congestion Caused by Inappropriate Parameter Configuration". You can check the following traffic statistics for reference: Cause BSC Level Cell Level Congestion caused by heavy traffic on the SDCCH BSC Measurement -> Access measurement per BSC -> Congestion Ratio on SDCCH per BSC Call Measurement -> Immediate Assignment Measurement per Cell -> Channel Requests per Cell -> Channel Requests (MOC), Channel Requests (MTC), Channel Requests (Emergency Call), Channel Requests (Call Re-establishment), Channel Requests (Location Updating), Channel Requests (Packet Call), Channel Requests (LMU+Reserved), Channel Requests (Protocol Incompatible) KPI Measurement per Cell -> SDCCH Traffic Volume, SDCCH Seizure Requests, Failed SDCCH Seizures due to Busy SDCCH Figure 3 shows the ratios of different kinds of SDCCH requests to the total number of SDCCH requests on Shanghai Unicom when the traffic is heavy: Rat i os of Di f f er ent Ki nds of SDCCH Request s t o t he Tot al Number of SDCCH Request s on Shanghai Uni com when t he Tr af f i c i s Heavy 12. 538% 9. 309% 0. 055% 0. 030% 31. 059% 47. 003% 0. 001% 0. 006% 0. 000% 5. 000% 10. 000% 15. 000% 20. 000% 25. 000% 30. 000% 35. 000% 40. 000% 45. 000% 50. 000% A300A:Number ofSDCCH requests (mobile originated call) A300C:Number ofSDCCH requests (mobile terminated call) A300D:Number ofSDCCH requests (emergency call) A300E:Number ofSDCCH requests(call re- establishment) A300F:Number ofSDCCH requests (location updating) A300H:Number ofSDCCH requests (packetcall) A300I:Number ofSDCCH requests(LMU+ Reserved) A300K:Number ofSDCCH requests (protocol incompatible) Rat i os of di f f er ent ki nds of SDCCH r equest s Figure 3 Ratios of different kinds of SDCCH requests to the total number of SDCCH requests on Shanghai Unicom when the traffic is heavy Congestion Caused by Inappropriate Parameter Configuration An inappropriate parameter configuration may lead to the SDCCH congestion. The parameters related to SDCCH congestion and their configurations are as 2014-6-18 Huawei Technologies Proprietary Page 20 of 34
  • 21. GSGSM BSS Network KPI (Immediate Assignment Success Rate) Optimization Manual INTERNAL follows: 1. CRO: Generally, it is recommended that an MS should not camp on a cell with high traffic volume or low QoS. The parameters of such cells should be set as follows: firstly, set PT to 31, so that TO becomes invalid. Secondly, set C2 to the same value as CRO subtracted from C1 so that the value of C2 is reduced and thus the possibility of reselecting this cell is reduced. In addition, network operators can set the CRO according to the actual conditions. The greater the CRO is, the more difficult it is for an MS to access the cell. 2. Cell Reselection Hysteresis (CRH): This parameter is used to determine whether cell reselection is performed between different location areas. This parameter can prevent frequent location update, thus minimize the possibility of losing paging messages. Generally, this parameter is set to 6 dB. For dual-band networks in urban areas not sharing the location areas, this parameter is set to 8–10 dB.  If the traffic volume in an area is high, and signaling overload occurs frequently, it is recommend that you set the CRH of the neighboring cells belong to different LACs under this area to a larger value.  If the overlapping area of the neighbor cells under different location areas is large, it is recommended that you set the CRH of the cells to a larger value.  If some areas between two neighbor cells under different location areas have poor coverage, or if most of the MSs in the area (such as highways) move at a high speed, it is recommended that you set the CRH of the cells to 2–6 dB. 3. Set the parameters related to SDCCH dynamic adjustment as follows: Parameter Description SDCCH Dynamic Allocation Allowed If this parameter is set to YES, the dynamic conversion between the SDCCH and the TCH is enabled. Idle SDCCH Threshold N1 According to the channel assignment algorithm, when the number of idle SDCCHs in the cell is smaller than or equal to the value of this parameter, the system 2014-6-18 Huawei Technologies Proprietary Page 21 of 34
