SlideShare a Scribd company logo
TYPES
OF
SOLDERING
By,
Melwin D’mello
M.E (Welding Engineering)
Department of Manufacturing Engineering,
ANNAMALAI UNIVERSITY
CONTENTS
 Soldering
 Types of soldering
 Hand soldering
 Flame soldering
 Furnace soldering
 Hot gas blanket soldering
 Applications
2
SOLDERING
 Soldering is a process in which two or more materials
(usually metal) are joined together by melting with the
filler material into the joint.
 Normally the filler metal having a lower melting point
(below 450°C) than the base metal.
 The solder does not melt the base metal but by
dissolving a small amount of it to form a layer of
intermetallic compound.
3
TYPES OF SOLDERING
1. Hand Soldering
2. Flame Soldering
3. Furnace Soldering
4. Hot Gas Blanket Soldering
5. Dip Soldering
6. Wave Soldering
7. Laser Soldering
8. Resistance Soldering
9. Induction Soldering
10. Ultrasonic Soldering
4
HAND SOLDERING
5
Hand Soldering
6
Hand Soldering
7
Solder Feeding
8
Soldering Iron Operation
9
FLAME SOLDERING
10
Flame Soldering
 Soldering is done under direct flame.
 oxy-acetylene or air-acetylene torch can be se depending on
the temperature required.
 Different sized interchangeable and portable torch are used to
control flame to a fine tip.
 The solder is applied manually.
 Flame soldering is usually used in plumbing trade for soldering
copper tubing to copper fittings.
11
Flame Soldering Process
12
FURNACE SOLDERING
13
Furnace Soldering
 Furnace soldering is a semiautomatic process
 It is done under controlled temperature and uniform
heating atmosphere.
 Normally the process is carried under inert gas
atmosphere or in vacuum
 This process is best suitable for mass production
14
Soldering Furnace
15
Soldering Furnace
16
HOT GAS BLANKET
SOLDERING
17
Hot Gas Blanket Soldering
 Here, the heat transfer between gas and the material to
be heated is relatively low.
 The bodies of the components positioned in the stream
of gas are often heated more rapidly.
 Hot gas provides a suitable method of heating,
especially in small scale production.
 The temperature of gas is set to about 4000 C
18
Hot Gas Blanket Soldering
Equipment 19
APPLICATIONS
 Electronic industry.
 Jointing automobile radiator cores.
 Plumbing and fittings.
 Electrical industry for joining wires.
20
References
1. “Welding Process and Technology” : by Dr. R.S Parmar
2. “Welding Process and Technology” : by O.P Khanna
3. “Welding Engineering and Technology” : by Dr. R.S
Parmar
21
THANK YOU
Electronic industry
22

More Related Content

What's hot

Arc welding
Arc weldingArc welding
Arc welding
Jaya Teja
 
Welding and its types
Welding and its types Welding and its types
Welding and its types
NUST Stuff
 
Shielded Metal Arc Welding
Shielded Metal Arc WeldingShielded Metal Arc Welding
Shielded Metal Arc Welding
Isaac Ayuba M.
 
Resistance welding
Resistance weldingResistance welding
Resistance welding
Pravinkumar
 
Soldering Training PPT
Soldering Training PPTSoldering Training PPT
Soldering Training PPT
ANANT PATIL
 
Soldering
SolderingSoldering
Soldering
callr
 
Soldering ppt | use of soldering | application of soldering |
Soldering ppt | use of soldering | application of soldering | Soldering ppt | use of soldering | application of soldering |
Soldering ppt | use of soldering | application of soldering |
NITESH POONIA
 
spot welding
spot weldingspot welding
spot welding
Asif Hussain
 
welding
weldingwelding
welding
illpa
 
Spot welding
Spot weldingSpot welding
Spot welding
sandipanc95
 
Arc welding
Arc weldingArc welding
Arc welding
Amol Khichade
 
PPT PRESENTATION OF WELDING
PPT PRESENTATION OF WELDINGPPT PRESENTATION OF WELDING
PPT PRESENTATION OF WELDING
Surendra Kumar Dewangan
 
Proper Soldering process
Proper Soldering processProper Soldering process
Proper Soldering process
Machine shop ni Don Bosco
 
arc welding
arc weldingarc welding
Atomic hyrogen arc welding
Atomic hyrogen arc weldingAtomic hyrogen arc welding
Atomic hyrogen arc welding
Ilyas Hussain
 
