We measure it.Reference flue gas analyzertesto 360 – Portable referenceanalyzer for industrial flue gases                 ...
testo 360                                                                                            We measure it.Referen...
testo 360                                                                                          We measure it.testo 360...
testo 360                                                                                                                 ...
testo 360                                                                                                            We me...
testo 360                                                                                                                W...
testo 360                                                                                                                 ...
testo 360                                                                                                            We me...
testo 360                                                                                                    We measure it...
testo 360                                                                                         We measure it.Pitot tube...
testo 360                                                                                                          We meas...
testo 360                     We measure it.Reference flue gas analyzer                                               Subj...
Upcoming SlideShare
Loading in …5
×

Testo 360 datasheet 2012

657 views

Published on

Published in: Technology, Business
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
657
On SlideShare
0
From Embeds
0
Number of Embeds
1
Actions
Shares
0
Downloads
5
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Testo 360 datasheet 2012

  1. 1. We measure it.Reference flue gas analyzertesto 360 – Portable referenceanalyzer for industrial flue gases O2 NO NO 2 NOx SO 2 CO 2 %H 2 O
  2. 2. testo 360 We measure it.Reference flue gas analyzer • Accuracy fully compatible to stationary measurement testo 360-3 technology • Tested for suitability for all systems according to TA-air, testo 360 flue gas analyzer, approved, 13. and 17. BImSchV without notebook, fitted with O2 gas sensor, gas preparation, housing heating • Possible measurement parameters: O2, CO, NO, NO2, CO2 (NDIR), CxHy, %H2O • Measurement of water content of the flue gas, flow Part no. 0563 3600 velocity, differential pressure and temperature • Long-term stable sensor, no test gas necessary at measurement siteA notebook is required for the operation of the testo 360! • Integrated low-absorbtion Peltier measurement gas preparation (patemted) • Applicable under extreme ambient conditionsOfficial emission measurements of industrial flue gases (e.g. Germanysingle measurement according to § 26, 28 BlmSchG) are The approval for long-term emission measurements wasideally carried out today using a compact, portable measu- carried out by RWTÜV Anlagentechnik GmbH in Essen,ring instrument of robust design. The advantage: easy Germany. The NO, NO2, SO2, CO and O2 components weretransport in a car and a considerable reduction of effort. tested. Unlimited approval of testo 360 for use on TA LuftThe object of the monitoring of thermal processes is to systems was confirmed.maintain or improve product quality. Extreme conditions,such as high gas concentrations, dust contamination, high USAambient temperatures and necessary long-term measure- testo 360 meets US EPA´s Performance Specifications forments, are often encountered. measuring NOX, CO and O2. Also fulfills CTM-030 and –034In emission tests, the testo 360 is able to record even ex- as well as US EPAs 40 CFR, Part 60, App. A and B and Parttreme values, and in addition to this, to withstand high am- 75 Subpart C. (testo 360 is also approved by Californiabient temperatures and radiation heat, thanks to a switcha- South Coast Air Quality Management District for measuringble measuring range extension. NOX.)In the servicing of industrial combustion systems, serialmeasurements require not only extreme accuracy from por- Russiatable multi-function measuring instruments, but also a ro- testo 360 has GOS standard approval for all parameters.bust design for long-term measurements for the purposesof the optimum adjustment of burners. Further demands area high level of reliability and low follow-on costs. The testo Switzerland360 additionally offers a data logger function over several testo 360 is approved by BUWAL for official emissiondays or weeks, as well as a maintenance-friendly set-up. measurements. If you require support when commissioning, we will be happy to make you an individual offer.
