Committing to the future                                                   2011Measuring Instruments for Flue Gas and Emis...
Information                                                                 Flue gas analysis    Ideal operating range of ...
ContentsFlue gas analysers for contractors                                                                                ...
testo 308                                                    The electronic smoke tester – "the real measurement"     test...
testo 327-1                              The starter instrument for flue gas analysistesto 327-1 is your introductory     ...
testo 327-2                                                 The service instrument for flue gas analysis     The testo 327...
testo 327                                                  Accessories Instrument/Options                                 ...
testo 330-1 LL                         testo 330-LL – visualizes measurement data graphically    Understand flue gas      ...
testo 330-2 LL                                    testo 330-LL – visualizes measurement data graphically Understand flue g...
testo 330-LL                                       Technical data     testo 330-LL     Temperature                Meas. ra...
testo 330-LL                                         Suitable probes at a glance Modular flue gas probes                  ...
testo 330-LL                                             Suitable probes at a glance / Accessories      Ambient air temper...
testo 340        330-LL                               Understand flue                                             Technica...
Testo - Flue Gas Emissions
Testo - Flue Gas Emissions
Testo - Flue Gas Emissions
Testo - Flue Gas Emissions
Testo - Flue Gas Emissions
Testo - Flue Gas Emissions
Testo - Flue Gas Emissions
Testo - Flue Gas Emissions
Testo - Flue Gas Emissions
Testo - Flue Gas Emissions
Testo - Flue Gas Emissions
Testo - Flue Gas Emissions
Testo - Flue Gas Emissions
Testo - Flue Gas Emissions
Testo - Flue Gas Emissions
Testo - Flue Gas Emissions
Testo - Flue Gas Emissions
Testo - Flue Gas Emissions
Testo - Flue Gas Emissions
Testo - Flue Gas Emissions
Testo - Flue Gas Emissions
Testo - Flue Gas Emissions
Testo - Flue Gas Emissions
Testo - Flue Gas Emissions
Testo - Flue Gas Emissions
Testo - Flue Gas Emissions
Testo - Flue Gas Emissions
Testo - Flue Gas Emissions
Testo - Flue Gas Emissions
Testo - Flue Gas Emissions
Testo - Flue Gas Emissions
Upcoming SlideShare
Loading in …5
×

Testo - Flue Gas Emissions

1,263 views

Published on

The market for the supply of heat to buildings is changing constantly. Solar systems, heat systems and other technologies, integrated concepts for energy supply and electronic control systems have established themselves in this market. The objectives remain the same – demand controlled heat supply, low energy consumption and low emissions.

Testo supply superior measurement tools for all you engineering and servicing needs. It is impossible to find another product line with so many well-engineered mobile gas analysers as Testo have. Which ever flue gas analyser you decide, you can be assured that the gas paths are optimised i.e. are kept as short as possible. Using the instruments has never been so easy; this gives the user confidence to work efficiently, fast and professionally.

Published in: Business, Technology
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
1,263
On SlideShare
0
From Embeds
0
Number of Embeds
2
Actions
Shares
0
Downloads
37
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Testo - Flue Gas Emissions

  1. 1. Committing to the future 2011Measuring Instruments for Flue Gas and Emissions CO CO2 NO SO2 Vol. % O2 °C hPa rpm V mA HC
  2. 2. Information Flue gas analysis Ideal operating range of burners Flue gas loss (qA) The purpose of flue gas Insufficient air Excess air s Flue gas loss is also a calculated los Table of fuel-specific factors analysis is to ensure eg as variable for which there are two different Flue gas components Flu environmentally friendly formulae available, depending on fuel. Ideal operating range of a burner Fuel A2 B f CO2max and economic operation The difference between flue gas Fuel oil 0,68 0,007 - 15,5 of burners. These Carbon temperature (FT) and ambient Natural gas 0,65 0,009 - 11,9 dioxide formulae and tables can Fuel/air mixture (CO2) temperature (AT) play a decisive role in Liquefied gas 0,63 0,008 - 13,9 be used to understand both calculations. The flue gas Coke, wood 0 0 0,74 20,0 flue gas analysis. They temperature is measured in the hot spot Briquette 0 0 0,75 19,3 are all stored in Testos Ca rbo of the flue gas where the temperature is Brown coal 0 0 0,90 19,2 2) flue gas analysers. All of nm en (O highest. The ambient temperature is on Oxyg Anthracite 0 0 0,60 18,5 oxi the calculations are de (CO measured at the intake opening of the Coke oven gas 0,6 0,011 - - ) carried out automatically. burner or in the supply pipe of systems Town gas 0,63 0,011 - 11,6 independent of ambient air. Cal gas 0 0 - 13,0 λ =1 Excess air Efficiency (η) Calculating flue gas loss [ ] Calculating flue gas loss for solid fuels A2 Combustion efficiency is calculated by Efficiency describes how well a burner qA = (AT - VT) x ____________________ +B Used if the fuel-specific factors A2 and (21 - O2) subtracting the flue gas losses from combusts a specific fuel. B are zero. 100% or maximum efficiency. AT: Flue gas temperature (FT) AT - VT qA = f x __________________________ VT: Ambient temperature (AT) CO2 A2/B: Fuel-specific factors (see Table) Oil burners 21: Oxygen level in air CO2 level as