Introduction to Surface Mount Technology
Introduction to Surface Mount TechnologyIntroduction to Surface Mount Technology
Introduction to Surface Mount Technology
ABDUL MUNAFF
 
Types of welding
Types of weldingTypes of welding
Types of welding
Nisarg Amin
 
What is a soldering ??
What is a soldering ??What is a soldering ??
What is a soldering ??
arunavasava
 
introduction to soldering and de-soldering
introduction to soldering and de-solderingintroduction to soldering and de-soldering
introduction to soldering and de-soldering
VARUN KUMAR
 
Soldering and brazing
Soldering and brazingSoldering and brazing
Soldering and brazing
Aakash Zafar
 

What's hot (20)

Arc welding
Arc weldingArc welding
Arc welding
 
Welding and its types
Welding and its types Welding and its types
Welding and its types
 
Shielded Metal Arc Welding
Shielded Metal Arc WeldingShielded Metal Arc Welding
Shielded Metal Arc Welding
 
Resistance welding
Resistance weldingResistance welding
Resistance welding
 
Soldering Training PPT
Soldering Training PPTSoldering Training PPT
Soldering Training PPT
 
Soldering
SolderingSoldering
Soldering
 
Soldering ppt | use of soldering | application of soldering |
Soldering ppt | use of soldering | application of soldering | Soldering ppt | use of soldering | application of soldering |
Soldering ppt | use of soldering | application of soldering |
 
spot welding
spot weldingspot welding
spot welding
 
welding
weldingwelding
welding
 
Spot welding
Spot weldingSpot welding
Spot welding
 
Arc welding
Arc weldingArc welding
Arc welding
 
PPT PRESENTATION OF WELDING
PPT PRESENTATION OF WELDINGPPT PRESENTATION OF WELDING
PPT PRESENTATION OF WELDING
 
Proper Soldering process
Proper Soldering processProper Soldering process
Proper Soldering process
 
arc welding
arc weldingarc welding
arc welding
 
Atomic hyrogen arc welding
Atomic hyrogen arc weldingAtomic hyrogen arc welding
Atomic hyrogen arc welding
 
Introduction to Surface Mount Technology
Introduction to Surface Mount TechnologyIntroduction to Surface Mount Technology
Introduction to Surface Mount Technology
 
Types of welding
Types of weldingTypes of welding
Types of welding
 
What is a soldering ??
What is a soldering ??What is a soldering ??
What is a soldering ??
 
introduction to soldering and de-soldering
introduction to soldering and de-solderingintroduction to soldering and de-soldering
introduction to soldering and de-soldering
 
Soldering and brazing
Soldering and brazingSoldering and brazing
Soldering and brazing
 

Similar to Types of Soldering

Mudasser
MudasserMudasser
Mudasser
zahid ashfaq
 
FINAL WELDING UNIT 4 manufacturing process.pptx
FINAL WELDING UNIT 4 manufacturing process.pptxFINAL WELDING UNIT 4 manufacturing process.pptx
FINAL WELDING UNIT 4 manufacturing process.pptx
geyepnterd
 
WELDING Presentation.ppt
WELDING Presentation.pptWELDING Presentation.ppt
WELDING Presentation.ppt
BenuMadhab
 
WELDING Presentation.ppt
WELDING Presentation.pptWELDING Presentation.ppt
WELDING Presentation.ppt
IzzatTammam
 
Introduction to WELDING Technology Presentation.ppt
Introduction to WELDING Technology  Presentation.pptIntroduction to WELDING Technology  Presentation.ppt
Introduction to WELDING Technology Presentation.ppt
VidyaTiwari2
 
W1.ppt
W1.pptW1.ppt
Brazing with Induction Heating
Brazing with Induction HeatingBrazing with Induction Heating
Brazing with Induction Heating
Brett Daly
 
Heat treatment 2
Heat treatment 2Heat treatment 2
Heat treatment 2
senthamarai kannan
 
Welding techniques
Welding techniquesWelding techniques
Welding techniques
abdulqadir ezzy
 
Dental Soldering, Welding and Brazing.pptx
Dental Soldering,   Welding and Brazing.pptxDental Soldering,   Welding and Brazing.pptx
Dental Soldering, Welding and Brazing.pptx
Abhidha Tripathi
 
weld metal temperature measurement device
weld metal temperature measurement deviceweld metal temperature measurement device
weld metal temperature measurement device
ekta kumari
 
group 7
group 7group 7
Advance Welding Process
Advance Welding ProcessAdvance Welding Process
Advance Welding Process
Sk Samsuddin
 