  3. 3. testo 360 We measure it.testo 360 system overview Printout Files Telephone modem O2, CO, NOx, SO2 ∆P, mbar Notebook m/s, t/y Analyser box Test gasDesign and Function Operation and AnalysisThe testo 360 reference measuring system consists of an The notebook is protected from ambient influences duringanalyser unit, a notebook and the flue gas probe. All of the long-term measurements by the lid which can be locked.sensors (max. 7 gas sensors), the flue gas moisture Measurements are taken using WINDOWS® software. Themeasurement unit (optional), the measuring range extension measured data is saved as ASCII on the notebook’s hardunit (gas dilution, optional) velocity measurement (optional) disk and can be integrated into any analysis program. Theas well as a low absorption gas preparation Peltier cooling analyser can be operated and data can be transmitted viaunit are located in the analyser. The flue gas probe is telephone modem or computer network.connected to the heated hose with integrated filter: eitherthe modular industrial probe or any non-Testo or special Continuous measurementsprobes via an adapter. For the purpose of accuracy testing, test gas can be supplied directly to the instrument via a test gas inputHandling (option).testo 360 is easily transported by the operator. The fold-uptrolley on which the analyser is placed when working is Maintenance and Serviceideal for this purpose. testo 360 has been designed so that the user can easily change the sensors – also without calibration gases.
  4. 4. testo 360 We measure it.Technical dataGeneral measuring rangesIn testo 360 the measuring range end value is determined by the choice of test gases. Example: CO desired measuring range up to 300 ppm => testgas concentration approx. 240-260 ppm (approx. 80 % of measuring range end value). However, the recording of measurement values over themeasuring range thus defined is possible. Parameter Greatest measuring Greatest measuring range Permitted accuracy Accuracy achieved in the range with measuring range at 6 m gas path 1) test DIN 33962 1) extension O2 0 to +21 Vol. % O2 0 to 21 Vol. % O2 á 5% of MR end value ≤ 1.2 % of MR end value NO 0 to +3000 ppm NO 0.1 to 6.0 Vol. % NO á 5% of MR end value ≤ 2.8 % of MR end value 0 to +6160 mg/m³ NO NO2 0 to +500 ppm NO2 0.1 to 1.0 Vol. % NO2 á 5% of MR end value ≤ 1.0 % of MR end value 0 to +1030 mg/m³ NO2 NOx (NO+NO2) 0 to +3500 ppm NOx 0.1 to 7.0 Vol. % NOx á 5% of MR end value ≤ 3.8 % of MR end value 0 to +7190 mg/m³ NOx SO2 0 to +5000 ppm SO2 0.1 to 10.0 Vol. % SO2 á 5% of MR end value ≤ 2.5% of MR end value 0 to +14650 mg/m³ SO2 CO2 0 to +25 Vol. % CO2 0.1 to 100 Vol. % CO2 á 5% of MR end value – with integr. +40 to +1200 hPa +400 to +1200 hPa ≤ ±14 hPa (+40 to – absolute pressure +1200 hPa) measurement CO 0 to +10000 ppm CO 0.1 to 20 Vol. % CO á 5% of MR end value ≤ 2.0 % of MR end value* 0 to +12560 mg/m³ CO Exhaust gas +2 to +31 %H2O – ≤ 4 Vol. % H2O absolute – humidity +15 to +70 °C td Temperature FT -40 to +1200 °C – ≤ 0.5 °C (0 to +100 °C) – 0.5% of mv (> 100 °C) Flow velocity +5 to +40 m/s – ≤ 1.5 m/s (at +200 °C FT and – calculated from 0 to +50 hPa 950 hPa (absolute pressure) pressure difference ≤ 0.05 hPa plus 1 % of meas. value*1) All accuracies stated without the option „measuring range extension“. With measuring range extension, a fixed value of ±2 % must be added. Parameter Smallest Largest measuring Accuracy Resolution Min. O2 requirememt in Reaction time HC measuring range range 1) exhaust gas t90 Methane 80 to 3000 ppm to 5 % (= lower explosion á 10 % of MREV 0.001 Vol. % = 2 % + (2 x m.v. methane) 20sec. (explosion threshold) threshold) 10 ppm Propane 80 to 3000 ppm to 2.1 % (= lower á 10 % of MREV 0.001 Vol. % = 2 % + (5 x m.v. propane) 20sec. (explosion threshold) explosion threshold) 10 ppm 80 to 3000 ppm to 1.8 % (= lower á 10 % of MREV 0.001 Vol. % = 2 % + (6.5 x m.v. butane) 20sec. Butane (explosion threshold) explosion threshold) 10 ppm2) Lower explosion limit (LEL) must be observed.3) The HC module is adjusted to methane in the factory. It can be adjusted to another gas by the user.
