SlideShare a Scribd company logo
Manufacturers of Audio & Video
Products For Radio & TV Broadcasters




          New Products
        Update
               Sept 2010




            w w w.sonifex.co.uk
            t: +44 (0)1933 650 700
            f: +44 (0)1933 650 726
            sales@sonifex.co.uk
AUDIO & VIDEO INTERFACES



                                Redbox - Audio Distribution Amplifiers

                                RB-DA6R                                    6 Way Stereo Distribution Amplifier With RJ45 Connectors
AUDIO DISTRIBUTION AMPLIFIERS




                                The RB-DA6R is a 1U rack-mount high
                                performance 6 way stereo distribution
                                amplifier for splitting a source into a number
                                                                                        balanced and can be wired unbalanced.
                                of different outputs. The amplifier provides
                                                                                        Each output is individually buffered so that a
                                multiple balanced audio outputs using
                                                                                        short circuit on one output won’t affect the             Distortion:     0.01% THD @ 1kHz, ref +8dBu output
                                RJ45 connectors wired to the StudioHub+TM                                                                        Noise:          -100dB unity gain, ref +8dBu output
                                                                                        others. The left and right input gain controls
                                standard *.
                                                                                        (normalising) are pre-set potentiometers                 Connections
                                By using RJ45 outputs, it allows simpler                accessible through the front panel.                      Inputs:         2 x XLR 3 pin female, 1 x RJ45 socket
                                                                                                                                                                 balanced)
                                CAT5 cabling to used to connect the                                                                                              2 x phono sockets (unbalanced)
                                                                                        The output gain may be varied from -8dB
                                amplifier to other products.                                                                                     Outputs:        6 x RJ45 sockets
                                                                                        to 18dB which is useful for normalising                                  (all balanced, can be unbalanced)
                                The RB-DA6R has one stereo input which                  consumer and professional signals to give                Mains Input:    Filtered IEC, switchable 110-120V, or
                                is switchable via a rear panel push switch              outputs of -15dBu and 0dBu respectively.                                 220-240V, fused, 6W max
                                between paralleled balanced inputs (2 x                                                                          Fuse Rating:    Anti-surge fuse 100mA 20 x 5mm (230VAC)
                                                                                          Audio Specification For RB-DA6R                                        Anti-surge fuse 250mA 20 x 5mm (115VAC)
                                XLR sockets or 1 x stereo input on RJ45) and                                                                     Equipment Type
                                                                                          Maximum           +28dBu
                                unbalanced inputs (1 pair of stereo phono                 Input Level:                                           RB-DA6R:      6 way stereo distribution amplifier with
                                sockets).                                                 Maximum           +28dBu                                             RJ45 connectors
                                                                                          Output Level:
                                The unit has 6 stereo outputs on 6 x RJ45                                                                        Physical Specification
                                                                                          Frequency         20Hz to 20kHz ±0.1dB (600Ω load,
                                                                                                                                                 Dimensions       48cm (W) x 10.8cm (D) x 4.2cm (H) (1U)
                                connectors. The unit can also be configured               Response:         ref 1kHz)
                                                                                                                                                 (Raw):           19” (W) x 4.3” (D) x 1.7” (H) (1U)
                                so that 1 mono input can be distributed                   Gain Range:       Adjustable 8dB loss to 18dB gain
                                                                                                            (L & R adjust)                       Dimensions       53cm (W) x 20.5cm (D) x 6cm (H)
                                to 12 outputs by use of a switch which is                                                                        (Boxed):         21” (W) x 8” (D) x 2.4” (H)
                                                                                          Common            >66dB typically
                                                                                                                                                 Weight:          Nett: 1.3kg Gross: 1.9kg
                                recessed on the front panel to prevent it                 Mode Rejection:
                                                                                                                                                                  Nett: 2.9lbs Gross: 4.2lbs
                                being accidentally knocked.                               Input impedance: >20kΩ bridging (balanced)
                                                                                                            >10kΩ (unbalanced)                   Accessories
                                The inputs and outputs are electronically                 Output impedance: <50Ω                                 RB-RK3:         1U Rear panel rack kit for large Redboxes




                                RB-DA6RG                                        6 Way Stereo Distribution Amplifier With RJ45 Connectors & Output Gain Control




                                The RB-DA6RG is a 1U rack-mount high                    to the RB-DA6R with the addition of
                                                                                                                                                 Audio Specification For RB-DA6RG
                                performance 6 way stereo distribution                   individual output gain adjustment, instead
                                                                                                                                                 As per RB-DA6R with the following difference:
                                amplifier for splitting a source into a                 of global stereo gain adjustment.                        Gain Range:     Adjustable 8dB loss to 18dB gain
                                number of different outputs. It is identical                                                                                     (12 adjustable pots)

                                * StudioHub+TM is a registered trademark of Radio Systems Inc




         2                                                Tel: +44 (0)1933 650 700 Fax: +44 (0)1933 650 726 Email: sales@sonifex.co.uk Internet: www.sonifex.co.uk
AUDIO & VIDEO INTERFACES



Redbox - Audio Distribution Amplifiers

RB-DDA22                                         Digital Audio Distribution Amplifier With Multiple Outputs



                                                                                                                                                         192




                                                                                                                                                                     AUDIO DISTRIBUTION AMPLIFIERS
“
                                                        The RB-DDA22 is a multiple input and              Note: The BNC outputs can be converted
       When an input is selected,                       multiple output digital audio distribution        to S/PDIF outputs using a simple locking
it is copied to all of the available                    amplifier designed to accept one of 5             connector, available separately, giving an
outputs. There are 5 sets of digital                    different digital inputs, amplify it and output   additional 6 x S/PDIF outputs, if required.
             “
audio outputs, providing 22 outputs                     this to 22 digital audio outputs in 5 different
                                                        audio formats.                                     Technical Specification For RB-DDA22
in total.                                                                                                  Audio Specification
                                                                                                           Input & Output 110Ω ±20% AES/EBU balanced I/O
                                                        It accepts signals with sample rates in the        Impedances:     75Ω ±5% S/PDIF unbalanced I/O
                                                        range 32kHz to 192kHz and distributes them                         75Ω ±5% TOSlink unbalanced I/O
                                                                                                           Signal Level:   Balanced: 3V/10V peak to peak
                                                        without sample rate conversion.                                    min/max
                                                                                                                           Unbalanced: Min 0.5V±20% peak
                                                        There are 5 inputs, one each of balanced                           to peak
                                                                                                           Sample          32, 44.1, 48, 88.2, 96,176.4 or 192kHz
                                                        AES/EBU on an XLR socket, unbalanced               Frequencies:
                                                        AES/EBU on BNC, balanced AES/EBU on an             Bit Depth:      Up to and including 24 bit
                                                        RJ45 socket, unbalanced S/PDIF on a phono          Front Panel Operational Controls & Indicators
                                                        socket and a TOSlink optical connection.           Digital        AES/EBU (XLR), AES/EBU (BNC), AES/EBU
                                                                                                           Input Select:  (RJ45), S/PDIF or TOSlink optical
                                                        An illuminated front panel input select push       Indicators:    Input presence indicators via tricolour
                                                                                                                          LEDS around the input select button
                                                        button is used to choose one of the 5 inputs,
                                                                                                           Connections
                                                        or to select the Auto Mode. In Auto Mode           Digital Inputs:  1 x AES/EBU XLR 3 pin socket
                                                        the unit interrogates each of the inputs in                         1 x AES/EBU BNC
                                                                                                                            1 x AES/EBU RJ45 socket (StudioHub+TM)
                                                        turn until it finds a lock. The select button                       1 x S/PDIF RCA phono socket
                                                                                                                            1 x TOSLink optical input
                                                        flashes to indicate loss of lock and the tri-
                                                                                                           Digital Outputs: 6 x AES/EBU XLR 3 pin plug
                                                        colour input LEDs around the push button                            6 x AES/EBU BNC
                                                                                                                            6 x AES/EBU RJ45 socket (StudioHub+TM)
                                                        indicate signal presence.                                           2 x S/PDIF RCA phono socket
                                                                                                                            2 x TOSLink optical output
                                                        When an input is selected, it is copied to         Mains Input:     Universal filtered IEC, continuously
                                                                                                                            rated 85-264VAC@47- 63Hz, max 10W
                                                        all of the available outputs. There are 5
                                                                                                           Fuse Rating:     Anti-surge fuse 1A 20 x 5mm
                                                        sets of digital audio outputs consisting of:
                                                                                                           Equipment Type
                                                        6 x balanced AES/EBU on XLR plugs, 6 x             RB-DDA22:     Digital audio distribution amplifier with
                                                        professional unbalanced AES/EBU on BNCs,                         multiple outputs
                                                        6 x balanced AES/EBU on RJ45 sockets, 2 x          Physical Specification
                                                        unbalanced S/PDIF on phono sockets and 2           Dimensions       48cm (W) x 10.8cm (D) x 4.2cm (H) (1U)
                                                                                                           (Raw):           19” (W) x 4.3” (D) x 1.7” (H) (1U)
                                                        x TOSlink optical outputs, giving 22 outputs       Dimensions       53cm (W) x 20.5cm (D) x 6cm (H)
                                                                                                           (Boxed):         21” (W) x 8” (D) x 2.4” (H)
                                                        in total, 12 balanced and 10 unbalanced.
                                                                                                           Weight:          Nett: 1.4kg Gross: 2.0kg
                                                                                                                            Nett: 3.0lbs Gross: 4.4lbs
                                                        The RJ45 input and output connections use
                                                                                                           Accessories
                                                        the StudioHub+TM * wiring standard for the
                                                                                                           RB-RK3:           1U Rear panel rack kit for large
                                                        balanced AES/EBU connections.                                        Redboxes


* StudioHub+TM is a registered trademark of Radio Systems Inc




 Tel: +44 (0)1933 650 700 Fax: +44 (0)1933 650 726 Email: sales@sonifex.co.uk Internet: www.sonifex.co.uk                                                                 3
AUDIO & VIDEO INTERFACES



                                            Redbox - Synchronisers, Delays & Silence Detectors

                                            RB-DSD8                                 8 Channel Silence Switcher
SYNCHRONISERS, DELAYS & SILENCE DETECTORS