high as possible, smoke Calculating CO2 O2: O2 value measured in flue gas number between 0 and 1 Gas burners CO2max x (21 - O2) CO2: Carbon dioxide, calculated CO2 = __________________________ __________________________ using CO2max value and O2 CO2 level as high as possible, CO level 21 500 ppm in undiluted flue gas Excess air λ NOx measurement Efficiency of a small burner η = 100 % - qA In order to achieve full combustion, it is NOX is the name given to the qA = Flue gas loss (%) necessary to supply the burner with more combination of NO and NO2 gases. The air than is theoretically necessary. The percentage of NO2 gases in NOX varies ratio of this air to the theoretical air greatly by source type. For instance, requirement is known as excess air. NO2 levels in many burner systems is 3- 5% but in engines can be 40% and above. Measuring industrial flue gases The following goals apply when products, reduction of costs by saving CO2 infrared sensor measuring industrial flue gases: energy and minimising down periods. Gas Important parameters: O2, CO, CO2, Gas Emissions monitoring SO2. – Adherence to legally specified limits CO2 (e. g. TA Luft) Measurement principles – Meeting ISO 14000 requirements Testo uses electrochemical gas sensors – Important parameters: NOX (NO + for the O2, CO, NO, NO2, H2S and SO2 CO2 NO2), SO2, CO, H2S, O2 and in some parameters. cases CO2 Infrared Interference filter I = 4.27 µm These sensors have major advantages projector Absorption CO2 Infrared detector Adjustment and optimisation of systems for portable applications: Electrochemical gas sensor e.g. for This refers to adherence to emission toxic gases O2 sensor limits. Otherwise the aim is to reduce – Not affected by vibrations or Flue gas operation costs by saving energy. changes in temperature (e.g. CO) Gas permeable membrane Gas permeable membrane Important parameters: O2, CO, CO2, – Small dimensions and low weight Cathode excess air and efficiency. – Easy to change without cal gas – Wide measuring ranges and low Operational electrode OH- OH- OH- Anode Process monitoring in the zero point drift for low concentrations OH- Reference electrode OH- manufacturing industries – Extreme linearity over the whole H+ Backplate electrode OH- Temperature sensor Monitoring combustion processes for measuring range. Aqueous electrolyte OH- quality assurance purposes, ISO 9000 An NDIR sensor is used for CO2. Gas permeable Aqueous electrolyte requirements, reduction of non-spec membrane Outer electric circuit Fresh air2
  3. 3. ContentsFlue gas analysers for contractors Pagetesto 308 The electronic smoke tester – "the real measurement" 4testo 327-1 The starter instrument for flue gas analysis 5testo 327-2 The service instrument for flue gas analysis 6testo 330-1 LL Visualizes measurement data graphically 8testo 330-2 LL Visualizes measurement data graphically 9Flue gas analysers for industry Pagetesto 325-I Industrial flue gas – Affordable analysis and documentation 14testo 325-I COhigh Your introduction to portable flue gas analysis 15testo 340 The portable measuring instrument for industrial flue gas analysis 16testo 350 Versatile exhaust gas system 22testo 350 MARITIME The portable exhaust gas analyzer for marine diesel engines 36testo 360 Portable multi-function analyser for industrial flue gases 38 3
  4. 4. testo 308 The electronic smoke tester – "the real measurement" testo 308 is the instrument for • Easy, self-explanatory menu easy electronic soot count • Clear segment display measurement. It records the soot • LED display illumination count digitally to one decimal • Easy IR printout space with constant sampling. The powerful LED backlighting • Integrated condensate trap (evacuable) guarantees good legibility even under poor light conditions. The • Integrated dirt filter (exchangeable) instrument excels through its easy • TÜV tested menu structure and ergonomic • Additional soot count determination pistol grip. on filter paper testo 308 achieves high accuracy • Li-ion battery, (2600 mA, 45 individual measurements), chargeable inside or thanks to the heating of the outside the instrument measurement spot, thus avoiding measurement errors due to • Operation with mains unit possible condensation. • Battery and charger from testo 327 and testo 330 can be used The infrared interface allows • BLUETOOTH interface (optional)* wireless communication with an • Easy exchange of soot filter roll IrDa printer, a flue gas analyzer and a Pocket PC. • Spare battery chargeable separately or in instrument • Protection class IP40 testo 308 testo 308 smoke tester incl. rechargeable battery and calibration protocol for measuring soot count Part no. 0632 0308 testo 308 / BLUETOOTH® Set testo 308 Set testo 308 / BLUETOOTH® testo 308 smoke tester with Set testo 308 smoke tester incl. Set testo 308 smoke tester with BLUETOOTH® interface incl. mains unit and bag BLUETOOTH® interface incl. mains rechargeable battery and calibration unit and bag* protocol for measuring soot count, for the measurement of soot count* Part no. Part no. Part no. 0632 0309 0563 3080 0563 3090 Technical data Accessories Zubehör Part no. Sensor Photodiode Display Segment display with Instrument bag for smoke tester testo 308 0516 0002 Meas. range 0 to 6 RZ background illumination 0.1 RZ 1. BlmSchV, METAS, EU- 100-240 V AC / 6.3 V DC international mains unit for mains operation or 0554 1096 Resolution Norms and tests battery charging in instrument guideline 2004/108/EG Accuracy ±0.2 RZ Oper. temp. 0 to +40 °C Probe holder for smoke tester testo 308 and flue gas probes 0554 0616 Pump capacity 1,63 ± 0,1 l Storage temp. -20 to +50 °C Reference filter at 990 mbar and +20 °C Protection class IP40 Spare battery 2600 mA 0515 0107 ambient temperature Interfaces IR/IRDA interface, Weight 600 g incl. battery BLUETOOTH®* Charger for spare battery 0554 1103 Dimensions 270 x 63 x 120 mm Gas sampling Stainless steel pipe ca. Rech. battery Lithium ion battery, 2600 220 mm, rubber hose Spare soot filter paper (8 paper rolls) 0554 0146 mA 100 mm Battery life 45 individual measurements Warranty 2 years Spare dirt filters (10 off) 0554 1101 Battery charge in the instrument via mains unit or externally Cone with fixing screw 0554 9010 by charger Testo fast printer with wireless infrared interface, 1 roll thermal paper and 4 0554 0549 AA batteries Basic system case for analyzer, probes and accessories 0516 3330 *Country permits: The BLUETOOTH® wireless module used by Testo has permits for the following listed countries, and can only be used in those countries, i. e. BLUETOOTH® wireless transfer may not be used in any other country! Europe including all EU member states: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Shaft length 330 mm, suitable for smoke tester testo 308 0440 1115 Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden and Turkey; European countries (EFTA): Iceland, Liechtenstein, Norway and Switzerland; Non-European countries: Ukraine, Colombia and El Salvador.4 Additional information at www.testo.com
  5. 5. testo 327-1 The starter instrument for flue gas analysistesto 327-1 is your introductory • Easy menu navigationinstrument to flue gas analysis. It • 4 line segment displaymeasures combustion efficiency, • LED display light°C, O2, CO2, CO and flue • Easy IR printoutdraught. The strong LEDbackground light in the 4 line • Built-in condensate trapdisplay guarantees an easy-to- • TÜV By RgG 253 acc. toread display even if lighting 1. BImSchVconditions are unfavourable. The • EN 50379 Part 2 for O2, °C, hPaanalyser stands out on account of • EN 50379 Part 3 for COits easy menu navigation and • Small Li-ion rechargeable batteryergonomic housing as well as its (1200 mA, lifetime of 5 h) can bedurability. recharged inside or outside instrument • Fast probe connection using singleThe single-sensor versions testo probe plug327-1 O2 or testo 327-1 CO are • Ambient CO measurement using flueideal for very simple applications. gas probeThe testo 327-1 O2 offers the • O2 dual wall measurement (can bestandard flue gas analysis stored)functions for the basic • Separate AT temperatureadjustments of oil and gas measurementcombustion. It measures the O2 • Undiluted CO measurement (can becontent of the exhaust gas, the stored)exhaust gas temperature and the • Draught measurementflue draught. The exhaust gas • 6-8 fuels (country-specific (e.g.loss and the degree of efficiency UK=6))are calculated. • IP 40The testo 327-1 CO offers thestandard functions for CO safetymeasurements. It measures theCO content in the exhaust gas,the exhaust gas temperature andthe flue draught. testo 327-1 testo 327-1 flue gas analyser, rechargeable battery and calibration protocol included, measures O2, CO, hPa and °C Part no. 0632 3201 testo 327-1 CO testo 327-1 O2 testo 327-1 CO flue gas analyser, testo 327-1 O2 flue gas analyser, rechargeable battery and calibration rechargeable battery and calibration protocol included, measures CO, protocol included, measures O2, hPa and °C hPa and °C Part no. Part no. 0632 3204 0632 3203Technical data testo 327-1 Basic Set for heating and installation techniciansTemperature measurement -40 to +600 °C Weight Approx. 500 g · testo 327-1 flue gas analyser incl. rech. batteries and calibrationDraught measurement ±40 hPa Dimensions 216 x 68 x 47 mm protocol Part no. 0 to 120% Storage temp. -20 to +50 °C · Mains unit 100-240 V for mains operation or battery charging in 0563 3203 70Efficiencymeasurement (Eta) instrument Oper. temp. -5 to +45 °C · Compact flue gas probe, 180 mm long, Ø 6 mmFlue gas loss (qA) 0 to 99.9% Power supply via Li-Ion rechargeable battery · Combustion air temperature probe, immersion depth 190 mmO2 measurement 0 to 21 Vol. % Battery life >5h · Fast printer with wireless infrared interfaceCO2 measurement 0 to CO2 max Warranty 2 years on instrument, probes and gas sensors · Instrument cleaner 100 mlCO measurement 0 to 4000 ppm 1 year on thermocouple · Basic system case for instrument, probes and accessories and rechargeable battery (wearing parts excluded) Additional information at www.testo.com 5
  6. 6. testo 327-2 The service instrument for flue gas analysis The testo 327-2 service analyzer measures combustion efficiency, New Now with Wireless transfer °C, O2, CO2, CO and flue draught. The bright LED backlight • Life expectancy of gas sensors up to in the 4-line display guarantees an 3 years easy-to-read display even if lighting conditions are • Assurance thanks to instrument and sensor diagnosis unfavourable. The analyzer stands out on account of its easy menu • IR and IRDA interface for easy reading navigation and ergonomic out of data to printer or Pocket PC housing as well as its durability. • BLUETOOTH® wireless transfer (optional) testo 327-2 enthuses the user • Delta T measurement with additional useful features such as the data store (20 • Delta P measurement: 2 measurement ranges measurements), differential temperature measurement to • Store (20 readings) determine flow and return • Li-ion rechargeable battery (2,400 temperatures or differential mA), 10 hr lifetime pressure measurement to adjust • TÜV By RgG 254 acc. to pressure ratios in gas systems. 