  • 22. GSGSM BSS Network KPI (Immediate Assignment Success Rate) Optimization Manual INTERNAL tries to find a TCHF that can be converted into an SDCCH. This parameter is one of the conditions for the dynamic conversion from TCHF to SDCCH. Cell SDCCH Channel Maximum According to the channel assignment algorithm, the system determines whether the number of SDCCHs in the cell after the conversion exceeds the value of Cell SDCCH Channel Maximum before initiating the dynamic conversion from TCH to SDCCH. If yes, the conversion is not initiated. TCH Minimum Recovery Time(s) This parameter specifies the minimum time for the recovery of a TCH from the SDCCH. 4. Related timers and their recommended configurations are as follows:  T3101: This timer is used for immediate assignment procedure monitoring. Reduce the value of this parameter properly to minimize the congestion caused by dual assignment of the SDCCH. If the length of this timer is too long, the invalid usage of signaling resources is increased. To enhance the usage of the signaling resources, you should shorten the length of this timer, especially when the queuing function is enabled.  T3122: This timer is started by the MS when the MS receives the IMMEDIATE ASSIGN REJECT message. The MS can send a new channel request message only after T3122 expires. If the length of T3122 is too short, the MS may send the channel request message frequently when no system resources are available. This increases the load on the RACH and CCCH.  T3212: This timer is used for the periodic location update. Increase the length of this timer properly to reduce the load on the SDCCH brought by periodic location update.  T3111: This timer delays the deactivation of channels after main signaling links are disconnected to reserve time for repeated link disconnection. T3111 is started during the disconnection of both TCH and SDCCH. The value of T3111 must be the same as the value of T3110 at the MS side. Generally, they are set 2014-6-18 Huawei Technologies Proprietary Page 22 of 34
  • 23. GSGSM BSS Network KPI (Immediate Assignment Success Rate) Optimization Manual INTERNAL to 2 seconds. If the length of T3111 is too long, the SDCCH congestion rate is increased. 5. RACH Min Access Level: If the value of this parameter is too small, much interference may access the network, thus leading to SDCCH congestion. If the value of this parameter is too large, it is probable that MSs cannot make the call even though the signal level is high. This parameter should be set on the basis of the actual receiver sensitivity of the BTS, the minimum access level of the MS, and the interference condition. 6. Late assignment: This function is set at the MSC side. If this function is enabled, the call is on the SDCCH before the called MS answers. This prolongs the time when the SDCCH is occupied and thus may cause SDCCH congestion. 7. RXLEV_ACCESS_MIN: If this level is too low, a large number of MSs may access the network, and SDCCH congestion may occur during call initiation or location update. In addition, interference signal may be mistakenly regarded as the random access signals. For details, see Case 3. 8. Tx-integer: When the network traffic is heavy, the success rate of immediate assignment is low if the sum of S and T is small. Thus, the value of T should be properly adjusted to make the sum of S and T greater. For details about the value of S, see the description of Tx-integer. 9. Cell Bar Access (CBA): 0: cell access allowed; 1: cell access prohibited. Together with CBQ, CBA determines the priority of a cell. For details, see the GSM 04.08 protocol. CBQ CBA Cell Selection Priority Cell Reselection Priority 0 0 Normal Normal 0 1 Prohibited Prohibited 1 0 Low Normal 1 1 Low Normal 2014-6-18 Huawei Technologies Proprietary Page 23 of 34
  • 24. GSGSM BSS Network KPI (Immediate Assignment Success Rate) Optimization Manual INTERNAL 10. Cell Bar Qualify (CBQ): CBQ takes effect during cell selection rather than cell reselection. 3.2.4 MS Problem Analysis 3.2.4.1 Checking the Problem Symptoms Objective: to check the problems that exist on site and solve the problems caused by poor air interface quality and incorrect parameter settings. The symptoms are listed as follows: Symptom 1: The number of failed SDCCH seizures due to timeout is almost equal to the number of location updating requests minus the number of link establishment indications for location updating. Symptom 2: The problem happens discontinuously during both busy hours and idle hours. Symptom 3: The call service is normal. Except for low immediate assignment success rate in a few cells during certain periods, the KPIs and drive test result are normal, and no call drop complaint is received. Because when an MS fails in location update, it may try to access other cells or try to access the cell again periodically. Symptom 4: No interference and no cells with the same BCCH frequency and BSIC exist. Symptom 5: No abnormality such as uplink-downlink imbalance exists. Symptom 6: The result of signaling analysis on the Abis interface shows that the number of request retransmissions and the retransmission interval of the failed location updates meet the configuration requirements. If all the previous symptoms exist, you can infer that the problem is low immediate assignment success rate caused by abnormal location update. 3.2.4.2 Problem Handling As the problem of low immediate assignment success rate is caused by some MSs, and the MSs cannot be located because no layer-3 information is provided in location update procedure, this problem cannot be solved on the network side currently. To improve the user satisfaction, do as follows: 2014-6-18 Huawei Technologies Proprietary Page 24 of 34
