Shristi Society for Sustainable Rural Development Multi Craft Product C ATA L O G U ESPONSORED BY:Office of the Development Commissioner,Handicrafts, Ministry of Textiles,Government of India, West Block-7,R.K.Puram, New Delhi - 110066 PUBLISHED BY:Email : firstname.lastname@example.orgWebsite : www.indianhandicrafts.org.in SHRISTITel. : 26163085, 26199466 New Delhi. Kolkata. Ahmedabad
AcknowledgmentsOur sincere thanks toThe Development Commissioner for HandicraftsOffice of the Development Commissioner (Handicrafts)Ministry of Textiles, Govt. of India,West Block-7, R.K.Puram, New Delhi-110 066Tel. : 26106902, Email : email@example.comThe Regional Director (H), Eastern RegionO/o of the Development Commissioner (H)Ministry of Textiles, Govt. of IndiaEastern Regional Office, CGO Complex,A-Wing, 3rd Floor, DF Block,Salt Lake City, Kolkata-700064Tel. : 23345403, Email : firstname.lastname@example.orgThe Assistant Director (H)Marketing and Service Extension CentreO/o of the Development Commissioner (H)Ministry of Textiles, Govt. of India51, G.N. Mitra LaneBurdwan-713101Tel. : 2566523 Email : email@example.com
Prelude edulerPThe popularity of Indian handicrafts has grown quite significantly overthe last decade and the exports, over the years, have steadily grown.Besides, there are about five million rural artisans who need strategicsupport in producing items of high quality for exports. Thus, there isenormous potential for the development of the handicraft sector.For better quality products we need improved technology, consistentquality, and increased focus on R&D. For many traditional crafts, level ofexcellence and master craftsmanship has suffered over the years inrelation to their realizable market/export potential and potential forproviding better incomes. The chief reasons for this being poor accessto required raw materials and capital, mechanization, and stiff pricecompetition, inability to keep pace with market related design andproduct demand, lack of awareness/appreciation by consumers andlack of sustained patronage in these specific traditional crafts.Handicraft products constitute a significant part of the informal sectorof the Indian economy. Product innovation and improvements indesign technologies are therefore necessary for keeping this sectoreconomically sustainable and compete successfully in the globalmarket.
ShristiIn this scenario, Shristi, was founded by the late Shri.Sudipto Mukherjee. A chemical engineer by profession, hewas actively involved in the field of social work. Shristi, a non- governmental organization registered under theSocieties Registration Act of 1860 has been working in the field of handicrafts for the upliftment of the ruralartisan since the last decade. Shristi has worked with DC(H), New Delhi, Ministry of Textiles and has completedfor them various raw material and techno-assessment studies in terracotta, dhokra, stone, metal, natural fibresetc. in 11 states of India. We have also conducted seminars and awareness programmes sponsored by DC(H) andheld exhibitions for handicrafts all over India.Shristis vision is to create self-sustaining, viable producer groups and encourage them to market directly thususing their own inherent skills as a means of employment, income generation and economic self-sufficiency.Shristi with the generous grant-in-aid of the DC(H) implemented the multi-craft Common Facility Centre(CFC)at village Moina, Barasat, West Bengal, under AHVY scheme, where a number of clusters engaged in differentcrafts are present. The objective of the CFC is wide scale dissemination of information and knowledge sharingamong the economically challenged rural artisan to enhance their economic progress. The craftsmen can accessmodern advanced glazing and firing facilities and other equipment. The CFC extends required benefits toartisans engaged in various crafts such as terracotta, cane and bamboo, glass and natural fibres.The CFC has an initial support of 21 SHGs and is technically managed by Shristi. The artisans of the different SHGsbasically belong to the lower socio-economic strata of that area and are in need of appropriate skillenhancement through design and technology intervention. This is imperative so as to make the product morecost effective and marketable.