1. BImSchV • CO option with H2 compensation Official measurements on gas burners in accordance with EN • Official test in accordance with EN 50379 Part 2 are also possible standard 50379-2 for °C; O2, hPa, Part 3 for CO thanks to the option of a H2 compensated CO sensor. • Optional Part 2 for CO with H2 compensation The IrDa interface opens Technical data communication options with a Temperature measurement -40 to +600 °C Weight Approx. 500 g Pocket PC. Draught measurement ±40 hPa Dimensions 216 x 68 x 47 mm Efficiency 0 to 120% Storage temp. -20 to +50 °C testo 327-2 measurement (Eta) Oper. temp. -5 to +45 °C testo 327-2 flue gas analyzer, Pressure measurement ±200 hPa Power supply via Li-ion rechargeable battery rechargeable battery and calibration Flue gas loss (qA) 0 to 99.9% Battery life > 10 h protocol included, measures O2, O2 measurement 0 to 21 Vol. % Warranty 2 years on instrument, CO, hPa and °C CO2 measurement 0 to CO2 max probes and gas sensors CO measurement 0 to 4000 ppm 1 year on thermocouple and rechargeable battery Part no. Option CO measurement 0 to 8000 ppm (wearing parts excluded) 0632 3202 (H2-compensated) testo 327-2 Set for heating fitters testo 327-2, Complete set for heating installers · testo 327-2 flue gas analyzer incl. rech. battery and calibration protocol · testo 327-2 exhaust gas analyzer, rechargeable battery and calibration · Including option: CO-H2 measurement Part no. protocol included Part no. 0563 3202 70 Option: CO-H2 measurement 0563 3202 77 · Mains unit 100-240 V for mains operation or battery charging in instrument · testo 308 smoke tester, rechargeable and calibration protocol included · Modular flue gas probe, 300 mm long, Ø 8 mm, TÜV approval · Mains unit 100-240 V for mains operation or charging rechargeable · Combustion air temperature probe, immersion depth 190 mm battery in instrument · Hose connection set for separate gas pressure measurement · Modular flue gas probe, 300 mm long, Ø 8 mm, TÜV approved · Fast printer with wireless infrared interface · Combustion air temperature probe, 190 mm immersion depth · Flexible probe shaft, 330 mm long, Ø 10 mm, Tmax. 180°C · Hose connection set for separate gas pressure measurement · Instrument cleaner, 100 ml · Fast printer with wireless infrared interface · Basic system case for instrument, probes and accessories · Flexible probe shaft, 330 mm long, Ø 10 mm, Tmax. 180°C · Instrument cleaning agent, 100 ml · Basic system case for instrument, probes and accessories testo 327-2, Complete set for heating inspectors · testo 327-2 exhaust gas analyzer, rechargeable battery and calibration protocol included Part no. Option: CO-H2 measurement 0563 3202 78 · testo 308 smoke tester, rechargeable battery and calibration protocol included · Mains unit 100-240 V for mains operation or charging rechargeable battery in instrument · Modular flue gas probe, 300 mm long, Ø 8 mm, TÜV approved · Combustion air temperature probe, 190 mm immersion depth · Dual wall probe for O2 supply air measurement · CO multiple hole probe shaft, 300 mm long, Ø 8 mm *Country permits: The BLUETOOTH® wireless module used by Testo has permits for the following listed countries, and · Flexible probe shaft, 330 mm long, Ø 10 mm, Tmax. 180°C can only be used in those countries, i. e. BLUETOOTH® wireless transfer may not be used in any other country! Europe including all EU member states: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, · Instrument cleaning agent, 100 ml Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, · Basic system case for instrument, probes and accessories Portugal, Romania, Slovakia, Slovenia, Spain, Sweden and Turkey; European countries (EFTA): Iceland, Liechtenstein, Norway and Switzerland; Non-European countries: Ukraine, Colombia and El Salvador.6 Additional information at www.testo.com
  7. 7. testo 327 Accessories Instrument/Options Part no. Accessories Part no.testo 327-1 flue gas analyser, rechargeable battery and calibration protocol 0632 3201 100-240 V AC / 6.3 V DC international mains unitfor mains operation or 0554 1096included, measures O2, CO, hPa and °C battery charging in instrumenttesto 327-1 O2 flue gas analyser, rechargeable battery and calibration 0632 3203 Spare rech. batt. w/ charging station 0554 1087protocol included, measures O2, hPa and °C Testo fast printer with wireless infrared interface, 1 roll thermal paper and 4 0554 0549testo 327-1 CO flue gas analyser, rechargeable battery and calibration 0632 3204 AA batteriesprotocol included, measures CO, hPa and °C Spare thermal paper for printer (6 rolls), permanent ink 0554 0568testo 327-2 flue gas analyzer, rechargeable battery and calibration protocol 0632 3202 Instrument cleaner (100 ml) 0554 1207included, measures O2, CO, hPa and °C Smoke tester with oil, soot sheet, for measuring soot in flue gas 0554 0307 Upgrade/Options Part no.Option: CO-H2-measurement for testo 327 0440 3273 Hose connection set for separate gas pressure measurement 0554 1203Option: fine draught measurement, resolution 0.1 Pa, measurement range up to100 Pa 0440 3271 Full version easyheat and easyheat.mobile. Software package for PC and 0554 1210(instead of standard draught measurement) - for testo 327-1, 327-1 O2/CO and testo 327-2 Pocket PC. (for testo 327-2 only)Option: fine differential pressure measurement, resolution 1 Pa; for testo 327-2 only 0440 3272 ISO calibration certificate/flue gas 0520 0003 0344 0011 Differential temperature set consisting of 2 Velcro probes and temperature 0554 1208BLUETOOTH® module* adapter Retrofits Part no. Spare particle filter (10 off) for probe handle 0554 3385Retrofit: O2 measurement for testo 327-1 CO Spare soot filter paper (8 paper rolls) 0554 0146Retrofit: CO measurement