L-3 Vertex Aerospace Level II NDI Training certificates and statementsOctavius Blackwood
The document certifies that Mr. Octavius Blackwood meets the requirements for nondestructive testing at Level II in various methods including ultrasonic, eddy current, magnetic particle, and liquid penetrant. He is qualified to perform tests on aerospace equipment and materials, set up equipment, interpret results, train others, and ensure standards are followed. The certification is signed by the Level III examiner and quality manager.
Edgar Smith successfully completed Welder Performance Qualification testing in accordance with the ASME Boiler and Pressure Vessel Code Section IX for Shielded Metal Arc Welding in the 6G position. The testing qualified him for welding on ferrous materials within the ranges specified in his test record. He was tested on June 2 and June 4, 2014 and received certification number 0S1072231.
This document certifies that Ed Miller has completed welding operator training and is approved to work as a welding operator. It was issued in June 2014. The document certifies Ed Miller's qualifications for a particular job role and the date of certification.
This document contains information about an NDT classroom ultrasonic testing course from July 20, 2016. The document was created by Jared Farris and pertains to ultrasonic testing techniques taught in a classroom setting.
This document is a collection of certificates and awards documenting Gerald Robinson's educational achievements and training. It includes certificates for BTEC qualifications in engineering, City & Guilds certificates in programming logic controllers and computer-aided design, and certificates of unit credit from vocational colleges for electrical installation standards and programming. The documents demonstrate Robinson achieved a variety of technical qualifications and training over several years.
Today I attended my first NDT classroom for radiography testing. The instructor provided an overview of x-ray physics and safety procedures. We learned about the equipment used to produce and detect x-rays and how they can be used to inspect materials and components for defects without damaging the part.
Michael Aaron Millington was awarded a Master of Science in Drug Chemistry with Merit from the University of Newcastle upon Tyne's Faculty of Science, Agriculture and Engineering on September 15, 2015. The degree was conferred with distinction and his student registration number is REG-T #00075212.
John James Coady is certified as a Level 1 Welding Inspector according to CSA Welding Standard W178.2-2001. He was certified effective November 11, 2003 with registration number 4290. His certification must be renewed every three years and is subject to adherence of the conditions of the standard.
L-3 Vertex Aerospace Level II NDI Training certificates and statementsOctavius Blackwood
The document certifies that Mr. Octavius Blackwood meets the requirements for nondestructive testing at Level II in various methods including ultrasonic, eddy current, magnetic particle, and liquid penetrant. He is qualified to perform tests on aerospace equipment and materials, set up equipment, interpret results, train others, and ensure standards are followed. The certification is signed by the Level III examiner and quality manager.
Edgar Smith successfully completed Welder Performance Qualification testing in accordance with the ASME Boiler and Pressure Vessel Code Section IX for Shielded Metal Arc Welding in the 6G position. The testing qualified him for welding on ferrous materials within the ranges specified in his test record. He was tested on June 2 and June 4, 2014 and received certification number 0S1072231.
This document certifies that Ed Miller has completed welding operator training and is approved to work as a welding operator. It was issued in June 2014. The document certifies Ed Miller's qualifications for a particular job role and the date of certification.
This document contains information about an NDT classroom ultrasonic testing course from July 20, 2016. The document was created by Jared Farris and pertains to ultrasonic testing techniques taught in a classroom setting.
This document is a collection of certificates and awards documenting Gerald Robinson's educational achievements and training. It includes certificates for BTEC qualifications in engineering, City & Guilds certificates in programming logic controllers and computer-aided design, and certificates of unit credit from vocational colleges for electrical installation standards and programming. The documents demonstrate Robinson achieved a variety of technical qualifications and training over several years.
Today I attended my first NDT classroom for radiography testing. The instructor provided an overview of x-ray physics and safety procedures. We learned about the equipment used to produce and detect x-rays and how they can be used to inspect materials and components for defects without damaging the part.
Michael Aaron Millington was awarded a Master of Science in Drug Chemistry with Merit from the University of Newcastle upon Tyne's Faculty of Science, Agriculture and Engineering on September 15, 2015. The degree was conferred with distinction and his student registration number is REG-T #00075212.
John James Coady is certified as a Level 1 Welding Inspector according to CSA Welding Standard W178.2-2001. He was certified effective November 11, 2003 with registration number 4290. His certification must be renewed every three years and is subject to adherence of the conditions of the standard.