Tig welding ppt overview
Tig welding ppt overviewTig welding ppt overview
Tig welding ppt overview
Abhishek Agyarapu
 
Metal Joining Processes: Welding, Riveting, Bolting, Brazing, Soldering
Metal Joining Processes: Welding, Riveting, Bolting, Brazing, SolderingMetal Joining Processes: Welding, Riveting, Bolting, Brazing, Soldering
Metal Joining Processes: Welding, Riveting, Bolting, Brazing, Soldering
JJ Technical Solutions
 
Welding+process
Welding+processWelding+process
Welding+process
Lakhwant Singh Khalsa
 
Ch-19 Gas Welding, Gas Cutting & Arc Welding.pptx
Ch-19 Gas Welding, Gas Cutting & Arc Welding.pptxCh-19 Gas Welding, Gas Cutting & Arc Welding.pptx
Ch-19 Gas Welding, Gas Cutting & Arc Welding.pptx
VishwajeetGupta11
 
Welding p
Welding pWelding p
Welding p
Yasir Waqas
 
Introduction to welding
Introduction to weldingIntroduction to welding
Introduction to welding
Mani Das
 
CHAPTER 4 welding.pptx
CHAPTER 4 welding.pptxCHAPTER 4 welding.pptx
CHAPTER 4 welding.pptx
palanimuthukoothan
 

Similar to Types of Soldering (20)

Mudasser
MudasserMudasser
Mudasser
 
FINAL WELDING UNIT 4 manufacturing process.pptx
FINAL WELDING UNIT 4 manufacturing process.pptxFINAL WELDING UNIT 4 manufacturing process.pptx
FINAL WELDING UNIT 4 manufacturing process.pptx
 
WELDING Presentation.ppt
WELDING Presentation.pptWELDING Presentation.ppt
WELDING Presentation.ppt
 
WELDING Presentation.ppt
WELDING Presentation.pptWELDING Presentation.ppt
WELDING Presentation.ppt
 
Introduction to WELDING Technology Presentation.ppt
Introduction to WELDING Technology  Presentation.pptIntroduction to WELDING Technology  Presentation.ppt
Introduction to WELDING Technology Presentation.ppt
 
W1.ppt
W1.pptW1.ppt
W1.ppt
 
Brazing with Induction Heating
Brazing with Induction HeatingBrazing with Induction Heating
Brazing with Induction Heating
 
Heat treatment 2
Heat treatment 2Heat treatment 2
Heat treatment 2
 
Welding techniques
Welding techniquesWelding techniques
Welding techniques
 
Dental Soldering, Welding and Brazing.pptx
Dental Soldering,   Welding and Brazing.pptxDental Soldering,   Welding and Brazing.pptx
Dental Soldering, Welding and Brazing.pptx
 
weld metal temperature measurement device
weld metal temperature measurement deviceweld metal temperature measurement device
weld metal temperature measurement device
 
group 7
group 7group 7
group 7
 
Advance Welding Process
Advance Welding ProcessAdvance Welding Process
Advance Welding Process
 
Tig welding ppt overview
Tig welding ppt overviewTig welding ppt overview
Tig welding ppt overview
 
Metal Joining Processes: Welding, Riveting, Bolting, Brazing, Soldering
Metal Joining Processes: Welding, Riveting, Bolting, Brazing, SolderingMetal Joining Processes: Welding, Riveting, Bolting, Brazing, Soldering
Metal Joining Processes: Welding, Riveting, Bolting, Brazing, Soldering
 
Welding+process
Welding+processWelding+process
Welding+process
 
Ch-19 Gas Welding, Gas Cutting & Arc Welding.pptx
Ch-19 Gas Welding, Gas Cutting & Arc Welding.pptxCh-19 Gas Welding, Gas Cutting & Arc Welding.pptx
Ch-19 Gas Welding, Gas Cutting & Arc Welding.pptx
 
Welding p
Welding pWelding p
Welding p
 
Introduction to welding
Introduction to weldingIntroduction to welding
Introduction to welding
 
CHAPTER 4 welding.pptx
CHAPTER 4 welding.pptxCHAPTER 4 welding.pptx
CHAPTER 4 welding.pptx
 

More from Melwin Dmello

HOT CRACKS AND COLD CRACKS (Welding)
HOT CRACKS AND COLD CRACKS (Welding)HOT CRACKS AND COLD CRACKS (Welding)
HOT CRACKS AND COLD CRACKS (Welding)
Melwin Dmello
 