for testo 327-1 O2 Spare sensors Part no. Cases Part no.Spare O2 sensosr for testo 327-1, 327-1 O2 0390 0047 Basic system case for instrument , probes and accessories 0516 3334Spare CO sensor for testo 327-1, 327-1 CO 0390 0046Spare O2 sensor, Testo-specific 0390 0092Spare CO sensor (without H2 compensation) (testo 330-1) 0390 0095Spare CO sensor (H2 compensated) (testo 330-2/-3) 0390 0109 Probes Part no. Compact basic flue gas probes available in two lengths, probe stop, NiCr-Ni thermocouple, 1.5 m hose and particle filter includedCompact flue gas probe, 180 mm long, Ø 6 mm, Tmax. 500°C 0600 9740Compact flue gas probe, 300 mm long, Ø 6 mm, Tmax. 500°C 0600 9741Flexible flue gas probe, 330 mm long, Ø 10.5 mm, connection head 6 mm, Tmax. 180°C, short-term up to 200°C 0600 9742 Modular flue gas probe from the testo 330 product line, available in 2 lengths, probe stop, NiCr-Ni thermocouple, 2.2 m hose and particle filter included Part no.Flue gas probe, 180 mm long, Ø 8 mm, Tmax 500 °C, TÜV approval 0600 9760Flue gas probe, 300 mm long, Ø 8 mm, Tmax 500 °C, TÜV approval 0600 9761Flue gas probe, 180 mm long, Ø 6 mm, Tmax 500 °C 0600 9762Flue gas probe, 300 mm long, Ø 6 mm, Tmax 500 °C 0600 9763Flexible flue gas probe, 330 mm long, Tmax. 180 °C, short-term 200 °C, bending radius max. 90° for measuring at inaccessible points 0600 9764 Probe accessories Probe accessories Part no.Probe shaft, 180 mm long, Ø 8 mm, Tmax 500 °C 0554 9760 Multi-hole probe shaft, 180 mm long, Ø 8 mm, for mean CO calculation 0554 5763Probe shaft, 180 mm long, Ø 6 mm, Tmax 500 °C 0554 9762 Hose extension, 2.8 m, extension cable for probe and analyser 0554 1202Probe shaft, 300 mm long, Ø 8 mm, Tmax 500 °C 0554 9761 6 mm probe stop, PTFE, with spring clamp and handle, Tmax 200 °C 0554 3327Probe shaft, 335 mm long, with probe stop, Ø 8 mm, Tmax 1000 °C 0554 8764 8 mm probe stop, PTFE, with spring clamp and handle, Tmax 200 °C 0554 3328Flexible probe shaft, 330 mm long, Ø 10 mm, Tmax 180 °C 0554 9764 8 mm probe stop, steel, with spring clamp and handle, Tmax 500 °C 0554 3330Multi-hole probe shaft, 300 mm long, Ø 8 mm, for mean CO calculation 0554 5762 6 mm, probe stop, steel, with spring clamp and handle, Tmax 500 °C 0554 3329 Modular flue gas probe handle 0440 3334 Additional probes Illustration Part no.Dual wall clearance probe for O2 supply air measurement 0632 1260 Combustion air temperature probes Illustration Part no.Combustion air temperature probe, immersion depth 300 mm 0600 9791Combustion air temperature probe, immersion depth 190 mm 0600 9787Combustion air temperature probe, immersion depth 60 mm 0600 9797Quick-action surface probe with sprung thermocouple strip, measuring range short-term to +500 °C 0604 0194 Additional information at www.testo.com 7
  8. 8. testo 330-1 LL testo 330-LL – visualizes measurement data graphically Understand flue gas New features of the testo 330 LL: A measuring instrument withgreat analysis at a glance • Colour graphic display with 240 x ease of communication: The new colour graphic display of 320 Pixel • Powerful memory management: the flue gas analyzer testo 330 LL • Graphic processing of measurement 500,000 readings visualizes the measurement data data • IrDa/ Bluetooth interface for data graphically: Self-explanatory • New instrument design transfer to Pocket-PC / laptop / graphic curves as well as easy printer • Instrument diagnosis function uses symbols and clear colour design easy "traffic light presentation to • USB interface for data readout to a ease the analysis of the enable comprehensive error PC software measurement data considerably. diagnosis, diagnosis of sensors and • ZIV (Central Guild Association) driver The central element of the new the call-up of instrument information for all standard industry software graphic processing of the such as the filling level of the packages condensate trap and the battery measurement data is the flue gas status matrix. • Logger function for long-term In the course of the flue gas measurements measurement, this shows • New measurement menus, e. g. Gas whether the CO and O2 values, pipe test as well as other measurement • Pressure measurement up to 300 parameters, are in the green, mbar permitted range, and the heating • User-defined fuels system is thus optimally adjusted. Thumb symbols instantly show Other features: WARR AN the status of the system. If the CO • Reduced follow-on costs thanks to 4 YEAR TY: S* and O2 concentrations measured LL sensors with 4 years’ guarantee are in the green range, the • Life expectancy up to 6 years (O2 / thumbs point up. If the recorded CO) measurement values are not • At least 1 sensor replacement is EN 50379-2 and within the optimum range, the saved in the course of a normal 1. BImSchV symbols of the flue gas matrix working life provide important information for • Powerful Li-ion rechargeable battery the required adjustment of the - life: >6 h with pump running, heating system. no memory effect, no deep optionally with discharge • Rechargeable battery can be charged separately and in instrument • TÜV-tested according to 1. BImSchV * Exceptions: Typical wearing parts: / EN 50379 Part 2 for O2, °C, hPa Rechargeable battery and thermocouple (1 and CO with H2-compensation year) NO/COlow sensor (2 years), filter testo 330-1 LL testo 330-1 LL Flue gas analyzer with longlife gas sensors, Bluetooth and H2-compensated CO cell, incl. rech. battery and calibration protocol Set testo 330-1 LL The Longlife set for heating constructors and fitters Flue gas analzyer testo 330-1 LL (O2 and COH2) incl. Bluetooth, Part no. Part no. rech. battery and calibration protocol 