  5. 5. testo 360 We measure it.Technical dataTechnical data from suitability testsSuitable for the measurement of the parameters below in exhaust Time change during the maintenance intervalgas in systems according to TI air, 13. BImSchV (large furnacesystems) and 17. BImSchV (waste combustion systems).Parameter Max. measuring range Smallest tested Parameter Zero point Reference point acc. to suitability test measuring rangeO2 0 to +21 Vol. % O2 0 to +21 Vol. % O2 CO á 0.1 % á +3.1 %CO 0 to 3750 mg/m³ 0 to 75 mg/m³ SO2 á +0.3 % á -1.1 % 0 to 3000 ppm 0 to 60 ppmNO 0 to 2055 mg/m³ 0 to 300 mg/m³ NO á 0.1 % á 2.0 % 0 to 1000 ppm 0 to 146 ppmNO2 0 to 410 mg/m³ 0 to 100 mg/m³ NO2 á +1.3 % á +1.2 % 0 to 200 ppm 0 to 49 ppmSO2 0 to 4410 mg/m³ 0 to 75 mg/m³ O2 á 0.02 Vol. % á 0.02 Vol. % 0 to 1500 ppm 0 to 26 ppmAvailability: 96.1 % for all componentsMaintenance interval: 14 days (in constant operation)Proof limit: (mean values, of display ranges) CO: 0.92 %, NO2: 0.04 % 02: 0.01 Vol %, NO: 0.24 %, SO2: 2.1 %Influence of barometric air pressure changes on the measurement signalTest gas flow: no influencePermitted ambient temperature: -20 °C to +50 °CTemperature dependency of zero point: 0%Temperature dependency of sensitivity: maximum 2.8 %Time change of zero point and sensitivity: á2 % of target valueAdjustment time t90: maximum 30 secondsCross-sensitivity (to CO2, NO, NO2, HCL, SO2, CH4, NH3and H2O in percent of display range): á 1.3 % readingDiscrepancy of current/target value of instrument characteristic curve: á2 % displ. range, max. 0.13 Vol. % O2Reproduceability: NO: R = 56; SO2: R = 92 (70*) O2: R = 434; NO2: R = 81; CO: 111 (69*)* Note: Measuring range 17. BlmSchV
  6. 6. testo 360 We measure it.Options / Software Options Part no. Option NO-sensor, 0 to 3000 ppm, resolution 1 ppm 0440 0068 Option CO2 IR-sensor, incl.absolute pressure measurement 0 to 5 Vol.% 0440 0084 Option CxHy sensor, methane 80 to 3000 ppm, propane 80...3000 ppm, butane 80 to 3000 ppm; resolution 10 ppm; 0440 0099 Pellistor is adjusted to methane in the factory. Option NO2-sensor, 0 to 500 ppm 0440 0069 Option SO2-sensor, 0 to 5000 ppm 0440 0070 Option CO sensor, 0 to 10000 ppm, H2-compensated, up to 10,000 ppm, H2-comp. 0440 0065 Option CO sensor, 0 to 40000 ppm 0440 0067 Option measurement range extension (dilution) over all sensors 0440 0059 Option flue gas moisture measurement to determine water level, + 2 to + 31 % 0440 0063 Manual flow measurement (differential pressure measurement) for using Pitot tubes 0440 0016 Option automatic velocity measurement, 5 to 40 m/s 0440 0088 Option automatic calibation gas supply for one calibration gas bottle to flue gas analyzer , (Connection for 1 calibration 0440 0061 gas bottle, max. pressure 30 hPa) Quick-action coupling for calibration gas connection 0699 2832/3 Software Part no. Automatic software for programming and for long-term measurements with testo 360, for programming and long-term 0554 0378 measurement Analysis software for professional presentation of measurement results of testo 360, for professional presentation of 0554 0380 measurement results Basic software to operate testo 360 0554 0364 Information about instrument upgrades and prices available on request.
