Approved by DDG office Chennai Vide letter No. F/OFPL/151 dated 2/02/2009 Class –Aircraft Rating- A2-Aeroplane 5700 Kg and below Limitation – 1. Cessna 152 2. Cessna 172 3. Cirrus SR22 4. Piper PA34
Class – component Rating –C5 Limitation – 12V/24V Gill Lead Acid battery Location - Chennai
AM MM QM QUALIT QUALITYPP TECH LS Maint Y ENGINEER INSPECTOR
Mr. Anand Jacob Verghese MD Accountable Manager email@example.com Mr. J S Sidhu Dy GM Maintenance Manager firstname.lastname@example.org Mr. S P Singh Chief Engineer Quality Manager email@example.com
Establish and promote the safety and quality policy Ensure necessary resources such as finance, Infrastructure, facilities, tools, eq uipment, Manpower and literature Nominate senior persons for monitoring the quality system. Ensure that all personnel are appropriately trained and qualified to accomplish the work.
Administrate an independent quality system Responsible to Accountable Manager on quality and safety matters Auditing the quality system includes requesting remedial action Planning & implementation of a program of the quality procedures and product Issue / renewal / withdraw of staff certifying authorization.
Approval of maintenance instructions created from approved data. Ensure compliance of all mandatory requirements and technical standards of the Airworthiness Authority within stipulated time
Mr. J S Sidhu BE(Mech), AME DGM orient flights
MM is responsible for ensuring that all maintenance required to be carried out responsible for any corrective action resulting from the quality compliance monitoring Implement of remedial action Defining the initial and continuous training program
Defining the facilities and associated means required and adapted to the scope of activities. Coordinating for procurements, stocking, issue of parts and materials. To lay down procedures for periodic review of stores materials and parts and observance of components shelf life
Mr. Bhanu Pratap Singh AME A & C Base Maintenance in charge
To carry out the inspection and certify the same Supervise the work being done by the technicians Keep up-to-date knowledge about technical requirement and instructions issued from time to time
responsible for providing short and long term plans for compliance of all maintenance requirement develop plans to schedule aircraft, engine, major components for maintenance and modifications ensure that necessary tools, equipment and spares are available in serviceable condition
fore cast and recommends man power, spares and engineering equipments required for line/ base maintenance and workshop. responsible to undertake the necessary corrective and preventive action resulting from Quality compliance monitoring and audit programme
ensuring that technical literature/ publications are revised and kept up to date Manage the AMOS Prepare the document for ARC Maintain aircraft file