                                            The RB-DSD8 8 channel silence switcher              status of the digital audio on that channel      durations, levels and switching functions so
                                            works in a similar way to the Sonifex               and a Selection LED to show that input is        that you can set up the unit for your specific
                                            RB-SD1 and RB-DSD1 but allows for 4                 currently being sent to each respective          application. A DIPSwitch configures the unit
                                            stereo channels of audio. These stereo              output. Two Presence LEDS for the left and       to be controlled serially which is indicated
                                            audio channels can be either analogue or            right inputs of each stereo pair indicate the    by a front panel LED. You can control the
                                            digital and can be used independently to            input level of the channels.                     unit remotely using either USB or Ethernet.
                                            give 4 stereo silence detectors or they can
                                                                                                The unit can switch between sources              The RB-DSD8 has been designed with dual
                                            be linked to handle multichannel audio
                                                                                                manually or automatically at the push of         redundant power supplies. This means
                                            inputs, e.g. for 5.1 and 7.1 surround systems.
                                                                                                a button. If switching manually, silence         that if either power supply fails, the other
                                            Designed to switch from one input (or set
                                                                                                detection is disabled and the user chooses       is ready to take over. In the extremely
                                            of inputs) to another in the event of loss of
                                                                                                when to switch using the main or backup          unlikely event that both fail, the unit has
                                            audio, the unit is ideal at transmitter sites, or
                                                                                                buttons. If switching automatically, the         been designed with a passive signal path
                                            after the master output of a studio, to switch
                                                                                                unit switches between the two sources            through the main input. This is essential
                                            in another audio source, or simultaneous
                                                                                                automatically upon the detection of              for applications such as installation at
                                            broadcast, should a master source fail.
                                                                                                silence. Each pair can be set to switch          transmitter sites, where a power failure to
                                            The unit can switch:                                manually or automatically and the current        the unit should not prevent the audio input
                                            • On loss of level of the main input.               setting is indicated by the Mode LED. Link/      signal from being output to the transmitter.
                                            • On loss of level on one channel of the            Select buttons are used to group channels
                                              main input.                                                                                        Contact Sonifex for further information if
                                                                                                together to access multichannel operation
                                            • On loss of synchronisation lock of a main                                                          you have a particular requirement that isn’t
                                                                                                and switch simultaneously. Each pair has a
                                              digital input.                                                                                     catered for by the RB-DSD8 as standard.
                                                                                                Link/Select button which illuminates blue
                                            The 2 x 8 channel audio inputs can accept           when active. Pressing and holding the first      Clocking & Synchronisation
                                            both digital and analogue connections,              Link/Select button with any other Link/          All digital input signals are routed to a
                                            with the unit automatically recognising a           Select button causes all inputs up to that       sample rate converter allowing mixed
                                            digital input. For the 8 channel outputs, by        point to be selected.                            incoming sample rates to be used. The
                                            setting the appropriate DIPSwitches, each                                                            output sample rates are selectable from a
                                                                                                The RB-DSD8 has a ‘slave mode’ that allows
                                            stereo output can be designated as either                                                            predefined master clock of 32kHz, 44.1kHz,
                                                                                                you to connect two RB-DSD8 units and
                                            an analogue pair or as a digital output, thus                                                        48kHz, 88.2kHz, 96kHz, 176.4kHz or 192kHz
                                                                                                control them simultaneously from one unit.
                                            making the RB-DSD8 incredibly flexible and                                                           or the clock can be derived from a sync
                                            suitable for many different applications.           The silence detect level is adjustable           input. When analogue inputs are selected,
                                            The unit level settings are in dBFS but when        between -39dBFS and -84dBFS in 3dBFS             the analogue to digital converters are also
                                            using analogue signals the equivalent full          steps via DIPSwitches and this level is          clocked at that sample rate.
                                            scale value can be set to +24dBu, +18dBu, or        compared to peak signals. The silence
                                                                                                                                                 DIPSwitches choose the synchronisation
                                            +12dBu by DIPSwitches.                              interval can be adjusted between 2 seconds
                                                                                                                                                 mode and the sync source from TTL
                                                                                                and 254 seconds in 2 second steps via
                                            Each stereo pair has individual settings and                                                         wordclock or AES/EBU through the dual-
                                                                                                DIPSwitches.
                                            controls and when stereo signals are linked,                                                         purpose synchronising input as standard.
                                            the foremost pair determines the switching          A powerful feature of the RB-DSD8 is that        A front panel indicator shows the status of
                                            characteristics and controls to be used. Each       by using the Sonifex SCi serial software, the    the synchronization input. Selectable sync
                                            stereo pair has an AES LED that shows the           unit can be programmed for different delay       modes are as follows:




             4                                                      Tel: +44 (0)1933 650 700 Fax: +44 (0)1933 650 726 Email: sales@sonifex.co.uk Internet: www.sonifex.co.uk
AUDIO & VIDEO INTERFACES



Redbox - Synchronisers, Delays & Silence Detectors
Master Mode                                               Audio Specification - Analogue                                Remote Control        Enabled or disabled, via rear panel
                                                          Maximum Input       +24dBu                                    Enable:               DIPswitch
In this mode the digital output sample rate               Level:                                                        Sync Mode &           Sync in master mode or sync from
is simply set by, and locked to, the internal             Input Impedance: >20kΩ bridging balanced                      Source Select:        MAIN input1, AES or wordclock
                                                                                                                                              sync input in auto or slave mode, via
on-board clock generator. No sync signal is               Dynamic Range:      >110dB                                                          rear panel DIPswitches
                                                          Distortion & Noise: >82dB THD + N at 1kHz
used or required.                                                                                                       Remote Start:         Latched or momentary, via
                                                          Common Mode         >60dB , ref 0dBu                                                DIPswitch
                                                          Rejection:                                                    Input Lock Loss:      Switch immediately or treat as
Auto Lock Mode




                                                                                                                                                                                      SYNCHRONISERS, DELAYS & SILENCE DETECTORS
                                                                                                                                              silence delay, via rear panel
                                                          Front Panel Operational Controls
In this mode no output is generated until                                                                                                     DIPswitch
                                                          Switch Mode Select: Via AUTO, MANUAL or SLAVE
                                                                                                                        Digital or            Digital or analogue, via rear panel
lock is achieved with a sync signal. The                                      push-buttons
                                                                                                                        Analogue Output:      DIPswitches
                                                          Manual Source       Via MAIN and BACKUP
digital output sample rate now follows the                Select:             push-buttons
                                                                                                                        Full Scale Line Up:   24, 18 or 12 dBu = 0dBFS, via rear
                                                                                                                                              panel DIPswitches
sync input. If the sync signal is removed                 Group Selection : Via LINK/SELECT push-buttons
                                                                                                                        Boot Mode:            Boot in boot or normal via rear
then the output sample rate is set by, and                Front Panel Indicators                                                              panel DIPswitch
                                                          Presence LEDs:      For all input channels                    Connections
locked to, the internal on-board clock
                                                          Link LEDs:          Show which channels are                   Digital/Analogue      2 x 8 channel inputs on
generator at the closest frequency available                                  controlled concurrently                   Inputs:               2 x 25 pin D-type male
to the previous sync input.                               Mode LEDs:          Indicate the current mode selected        Digital/Analogue      1 x 8 channel outputs on
                                                                              for each group                            Outputs:              1 x 25 pin D-type female
                                                          Selection LEDs:     Indicate whether MAIN or BACKUP           Sync Inputs:          1 x BNC (Wordclock or AES)
Slave Mode                                                                    is selected                               Remote I/O Port:      25 way D-type female
Here the digital output sample rate follows               AES LEDs:           Show the state of the digital input to    SCi port:             USB or ethernet
                                                                              each group
the sync input. When the sync signal is not                                                                             Mains Input:          2 x Universal filtered IEC,
                                                          PSU LEDs:           Show the state of each power                                    continuously rated 85-264VAC
present the digital output is turned off.                                     supply                                                          @47- 63Hz, max 60W
                                                          Remote Control LED: Show if remote control is selected        Fuse Rating:          2 X Anti-surge fuse 2A 20 x 5mm
                                                          External Sync LED: Show the state of any sync inputs
                                                                              used.                                     Equipment Type
  Audio Specification For RB-DSD8                                                                                       RB-DSD8:              8 channel silence switcher
                                                          Rear Panel - Operational Controls
  Audio Specification - Digital                           Silence Threshold: -39dBfs to -84dBfs in 3dBfs                Physical Specifications
  Dynamic Range:      >138dB                                                 steps, via rear panel DIPSwitches          Dimensions           48cm(W) x 22cm(D) x 4.2cm(H) 1U
  Distortion & Noise: <-137dB THD + N at 1kHz,            Silence Duration: 0 - 254 seconds in 2 second                 (Raw):               19” (W) x 8.7” (D) x 1.7” (H) 1U
                      ref 0dBFS                                              intervals duration, via rear panel         Weight:              Nett: 2.3kg     Gross: 2.9kg
                                                                             DIPSwitches                                                     Nett: 5.1lb     Gross: 6.4lb
  Input & Output      110Ω ± 20% AES/EBU balanced
  Impedances:         I/O 50Ω BNC TTL word clock input    Stereo/Mono        Stereo or mono, via rear panel             * Note that this product is deeper than standard
                                                          Switching:         DIPSwitch                                  Redboxes
  Signal Level:       Balanced: 3V/10V peak to peak
                      min/max                             Master Select:     32, 44.1, 48, 88.2, 96,176.4 or 192kHz
                                                                             Output sample rate, via rear panel         Accessories
  Sample Rates:       32, 44.1, 48, 88.2, 96,176.4 or                        DIPSwitches                                RB-RK3:            1U Rear panel rack kit for large
                      192kHz                                                                                                               Redboxes
                                                          Ignore Silence:    Each channel can be set to ignore
  Bit Depth:          Up to and including 24 bit                             silences, via rear panel DIPswitches



RB-DEED8                                            Dolby® E Encoder 8 Channel, Digital Inputs




Dolby® and the double-D symbol are registered trademarks of Dolby Laboratories

The RB-DEED8 is a Dolby® E Encoder. It                   either BNC or D-type connectors. These I/O                    between NTSC, PAL or Tri-level sync.
encodes up to 8 digital audio channels into              connections are paralleled, allowing one
                                                                                                                       8 general purposes inputs and 8 outputs
a single Dolby bitstream output. There is                type to be used per input or output.
                                                                                                                       are available on a rear panel 25 way D-type
also an extra Dolby output for connection to
                                                         Metadata can be input to the encoder using                    socket whose function can be programmed
monitoring equipment.
                                                         RS-485 via the external 9-pin D-type socket                   using the menu, e.g. alarm outputs for loss
Each digital input channel has independent               on the rear panel and can also be viewed                      of input or encoder errors.
level control, which can be adjusted from                using the SCi software.
                                                                                                                       The unit is controlled locally using the front
-24dB through to +24dB in 0.5dB steps. The
                                                         A video input is used to genlock the audio                    panel display and control knob but can
digital inputs and outputs can be selected to
                                                         output and Dolby® E encoding to a known                       be remote controlled via an RS-232 serial
be either balanced or unbalanced AES/EBU
                                                         video reference. This input autodetects                       connection using the Sonifex SCi software.
specification, and can be connected through



 Tel: +44 (0)1933 650 700 Fax: +44 (0)1933 650 726 Email: sales@sonifex.co.uk Internet: www.sonifex.co.uk                                                                                     5
AUDIO & VIDEO INTERFACES



                             Redbox - Dolby® Encoders & Decoders

                             RB-DEED8                                            Dolby® E Encoder 8 Channel, Digital Inputs (continued...)