  7. 7. testo 360 We measure it.Industry gas probes Probe type Illustration Technical data Part no. Industry gas probes – modular system Heated handle, power supply 115 Power consumption: 200 watts; Temp. gas path: > 180 °C; 0600 7920 Ready to operate: after approx. 20 min; Length of mains to 230 V, 50/60 Hz cable: 3 m; Protection class: IP54; Ambient temp.: -20 to +50 °C; gas inlet: G1/4“; gas outlet: M 10x1 outer thread; weight: 1.7 kg Adapter, non-heated, IP54, gas Ambient temp.: -20 to +50 °C; Protection class: IP54; Gas 0600 7911 inlet: G1/4“; Gas outlet: M 10x1 outer thread; Weight: 0.4 kg inlet G1/4, gas outlet M10x1 outer thread, weight 0.4 kg, ambient temperature -20 to +50 °C Non-heated sampling pipe to +600 Connection: G1/4“ 0600 7801 1000 mm Weight 0.4 kg °C, stainless steel 1.4571 Non-heated sampling pipe to Ø 20 mm Ø 12 mm 0600 7803 +1200 °C, Inconel 625 Non-heated sampling pipe to Connection: G1/4“ 0600 7805 1000 mm Weight 0.4 kg +1800 °C, Al-Oxide Ø 20 mm Ø 12 mm Heated sampling pipe, power 1000 mm Heating: > +180 °C; power consumption: 650 watts; 0600 7820 Connection: electr. connection to heated handle, connection supply 230 V / 50 Hz, stainless Ø 25 mm adapter with thread connection/screw socket G1/4“; Max. flue steel 1.4571 gas temp.: +600 °C Extension pipe to +600 °C, Connection: Thread screw/screw socket G1/4“; 0600 7802 1000 mm Weight: 0.45 kg stainless steel 1.4571 Extension pipe to +1200 °C, Ø 12 mm 0600 7804 Inconel 625 Ø 20 mm Preliminary filter for dusty flue 50 mm Dust load: max. 20 g / m3; filter fineness: 20 0554 0710 gases, ceramic µm; Temperature: max. 1000 °C; Material: ceramic; Connection: G1/4“ thread nipple; Preliminary filter can only be Ø 23 mm Weight: 0.2 kg mounted on extension pipe 0600 7802 or 0600 7804. Thermocouple, NiCr-Ni, -200 to Connection: to analyzer via 4 m connection cable with 8-pin 0430 0361 plug; weight: 0.15 kg. The length depends on the number of +1200 °C, Inconel 625, length 1.2 m sampling/extension pipes used. Ø 4 mm Thermocouple, NiCr-Ni, -200 to 0430 0363 +1000 °C, Inconel 625, length 3.2 m Mounting flange, stainless steel 0554 0760 1.4571, adjustable quick-action fitting suitable for all Ø 160 mm sampling/extension pipes 130 mm Transport case for industry probes Part no. Transport case for industrial probes, aluminium, space for: handle, probes, flange and accessories 0516 7900 Heated hose for accurate NOX and SO2 measurements – avoids absorption Part no. Hose heated, length 4 m, (also for multi-function probe) 0401 0399 Hose heated, length 8.0 m, however only for 230V/50Hz (not for multi-function probe) 0401 0394 Voltage supply: 115/230 V; 50 to 60 Hz (4 m), 230 Ambient temperature: -25 to +0 °C V/50 Hz (8 m) Inner filter part no.: 0554 0393 (5 in pack) Inner temperature: approx. 180 °C Material: PTFE Material inner hose: PTFE Filter fineness: 5 µm Material outer hose: PTE (max. 150 °C) Dimensions: Ø 12 mm, 55 mm length Max. bend radius: 0.2 m Diameter: 28 mm
  8. 8. testo 360 We measure it.Accessories 1 Couplings/adapters Part no. Hose adapter for connecting test gas to thermocouple input, Material Hose PTFE 0699 2757-4 Plug/screw connection, Length 0.3 m, Weight 0.3 kg Quick-action coupling for dP inputs and test gas at the test gas input, Material stainless steel, Hose 0699 2832/3 connection Ø 4 mm Screw adapter for connecting non-Testo probes to the heated hose, Material stainless steel, Thread 0699 3412 Swagelock Connection plug for the alarm output, Conn. 4-pin 0699 2816 Transport and Protection Part no. 2 Transport trolley, dismantlable 0554 3600 For analyzer box testo 360 and accessories, Dimensions 610 x 430 x 1060 mm (W x D x H), Weight 14 kg, Material Aluminium 3 Transport case 0516 0360 For testo 360 incl. accessories, Outer dim. 770 x 440 x 480 mm (W x D x H), Empty weight 11.4 kg, 2 transport rollers, 2 carrying handles, 3 lid locks Voltage cable 0699 2757/1 1 2 3