Shristi in association with the DC(H), has guided craftsmen in the process of developing, designing, costing andthen marketing the product, and suggesting proper usages and investment of the income generated ensuringthat end products so produced are competitive in cost, better in utility services and aesthetic in nature. Trainingin the form of skill upgradation workshops is given on a regular basis to the artisans. This ensures a continuousinput of new designs which are market oriented and bring about value-added items, Further, the craftsmen arealso apprised of the latest technologies in the relevant crafts.Shristi has conducted design and technical development projects on terracotta and on ceramics, workshops onmetal, natural fibres, shitalpati and glass enamel for the cluster artisans. Market assessment and product studytours are also conducted and artisans are taken to visit successful clusters to study the methodology beingfollowed by them and for a knowledge sharing between the two clusters. This has helped the craftsmenbroaden their horizon of knowledge and gain valuable insight into practices of craft and products in otherregions. All this has richly endowed the skills of the cluster artisan and his design base which is amply reflected inthis catalogue.Subsequently, the earnings of the craftsmen have significantly increased as they have been able to introducenew designs and explore new possibilities in their craft. As a result the craftsmen have directly benefited andtheir earnings have been significantly augmented.The catalogue attempts to show case a few of the products that are being produced by the artisans at theCommon Facility Centre at village Moina, Dist. Barasat, West Bengal Delegates of 2day craft based seminar on terracotta craft held at Salt lake Kolkata on 31st march & 1st april 2008, taken on visit to CFC, Moina, Barasat, WB
Shristi 1Terracotta & Ceramics CraftTerracotta is associated with the growth of human civilization on earth. Itstarted with the objective to provide man with cooking pots and pans.Subsequently the craft flourished through the centuries and diversifiedinto decorative items as well which now are known as the handicraft items.Ceramics is a technology dealing with earthen materials and mineralsprocessed, formed and fired or baked finally to give permanency to wares.Ceramics is also the art of shaping and backing clay articles as pottery,earthenware and porcelain. It has been derived from the Greek wordKeramics which means earthen or made of clay or earth. It is the generalart of heating common clay to create a utilitarian or ornamental object. Allpottery and porcelain are considered ceramic.Today under the onslaught of modernity, when traditions and cultures arebeing eroded and corrupted by the availability of mass-produced goods,many common household items are becoming collectors items. For theappreciative and discerning, it is these artifacts of everyday life, likestorage containers for rice and salt, earthenware water jars, cooking potsand incense burners, which are assuming rich forms and ideas, hithertoundiscovered. Utilitarian yet unique, such ordinary articles are as much theresult of a folk craft handed down over the generations as of the collectiveexperience and wisdom of the people.The Process of ManufactureVarious modern machineries are available at the CFC premises, Barasat,which are utilized for training the artisans:Hand-operated wheel and electric motorized wheel are used for makingpottery. Ball mill, Blunger and de-aired pug mill are used for preparing clay.Glazes are prepared in pot mill and spray machine is used for application ofglazes. Wood fired kiln and electric and gas kilns are for improvedproducts. The main raw materials — common clay is collected from thenearest river (Hooghly) and from ponds. The clay is pulverized andscreened and then immersed in water for aging with addition of talcumpowder and barium carbonate. After aging for 48 hrs. the slurry is kept inplaster state to get required consistency / workability. The common andgangetic soil is placed in ball mill and ground with grog (terracotta) &barium carbonate and then the slurry is kept in blunger. The propeller isrotated for a few hours, and then the mixture is sucked by slurry pump tofilter press. The extra water is allowed to pass out and the clay slab is takenout of the filter press and placed in pug mill machine. The roll of clay is cutin regular intervals and placed on potters wheel for production. Theprocessed clay is then utilized in shaping a variety of items. The materialsare dried in the open air. The first firing or biscuit firing of the earthenwareproducts is done in a wooden furnace at 9000C. The clay objects becomeporous in the course of biscuit firing. In just a few seconds they absorb theraw glaze which is, in effect, liquid glass. Glaze application is done bydipping, pouring, brushing and spraying methods. The glazed objects arethen given a glost firing at temperatures of 1000-10400C.