                               Audio Specification For RB-DEED8                          Video Reference                                             Physical Specifications
                               Output Sample       48kHz                                 Reference Type:     Autodetect NTSC, PAL or Tri-level       Dimensions          48cm (W) x 10.8cm (D*)x 4.2cm (H)
                               Rate:                                                                         sync                                    (Raw):              19” (W) x 4.3” (D*) x 1.7” (H) (1U)
                               Input Sample Rates: CH1/2 & CH3/4: 32-192kHz              Impedance:          75Ω                                     Dimensions          59cm (W) x 27.5cm (D) x 11cm (H)
                                                   CH5/6 & CH7/8: 32-48kHz               Connector:          1 x BNC                                 (Boxed):            23.2” (W) x 10.8” (D) x 4.3” (H)
DOLBY® ENCODERS & DECODERS




                               Input & Output      75Ω/110Ω selectable                   LTC Input:          1 x BNC (not used)                      Weight:             Nett: 1.8kg        Gross: 2.3kg
                               Impedance:                                                                                                                                Nett: 4.0lb        Gross: 5.1lb
                                                                                         Operational Control
                               Signal Level        Unbalanced: 1Vp-p +/- 20%                                                                         * Note that this product is deeper than standard
                               (un-terminated):    Balanced: 6.6Vp-p +/- 20%             Display:           Vacuum fluorescent display
                                                                                                                                                     Redboxes
                               Digital Audio I/O:                                        System Navigation: Rotary selector with integral push-
                               Inputs:             8 input channels via 4 x BNCs or                         switch                                   Equipment Type
                                                   25 way D-type socket (AES3)           Additional Connections                                      RB-DEED8            Dolby® E encoder 8 channel, digital
                               Dolby Output 1:     1 x Dolby bitstream output via BNC    Remote             25-way ‘D’-type socket                                       inputs
                               Dolby Output 2:     1 x Dolby bitstream output via BNC    Input/Output Port:                                          Accessories
                                                   or 25 way D-type socket (AES3)        Serial Port:       RS232, 9 way D-type                      RB-RK3:             1U Rear panel rack kit for large
                               Digital Audio       6 x BNC                               Power Supply:      Universal filtered IEC, continuously                         Redboxes
                               Connectors:         1 x 25-way D-type socket                                 rated 85-264VAC @47-63Hz, fused
                               Metadata:           SMPTE-RDD06, 9 way D-type socket      Fuse Rating:       Anti-surge fuse 1A 20 x 5mm




                             RB-DEDD8                                            Dolby® E & Dolby Digital Decoder 8 Channel, Digital Outputs




                             The RB-DEDD8 is a Dolby® E & Dolby Digital                 8 general purposes inputs and 8 outputs                      Video Reference
                             Decoder. It decodes an incoming Dolby                      are available on a rear panel 25 way D-type                  Reference Type:     Autodetect NTSC, PAL or Tri-level
                                                                                                                                                                         sync
                             bitstream and transmits the decoded                        socket whose function can be programmed                      Impedance:          75Ω
                             outputs on BNC or D-type connectors on the                 using the menu, e.g. alarm outputs for loss                  Connector:          1 x BNC
                             rear panel. The Dolby input is also looped                 of input or decoder errors.                                  LTC Output:         1 x BNC (not used)
                             through to allow connection to other Dolby                                                                              Operational Control
                                                                                        The unit is controlled locally through the
                             receiver equipment.                                                                                                     Display:           Vacuum fluorescent display
                                                                                        front panel display but can be remote                        System Navigation: Rotary selector with integral push-
                             Each digital output channel has independent                controlled via an RS-232 serial connection                                      switch
                             level control, which can be adjusted from                  using the Sonifex SCi software.                              Additional Connections
                                                                                                                                                     Remote             25-way ‘D’-type socket
                             -24dB through to +24dB in 0.5dB steps. The                                                                              Input/Output Port:
                             digital inputs and outputs can be selected to                                                                           Serial Port:       RS232, 9 way D-type socket
                                                                                         Audio Specification For RB-DEDD8
                             be either balanced or unbalanced AES/EBU                                                                                Power Supply:      Universal filtered IEC, continuously
                                                                                         Output Sample       48kHz                                                      rated 85-264VAC @47-63Hz, fused
                             specification, and can be connected through                 Rate:
                                                                                                                                                     Fuse Rating:       Anti-surge fuse 1A 20 x 5mm
                             either BNC or D-type connectors. These I/O                  Input Sample Rates: 32-48kHz
                                                                                                                                                     Physical Specifications
                             connections are paralleled, allowing one type               Input & Output      75Ω/110Ω selectable
                                                                                                                                                     Dimensions           48cm (W) x 10.8cm (D*)x 4.2cm (H)
                                                                                         Impedance:
                             to be used per input or output.                             Signal Level        Unbalanced: 1Vp-p ±20%
                                                                                                                                                     (Raw):               19” (W) x 4.3” (D*) x 1.7” (H) (1U)
                                                                                         (Un-terminated):    Balanced: 6.6Vp-p ±20%                  Dimensions           59cm (W) x 27.5cm (D) x 11cm (H)
                             The metadata output from the decoder is                     Digital Audio I/O:
                                                                                                                                                     (Boxed):             23.2” (W) x 10.8” (D) x 4.3” (H)
                             transmitted using RS-485 via the external                   Dolby Input:        1 x Dolby bitstream input via BNC       Weight:              Nett: 1.8kg        Gross: 2.3kg
                                                                                                                                                                          Nett: 4.0lb        Gross: 5.1lb
                             9-pin D-type socket on the rear panel and can               Outputs:            8 x Digital audio output channels &
                                                                                                             2 x Auxiliary audio output (stereo      * Note that this product is deeper than standard
                             also be viewed using the SCi software.                                          downmix) channels via 5 x BNCs or       Redboxes
                                                                                                             25 way D-type socket
                                                                                                                                                     Equipment Type
                             A video input is used to genlock the audio                  Dolby Output:       1 x Dolby bitstream output via BNC
                                                                                                                                                     RB-DEDD8            Dolby® E & Dolby Digital decoder 8
                                                                                                             or D-type
                             outputs and Dolby® E decoding to a known                                                                                                    channel, digital outputs
                                                                                         Digital Audio       7 x BNC
                             video reference. This input autodetects                     Connectors:         1 x 25 way D-type socket                Accessories
                             between NTSC, PAL or Tri-level sync.                        Metadata:           SMPTE-RDD06, 9 way D-type socket        RB-RK3:             1U Rear panel rack kit for large
                                                                                                                                                                         Redboxes
                             Dolby® and the double-D symbol are registered trademarks of Dolby Laboratories



        6                                                Tel: +44 (0)1933 650 700 Fax: +44 (0)1933 650 726 Email: sales@sonifex.co.uk Internet: www.sonifex.co.uk
AUDIO & VIDEO INTERFACES



Redbox - Video Embedders & De-embedders

RB-VHEDD8                                           3G/HD/SD-SDI Dolby® E Encoder & Embedder

The RB-VHEDD8 is a Dolby® E Encoder
and Embedder. It
encodes 8 channels




                                                                                                                                                                              VIDEO EMBEDDERS & DE-EMBEDDERS
of audio into two
channels of an
AES/EBU digital
audio stream which is
then embedded onto
any of the available
groups within each of the
two video output paths. It is also
transmitted on a BNC or D-type on the
rear panel.

The audio inputs to the encoder can be              Audio Specification For RB-VHEDD8                           Signal Level          Unbalanced: 1Vp-p ±20%
                                                                                                                (Un-terminated):      Balanced: 6.6Vp-p ±20%
selected to either come from the external           SDI Specification
                                                    SDI Input:          1 x BNC, 3G/HD/SD-SDI                   Digital Audio I/O:
audio inputs via the BNC or D-type                                                                              Inputs:               8 x digital audio input channels via
                                                    SDI Outputs:        2 x BNC, 3G/HD/SD-SDI, re-clocked                             4 x BNCs or 25 way D-type socket
connections on the rear panel or from the           Impedance:          75Ω                                                           (AES3)
audio in the incoming SDI input. Similarly,         Output Alignment    <0.2UI (3G <0.3UI)                      Outputs:              2 output channels via 1 x BNC
                                                    Jitter:                                                                           or 25 way D-type socket (AES3)
the metadata input for the encoder can be                                                                       Digital Audio         5 x BNC
                                                    Output Level:   800mV ±10%
selected to either come via the external            Return Loss:    <15dB at 1500MHz                            Connectors:           1 x 25-way D-type socket
9-pin D-type on the rear panel or from              SDI Supported   270Mbps, SMPTE-259M-C (SD)                  LTC Input:            1 x BNC (not used)
                                                    Standards:      1.485 or 1.4835Gbps, SMPTE-292M             Operational Control
metadata embedded into the vertical                                 (HD)                                        Display:           Vacuum fluorescent display
blanking area of the video input.                                   2.97 or 2.967Gbps, SMPTE-424M
                                                                    (3G), SMPTE-425M-A                          System Navigation: Rotary selector with integral push-
                                                                                                                                   switch
                                                    Supported Video 525/59.94 (SMPTE-125M)
The unit is controlled locally through the          Formats:        625/50 (ITU-R BT.656)                       Additional Conections
front panel display but can be remote                               720p/23.98, 24, 25, 29.97, 30, 50,          Ethernet Port:     10/100Mbps, RJ-45
                                                                    59.94, 60 (SMPTE-296M)                      Remote             25-way ‘D’-type socket
controlled via an ethernet connection using                         1035i/59.94, 60 (SMPTE-260M)                Input/Output Port:
                                                                    1080i/50, 59.94, 60 (SMPTE-274M)
the Sonifex SCi software. The embedding                             1080p/23.98, 24, 25, 50, 59.94, 60          Power Supply:      Universal filtered IEC, continuously
                                                                    (SMPTE-274M)                                                   rated 85-264VAC @47-63Hz, fused
channel routing is controlled using these                           1080pSF/23.98, 24, 25, 29.97, 30            Fuse Rating:       Anti-surge fuse 1A 20 x 5mm
methods also.                                                       (RP-211)
                                                                                                                Physical Specifications
                                                                    1080i/50 (SMPTE-295M)
                                                                    1080p/50 (SMPTE-295M)                       Dimensions           48cm (W) x 10.8cm (D*)x 4.2cm (H)
It has a triple rate SDI receiver with                                                                          (Raw):               19” (W) x 4.3” (D*) x 1.7” (H) (1U)
                                                    Embedded Audio: 24-bit, 48kHz synchronous
automatic input rate detection and                                  SMPTE-272M-C                                Dimensions           59cm (W) x 27.5cm (D) x 11cm (H)
                                                                    SMPTE-299M                                  (Boxed):             23.2” (W) x 10.8” (D) x 4.3” (H)
equalisation along with two re-clocked and          Metadata:       SMPTE-2020M
                                                                                                                Weight:              Nett: 1.8kg        Gross: 2.3kg
                                                                                                                                     Nett: 4.0lb        Gross: 5.1lb
individually buffered SDI outputs. It supports                      SMPTE-RDD06, 9-Pin D-type socket
                                                                                                                * Note that this product is deeper than standard
the full range of 3G, HD and SD standards           Audio Specifications                                        Redboxes
from NTSC and PAL up to 1080p 60Hz.                 Output Sample       48kHz                                   Equipment Type
                                                    Rate:                                                       RB-VHEDD8             3G/HD/SD-SDI Dolby® E encoder &
                                                    Input Sample Rates: CH1/2 & CH3/4: 32-192kHz                                      embedder
Each digital input channel has independent                              CH5/6 & CH7/8: 32-48kHz                 Accessories
level control, which can be adjusted from           Input & Output      75Ω/110Ω selectable                     RB-RK3:               1U Rear panel rack kit for large
                                                    Impedance:
-24dB through to +24dB in 0.5dB steps. The                                                                                            Redboxes

digital inputs and outputs can be selected to
be either balanced or unbalanced AES/EBU          Metadata                             Metadata             Audio           Audio              SDI                 SDI
                                                      Input                              VANC               Pass /         Embedder         Transmitter            Output 1
specification, and can be connected through                                           De-embedder           Delete
                                                                                                                                                          CD
either BNC or D-type connectors. These I/O
connections are paralleled, allowing one
                                                        SDI                                                 Audio                                                  SDI
type to be used per input or output.                  Input
                                                                       SDI
                                                                     Receiver
                                                                                         Audio
                                                                                      De-embedder
                                                                                                            Pass /          Audio
                                                                                                                           Embedder
                                                                                                                                               SDI
                                                                                                                                            Transmitter            Output 2
                                                                                                            Delete
                                                               EQ                                                                                         CD
8 general purposes inputs and 8 outputs
are available on a rear panel 25 way D-type                                            8
socket whose function can be programmed
                                                     Digital        AES RX/TX                               Dolby E
using the menu, e.g. alarm outputs for loss of       Audio             and
                                                                                            Channel
                                                                                            Routing         Encoder
input or encoder errors.                                I/O         Termination             & Level
                                                                      Select                 Control
                                                                                                                           2
                                                                                  8