  • 25. GSGSM BSS Network KPI (Immediate Assignment Success Rate) Optimization Manual INTERNAL (1) Reduce the impact of abnormal MS location updates on the network KPIs. (2) Communicate thoroughly with customers. Problem handling: If any of the previous six symptoms does not exist, initiate the procedures for network optimization and troubleshooting. To perform network optimization according to the RSL signaling, do as follows: 1. If the value of TA in the location update signaling is high and the access level is low during the time when the problem exists, do as follows:  Adjust the following parameters: Max TA, RACH Min Access Level, and Tx- integer (increase S and T).  Increase the length of the following timers: T3101, T3122, T3212, and T3111.  Adjust the cell selection priority by setting the value of CBA and CBQ. 2. For the sites located on the edge of location areas, do as follows to optimize the location update strategy: Adjust the parameter Cell Reselection Hysteresis and adjust the cell selection priority by setting the value of CBA and CBQ. 3. Reduce the MS retransmission times (recommended value: 1) and reduce the impact of retransmission on the network KPIs. Data analysis: 1. For the analysis report of problem location, see the following attachment. Analysis on Low Immediate Assignment Success Rate Caused by Abnormal MS Location Update-qiuwenfang.rar Based on the previous analysis, we find that the channel requests received when the problem occurred were sent by some abnormal MSs, and the BTS responded and handled the requests correctly. The analysis is based on the uplink and downlink. The details are described as follows: 2. Uplink – channel requests from the MS (1) When the cell access is prohibited, the immediate assignment success rate of the cell becomes normal. This indicates that the abnormal location updates are caused by the MS rather than the interference. (2) The location update requests are with high level, low error rate, and small TA 2014-6-18 Huawei Technologies Proprietary Page 25 of 34
  • 26. GSGSM BSS Network KPI (Immediate Assignment Success Rate) Optimization Manual INTERNAL (except for some sites with wide coverage area). This indicates that the abnormal location updates are initiated by the MS. (3) The number of location update requests sent by an MS complies with the settings of network parameters. This also indicates that the abnormal location updates are initiated by the MS. 3. Downlink – immediate assignment (1) The immediate assignment commands are sent correctly, because the values of T1, T2, and T3 are the same as those in the channel requests. (2) Call access and the supplementary services such as short message are all normal. The problem only exists in the SDCCH access related to location update. This indicates that the immediate assignment commands are sent correctly. 4. Network data comparison (for the swapped offices and the offices with segmental networking) By comparing the data before and after swapping (for swapped offices) and the data of the surrounding cells (for the offices with segmental networking), we find that the problem also exists in the networks of other companies. 4 Test Method Immediate assignment success rate is a traffic measurement counter. As the formulae of this counter in different manufacturers and operators are different currently, you should record the value of other related counters and choose a proper formula according to the actual conditions. 2014-6-18 Huawei Technologies Proprietary Page 26 of 34
