Download this document if link is not clickableRockford Fosgate Punch P300-2 300-Watt StereoAmplifer Price : Check Price Average Customer Rating 5.0 out of 5 Product Feature q Rated Power: 75W x 2 @ 4-Ohms RMS; 150W x 2 @ 2-Ohms RMS; 300W x 1 @ 4-Ohms bridged RMS q 4 Gauge power/ground terminals q 12dB/octave crossover q MOSFET output stage and power supply q One-year limited warranty q Read moreProduct DescriptionRockford Fosgate 300 Watt Stereo amplifer with on-board adjustable crossover, gain control, and PatentedPunch EQ. Amplifier features DTM Thermal management circuitry and MOSFET technology for cleanperformance that does not shut down. CEA Certified RMS Power Rating 75 watts x2 @ 4 Ohms, 150 watts x2 @2 Ohms, 200 watts x1 @ 4 Ohms Briged. Read moreProduct DescriptionThe P300-2 is a solid choice if youre looking to drive coaxial speakers and/or one 4-ohm SVC subwoofer. Withproven PUNCH technology, the P300-2 delivers real Rockford Fosgate power from a small footprint - smallenough to easily fit under any seat. Rockford Fosgate Punch Series Amplification For over 25 years, Punch amplifiers have set the standard in the car audio amplifier industry and they continue to do so today. Its the reason that they have become the most popular amplifiers in the world. Each of the Punch family amplifiers reproduce sonic perfection along with impressive power in a compact chassis.
The P300-2 features an ultra-small footprint, and clean, simple design that looks great no matter where its installed. Click to enlarge. All connections are recessed into the amplifiers chassis and located on the bottom edge of the P300-2, for a clean, uncluttered install that looks great in any car. Click to enlarge.P300-2 FeaturesFeatures:12dB/octave crossover4 Gauge power/ground terminalsAudiophile grade speaker connectionsMOSFET output stageMOSFET power supplyTop Mounted LED IndicatorsCEA-2006 CompliantPower ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines meanyour amplifiers output power ratings are REAL POWER numbers, not inflated marketing ratings.Differential InputsDifferential input circuitry measures the voltage of both the (+) and (-) input signal. The circuitry subtracts thevoltage common to both conductors (noise) resulting in only the clean signal. This allows only clean signal toenter the amplifier.DSM (Discrete Surface Mount)DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from other discretecomponents and lowers operating temperature.Dynamic Thermal ManagementEvenly distributes excess heat across entire amplifier heatsink.MEHSA3
MEHSA3 reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output devicelife span.NOMADNOMAD is a "real time" analog computer that protects your amplifier from shorting speaker wires anddangerously low speaker impedances.Punch EQ2Onboard equalizer with up to +18dB @ 35Hz and/or up to +12dB boost at 12kHz.TO-247 MOSFETsRockford Fosgate amps use custom TO-247 MOSFETs. These have 60% more metal tab area for more powercapacity, lower impedance and improved heat dissipation over traditional TO-220 MOSFETs found in competitoramps.TRANS·anaTrans·ana simplifies the signal path of the amplifier allowing the signal to travel through the amplifier at a lowervoltage. The result is greater reliability and exceptional sound quality.P300-2 SpecificationsNumber of Channels: 2Rated Power: 75 Watts RMS x 2 @ 4-Ohms 150 Watts RMS x 2 @ 2-Ohms 300 Watts RMS x 1 @ 4-Ohms Bridged/MonoTotal Power: 300 WattsDynamic Power: 114 Watts x 2 @ 4-Ohms 0 degrees Res 184 Watts x 2 @ 2-Ohms 0 degrees ResBridgeable: YesEfficiency (average): 66% @ 4-Ohm 60% @ 2-OhmCrossover Controls: High-Pass (HP): 50Hz-500Hz 12dB/octave Butterworth Low-Pass (LP): 50-500Hz 12dB/octave ButterworthTone Controls: Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or Punch EQ2 Treble: 0dB to +12dB @ 12kHz Function depends upon LP/AP/HP switch positionSignal Input: Low level: 1 RCA pairSignal Output: n/aPower Input Connector: BlockPower Wire Gauge: 4 AWGSpeaker Output Connector: Screw terminal barrier stripSpeaker Wire Gauge: 8 AWG to 18 AWGHeat Sink Type: Cast aluminumCooling: ConvectionRemote Controls: n/a
Visual Indicators: Power Thermal ProtectCircuit Topology Class: Class A/BFrequency Response: 20Hz to 20kHz +/- 1dBShipping Weight: 6.34 Lbs. (2.87 Kg.)Dimensions (HxWxL): 2.25 x 7.625 x 9.0 (in) 5.71 x 19.37 x 22.80 (cm)Thirty Years of Rockford FosgateRockford Fosgate products have been designed and engineered in Tempe, Arizona since the beginning.Rockfords 30 year reputation is grounded in engineering and manufacturing some of the finest audio productsin the world. The companys no-compromise approach has yielded patented iconic products such as the PunchEQ, Punch 45 amplifier and the 3Sixty integrated signal processor. Today, Rockfords new products push theperformance envelope even further. Each new product is a step forward--they sound bigger, they play louder,and run longer. Rockford never settles for "good enough."The 2010 product line represents the companys core philosophy. Rockfords new amplifiers, speakers andsubwoofers have raised the bar on the competition.Whats in the BoxRockford Fosgate Punch P300-2 300-Watt Stereo Amplifier, Users ManualMore Amplifier Options From Rockford FosgateIf you need more features, step up to the Power Series T400-2.On a Tighter Budget? Rockfords also got you covered. Consider the Prime Series R150-2.Rockford Fosgate Punch Series Power Amplifiers Rockford Fosgate Punch P200-2 200-Watt Stereo Rockford Fosgate Punch P300-1 300-Watt Mono Rockford Fosgate Punch P300-2 300-Watt Stereo Rockford Fosgate Punch P400-1 400 Watt Mono Amplifier Amplifer Amplifer Amplifier