                        RB-VHEDD8 Block Diagram




 Tel: +44 (0)1933 650 700 Fax: +44 (0)1933 650 726 Email: sales@sonifex.co.uk Internet: www.sonifex.co.uk                                                                          7
AUDIO & VIDEO INTERFACES



                                 Redbox - Video Embedders & De-embedders

                                 RB-VHDDD8                                            3G/HD/SD-SDI Dolby® E & Dolby Digital Decoder & De-Embedder

                                 The RB-VHDDD8 is a Dolby® E & Dolby
                                 Digital Decoder and De-Embedder. It
                                 de-embeds up to 10 channels of audio
VIDEO EMBEDDERS & DE-EMBEDDERS




                                 within any audio group of an SDI video
                                 signal and a further 2 which are sent to
                                 the Dolby® Decoder. The outputs from the
                                 Decoder or the De-embedder can then be
                                 re-embedded onto either of the two SDI
                                 outputs and also transmitted on a BNC or
                                 D-type situated on the rear panel.

                                 The metadata output from the decoder is
                                 transmitted using RS-485 via the external             Audio Specification For RB-VHDDD8                          Output Impedance:   75Ω/110Ω selectable
                                                                                       SDI Specification                                          Signal Level        Unbalanced: 1Vp-p +/- 20%
                                 9-pin D-type on the rear panel and can also                                                                      (Un-terminated):    Balanced: 6.4Vp-p +/- 20%
                                                                                       SDI Input:          1 x BNC, 3G/HD/SD-SDI
                                 be embedded into the vertical blanking                SDI Outputs:        2 x BNC, 3G/HD/SD-SDI, re-clocked
                                                                                                                                                  Digital Audio       12 output channels via 6 x BNC or
                                                                                                                                                  Outputs:            25 way D-type socket (AES3)
                                 space onto either of the two SDI outputs.             Impedance:          75Ω                                    Digital Audio       6 x BNC
                                                                                       Output Alignment    <0.2UI (3G <0.3UI)                     Connectors:         1x 25-way D-type socket
                                 The unit is controlled locally through the            Jitter:
                                                                                       Output Level:   800mV ±10%                                 Operational Control
                                 front panel display but can be remote                                                                            Display:           Vacuum fluorescent display
                                                                                       Return Loss:    <15dB at 1500MHz
                                 controlled via an ethernet connection using           SDI Supported   270Mbps, SMPTE-259M-C (SD)                 System Navigation: Rotary selector with integral push-
                                                                                                                                                                     switch
                                 the Sonifex SCi software, through which               Standards:      1.485 or 1.4835Gbps, SMPTE-292M
                                                                                                       (HD)                                       Additional Conections
                                 metadata can also be viewed. It has a triple                          2.97 or 2.967Gbps, SMPTE-424M              Ethernet Port:     10/100Mbps, RJ-45
                                                                                                       (3G), SMPTE-425M-A
                                 rate SDI receiver with automatic input rate                                                                      Remote             25-way ‘D’-type socket
                                                                                       Supported Video 525/59.94 (SMPTE-125M)                     Input/Output Port:
                                 detection and equalisation along with two             Formats:        625/50 (ITU-R BT.656)
                                                                                                       720p/23.98, 24, 25, 29.97, 30, 50,         Power Supply:      Universal filtered IEC, continuously
                                 re-clocked and individually buffered SDI                              59.94, 60 (SMPTE-296M)                                        rated 85-264VAC @47-63Hz, fused
                                 outputs. It supports the full range of 3G, HD                         1035i/59.94, 60 (SMPTE-260M)               Fuse Rating:       Anti-surge fuse 1A 20 x 5mm
                                                                                                       1080i/50, 59.94, 60 (SMPTE-274M)           Physical Specifications
                                 and SD standards from NTSC and PAL up to                              1080p/23.98, 24, 25, 50, 59.94, 60
                                                                                                       (SMPTE-274M)                               Dimensions           48cm (W) x 10.8cm (D*)x 4.2cm (H)
                                 1080p 60Hz.                                                           1080pSF/23.98, 24, 25, 29.97, 30           (Raw):               19” (W) x 4.3” (D*) x 1.7” (H) (1U)
                                                                                                       (RP-211)                                   Dimensions           59cm (W) x 27.5cm (D) x 11cm (H)
                                 Each digital output channel has                                       1080i/50 (SMPTE-295M)                      (Boxed):             23.2” (W) x 10.8” (D) x 4.3” (H)
                                                                                                       1080p/50 (SMPTE-295M)                      Weight:              Nett: 1.8kg        Gross: 2.3kg
                                 independent level control which can be                Embedded Audio: 24-bit, 48kHz synchronous                                       Nett: 4.0lb        Gross: 5.1lb
                                 adjusted from -24dB through to +24dB                                  SMPTE-272M-C                               * Note that this product is deeper than standard
                                                                                                       SMPTE-299M                                 Redboxes
                                 in 0.5dB steps. The digital outputs can               Metadata:       SMPTE-2020M
                                                                                                       SMPTE-RDD06, 9-Pin D-type                  Equipment Type
                                 be selected to be either balanced or
                                                                                       Audio Specifications                                       RB-VHDDD8           3G/HD/SD-SDI Dolby® E & Dolby
                                 unbalanced AES/EBU specification, and can                                                                                            Digital decoder & de-embedder
                                                                                       Output Sample      48kHz
                                 be connected through either BNC or D-type             Rate:                                                      Accessories
                                 connectors. These output connections are                                                                         RB-RK3:             1U Rear panel rack kit for large
                                                                                                                                                                      Redboxes
                                 paralleled, allowing one type to be used per
                                                                                    RB-VHDDD8 Block Diagram
                                 output.
                                 8 general purposes
                                                                                                                      Audio                          Metadata
                                 inputs and 8 outputs are                                                             Pass /
                                                                                                                                        Audio
                                                                                                                                                      VANC
                                                                                                                                                                         SDI                 SDI
                                                                                                                                                                                             Output 1
                                                                                                                                       Embedder                       Transmitter
                                 available on a rear panel                                                            Delete                          Embed
                                                                                                                                                                                    CD
                                 25 way D-type socket
                                 whose function can be
                                 programmed using the              SDI             SDI            Audio
                                                                                                                      Audio
                                                                                                                      Pass /
                                                                                                                                        Audio
                                                                                                                                                     Metadata
                                                                                                                                                       Vanc              SDI                 SDI
                                                                 Input           Receiver      De-embedder                             Embedder                       Transmitter            Output 2
                                 menu, e.g. alarm outputs                                                             Delete                          Embed
                                                                         EQ                                                                                                         CD
                                 for loss of input or
                                 decoder errors.                                                    2           10                     Channel
                                                                                                                                       Routing
                                                                                                                                       & Level
                                                                                                                   Dolby E &            Control                                              Digital
                                                                                                                  Dolby Digital
                                                                                                                                  10                                     AES
                                                                                                                                                                                             Audio
                                                                                                                                                                      Transmitter
                                                                                                                    Decoder                                               &                  Outputs
                                                                                                                                                                      Termination
                                                                                                                                                                        Select




                                                                                                                                                                                             Metadata
                                                                                                                                                                                             Output




          8                                            Tel: +44 (0)1933 650 700 Fax: +44 (0)1933 650 726 Email: sales@sonifex.co.uk Internet: www.sonifex.co.uk
TALKBACK & COMMUNICATIONS



Talkback & Communications

CM-TBU                            Line Powered Telephone Balance Unit


The CM-TBU line-powered                                                                       by the ‘ON’ LED, and can either be done
                                                                                              after an outgoing call has been dialled on
telephone balance unit                                                                        a telephone set connected to the unit, or




                                                                                                                                                         TALKBACK & COMMUNICATIONS
is compatible with all                                                                        to answer an incoming call after the ‘RING’
analogue direct exchange                                                                      LED is seen to flash. Note that a telephone
lines and provides a 4-wire                                                                   set is not required for incoming calls unless
                                                                                              an audible ring is required. If the sidetone
communications system to                                                                      level at the 4-wire output is found to be
interface with the telephone                                                                  excessive, the outgoing signal level can
network.                                                                                      be reduced usingthe ‘SEND LEVEL’ control
                                                                                              or the balance controls can be adjusted to
The high degree of separation between                                                         minimize it.
send and receive signals makes it suitable                                                    The unit is supplied with a connector and
for use in telephone IFB (interrupted                                                         cable kit that enables connections to be
foldback) applications and the high drive                                                     made to both UK Telecom or the universal
capacity at the 4-wire output enables         Front and rear view of the CM-TBU
                                                                                              RJ11 sockets used in most telephone
a presenter’s earpiece to be connected                                                        networks around the world.
                                              circuit by adjusting three elements (NULL,
directly to the unit without an external
                                              R-BAL and C-BAL) via potentiometers which
amplifier.
                                              simulate the complex line impedance. This
This extremely compact unit is powered        can be used to compensate for local line          Technical Specification For CM-TBU
from the telephone line and provides an       variations or to adapt to the telephone         4-Wire Input
interface to a 4-wire circuit with separate   systems of other countries, where line          Input Impedance:         10kΩ, transformer coupled
level control of send and receive signals.    characteristics may differ. Optimization of     Input Connector:         3 pin XLR female connector
                                              the sidetone rejection does not involve the     Input Level Range:       -12dBU to +4dBU before
Optimum rejection of the input signal on                                                                               limiting when connected to
                                              use of any test equipment and can be easily                              an average line
the 4-wire output is achieved in a bridge
                                              carried out while the system is in use.         4-Wire Output
                                                                                              Output Impedance:        150Ω, transformer coupled
  Features of the CM-TBU                      Although the signal level being sent to the     Output Connector:        3 pin XLR male connector
                                              line can be manually adjusted using the         Output Level Range:      -6dBU to +6dBU, for average
  • Isolated, full-duplex 4-wire interface
                                              ‘SEND LEVEL’ control over a wide range, the                              line level
    to direct non-digital telephone                                                           Sidetone Rejection:      30dB to 40dB average, depending
                                              level control is followed by a limiter that                              on line characteristics
    exchange lines.
                                              prevents the telephone line signal level        2-Wire
  • Line powered, requiring no battery or
                                              becoming overloaded or distorted. The           Off Hook Voltage:        6V minimum
    external power.
                                              limiter drives a ‘LIMIT’ LED to indicate the    2 Wire Connectors:       RJ11 socket - line
  • Simple optimization of sidetone                                                                                    RJ11 socket - handset
                                              onset of limiting.
    rejection with any country’s                                                              Front Panel Operational Controls