MAGNETIC ARC OSCILLATION (MAO) WELDING
MAGNETIC  ARC  OSCILLATION (MAO)  WELDINGMAGNETIC  ARC  OSCILLATION (MAO)  WELDING
MAGNETIC ARC OSCILLATION (MAO) WELDING
Melwin Dmello
 
Gas welding and Gas cutting Basics
Gas welding and Gas cutting BasicsGas welding and Gas cutting Basics
Gas welding and Gas cutting Basics
Melwin Dmello
 
Crack Deformation Modes
Crack Deformation ModesCrack Deformation Modes
Crack Deformation Modes
Melwin Dmello
 
Murex Hot-Cracking Test & Root-Pass Cracking Test
Murex Hot-Cracking Test  & Root-Pass Cracking Test Murex Hot-Cracking Test  & Root-Pass Cracking Test
Murex Hot-Cracking Test & Root-Pass Cracking Test
Melwin Dmello
 
Carburzing and Different Types of Carburzing
Carburzing and Different Types of CarburzingCarburzing and Different Types of Carburzing
Carburzing and Different Types of Carburzing
Melwin Dmello
 
Electron Beam Welding (EBW) Basics
Electron Beam Welding (EBW) Basics Electron Beam Welding (EBW) Basics
Electron Beam Welding (EBW) Basics
Melwin Dmello
 
X-Ray Diffraction and Diffraction Methods BASICS
X-Ray Diffraction and  Diffraction Methods BASICSX-Ray Diffraction and  Diffraction Methods BASICS
X-Ray Diffraction and Diffraction Methods BASICS
Melwin Dmello
 
Smart Metals
Smart MetalsSmart Metals
Smart Metals
Melwin Dmello
 
Power generation in footsteps by Piezoelectric materials
Power generation in footsteps by Piezoelectric materialsPower generation in footsteps by Piezoelectric materials
Power generation in footsteps by Piezoelectric materials
Melwin Dmello
 

More from Melwin Dmello (10)

HOT CRACKS AND COLD CRACKS (Welding)
HOT CRACKS AND COLD CRACKS (Welding)HOT CRACKS AND COLD CRACKS (Welding)
HOT CRACKS AND COLD CRACKS (Welding)
 
MAGNETIC ARC OSCILLATION (MAO) WELDING
MAGNETIC  ARC  OSCILLATION (MAO)  WELDINGMAGNETIC  ARC  OSCILLATION (MAO)  WELDING
MAGNETIC ARC OSCILLATION (MAO) WELDING
 
Gas welding and Gas cutting Basics
Gas welding and Gas cutting BasicsGas welding and Gas cutting Basics
Gas welding and Gas cutting Basics
 
Crack Deformation Modes
Crack Deformation ModesCrack Deformation Modes
Crack Deformation Modes
 
Murex Hot-Cracking Test & Root-Pass Cracking Test
Murex Hot-Cracking Test  & Root-Pass Cracking Test Murex Hot-Cracking Test  & Root-Pass Cracking Test
Murex Hot-Cracking Test & Root-Pass Cracking Test
 
Carburzing and Different Types of Carburzing
Carburzing and Different Types of CarburzingCarburzing and Different Types of Carburzing
Carburzing and Different Types of Carburzing
 
Electron Beam Welding (EBW) Basics
Electron Beam Welding (EBW) Basics Electron Beam Welding (EBW) Basics
Electron Beam Welding (EBW) Basics
 
X-Ray Diffraction and Diffraction Methods BASICS
X-Ray Diffraction and  Diffraction Methods BASICSX-Ray Diffraction and  Diffraction Methods BASICS
X-Ray Diffraction and Diffraction Methods BASICS
 
Smart Metals
Smart MetalsSmart Metals
Smart Metals
 
Power generation in footsteps by Piezoelectric materials
Power generation in footsteps by Piezoelectric materialsPower generation in footsteps by Piezoelectric materials
Power generation in footsteps by Piezoelectric materials
 

Recently uploaded

Casting-Defect-inSlab continuous casting.pdf
Casting-Defect-inSlab continuous casting.pdfCasting-Defect-inSlab continuous casting.pdf
Casting-Defect-inSlab continuous casting.pdf
zubairahmad848137
 
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdfBPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
MIGUELANGEL966976
 
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by AnantLLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Anant Corporation
 
john krisinger-the science and history of the alcoholic beverage.pptx
john krisinger-the science and history of the alcoholic beverage.pptxjohn krisinger-the science and history of the alcoholic beverage.pptx
john krisinger-the science and history of the alcoholic beverage.pptx
Madan Karki
 