  • 27. GSGSM BSS Network KPI (Immediate Assignment Success Rate) Optimization Manual INTERNAL 5 Cases of Immediate Assignment Success Rate Optimization 5.1 Case 1: Decrease in Immediate Assignment Success Rate Because of SDCCH Congestion Caused by Incorrect LAC Setting Problem description The SDCCH congestion rate of cell 2 in S1/1/1 configuration was higher than 8%, and the immediate assignment success rate of that cell was 90%. Cause analysis and handling (1) The measurement counters of the TCH and SDCCH shows that the traffic volume on the TCH is low, and the traffic volume per cell in busy hours is lower than 2.2 Erl; however, there are many SDCCH seizure requests (3032 in busy hours), the traffic volume on the SDCCH is 1.86 Erl, and the congestion rate is higher than 8%. (2) The SDCCH is mainly occupied by the signaling before the call is established, the signaling during handover, the signaling for location update in idle mode, and the short messages. (3) As the traffic volume on the TCH, the number of TCH seizure requests (318), and the number of handover requests (146) are all normal, we infer that the high SDCCH seizure rate may be caused by too frequent location updates or too many short messages. (4) The LAC of the cell is 0500, but the LACs of other cells around this cell are all 0520. After the LAC of the cell is changed to 0520, the number of SDCCH seizure requests becomes 298, the traffic volume on the SDCCH becomes 0.27 Erl, the congestion rate decreases to 0, and the immediate assignment success rate reaches up to 95%. 2014-6-18 Huawei Technologies Proprietary Page 27 of 34
  • 28. GSGSM BSS Network KPI (Immediate Assignment Success Rate) Optimization Manual INTERNAL 5.2 Case 2: SDCCH Congestion Caused by a Burst of Location Updates Problem description The immediate assignment success rate was low in a local network. Traffic statistics showed that the problem was mainly caused by SDCCH congestion on some sites. Cause analysis and handling (1) Traffic statistics shows that the SDCCH is occupied for 300 to 400 times in busy hours. The congested cells are all in S1/1/1 configuration and each cell is configured with eight SDCCHs/8. In normal conditions, 300 to 400 times of SDCCH seizures are acceptable, but SDCCH congestion happens for tens of times in each cell. (2) Traffic statistics show that most of the SDCCH seizures are caused by location update. As most of the congested BTSs are located in the intersection areas of two location areas along the railway, we doubt that the SDCCH congestion may be caused by a burst of location updates. (3) After checking the five-minute traffic statistics, we find that most of the location updates happened within a certain period of five minutes. The train timetable shows that four or five trains had passed within that five minutes. When the trains passed, a burst of location updates were performed during a short period of time, thus, the congestion happened. (4) For the BTSs located in the intersection areas of two location areas along the railway, it is recommended that the SDCCH dynamic assignment function be enabled and adequate SDCCHs be configured. 5.3 Case 3: Low Assignment Success Rate Because the RACH Minimum Access Level Is Set to 0 Problem description Subscribers of the cells controlled by a certain BSC complained that the success rate of random access was low. 2014-6-18 Huawei Technologies Proprietary Page 28 of 34
  • 29. GSGSM BSS Network KPI (Immediate Assignment Success Rate) Optimization Manual INTERNAL Cause analysis and handling: (1) The clock status of the BTSs are normal. (2) The value of parameter Tx-integer (RACH Timeslot) is normal. By analyzing the data and traffic statistics, we find that the parameter RACH Min Access Level of all the cells with low assignment success rate is set to 0. The immediate assignment success rates of cells whose RACH Min Access Level are set to 1, 3, or 5, however, are around 99%. According to the previous data, we infer that the problem is caused by mistaken access. (3) If RACH Min Access Level is set to 0, there is no restriction on the random access; If RACH Min Access Level is set to 1, a call can access the cell only when the level is higher than –109 dBm. In Shantou Unicom, the RACH Min Access Level of most of the cells is set to 0 to improve the paging success rate. This causes a great number of mistaken access and finally causes low assignment access rate. In addition, the parameter Random Access Error Threshold also has error restrictions on the access signals. (4) When RACH Min Access Level and Random Access Error Threshold of all the cells in module 1 of the BSC in Shantou Unicom are set to different values, the results are as follows:  When Random Access Error Threshold and RACH Min Access Level are set to 200 and 1 respectively, the mean immediate assignment success rate of all the cells is 97.9% an hour later;  When Random Access Error Threshold and RACH Min Access Level are set to 200 and 0 respectively, the mean immediate assignment success rate of all the cells is 91.92% an hour later;  When Random Access Error Threshold and RACH Min Access Level are set to 180 and 1 respectively, the mean immediate assignment success rate of all the cells is 97.24% three hours later. After discussing with the customer, we decide to set Random Access Error 2014-6-18 Huawei Technologies Proprietary Page 29 of 34