  9. 9. testo 360 We measure it.Temperature probes Probe type Dimensions Measuring Accuracy t99 Part no. Probe shaft/probe shaft tip range Temperature probes Combustion air temperature probe, 0 to +100 °C 30 s 0600 9791 300 mm immersion depth 300 mm Ø 5 mm Combustion air temperature probe, 0 to +100 °C 0600 9787 190 mm immersion depth 190 mm Ø 4 mm Combustion air temperature probe, 0 to +100 °C 30 s 0600 9797 60 mm immersion depth 60 mm Ø 4 mm Mini ambient air probe 0 to +80 °C 0600 3692 Spare meas. head for pipe wrap -60 to +130 °C Class 2 5s 0602 0092 35 mm probe, TC Type K 15 mm Quick-action surface probe with -200 to +300 °C Class 2 3s 0604 0194 150 mm sprung thermocouple strip; measuring range shot-term to +500 °C, Conn.: Plug-in head. Ø 10 mm connection cable 0430 0143 or 0430 0145 required Connection cable for temperature probes 0604 0194 Part no. Cable, 1.5 m long, connects probe with plug-in head to meas. instrument, PUR coating material 0430 0143 Cable, 5 m long, connects probe with plug-in head to measuring instrument, PUR coating material 0430 0145
  10. 10. testo 360 We measure it.Pitot tubes Probe type Dimensions Measuring Part no. Probe shaft/probe shaft tip range Pitot tubes and accessories Pitot tube, stainless steel, 350 mm long, measures flow Oper. temp. 0635 2145 0 to +600 °C velocity combined with pressure probes 0638 1347/..1447 ..1547 350 mm Ø 7 mm Pitot tube, stainless steel, 1000 mm long, measures flow Oper. temp. 0635 2345 0 to +600 °C velocity combined with pressure probes 0638 1347/..1447 ..1547 1000 mm Ø 7 mm Pitot tube, stainless steel, 500 mm long, measures flow -40 to +600 °C 0635 2140 velocity with temperature, for pressure probes 0638 500 mm 1347/..1447 Ø 8 mm Pitot tube, stainless steel, 750 mm long, measures flow -40 to +1000 °C 0635 2042 velocity with temperature, 3x hoses (5 m long) and heat 750 mm protection plate Ø 8 mm Pitot tube, stainless steel, 1000 mm, measures flow -40 to +600 °C 0635 2240 velocity with temperature, for pressure probes 0638 1000 mm 1347/..1447 Ø 8 mm Connection cable for Pitot tubes Part no. Connection hose; silicone; 5 m long; max. load 700hPa (mbar) 0554 0440
  11. 11. testo 360 We measure it.Recommended Set: testo 360: Typical Set for Official testo 360: Typisches Set für die Measurements* Thermoprozess-Messung* Part no. Part no. testo 360 flue gas analyzer, approved, without notebook, fitted with O2 testo 360 flue gas analyzer, approved, without notebook, fitted with O2 gas sensor, gas preparation, housing heating 0563 3600 gas sensor, gas preparation, housing heating 0563 3600 Option CO2 IR-sensor, incl.absolute pressure measurement 0 to 5 Option CO2 IR-sensor, incl.absolute pressure measurement 0 to 5 Vol.% 0440 0084 Vol.