0563 3371 70 100-240 V mains unit for mains operation or charging the rechargeable 0632 3306 70 battery in the instrument Combustion air temperature probe, immersion depth 190 mm Hose connection set for separate gas pressure measurement testo Bluetooth printer with mains unit Basic system case flat Flue gas probe length 300 mm, Ø 8 mm, Tmax. 500 °C *Country permits: The BLUETOOTH® radio module used by Testo is permitted for the following countries and may only be used in those countries, i.e. the BLUETOOTH® wireless transmission may not be used in any other country! Europe including all EU member states: Austria, Belgium, Bulgaria, Czech Republic, Cyprus, Denmark, Estonia, Finnland, France, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Sweden, Slovakia, Slovenia, Spain and Turkey; European countires (EFTA): Iceland, Liechtenstein, Norway, Switzerland; Non-European countries: Ukraine, Colombia und El Salvador.8 Additional information at www.testo.com
  9. 9. testo 330-2 LL testo 330-LL – visualizes measurement data graphically Understand flue gas New features of the testo 330 LL: A measuring instrument withgreat analysis at a glance • Colour graphic display with 240 x ease of communication: The new colour graphic display of 320 Pixel • Powerful memory management: the flue gas analyzer testo 330 LL • Graphic processing of measurement 500,000 readings visualizes the measurement data data • IrDa/ Bluetooth interface for data graphically: Self-explanatory • New instrument design transfer to Pocket-PC / laptop / graphic curves as well as easy printer • Instrument diagnosis function uses symbols and clear colour design easy "traffic light presentation to • USB interface for data readout to a ease the analysis of the enable comprehensive error PC software measurement data considerably. diagnosis, diagnosis of sensors and • ZIV (Central Guild Association) driver The central element of the new the call-up of instrument information for all standard industry software graphic processing of the such as the filling level of the packages condensate trap and the battery measurement data is the flue gas Only for testo 330-2 LL status matrix. • In CO measurement, from 8.000 • Logger function for long-term ppm, automatic dilution is carried out In the course of the flue gas measurements up to min. 30,000 ppm CO measurement, this shows • New measurement menus, e. g. Gas • Integrated gas and draught zeroing whether the CO and O2 values, pipe test without probe removal: The probe as well as other measurement • Pressure measurement up to 300 can remain in the flue during zeroing parameters, are in the green, mbar permitted range, and the heating • User-defined fuels system is thus optimally adjusted. Thumb symbols instantly show Other features: the status of the system. If the CO • Reduced follow-on costs thanks to WARR AN LL sensors with 4 years’ guarantee 4 YEAR TY: and O2 concentrations measured S* are in the green range, the • Life expectancy up to 6 years (O2 / thumbs point up. If the recorded CO) measurement values are not • At least 1 sensor replacement is within the optimum range, the saved in the course of a normal EN 50379-2 and symbols of the flue gas matrix working life 1. BImSchV provide important information for • Powerful Li-ion rechargeable battery the required adjustment of the - life: >6 h with pump running, heating system. no memory effect, no deep discharge optionally with • Rechargeable battery can be charged separately and in instrument • TÜV-tested according to 1. BImSchV * Exceptions: Typical wearing parts: Rechargeable battery and thermocouple (1 / EN 50379 Part 2 for O2, °C, hPa year) NO/COlow sensor (2 years), filter and CO with H2-compensation testo 330-2 LLtesto 330-2 LL Flue gas analyzerwith longlife gas sensors, Bluetoothand H2-compensated CO cell aswell as integrated draught and gaszeroing, incl. rech. battery andcalibration protocol Part no.0632 3307 70 Set testo 330-2 LL Set testo 330-2 LL The Longlife set for customer service and maintenance technicians The Longlife set for service technicians and and inspectors Flue gas analzyer testo 330-2 LL (O2 and COH2) incl. Bluetooth, Part no. with fine pressure probe rech. battery and calibration protocol 0563 3372 70 Flue gas analzyer testo 330-2 LL (O2 und COH2) incl. Bluetooth, Part no. 100-240 V mains unit for mains operation or charging the rechargeable rech. battery and calibration protocol 0563 3372 71 battery in the instrument 100-240 V mains unit for mains operation or charging the rechargeable Combustion air temperature probe, immersion depth 190 mm battery in the instrument Hose connection set for separate gas pressure measurement Combustion air temperature probe, immersion depth 190 mm testo Bluetooth printer with mains unit testo Bluetooth printer with mains unit Basic system case flat Easyheat software testo 330 for PC Flue gas probe length 300 mm, Ø 8 mm, Tmax. 500 °C USB connection cable, instrument-PC Flue gas probe length 300 mm, Ø 8 mm, Tmax. 500 °CSet testo 330-2 LL Fine pressure probe The Longlife set for inpectors Capillary hosesFlue gas analzyer testo 330-2 LL (O2 und COH2) incl. Bluetooth, Part no. Surface probe angled 90°rech. battery and calibration protocol 0563 3372 72 Connection cable for surface probe100-240 V mains unit for mains operation or charging the rechargeable Straight Pitot tubebattery in the instrument Heating check retrofit CDCombustion air temperature probe, immersion depth 190 mm Basic system case with double floor for instrument,Smoke tester testo 308 probes and further accessoriesSoot pump holder *Country permits: The BLUETOOTH® radio module used by Testo is permitted for the following countries and may onlyFlue gas probe length 300 mm, Ø 8 mm, Tmax. 500 °C be used in those countries, i.e. the BLUETOOTH® wireless transmission may not be used in any other country! EuropeBasic system case with double floor for instrument, probes including all EU member states: Austria, Belgium, Bulgaria, Czech Republic, Cyprus, Denmark, Estonia, Finnland, France, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Luxembourg, Malta, Netherlands, Poland, Portugal,and further accessories Romania, Sweden, Slovakia, Slovenia, Spain and Turkey; European countires (EFTA): Iceland, Liechtenstein, Norway, Switzerland; Non-European countries: Ukraine, Colombia und El Salvador. Additional information at www.testo.com 9
