As much as we hated trying to remove the clips in the original iPad,
A few screws here and therehold down the LCD screen.
disconnecting itscable, the display can be removed from the iPad 2.
Disconnecting thetouchscreen ribbon cable from its socket on the logic board.
Removing the camera/volume controldaughterboard connector from the logic board.
Next we disconnect the dockconnector ribbon cable from the logic board. After disconnecting the dock connector, we disconnect the speaker connector.
The logic board comes out without a fussafter removing the Phillips screws securing it to the case.
Broadcom BCM5974Broadcom BCM5973KFBGH CKFBGH capacitative Microcontroller used for touchscreen controller touchscreen
Wi-Fi board is attached to thelogic board under one of theEMI shields.
The Wi-Fi board; powered by another Broadcom chip, a BCM43291HKUBC. Broadcom has made this Wi-Fi/Bluetooth/FM tuner combo chip a ubiquitous part for smartphones
touchscreen line driver, workingwith the Broadcom BCM5973 and BCM5974 chips Toshiba TH58NVG7D2FLA89 16GB NAND Flash S6T2MLC N33C50V Power Management IC Apple 1GHz A5 dual-core ProcessorApple 343S0542 - this looks like with a 200MHz bus and 512 MB ofthe Dialog Semi power Samsung manufactured RAM.management chip
Toshiba Y890A111222KA, likely aSkyworks 77710 Power Amplifier DRAM + flash MCP Module Qualcomm PM8028 Power Management IC Skyworks 77711 Qualcomm MDM6600 Baseband/RF Power Amplifier Transceiver Module
nfineon 338S0626 GSM/W- Skyworks & TriQuint Transmit CDMA Transceiver Modules Broadcom BCM4751 Integrated MonolithicInfineon 337S3833 Baseband GPS Receiver; Processor Intel 36MY1EF containing 128Mb of Numonyx NOR flash and Elpida Mobile DDR SDRAM