    telephone system.                                                                         Line Connect:            Push button with indicator
                                              Although the output stage can drive a
                                                                                              Send Level:              Small rotary control
  • LEDs indicating ‘Ring’, ‘Line Hold’ and   presenter’s earpiece in a telephone IFB
                                                                                              Receive Level:           Large rotary control
    ‘Limit’ conditions.                       application, the ‘RECEIVE LEVEL’ control may    Null Balance:            Recessed preset potentiometer
  • Input level control with line-sensing     not be accessible to the presenter, who is      R Balance:               Recessed preset potentiometer
    limiter and limit indicator.              normally situated some distance from the        C Balance:               Recessed preset potentiometer
  • High drive output with level control      unit. The presenter may then require a local    Ring LED:                Indicates incoming ringing
    for direct feed to presenter’s            control of the earpiece signal level. The CM-   Limit LED:               Indicates limiter active

    earpiece, etc.                            TBU can be used to supply the correct signal    On LED:                  Indicates connection to the
                                                                                                                       telephone line
  • Loop-through RJ11 line sockets            level to a suitable battery powered earpiece    Equipment Type
    provide universal connection to line      belt-pack unit.                                 CM-TBU                   Line powered telephone
    and telephone set.                                                                                                 balance unit
                                              To enable communication between the             Physical Specification
  • Connection to the telephone set is
                                              4-wire circuit and the telephone network,       Dimensions:              77mm (W) x 83mm (D) x
    maintained while the unit is in use.                                                                               42mm (H)
                                              once the 4-wire and telephone line cable
  • Small, rugged extruded aluminium                                                                                   3.0” (W) x 3.3” (D) x 1.7” (H)
                                              connections are made to the unit, the ‘LINE     Weight:                  Nett: 0.25kg Gross: 0.75kg
    case with XLR3 male & female 4-wire
                                              CONNECT’ switch can be pressed to power                                  Nett: 0.60lbs Gross: 1.7lbs
    connectors.
                                              the unit from the line. This is indicated




 Tel: +44 (0)1933 650 700 Fax: +44 (0)1933 650 726 Email: sales@sonifex.co.uk Internet: www.sonifex.co.uk                                                    9
TALKBACK & COMMUNICATIONS



                                                       Talkback & Communications

                                                       CM-TLL                              Line Powered Telephone Line Listen Unit


                                                       The CM-TLL provides a                           The line and telephone set are connected
                                                                                                       to the unit via the RJ11 connectors in order                   Features of the CM-TLL
                                                       low-loss interface to receive
                                                                                                       to make an outgoing call. A telephone may
TALKBACK & COMMUNICATIONS & STUDIO ILLUMINATED SIGNS




                                                       audio from a telephone line.                    not be required if calls are only incoming,
                                                                                                                                                                      • Audio interface to direct analogue
                                                                                                                                                                        exchange lines - receive calls with
                                                       The line-powered unit is                        because telephone line ringing is indicated                      electrical isolation from the line.
                                                       compatible with all analogue                    by a flashing LED built into the unit. In                      • Line powered, requiring no battery or
                                                                                                       either case, the ‘LINE CONNECT’ switch is
                                                       direct exchange lines and                       pressed to make the line connection. The
                                                                                                                                                                        external power.
                                                                                                                                                                      • LEDs indicating ‘Ring’ and ‘On Hold’
                                                       includes an LED indication                      ‘ON’ LED indicates that the unit is powered                      conditions.
                                                       of incoming calls. The unit is                  and that audio is routed to the line via the                   • Loop-through line sockets provide
                                                       intended to be used with an                     XLR plug.                                                        in-line connection with existing
                                                       earpiece amplifier to receive                                                                                    telephone.
                                                                                                                                                                      • Existing telephone remains
                                                       an audio feed by telephone                        Technical Specification For CM-TLL
                                                                                                       4-Wire Output                                                    connected when the unit is in use.
                                                       from a studio.                                  Output Impedance:    150Ω, transformer coupled                 • Line connections to British or
                                                                                                       Output Connector:    3 pin XLR male connector
                                                                                                                                                                        International sockets via supplied
                                                                                                       Output Level:        Typically 0dBU for average line level
                                                                                                                                                                        cable kit.
                                                                                                       2-Wire
                                                                                                       Off Hook Voltage:    6V minimum
                                                                                                                                                                      • Connection to the telephone set is
                                                                                                       2 Wire Connectors:   RJ11 socket - line                          maintained while the unit is in use.
                                                                                                                            RJ11 socket - handset                     • Small, rugged extruded aluminium
                                                                                                       Front Panel Operational Controls                                 case with XLR3 male 4-wire
                                                                                                       Line Connect:        Push button with indicator                  connector.
                                                                                                       Ring LED:            Indicates incoming ringing
                                                                                                       On LED:              Indicates connection to the
                                                                                                                            telephone line




                                                                                                                                                                    “
                                                                                                       Equipment Type
                                                                                                       CM-TLL               Line powered telephone line listen           An audio interface to connect to
                                                                                                                            unit
                                                                                                       Physical Specification                                       direct analogue exchange lines and
                                                                                                                                                                                    “
                                                                                                       Dimensions:          77mm (W) x 83mm (D) x 42mm (H)          receive calls with electrical isolation
                                                                                                                            3.0” (W) x 3.3” (D) x 1.7” (H)
                                                                                                       Weight:              Nett: 0.20kg         Gross: 0.70kg      from the line.
                                                       Front and rear view of the CM-TLL                                    Nett: 0.50lbs        Gross: 1.6lbs




                                                       Studio Illuminated Signs

                                                                                                      New Remote Programming Controller

                                                                                                                                                                                                 New
                                                                                                       New Remote Programming                                                                Programming
                                                                                                       Controller                                                                               Method
                                                       Changes to
                                                                                                       The signs are preconfigured to display
                                                                                                       certain colours when the control inputs are
                                                                                                       active. Information on the colours shown
                                                       SignalLED signs                                 can be found on the Sonifex website. Prior
                                                                                                       to 1st December 2010, the display mode
                                                                                                                                                                    Programming
                                                                                                                                                                    Controller must be
                                                       sold after 1st                                  and colour options could then be varied
                                                                                                       using an 8 way DIPswitch, accessible
                                                                                                                                                                    used. This allows a much
                                                                                                                                                                    simpler way of programming any sign

                                                       December 2010                                   during installation. From 1st December
                                                                                                       2010, this is different - the signs are still
                                                                                                                                                                    using a simple hand-held remote control.
                                                                                                                                                                    Please note that the control is sold
                                                                                                       preconfigured, but to vary the colours                       separately and one control can program
                                                                                                       and switching modes, the LD-RPC Remote                       multiple signs.




     10                                                                          Tel: +44 (0)1933 650 700 Fax: +44 (0)1933 650 726 Email: sales@sonifex.co.uk Internet: www.sonifex.co.uk
PHONE IN 6



Radio Talkshow System

Phone In 6                                 Radio Talkshow Telephone Switching System




                                                                                                                                                      PHONE IN 6
PI-6R Remote Control Front Panel




Talkshows have never been so easy                                                                                 Features List
                                                                                                  • Simple installation using CAT5 cabling for the
The Phone In 6 is a telephone switching system for radio                                            remote control panel.
talkshows. It consists of a desktop Remote Control Panel for call                                 • Automatic call answering.
control, and a rackmount Base Console which contains all of the                                   • Automatic call disconnection.
                                                                                                  • Self-op or call screening modes.
audio and telephony connections, including two superb quality                                     • Caller conferencing.
digital telephone hybrids. Connected via ethernet, the units                                      • Headset included with system.
make up a simple, easy to use talkshow system.                                                    • Simple switch button control of callers.
                                                                                                  • Receive, route, drop or make calls.
The Base Console can be loaded with 2, 4, or     The Phone In 6 uses an echo-cancellation         • 12 digit keypad to make calls, recall favourite
6 phone line modules, where each module          DSP algorithm and impedance matching               settings and for speed-dialling.
can have 2 PSTN (normal telephone) lines or      to give around 70dB cancellation, which          • Two line LCD display.
1 ISDN BRI line. The ISDN basic rate interface   provides excellent separation of caller & line   • Phonebook for automatic dialling.
allows 2 calls to be handled, 1 on each B        send audio and elimination of feedback,          • Responsive illuminated switch buttons.
channel. The PSTN module has 2 interfaces        distortion & echo on the incoming calls.         • Programmable GPIO.
each using a modern digital hybrid interface,    This is close to being the best performance      • Ethernet control/connectivity.
which is settable by software to handle          possible on a telephone line & uses              • Two superb quality digital telephone hybrids.
a variety of PSTN and PABX systems with          the same enhanced echo cancellation              • Modular PSTN & ISDN telephony inputs.
varying impedances, call connection &            algorithms as used on the DHY-03, the best       • Hardware metering of send & receive levels.
disconnection tones.                             performing telephone hybrid in the world.        • Send & receive level adjustment.
                                                                                                  • Wide range of impedance matching options.
                                                                                                  • Music on hold input.
                                                                                                  • AGC, automatic gain control of send & receive
                                                                                                    signals.
                                                                                                  • Echo cancellation.
PI-6C Base Console Front & Rear
                                                                                                  • Noise gate.
                                                                                                  • Automatic caller ducking.
                                                                                                  • Option for AES/EBU inputs & outputs.




 Tel: +44 (0)1933 650 700 Fax: +44 (0)1933 650 726 Email: sales@sonifex.co.uk Internet: www.sonifex.co.uk                                             11
Sonifex Product Update Sept10

More Related Content

What's hot

Xu200
Xu200Xu200
Kramer VS-411
Kramer VS-411Kramer VS-411
Kramer VS-411
AV ProfShop
 
Kramer VS-2-DVA
Kramer VS-2-DVAKramer VS-2-DVA
Kramer VS-2-DVA
AV ProfShop
 
Kramer VS-2DVA
Kramer VS-2DVAKramer VS-2DVA
Kramer VS-2DVA
AV ProfShop
 
Bdiscom flyer en_07
Bdiscom flyer en_07Bdiscom flyer en_07
Bdiscom flyer en_07
bdiscom
 
Am5 xt ext-200
Am5 xt ext-200Am5 xt ext-200
Am5 xt ext-200
vsimhas
 
Dukane ihear system
Dukane ihear systemDukane ihear system
Dukane ihear system
SchoolVision Inc.
 