% 0440 0084 Option SO2-sensor, 0 to 5000 ppm 0440 0070 Option measurement range extension (dilution) over all sensors0440 Manual flow velocity measurement (deltaP measurement) with Pitot 0059 tube 0440 0016 Option flue gas moisture measurement to determine water level, + 2 to Basic software to operate testo 360 0554 0364 + 31 % 0440 0063 Hose heated, length 4 m 0401 0399 Basic software to operate testo 360 0554 0364 Transport trolley 0554 3600 Automatic software for programming and for long-term measurements Transport case 0516 0360 with testo 360 0554 0378 Heated handle 0600 7920 Analysis software for professional presentation of measurement results of testo 360 0554 0380 Heated sampling pipe 0600 7820 Hose heated, length 4 m 0401 0399 Extension pipe to +600 °C, stainless steel 1.4571 0600 7802 Transport trolley 0554 3600 Preliminary filter for dusty flue gases, ceramic 0554 0710 Adapter, non-heated, IP54, gas inlet G1/4, gas outlet M10x1 outer Mounting flange, stainless steel 1.4571 0554 0760 thread, weight 0.4 kg, ambient temperature -20 to +50 °C 0600 7911 Transport case for industrial probes, aluminium 0516 7900 Non-heated sampling pipe to +1800 °C, Al-Oxide 0600 7805 testo 360: Typical Set for Service and testo 360: Typical Set for Research and Adjustment* Development* Part no. Part no. testo 360 flue gas analyzer, approved, without notebook, fitted with O2 testo 360 flue gas analyzer, approved, without notebook, fitted with gas sensor, gas preparation, housing heating 0563 3600 O2 gas sensor, gas preparation, housing heating 0563 3600 Option NO-sensor, 0 to 3000 ppm, resolution 1 ppm 0440 0068 Option NO-sensor, 0 to 3000 ppm, resolution 1 ppm 0440 0068 Option NO2-sensor, 0 to 500 ppm 0440 0069 Option NO2-sensor, 0 to 500 ppm 0440 0069 Option CO sensor, 0 to 10000 ppm, H2-compensated 0440 0065 Option CO sensor, 0 to 10000 ppm, H2-compensated 0440 0065 Option CO2 IR-sensor, incl.absolute pressure measurement 0 to 5 Option CO2 IR-sensor, incl.absolute pressure measurement 0 to 5 Vol.% 0440 0084 Vol.% 0440 0084 Basic software to operate testo 360 0554 0364 Option SO2-sensor, 0 to 5000 ppm 0440 0070 Automatic software for programming and for long-term measurements Option CxHy sensor, methane 80 to 3000 ppm, propane 80...3000 with testo 360 0554 0378 ppm, butane 80 to 3000 ppm; resolution 10 ppm; Pellistor is adjusted Analysis software for professional presentation of measurement results to methane in the factory. 0440 0099 of testo 360 0554 0380 Option measurement range extension (dilution) over all sensors0440 Hose heated, length 4 m 0401 0399 0059 Transport trolley 0554 3600 Option flue gas moisture measurement to determine water level, + 2 Transport case 0516 0360 to + 31 % 0440 0063 Heated handle 0600 7920 Manual flow velocity measurement (deltaP measurement) with Pitot tube 0440 0016 Heated sampling pipe 0600 7820 Basic software to operate testo 360 0554 0364 Extension pipe to +600 °C, stainless steel 1.4571 0600 7802 Hose heated, length 4 m 0401 0399 Preliminary filter for dusty flue gases, ceramic 0554 0710 Transport trolley 0554 3600 Mounting flange, stainless steel 1.4571 0554 0760 Transport case 0516 0360 Transport case for industrial probes, aluminium 0516 7900 Heated handle 0600 7920 Heated sampling pipe 0600 7820 Extension pipe to +600 °C, stainless steel 1.4571 0600 7802 Preliminary filter for dusty flue gases, ceramic 0554 0710 Mounting flange, stainless steel 1.4571 0554 0760 Transport case for industrial probes, aluminium 0516 7900*A notebook is required for the operation of the testo 360!
  12. 12. testo 360 We measure it.Reference flue gas analyzer Subject to change without notice. 0981 2734/dk/A/01.2012www.testo.co.uk

×