  • 30. GSGSM BSS Network KPI (Immediate Assignment Success Rate) Optimization Manual INTERNAL Threshold and RACH Min Access Level of all the cells to 180 and 3 respectively. In this way, mean immediate assignment success rate of all the cells is higher than 98.6%. 5.4 Case 4: Low Immediate Assignment Success Rate in Some Cells Because of MS Error Problem description The personnel on site reported that the immediate assignment success rate of some cells was low. Cause analysis and handling (1) As the problem exists only in some cells, it may be caused by the MS error. (2) Traffic statistics of the cells with the problem show that the number of link establishing failures during location updates is approximately equal to the number of times that the setup indication timer expires, as shown in the following figure. This indicates that the SDCCH setup failure is mainly caused by location updates. (3) The signaling of the cells with problem shows that generally the value of TA is 2014-6-18 Huawei Technologies Proprietary Page 30 of 34
  • 31. GSGSM BSS Network KPI (Immediate Assignment Success Rate) Optimization Manual INTERNAL small and the level is high. This indicates that the problem is not caused by interference. But after the BSS sends the immediate assignment command and waits for the MS to access, the uplink signal strength detected by the BTS is always lower than –110 dBm. This indicates that the MS does not report the link establishing indication and thus causing the immediate assignment failure. In addition, we check whether location updates are initiated by a same MS and whether the number of location updates is in compliance with the network setting. The following figure shows the signaling captured in the local network. As can be seen, the location updates are mainly initiated by a same MS and the maximum number of retransmissions of the location update request set on the network is five. 2014-6-18 Huawei Technologies Proprietary Page 31 of 34
  • 32. GSGSM BSS Network KPI (Immediate Assignment Success Rate) Optimization Manual INTERNAL The parameters associated to channel request are configured as follows: (4) Cell bar access (CBA) status modification test. After the CBA of a cell is enabled, the system information of the cell will carry a flag bit. The MSs that receive such system information will not consider that cell during cell reselection, and the number of location update requests to the neighboring cells increases. After the CBA is enabled, the immediate assignment KPIs become better, as shown 2014-6-18 Huawei Technologies Proprietary Page 32 of 34
  • 33. GSGSM BSS Network KPI (Immediate Assignment Success Rate) Optimization Manual INTERNAL in the following figure. (5) For a swapping project, check whether the problem exists in the network before swapping. If the problem existed, then we can infer that the problem is mainly related to the MS. 6 Onsite Information that Needs to Be Obtained 1. Traffic statistics of the network during one week before and after the problem occurred. BSC32: (1) All the counters of the Access Capability Measurement 1 and Access Capability Measurement 2 in BSC Overall Performance Measurement; (2) All the counters of Receive Quality Performance Measurement; (3) All the counters of the SDCCH Assignment Performance Measurement and TCH Assignment Performance Measurement in Channel Assignment Performance Measurement; (4) All the counters of SDCCH Performance Measurement, TCH Performance Measurement, and Random Access Performance Measurement in Cell Performance Measurement. BSC6000: 2014-6-18 Huawei Technologies Proprietary Page 33 of 34
  • 34. GSGSM BSS Network KPI (Immediate Assignment Success Rate) Optimization Manual INTERNAL (1) All the counters of Access Measurement per BSC in BSC Measurement; (2) All the counters of Interference Band Measurement per TRX and Receive Quality Measurement per TRX in MR Measurement; (3) All the counters of Channel Configuration Measurement per Cell in Channel Measurement; (4) All the counters of KPI Measurement per Cell, Immediate Assignment Measurement per Cell, and Flow Control Measurement per Cell in Call Measurement. 2. Data configuration and OMC data operation logs before and after the problem occurred. 3. Data configuration file and engineering parameters table. 4. Whether the network optimization operations, such as antenna adjustment, frequency adjustment, and location area adjustment, are performed after the problem occurred. 5. Alarms generated before and after the problem occurred, including commissioning alarms. 2014-6-18 Huawei Technologies Proprietary Page 34 of 34