Xu100
Xu100Xu100
Kramer VS-1201XL
Kramer VS-1201XLKramer VS-1201XL
Kramer VS-1201XL
AV ProfShop
 
Owi catalog crs101
Owi catalog   crs101Owi catalog   crs101
Owi catalog crs101
OWI-Inc
 
Data sheet en_us_1888281611
Data sheet en_us_1888281611Data sheet en_us_1888281611
Data sheet en_us_1888281611
amthanhbosch
 
Kramer VS-601-XLM
Kramer VS-601-XLMKramer VS-601-XLM
Kramer VS-601-XLM
AV ProfShop
 
EGNC105MK
EGNC105MKEGNC105MK
EGNC105MK
spicepark
 
Data sheet en_us_1881362443
Data sheet en_us_1881362443Data sheet en_us_1881362443
Data sheet en_us_1881362443
amthanhbosch
 
Rcx1500 brochure
Rcx1500 brochureRcx1500 brochure
Rcx1500 brochure
B&W Group France
 
Vm3240 va
Vm3240 vaVm3240 va

What's hot (16)

Xu200
Xu200Xu200
Xu200
 
Kramer VS-411
Kramer VS-411Kramer VS-411
Kramer VS-411
 
Kramer VS-2-DVA
Kramer VS-2-DVAKramer VS-2-DVA
Kramer VS-2-DVA
 
Kramer VS-2DVA
Kramer VS-2DVAKramer VS-2DVA
Kramer VS-2DVA
 
Bdiscom flyer en_07
Bdiscom flyer en_07Bdiscom flyer en_07
Bdiscom flyer en_07
 
Am5 xt ext-200
Am5 xt ext-200Am5 xt ext-200
Am5 xt ext-200
 
Dukane ihear system
Dukane ihear systemDukane ihear system
Dukane ihear system
 
Xu100
Xu100Xu100
Xu100
 
Kramer VS-1201XL
Kramer VS-1201XLKramer VS-1201XL
Kramer VS-1201XL
 
Owi catalog crs101
Owi catalog   crs101Owi catalog   crs101
Owi catalog crs101
 
Data sheet en_us_1888281611
Data sheet en_us_1888281611Data sheet en_us_1888281611
Data sheet en_us_1888281611
 
Kramer VS-601-XLM
Kramer VS-601-XLMKramer VS-601-XLM
Kramer VS-601-XLM
 
EGNC105MK
EGNC105MKEGNC105MK
EGNC105MK
 
Data sheet en_us_1881362443
Data sheet en_us_1881362443Data sheet en_us_1881362443
Data sheet en_us_1881362443
 
Rcx1500 brochure
Rcx1500 brochureRcx1500 brochure
Rcx1500 brochure
 
Vm3240 va
Vm3240 vaVm3240 va
Vm3240 va
 

Viewers also liked

Proyecto MIPYMES
Proyecto MIPYMESProyecto MIPYMES
Proyecto MIPYMES
fdidocar
 
Brayan
BrayanBrayan
Brayan
gender
 
Nicolas
NicolasNicolas
Nicolas
unnuevoc
 
House of Hope Rhode Island: Teen Statistics
House of Hope Rhode Island: Teen StatisticsHouse of Hope Rhode Island: Teen Statistics
House of Hope Rhode Island: Teen Statistics
New England Multimedia
 
Spelling lesson 3 p. 17
Spelling lesson 3 p. 17Spelling lesson 3 p. 17
Spelling lesson 3 p. 17parres
 
Plants
PlantsPlants

Viewers also liked (6)

Proyecto MIPYMES
Proyecto MIPYMESProyecto MIPYMES
Proyecto MIPYMES
 
Brayan
BrayanBrayan
Brayan
 
Nicolas
NicolasNicolas
Nicolas
 
House of Hope Rhode Island: Teen Statistics
House of Hope Rhode Island: Teen StatisticsHouse of Hope Rhode Island: Teen Statistics
House of Hope Rhode Island: Teen Statistics
 
Spelling lesson 3 p. 17
Spelling lesson 3 p. 17Spelling lesson 3 p. 17
Spelling lesson 3 p. 17
 
Plants
PlantsPlants
Plants
 

Similar to Sonifex Product Update Sept10

Kramer VM-9T
Kramer VM-9TKramer VM-9T
Kramer VM-9T
AV ProfShop
 
Kramer VM-9T
Kramer VM-9TKramer VM-9T
Kramer VM-9T
AV ProfShop
 
Kramer VM-80A
Kramer VM-80AKramer VM-80A
Kramer VM-80A
AV ProfShop
 
Kramer VM-80A
Kramer VM-80AKramer VM-80A
Kramer VM-80A
AV ProfShop
 
Kramer VM-1110xl
Kramer VM-1110xlKramer VM-1110xl
Kramer VM-1110xl
AV ProfShop
 
Kramer VM-1110XL
Kramer VM-1110XLKramer VM-1110XL
Kramer VM-1110XL
AV ProfShop
 
Kramer VS-121-HCA
Kramer VS-121-HCAKramer VS-121-HCA
Kramer VS-121-HCA
AV ProfShop
 
Kramer VM-1610
Kramer VM-1610Kramer VM-1610
Kramer VM-1610
AV ProfShop
 
Kramer VM-1610
Kramer VM-1610Kramer VM-1610
Kramer VM-1610
AV ProfShop
 
Sound Devices MixPre
Sound Devices MixPreSound Devices MixPre
Sound Devices MixPre
AV ProfShop
 
Kramer VM-1120
Kramer VM-1120Kramer VM-1120
Kramer VM-1120
AV ProfShop
 
Kramer VM-1120
Kramer VM-1120Kramer VM-1120
Kramer VM-1120
AV ProfShop
 
Kramer VP-23RC
Kramer VP-23RCKramer VP-23RC
Kramer VP-23RC
AV ProfShop
 
Kramer VP-23RC
Kramer VP-23RCKramer VP-23RC
Kramer VP-23RC
AV ProfShop
 
Kramer VP-108
Kramer VP-108Kramer VP-108
Kramer VP-108
AV ProfShop
 
Kramer VP-108
Kramer VP-108Kramer VP-108
Kramer VP-108
AV ProfShop
 
Kramer VS-801-XLM
Kramer VS-801-XLMKramer VS-801-XLM
Kramer VS-801-XLM
AV ProfShop
 
Kramer VS-55A
Kramer VS-55AKramer VS-55A
Kramer VS-55A
AV ProfShop
 
Direct Out Technologies Andiamo.MC
Direct Out Technologies Andiamo.MCDirect Out Technologies Andiamo.MC
Direct Out Technologies Andiamo.MC
Radikal Ltd.
 
NORSAT_KU-BAND_1401XRT_40W_NON-INVERTED_BUC
NORSAT_KU-BAND_1401XRT_40W_NON-INVERTED_BUCNORSAT_KU-BAND_1401XRT_40W_NON-INVERTED_BUC
NORSAT_KU-BAND_1401XRT_40W_NON-INVERTED_BUC
Sarren820
 

Similar to Sonifex Product Update Sept10 (20)

Kramer VM-9T
Kramer VM-9TKramer VM-9T
Kramer VM-9T
 
Kramer VM-9T
Kramer VM-9TKramer VM-9T
Kramer VM-9T
 
Kramer VM-80A
Kramer VM-80AKramer VM-80A
Kramer VM-80A
 
Kramer VM-80A
Kramer VM-80AKramer VM-80A
Kramer VM-80A
 
Kramer VM-1110xl
Kramer VM-1110xlKramer VM-1110xl
Kramer VM-1110xl
 
Kramer VM-1110XL
Kramer VM-1110XLKramer VM-1110XL
Kramer VM-1110XL
 
Kramer VS-121-HCA
Kramer VS-121-HCAKramer VS-121-HCA
Kramer VS-121-HCA
 
Kramer VM-1610
Kramer VM-1610Kramer VM-1610
Kramer VM-1610
 
Kramer VM-1610
Kramer VM-1610Kramer VM-1610
Kramer VM-1610
 
Sound Devices MixPre
Sound Devices MixPreSound Devices MixPre
Sound Devices MixPre
 
Kramer VM-1120
Kramer VM-1120Kramer VM-1120
Kramer VM-1120
 
Kramer VM-1120
Kramer VM-1120Kramer VM-1120
Kramer VM-1120
 
Kramer VP-23RC
Kramer VP-23RCKramer VP-23RC
Kramer VP-23RC
 
Kramer VP-23RC
Kramer VP-23RCKramer VP-23RC
Kramer VP-23RC
 
Kramer VP-108
Kramer VP-108Kramer VP-108
Kramer VP-108
 
Kramer VP-108
Kramer VP-108Kramer VP-108
Kramer VP-108
 
Kramer VS-801-XLM
Kramer VS-801-XLMKramer VS-801-XLM
Kramer VS-801-XLM
 
Kramer VS-55A
Kramer VS-55AKramer VS-55A
Kramer VS-55A
 
Direct Out Technologies Andiamo.MC
Direct Out Technologies Andiamo.MCDirect Out Technologies Andiamo.MC
Direct Out Technologies Andiamo.MC
 
NORSAT_KU-BAND_1401XRT_40W_NON-INVERTED_BUC
NORSAT_KU-BAND_1401XRT_40W_NON-INVERTED_BUCNORSAT_KU-BAND_1401XRT_40W_NON-INVERTED_BUC
NORSAT_KU-BAND_1401XRT_40W_NON-INVERTED_BUC
 

More from Radikal Ltd.

Digigram video over-ip solutions
Digigram video over-ip solutionsDigigram video over-ip solutions
Digigram video over-ip solutions
Radikal Ltd.
 
Voice Technologies VT403wa
Voice Technologies VT403waVoice Technologies VT403wa
Voice Technologies VT403wa
Radikal Ltd.
 
Amina bellevue case study
Amina bellevue case studyAmina bellevue case study
Amina bellevue case study
Radikal Ltd.
 
Audio Media Monitors Headphones Guide 2014
Audio Media Monitors Headphones Guide 2014Audio Media Monitors Headphones Guide 2014
Audio Media Monitors Headphones Guide 2014
Radikal Ltd.
 
Eve Audio Catalog 2014
Eve Audio Catalog 2014Eve Audio Catalog 2014
Eve Audio Catalog 2014
Radikal Ltd.
 
Barix kullanim alanlari
Barix kullanim alanlariBarix kullanim alanlari
Barix kullanim alanlari
Radikal Ltd.
 
Barix katalog 2014
Barix katalog 2014Barix katalog 2014
Barix katalog 2014
Radikal Ltd.
 
Barix ürünler 2014 lo
Barix ürünler 2014 loBarix ürünler 2014 lo
Barix ürünler 2014 lo
Radikal Ltd.
 
Digigram Aqilimfit
Digigram AqilimfitDigigram Aqilimfit
Digigram Aqilimfit
Radikal Ltd.
 
Yellowtec m!ka kurulum kılavuzu
Yellowtec m!ka kurulum kılavuzuYellowtec m!ka kurulum kılavuzu
Yellowtec m!ka kurulum kılavuzu
Radikal Ltd.
 