  10. 10. testo 330-LL Technical data testo 330-LL Temperature Meas. range -40 to +1200 °C measurement Accuracy (±1 digit) ±0,5 °C (0.0 to +100.0 °C) ±0,5 % of mv (remaining range) Resolution 0.1 °C (-40 to 999,9 °C) 1 °C (remaining range) Draught Meas. range -9.99 to +40 hPa measurement Accuracy (the greater ±0.02 hPa or ±5% of mv (-0.50 to +0.60 hPa) value applies) ±0.03 hPa (+0.61 to +3.00 hPa) ±1.5% of mv (+3.01 to +40.00 hPa) Resolution 0.01 hPa Pressure Meas. range 0 to 300 hPa measurement Accuracy (±1 digit) ±0.5 hPa (0.0 to 50.0 hPa) ±1% of mv (50.1 to 100.0 hPa) ±1.5 % of mv (remaining range) Resolution 0.1 hPa O2 measurement Meas. range 0 to 21 Vol. % Accuracy (±1 digit) ±0.2 Vol. % Resolution 0.1 Vol. % Response time t90 〈 20 s testo 330-1 LL CO Meas. range 0 to 4000 ppm measurement Accuracy (±1 digit) ±20 ppm (0 to 400 ppm) (without H2 ±5% of mv (401 to 1000 ppm) compensation) ±10% of mv (1001 to 4000 ppm) Resolution 1 ppm Response time t90 〈60 s testo 330-2 LL CO measurement Meas. range 0 to 8000 ppm (H2 compensation) Accuracy (±1 digit) ±10 ppm or ±10% of mv (0 to 200 ppm) ±20 ppm or ±5% of mv (201 to 2000 ppm) ±10% of mv (2001 to 8000 ppm) Resolution 1 ppm Response time t90 〈 40 s From 8000 ppm: Display range 8000 to 30000 ppm (automatic dilution) / 500 ppm resolution Efficiency measurement Meas. range 0 to 120% (ETA) Resolution 0.1% Flue gas loss Meas. range 0 to 99.9% Resolution 0.1% CO2 measurement Display range 0 to CO2 max digital calculatio from O2 Accuracy (±1 digit) ±0.2 Vol. % Resolution 0.1 Vol. % Response time t90 〈 40 s Option: NOlow Meas. range 0 to 300 ppm measurement Accuracy (±1 digit) ±2 ppm (0.0 to 40.0 ppm) ±5% of mv (remaining range) Resolution 0.1 ppm Response time t90 〈30 s Option: NO Meas. range 0 to 3000 ppm measurement Accuracy (±1 digit) ±5 ppm (0 to 100 ppm) ±5% of mv (101 to 2000 ppm) ±10% of mv (2001 to 3000 ppm) Resolution 1 ppm Response time t90 〈30 s Ambient CO Meas. range 0 to 500 ppm measurement (with CO Accuracy (±1 digit) ±5 ppm (0 to 100 ppm) probe) ±5% of mv (>100 ppm) Resolution 1 ppm Response time t90 Approx. 35 s Gas leak measurement Display range 0 to 10,000 ppm CH4 / C3H8 for combustible gases Signal Optical display (LED) (with gas leak detection Audible display via buzzer probe) Adjustment time t90 〈2s Ambient CO2 Meas. range 0 to 1 Vol. % measurement (with 0 to 10000 ppm ambient CO2 probe) Accuracy (±1 digit) ±(50 ppm ±2% of mv) (0 to 5000 ppm) Response time t90 Approx. 35 s Warranty testo 330-1 LL/-2 LL Instrument/probe/gas sensors (O2, CO) 4 years NO, NOlow sensor 2 years Thermocouple and battery 1 year10 Additional information at www.testo.com
  11. 11. testo 330-LL Suitable probes at a glance Modular flue gas probes Illustration Tmax Part no.Flue gas probe, 180 mm long, Ø 8 mm, Tmax 180 mm +500 °C Modular flue gas 0600 9760500 °C, TÜV approval Ø 8 mm probes, available inFlue gas probe, 300 mm long, Ø 8 mm, Tmax 300 mm +500 °C 0600 9761500 °C, TÜV approval Ø 8 mm 2 lengths, incl.Flue gas probe, 180 mm long, Ø 6 mm, Tmax 180 mm +500 °C 0600 9762500 °C Ø 6 mm probe stop, NiCr-NiFlue gas probe, 300 mm long, Ø 6 mm, Tmax 300 mm +500 °C thermocouple, 0600 9763500 °C Ø 6 mm 2.2m hose andFlexible flue gas probe, 330 mm long, Tmax. 180 °C, 0600 9764short-term 200 °C, bending radius max. 90° formeasuring at inaccessible points particle filter Probe accessories Illustration Tmax Part no.Probe shaft, 180 mm long, Ø 8 mm, +500 °C 0554 9760 180 mmTmax 500 °C Ø 8 mmProbe shaft, 180 mm long, Ø 6 mm, +500 °C 0554 9762 180 mmTmax 500 °C Ø 6 mmProbe shaft, 300 mm long, Ø 8 mm, 300 mm +500 °C 0554 9761Tmax 500 °C Ø 8 mmProbe shaft, 335 mm long, with probe 335 mm +1000 °C 0554 8764stop, Ø 8 mm, Tmax 1000 °C Ø 8 mmProbe shaft, 700 mm long, with probe 700 mm +1000 °C 0554 8765stop, Ø 8 mm, Tmax 1000 °C Ø 8 mmFlexible probe shaft, 330 mm long, Ø 330 mm +180 °C 0554 976410 mm, Tmax 180 °C Ø 10 mmMulti-hole probe shaft, 300 mm long, Ø 8 mm, for mean CO calculation 0554 5762Multi-hole probe shaft, 180 mm long, Ø 8 mm, for mean CO calculation 0554 5763Hose extension, 2.8 m, extension cable for probe and analyser 0554 12028 mm probe stop, steel, with spring clamp and handle, Tmax 500 °C 0554 33306 mm, probe stop, steel, with spring clamp and handle, Tmax 500 °C 0554 3329 Additional probes Illustration Meas. range Accuracy Part no.Dual wall clearance probe for O2 supply air 0632 1260measurementGas leak probe 0 to +10000 ppm CH4 / C3H8 0632 3330Ambient CO probe, for detecting CO in buildings Fixed cable 1.5 m 0 to +500 ppm CO ±5% of mv (+100.1 to +500 ppm CO) 0632 3331and rooms ±5 ppm CO (0 to +100 ppm CO)Ambient CO2 probe Plug-in head, connection 0 ... +1 Vol. % CO2 ±(50 ppm CO2 ±2% of mv)(0 to +5000 ppm CO2) 0632 1240 cable 0430 0143 or 0430 0 ... +10000 ppm ±(100 ppm CO2 ±3% of mv)(+5001 to +10000 0145 required CO2 ppm CO2)Connection cable 0430 0143Fine pressure probe for testo 330 LL 0638 0330 Additional information at www.testo.com 11