14 Shristi Cane & Bamboo In India, cane and bamboo have since ancient history given form to the expression of tribal art and provided them livelihood. Today it adorns the homes of the rich and elite and mud-houses alike. Many useful as well as decorative items are made out of these. Baskets and mats are the most popular items in this category. The best-known places for basketry and mats are Assam and Bengal. Bengal has an ancient tradition in making cane and bamboo items which are rich and varied. Initially bamboo crafts were limited to hand fans, sieves, fish traps of various types, kulas etc. but now with time, the crafts have diversified into various decoration and utility items like furniture, letter holders, candle stands etc.
Shristi 17Palm WoodPalm wood is a hardwood timber from palm trees, most commonlyassociated with the Coconut Palm, but also including the Date Palm. Onlyin very recent years have people begun to explore the potentialcommercial uses for this vast, alternative supply of wood. This led to thecommercial launch of Palm wood in a range of different products, fromflooring to furniture to decorative products. With these productsperforming at equal to or even better than conventional hardwoods, Palmwood represents a viable substitute for endangered hardwoods from anecologically-sound source.Due to its beautiful grain and attractive natural appearance, it is ideal forhigh value wood products which include furniture, decorative interiorwalls, parquet floors, various novelties and curio items like ash trays, plates,bowls, vases, etc. which are equally, if not more than, comparable to thetraditional wood species commonly used in the furniture industry as far asappearance is concerned.
Shristi 19Coconut CraftCoconut shell craft is a popular craft where coconut trees are found inabundance. A high degree of skill is required for carving coconut shell as itis hard. The common products are cups, flower vases, snuff boxes, sugarbowls, nut bowls, powder boxes and spoons etcThe outer surface of the shell is rubbed with steel wool and the inner part issmoothened with a chisel. Then the shells are used to make severalaesthetic pieces by cutting, fitting, painting etc. A first coat of boot polish isthen used on the surface. Then a final coat of French polish is added to thewhole. The fibres are also passed through some cleansing treatments.Then they are smoothened and finally used for making an attractive anddecorative utility piece.
Shristi 21 Shital PatiThe shitalpati is a kind of mat found in Bengal, Assam and Tripura. These arewoven with flat strips in check, twill or zigzag designs, sometimesincorporating stylized human and animal forms. A special kind of canewhich is known as Mutra cane is the basic or the raw material for preparingshitalpati.The fibre has to be soaked in cold water first for 20-30 minutes to obtainmaximum water soaking and also to remove the cellulose, grease oil etcwhich are present in the natural fibers. The water, ratio 1: 20 (1 kg rawmaterial and water 20 liters) is taken and set to boil. 200cc of hydrogenperoxide is added to the water & stirred well. After 5 minutes, 100 cc ofsodium silicate is added to the same water solution and stirred well andallowed to boil. Finally liquid ammonia of 50 cc is mixed with cold water of1 lit and this solution is added to the previous solution of hydrogenperoxide and sodium silicate & stirred well.Finally the raw material is removed from the cold water and allowed to dripfully and then put in to the bleaching solution of hydrogen peroxide,sodium silicate and liquid ammonia and boiled for 30 minutes The rawmaterial is removed from the solution and cooled for 10-15 minutes. 100 ccof glycerine is taken in 20 litres of water and raw materials soaked for 30minutes and dried in shade and taken for practical work. The fibres are thendyed and the dyed fibre is stitched and integrated with various othermaterials like cane, leather, cloth etc. to make contemporary handicraftproducts like bags, lamps, holders, cushions etc. These are then packagedand marketed.
22 Shristi PRODUCTS 01 STP SRI 07 02 STP SRI 07 03 STP SRI 07 04 STP SRI 07 05 STP SRI 07 06 STP SRI 07 07 STP SRI 07 08 STP SRI 07 09 STP SRI 07 10 STP SRI 07 11 STP SRI 07 12 STP SRI 07
Shristi 2313 STP SRI 07 14 STP SRI 07 15 STP SRI 0716 STP SRI 07 17 STP SRI 07 19 STP SRI 0720 STP SRI 07 21 STP SRI 07 22 STP SRI 0723 STP SRI 07 24 STP SRI 07 25 STP SRI 07