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptxManufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
Madan Karki
 
Transformers design and coooling methods
Transformers design and coooling methodsTransformers design and coooling methods
Transformers design and coooling methods
Roger Rozario
 
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
学校原版美国波士顿大学毕业证学历学位证书原版一模一样学校原版美国波士顿大学毕业证学历学位证书原版一模一样
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
171ticu
 
spirit beverages ppt without graphics.pptx
spirit beverages ppt without graphics.pptxspirit beverages ppt without graphics.pptx
spirit beverages ppt without graphics.pptx
Madan Karki
 
Understanding Inductive Bias in Machine Learning
Understanding Inductive Bias in Machine LearningUnderstanding Inductive Bias in Machine Learning
Understanding Inductive Bias in Machine Learning
SUTEJAS
 
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
Yasser Mahgoub
 
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODELDEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
gerogepatton
 
132/33KV substation case study Presentation
132/33KV substation case study Presentation132/33KV substation case study Presentation
132/33KV substation case study Presentation
kandramariana6
 
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressionsKuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
Victor Morales
 
Literature Review Basics and Understanding Reference Management.pptx
Literature Review Basics and Understanding Reference Management.pptxLiterature Review Basics and Understanding Reference Management.pptx
Literature Review Basics and Understanding Reference Management.pptx
Dr Ramhari Poudyal
 
CompEx~Manual~1210 (2).pdf COMPEX GAS AND VAPOURS
CompEx~Manual~1210 (2).pdf COMPEX GAS AND VAPOURSCompEx~Manual~1210 (2).pdf COMPEX GAS AND VAPOURS
CompEx~Manual~1210 (2).pdf COMPEX GAS AND VAPOURS
RamonNovais6
 
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
bijceesjournal
 
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECTCHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
jpsjournal1
 
22CYT12-Unit-V-E Waste and its Management.ppt
22CYT12-Unit-V-E Waste and its Management.ppt22CYT12-Unit-V-E Waste and its Management.ppt
22CYT12-Unit-V-E Waste and its Management.ppt
KrishnaveniKrishnara1
 
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
IJECEIAES
 
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
IJECEIAES
 

Recently uploaded (20)

Casting-Defect-inSlab continuous casting.pdf
Casting-Defect-inSlab continuous casting.pdfCasting-Defect-inSlab continuous casting.pdf
Casting-Defect-inSlab continuous casting.pdf
 
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdfBPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
 
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by AnantLLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
 
john krisinger-the science and history of the alcoholic beverage.pptx
john krisinger-the science and history of the alcoholic beverage.pptxjohn krisinger-the science and history of the alcoholic beverage.pptx
john krisinger-the science and history of the alcoholic beverage.pptx
 
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptxManufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
 
Transformers design and coooling methods
Transformers design and coooling methodsTransformers design and coooling methods
Transformers design and coooling methods
 
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
学校原版美国波士顿大学毕业证学历学位证书原版一模一样学校原版美国波士顿大学毕业证学历学位证书原版一模一样
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
 
spirit beverages ppt without graphics.pptx
spirit beverages ppt without graphics.pptxspirit beverages ppt without graphics.pptx
spirit beverages ppt without graphics.pptx
 
Understanding Inductive Bias in Machine Learning
Understanding Inductive Bias in Machine LearningUnderstanding Inductive Bias in Machine Learning
Understanding Inductive Bias in Machine Learning
 
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
 
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODELDEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
 
132/33KV substation case study Presentation
132/33KV substation case study Presentation132/33KV substation case study Presentation
132/33KV substation case study Presentation
 
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressionsKuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
 
Literature Review Basics and Understanding Reference Management.pptx
Literature Review Basics and Understanding Reference Management.pptxLiterature Review Basics and Understanding Reference Management.pptx
Literature Review Basics and Understanding Reference Management.pptx
 
CompEx~Manual~1210 (2).pdf COMPEX GAS AND VAPOURS
CompEx~Manual~1210 (2).pdf COMPEX GAS AND VAPOURSCompEx~Manual~1210 (2).pdf COMPEX GAS AND VAPOURS
CompEx~Manual~1210 (2).pdf COMPEX GAS AND VAPOURS
 
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
 
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECTCHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
 
22CYT12-Unit-V-E Waste and its Management.ppt
22CYT12-Unit-V-E Waste and its Management.ppt22CYT12-Unit-V-E Waste and its Management.ppt
22CYT12-Unit-V-E Waste and its Management.ppt
 
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
 
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
 

Types of Soldering