Yellowtec 2014 katalog
Yellowtec 2014 katalogYellowtec 2014 katalog
Yellowtec 2014 katalog
Radikal Ltd.
 
Audemat GoldenEagle FM 201311 tr
Audemat GoldenEagle FM 201311 trAudemat GoldenEagle FM 201311 tr
Audemat GoldenEagle FM 201311 tr
Radikal Ltd.
 
Sound Devices 633 tr
Sound Devices 633 trSound Devices 633 tr
Sound Devices 633 tr
Radikal Ltd.
 
Dynaudio choosing-by-ear-whitepaper
Dynaudio choosing-by-ear-whitepaperDynaudio choosing-by-ear-whitepaper
Dynaudio choosing-by-ear-whitepaper
Radikal Ltd.
 
Sound devices pix260i
Sound devices pix260iSound devices pix260i
Sound devices pix260i
Radikal Ltd.
 
Proel V15A Review by Pro Mobile magazine
Proel V15A Review by Pro Mobile magazineProel V15A Review by Pro Mobile magazine
Proel V15A Review by Pro Mobile magazine
Radikal Ltd.
 
Wired uk karnaval
Wired uk karnavalWired uk karnaval
Wired uk karnaval
Radikal Ltd.
 
Glensound - the complete commentary guide
Glensound - the complete commentary guideGlensound - the complete commentary guide
Glensound - the complete commentary guide
Radikal Ltd.
 
Hd ob vans with lawo_2013
Hd ob vans with lawo_2013Hd ob vans with lawo_2013
Hd ob vans with lawo_2013
Radikal Ltd.
 
Digigram aqord link tr
Digigram aqord link trDigigram aqord link tr
Digigram aqord link tr
Radikal Ltd.
 

More from Radikal Ltd. (20)

Digigram video over-ip solutions
Digigram video over-ip solutionsDigigram video over-ip solutions
Digigram video over-ip solutions
 
Voice Technologies VT403wa
Voice Technologies VT403waVoice Technologies VT403wa
Voice Technologies VT403wa
 
Amina bellevue case study
Amina bellevue case studyAmina bellevue case study
Amina bellevue case study
 
Audio Media Monitors Headphones Guide 2014
Audio Media Monitors Headphones Guide 2014Audio Media Monitors Headphones Guide 2014
Audio Media Monitors Headphones Guide 2014
 
Eve Audio Catalog 2014
Eve Audio Catalog 2014Eve Audio Catalog 2014
Eve Audio Catalog 2014
 
Barix kullanim alanlari
Barix kullanim alanlariBarix kullanim alanlari
Barix kullanim alanlari
 
Barix katalog 2014
Barix katalog 2014Barix katalog 2014
Barix katalog 2014
 
Barix ürünler 2014 lo
Barix ürünler 2014 loBarix ürünler 2014 lo
Barix ürünler 2014 lo
 
Digigram Aqilimfit
Digigram AqilimfitDigigram Aqilimfit
Digigram Aqilimfit
 
Yellowtec m!ka kurulum kılavuzu
Yellowtec m!ka kurulum kılavuzuYellowtec m!ka kurulum kılavuzu
Yellowtec m!ka kurulum kılavuzu
 
Yellowtec 2014 katalog
Yellowtec 2014 katalogYellowtec 2014 katalog
Yellowtec 2014 katalog
 
Audemat GoldenEagle FM 201311 tr
Audemat GoldenEagle FM 201311 trAudemat GoldenEagle FM 201311 tr
Audemat GoldenEagle FM 201311 tr
 
Sound Devices 633 tr
Sound Devices 633 trSound Devices 633 tr
Sound Devices 633 tr
 
Dynaudio choosing-by-ear-whitepaper
Dynaudio choosing-by-ear-whitepaperDynaudio choosing-by-ear-whitepaper
Dynaudio choosing-by-ear-whitepaper
 
Sound devices pix260i
Sound devices pix260iSound devices pix260i
Sound devices pix260i
 
Proel V15A Review by Pro Mobile magazine
Proel V15A Review by Pro Mobile magazineProel V15A Review by Pro Mobile magazine
Proel V15A Review by Pro Mobile magazine
 
Wired uk karnaval
Wired uk karnavalWired uk karnaval
Wired uk karnaval
 
Glensound - the complete commentary guide
Glensound - the complete commentary guideGlensound - the complete commentary guide
Glensound - the complete commentary guide
 
Hd ob vans with lawo_2013
Hd ob vans with lawo_2013Hd ob vans with lawo_2013
Hd ob vans with lawo_2013
 
Digigram aqord link tr
Digigram aqord link trDigigram aqord link tr
Digigram aqord link tr
 

Recently uploaded

Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and MilvusBuilding Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
Zilliz
 
Dandelion Hashtable: beyond billion requests per second on a commodity server
Dandelion Hashtable: beyond billion requests per second on a commodity serverDandelion Hashtable: beyond billion requests per second on a commodity server
Dandelion Hashtable: beyond billion requests per second on a commodity server
Antonios Katsarakis
 
TrustArc Webinar - 2024 Global Privacy Survey
TrustArc Webinar - 2024 Global Privacy SurveyTrustArc Webinar - 2024 Global Privacy Survey
TrustArc Webinar - 2024 Global Privacy Survey
TrustArc
 
SAP S/4 HANA sourcing and procurement to Public cloud
SAP S/4 HANA sourcing and procurement to Public cloudSAP S/4 HANA sourcing and procurement to Public cloud
SAP S/4 HANA sourcing and procurement to Public cloud
maazsz111
 
A Comprehensive Guide to DeFi Development Services in 2024
A Comprehensive Guide to DeFi Development Services in 2024A Comprehensive Guide to DeFi Development Services in 2024
A Comprehensive Guide to DeFi Development Services in 2024
Intelisync
 
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of GermanyPresentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
innovationoecd
 
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
alexjohnson7307
 
AWS Cloud Cost Optimization Presentation.pptx
AWS Cloud Cost Optimization Presentation.pptxAWS Cloud Cost Optimization Presentation.pptx
AWS Cloud Cost Optimization Presentation.pptx
HarisZaheer8
 
Columbus Data & Analytics Wednesdays - June 2024
Columbus Data & Analytics Wednesdays - June 2024Columbus Data & Analytics Wednesdays - June 2024
Columbus Data & Analytics Wednesdays - June 2024
Jason Packer
 
Serial Arm Control in Real Time Presentation
Serial Arm Control in Real Time PresentationSerial Arm Control in Real Time Presentation
Serial Arm Control in Real Time Presentation
tolgahangng
 
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Nordic Marketo Engage User Group_June 13_ 2024.pptxNordic Marketo Engage User Group_June 13_ 2024.pptx
Nordic Marketo Engage User Group_June 13_ 2024.pptx
MichaelKnudsen27
 
Fueling AI with Great Data with Airbyte Webinar
Fueling AI with Great Data with Airbyte WebinarFueling AI with Great Data with Airbyte Webinar
Fueling AI with Great Data with Airbyte Webinar
Zilliz
 
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdfHow to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
Chart Kalyan
 
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success StoryDriving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Safe Software
 
JavaLand 2024: Application Development Green Masterplan
JavaLand 2024: Application Development Green MasterplanJavaLand 2024: Application Development Green Masterplan
JavaLand 2024: Application Development Green Masterplan
Miro Wengner
 
Skybuffer SAM4U tool for SAP license adoption
Skybuffer SAM4U tool for SAP license adoptionSkybuffer SAM4U tool for SAP license adoption
Skybuffer SAM4U tool for SAP license adoption
Tatiana Kojar
 
GNSS spoofing via SDR (Criptored Talks 2024)
GNSS spoofing via SDR (Criptored Talks 2024)GNSS spoofing via SDR (Criptored Talks 2024)
GNSS spoofing via SDR (Criptored Talks 2024)
Javier Junquera
 
June Patch Tuesday
June Patch TuesdayJune Patch Tuesday
June Patch Tuesday
Ivanti
 
Astute Business Solutions | Oracle Cloud Partner |
Astute Business Solutions | Oracle Cloud Partner |Astute Business Solutions | Oracle Cloud Partner |
Astute Business Solutions | Oracle Cloud Partner |
AstuteBusiness
 
WeTestAthens: Postman's AI & Automation Techniques
WeTestAthens: Postman's AI & Automation TechniquesWeTestAthens: Postman's AI & Automation Techniques
WeTestAthens: Postman's AI & Automation Techniques
Postman
 

Recently uploaded (20)

Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and MilvusBuilding Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
 
Dandelion Hashtable: beyond billion requests per second on a commodity server
Dandelion Hashtable: beyond billion requests per second on a commodity serverDandelion Hashtable: beyond billion requests per second on a commodity server
Dandelion Hashtable: beyond billion requests per second on a commodity server
 
TrustArc Webinar - 2024 Global Privacy Survey
TrustArc Webinar - 2024 Global Privacy SurveyTrustArc Webinar - 2024 Global Privacy Survey
TrustArc Webinar - 2024 Global Privacy Survey
 
SAP S/4 HANA sourcing and procurement to Public cloud
SAP S/4 HANA sourcing and procurement to Public cloudSAP S/4 HANA sourcing and procurement to Public cloud
SAP S/4 HANA sourcing and procurement to Public cloud
 
A Comprehensive Guide to DeFi Development Services in 2024
A Comprehensive Guide to DeFi Development Services in 2024A Comprehensive Guide to DeFi Development Services in 2024
A Comprehensive Guide to DeFi Development Services in 2024
 
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of GermanyPresentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
 
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
 
AWS Cloud Cost Optimization Presentation.pptx
AWS Cloud Cost Optimization Presentation.pptxAWS Cloud Cost Optimization Presentation.pptx
AWS Cloud Cost Optimization Presentation.pptx
 
Columbus Data & Analytics Wednesdays - June 2024
Columbus Data & Analytics Wednesdays - June 2024Columbus Data & Analytics Wednesdays - June 2024
Columbus Data & Analytics Wednesdays - June 2024
 
Serial Arm Control in Real Time Presentation
Serial Arm Control in Real Time PresentationSerial Arm Control in Real Time Presentation
Serial Arm Control in Real Time Presentation
 
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Nordic Marketo Engage User Group_June 13_ 2024.pptxNordic Marketo Engage User Group_June 13_ 2024.pptx
Nordic Marketo Engage User Group_June 13_ 2024.pptx
 
Fueling AI with Great Data with Airbyte Webinar
Fueling AI with Great Data with Airbyte WebinarFueling AI with Great Data with Airbyte Webinar
Fueling AI with Great Data with Airbyte Webinar
 
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdfHow to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
 
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success StoryDriving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
 
JavaLand 2024: Application Development Green Masterplan
JavaLand 2024: Application Development Green MasterplanJavaLand 2024: Application Development Green Masterplan
JavaLand 2024: Application Development Green Masterplan
 
Skybuffer SAM4U tool for SAP license adoption
Skybuffer SAM4U tool for SAP license adoptionSkybuffer SAM4U tool for SAP license adoption
Skybuffer SAM4U tool for SAP license adoption
 