  12. 12. testo 330-LL Suitable probes at a glance / Accessories Ambient air temperature probes Illustration Meas. range Accuracy t99 Part no. Combustion air temperature probe, immersion depth 300 300 mm 0 to +100 °C ±0.5 °C (0 to +100 °C) 30 s 0600 9791 mm Ø 5 mm Combustion air temperature probe, immersion depth 190 190 mm 0 to +100 °C 0600 9787 mm Ø 4 mm Combustion air temperature probe, immersion depth 60 mm 60 mm 0 to +100 °C ±0.5 °C (0 to +100 °C) 30 s 0600 9797 Ø 4 mm Temperature probes Illustration Meas. range Accuracy t99 Part no. Mini ambient air probe, Tmax +80°C, for 0 to +80 °C 0600 3692 separate ambient air temperature measurement Pipe wrap probe for pipes with diameter of up to -60 to +130 °C Class 2 5s 0600 4593 2", for flow/return temp. meas. in hydronic systems Fast-action surface probe with sprung 150 mm -200 to +300 °C Class 2 3s 0604 0194 thermocouple strip, for measurements on floor Ø 10 mm heating, radiators, insulations... Plug-in head, connection cable 0430 0143 or 0430 0145 required Connection cable 0430 0143 Measuring instruments with options Part no. EUR Accessories Zubehör Part no. testo 330-1 LL flue gas analyzer with longlife gas sensors (not H2- Transport and Protection 0632 3306 compensated), incl. rech. battery and calibration protocol Basic system case for analyzer, probes and accessories 0516 3330 testo 330-2 LL flue gas analyzer with longlife gas sensors with integrated draught and gas zeroing, incl. O2/CO cell (not H2- 0632 3307 compensated), incl. rech. battery and calibration protocol Basic system case with two levels for analyser, probes and additional 0516 3331 accessories Option: Fine draught measurement, rResolution 0.1 Pa, measurement range to 100 Pa (instead of the standard draught measurement) Tools system case with tools section, without contents, attachable to basic 0516 0329 system case Option fine differential pressure measurement Versatile system case without sections, attachable to basic system case, For 0516 0331 Option: NO sensor, meas. range 0 to 3000 ppm, 1 ppm resolution easy storage of analyser and additional accessories Option H2-compensated CO cell Measurement case (leather) with drawers for instruments and accessories 0516 0303 Option COlow sensor Option Bluetooth Spare gas sensors Part no. EUR O2 sensor for testo 330-1 LL/-2 LL 0393 0002 CO sensor (without H2-compensation) for testo 330-1 LL/-2 LL 0393 0051 CO sensor (H2-compensated) for testo 330-1 LL/-2 LL 0393 0101 COlow sensor 0 to 300 ppm for testo 330-1 LL/-2 LL 0393 0103 NO sensor 0 to 3000 ppm for testo 330-1 LL/-2 LL 0393 0151 Retrofit NO sensor, measuring range 0 to 3000 ppm, 0554 2151 resolution 1 ppm, for testo 330-1 LL/-2LL Retrofit COlow sensor, Measuring range 0 -to 300 ppm, 0554 2103 resolution 0.1 hPa, for testo 330-1 LL/-2 LL Accessories Part no. EUR 100-240 V AC / 6.3 V DC international mains unit, for mains operation 0554 1096 or battery charging in instrument Spare battery 2600 mA 0515 0107 Charger for spare battery 0554 1103 Testo fast printer with wireless infrared interface, 1 roll thermal paper 0554 0549 and 4 AA batteries BLUETOOTH® printer set with wireless Bluetooth interface, incl. 1 roll 0554 0553 thermal paper, rechargeable battery and mains unit Spare thermal paper for printer (6 rolls), permanent ink 0554 0568 Readout adapter for automatic furnaces 0554 1206 Adhesive pockets (50 off) for printout, paper barcode labels... 0554 0116 Instrument cleaner (100 ml) 0554 1207 Smoke tester with oil, soot sheet, for measuring soot in flue gas 0554 0307 Hose connection set for separate gas pressure measurement 0554 1203 Pressure set for testing gas line 0554 1213 Differential temperature set consisting of 2 pipe clamp probes and adapter 0554 1204 Spare particle filter (10 off) for probe handle 0554 3385 easyheat PC analysis software, shows measurement in form of 0554 3332 diagrams, tables and manages customer data. Please order USB cable 0449 0047 separately. Full version EasyHeat + EasyHeat Mobile (for PC und PDA) 0554 1210 USB connection cable, instrument to PC 0449 0047 ISO calibration certificate/flue gas 0520 000312 Additional information at www.testo.com
  13. 13. testo 340 330-LL Understand flue Technical data gas analysis at a glanceThe advantages of the new flue gas analyzer testo 330 LL:• High-resolution colour display for the graphic representation of your measurement data• Extended measurement menus such as Tightness testing for comprehensive analysis of the heating system• Logger function for easy long-term recording of the measurement curve 18.01.10 14:35 18.01.10 14:35 14.09.09 14:35 Testo AG Testo AG Testo AG Natural gas Natural gas Natural gas Measurements Measurements Folders Flue gas Fuels Fine pressure probe Protocols Draught measurement Instrument settings Sensor settings CO undiluted Program Smoke count/ HCT Instrument diagnosis Differential temperature OK Fuel OK Location OptionsMain menu – select adjustment function Select one of the pre-set measurements Measurement data can be graphically visualized and quickly analyzedThe measurement menus Flue gas Smoke number/HCT Oil flow rate Draught measurement Differential pressure CO ambient Fine pressure probe Differential temperature CO2 ambient BImSchV O2 input air Automatic burner CO undiluted Gas flow rate Gas pipe tests Further advantages of the flue gas analyzer testo 330 LL: The new instrument design Thanks to the new colour design and the materials used, the instrument is also suitable for use in rough and dirty surroundings. Additional information at www.testo.com 13

×