GNSS spoofing via SDR (Criptored Talks 2024)
GNSS spoofing via SDR (Criptored Talks 2024)GNSS spoofing via SDR (Criptored Talks 2024)
GNSS spoofing via SDR (Criptored Talks 2024)
 
June Patch Tuesday
June Patch TuesdayJune Patch Tuesday
June Patch Tuesday
 
Astute Business Solutions | Oracle Cloud Partner |
Astute Business Solutions | Oracle Cloud Partner |Astute Business Solutions | Oracle Cloud Partner |
Astute Business Solutions | Oracle Cloud Partner |
 
WeTestAthens: Postman's AI & Automation Techniques
WeTestAthens: Postman's AI & Automation TechniquesWeTestAthens: Postman's AI & Automation Techniques
WeTestAthens: Postman's AI & Automation Techniques
 

Sonifex Product Update Sept10

  • 1. Manufacturers of Audio & Video Products For Radio & TV Broadcasters New Products Update Sept 2010 w w w.sonifex.co.uk t: +44 (0)1933 650 700 f: +44 (0)1933 650 726 sales@sonifex.co.uk
  • 2. AUDIO & VIDEO INTERFACES Redbox - Audio Distribution Amplifiers RB-DA6R 6 Way Stereo Distribution Amplifier With RJ45 Connectors AUDIO DISTRIBUTION AMPLIFIERS The RB-DA6R is a 1U rack-mount high performance 6 way stereo distribution amplifier for splitting a source into a number balanced and can be wired unbalanced. of different outputs. The amplifier provides Each output is individually buffered so that a multiple balanced audio outputs using short circuit on one output won’t affect the Distortion: 0.01% THD @ 1kHz, ref +8dBu output RJ45 connectors wired to the StudioHub+TM Noise: -100dB unity gain, ref +8dBu output others. The left and right input gain controls standard *. (normalising) are pre-set potentiometers Connections By using RJ45 outputs, it allows simpler accessible through the front panel. Inputs: 2 x XLR 3 pin female, 1 x RJ45 socket balanced) CAT5 cabling to used to connect the 2 x phono sockets (unbalanced) The output gain may be varied from -8dB amplifier to other products. Outputs: 6 x RJ45 sockets to 18dB which is useful for normalising (all balanced, can be unbalanced) The RB-DA6R has one stereo input which consumer and professional signals to give Mains Input: Filtered IEC, switchable 110-120V, or is switchable via a rear panel push switch outputs of -15dBu and 0dBu respectively. 220-240V, fused, 6W max between paralleled balanced inputs (2 x Fuse Rating: Anti-surge fuse 100mA 20 x 5mm (230VAC) Audio Specification For RB-DA6R Anti-surge fuse 250mA 20 x 5mm (115VAC) XLR sockets or 1 x stereo input on RJ45) and Equipment Type Maximum +28dBu unbalanced inputs (1 pair of stereo phono Input Level: RB-DA6R: 6 way stereo distribution amplifier with sockets). Maximum +28dBu RJ45 connectors Output Level: The unit has 6 stereo outputs on 6 x RJ45 Physical Specification Frequency 20Hz to 20kHz ±0.1dB (600Ω load, Dimensions 48cm (W) x 10.8cm (D) x 4.2cm (H) (1U) connectors. The unit can also be configured Response: ref 1kHz) (Raw): 19” (W) x 4.3” (D) x 1.7” (H) (1U) so that 1 mono input can be distributed Gain Range: Adjustable 8dB loss to 18dB gain (L & R adjust) Dimensions 53cm (W) x 20.5cm (D) x 6cm (H) to 12 outputs by use of a switch which is (Boxed): 21” (W) x 8” (D) x 2.4” (H) Common >66dB typically Weight: Nett: 1.3kg Gross: 1.9kg recessed on the front panel to prevent it Mode Rejection: Nett: 2.9lbs Gross: 4.2lbs being accidentally knocked. Input impedance: >20kΩ bridging (balanced) >10kΩ (unbalanced) Accessories The inputs and outputs are electronically Output impedance: <50Ω RB-RK3: 1U Rear panel rack kit for large Redboxes RB-DA6RG 6 Way Stereo Distribution Amplifier With RJ45 Connectors & Output Gain Control The RB-DA6RG is a 1U rack-mount high to the RB-DA6R with the addition of Audio Specification For RB-DA6RG performance 6 way stereo distribution individual output gain adjustment, instead As per RB-DA6R with the following difference: amplifier for splitting a source into a of global stereo gain adjustment. Gain Range: Adjustable 8dB loss to 18dB gain number of different outputs. It is identical (12 adjustable pots) * StudioHub+TM is a registered trademark of Radio Systems Inc 2 Tel: +44 (0)1933 650 700 Fax: +44 (0)1933 650 726 Email: sales@sonifex.co.uk Internet: www.sonifex.co.uk
  • 3. AUDIO & VIDEO INTERFACES Redbox - Audio Distribution Amplifiers RB-DDA22 Digital Audio Distribution Amplifier With Multiple Outputs 192 AUDIO DISTRIBUTION AMPLIFIERS “ The RB-DDA22 is a multiple input and Note: The BNC outputs can be converted When an input is selected, multiple output digital audio distribution to S/PDIF outputs using a simple locking it is copied to all of the available amplifier designed to accept one of 5 connector, available separately, giving an outputs. There are 5 sets of digital different digital inputs, amplify it and output additional 6 x S/PDIF outputs, if required. “ audio outputs, providing 22 outputs this to 22 digital audio outputs in 5 different audio formats. Technical Specification For RB-DDA22 in total. Audio Specification Input & Output 110Ω ±20% AES/EBU balanced I/O It accepts signals with sample rates in the Impedances: 75Ω ±5% S/PDIF unbalanced I/O range 32kHz to 192kHz and distributes them 75Ω ±5% TOSlink unbalanced I/O Signal Level: Balanced: 3V/10V peak to peak without sample rate conversion. min/max Unbalanced: Min 0.5V±20% peak There are 5 inputs, one each of balanced to peak Sample 32, 44.1, 48, 88.2, 96,176.4 or 192kHz AES/EBU on an XLR socket, unbalanced Frequencies: AES/EBU on BNC, balanced AES/EBU on an Bit Depth: Up to and including 24 bit RJ45 socket, unbalanced S/PDIF on a phono Front Panel Operational Controls & Indicators socket and a TOSlink optical connection. Digital AES/EBU (XLR), AES/EBU (BNC), AES/EBU Input Select: (RJ45), S/PDIF or TOSlink optical An illuminated front panel input select push Indicators: Input presence indicators via tricolour LEDS around the input select button button is used to choose one of the 5 inputs, Connections or to select the Auto Mode. In Auto Mode Digital Inputs: 1 x AES/EBU XLR 3 pin socket the unit interrogates each of the inputs in 1 x AES/EBU BNC 1 x AES/EBU RJ45 socket (StudioHub+TM) turn until it finds a lock. The select button 1 x S/PDIF RCA phono socket 1 x TOSLink optical input flashes to indicate loss of lock and the tri- Digital Outputs: 6 x AES/EBU XLR 3 pin plug colour input LEDs around the push button 6 x AES/EBU BNC 6 x AES/EBU RJ45 socket (StudioHub+TM) indicate signal presence. 2 x S/PDIF RCA phono socket 2 x TOSLink optical output When an input is selected, it is copied to Mains Input: Universal filtered IEC, continuously rated 85-264VAC@47- 63Hz, max 10W all of the available outputs. There are 5 Fuse Rating: Anti-surge fuse 1A 20 x 5mm sets of digital audio outputs consisting of: Equipment Type 6 x balanced AES/EBU on XLR plugs, 6 x RB-DDA22: Digital audio distribution amplifier with professional unbalanced AES/EBU on BNCs, multiple outputs 6 x balanced AES/EBU on RJ45 sockets, 2 x Physical Specification unbalanced S/PDIF on phono sockets and 2 Dimensions 48cm (W) x 10.8cm (D) x 4.2cm (H) (1U) (Raw): 19” (W) x 4.3” (D) x 1.7” (H) (1U) x TOSlink optical outputs, giving 22 outputs Dimensions 53cm (W) x 20.5cm (D) x 6cm (H) (Boxed): 21” (W) x 8” (D) x 2.4” (H) in total, 12 balanced and 10 unbalanced. Weight: Nett: 1.4kg Gross: 2.0kg Nett: 3.0lbs Gross: 4.4lbs The RJ45 input and output connections use Accessories the StudioHub+TM * wiring standard for the RB-RK3: 1U Rear panel rack kit for large balanced AES/EBU connections. Redboxes * StudioHub+TM is a registered trademark of Radio Systems Inc Tel: +44 (0)1933 650 700 Fax: +44 (0)1933 650 726 Email: sales@sonifex.co.uk Internet: www.sonifex.co.uk 3
  • 4. AUDIO & VIDEO INTERFACES Redbox - Synchronisers, Delays & Silence Detectors RB-DSD8 8 Channel Silence Switcher SYNCHRONISERS, DELAYS & SILENCE DETECTORS The RB-DSD8 8 channel silence switcher status of the digital audio on that channel durations, levels and switching functions so works in a similar way to the Sonifex and a Selection LED to show that input is that you can set up the unit for your specific RB-SD1 and RB-DSD1 but allows for 4 currently being sent to each respective application. A DIPSwitch configures the unit stereo channels of audio. These stereo output. Two Presence LEDS for the left and to be controlled serially which is indicated audio channels can be either analogue or right inputs of each stereo pair indicate the by a front panel LED. You can control the digital and can be used independently to input level of the channels. unit remotely using either USB or Ethernet. give 4 stereo silence detectors or they can The unit can switch between sources The RB-DSD8 has been designed with dual be linked to handle multichannel audio manually or automatically at the push of redundant power supplies. This means inputs, e.g. for 5.1 and 7.1 surround systems. a button. If switching manually, silence that if either power supply fails, the other Designed to switch from one input (or set detection is disabled and the user chooses is ready to take over. In the extremely of inputs) to another in the event of loss of when to switch using the main or backup unlikely event that both fail, the unit has audio, the unit is ideal at transmitter sites, or buttons. If switching automatically, the been designed with a passive signal path after the master output of a studio, to switch unit switches between the two sources through the main input. This is essential in another audio source, or simultaneous automatically upon the detection of for applications such as installation at broadcast, should a master source fail. silence. Each pair can be set to switch transmitter sites, where a power failure to The unit can switch: manually or automatically and the current the unit should not prevent the audio input • On loss of level of the main input. setting is indicated by the Mode LED. Link/ signal from being output to the transmitter. • On loss of level on one channel of the Select buttons are used to group channels main input. Contact Sonifex for further information if together to access multichannel operation • On loss of synchronisation lock of a main you have a particular requirement that isn’t and switch simultaneously. Each pair has a digital input. catered for by the RB-DSD8 as standard. Link/Select button which illuminates blue The 2 x 8 channel audio inputs can accept when active. Pressing and holding the first Clocking & Synchronisation both digital and analogue connections, Link/Select button with any other Link/ All digital input signals are routed to a with the unit automatically recognising a Select button causes all inputs up to that sample rate converter allowing mixed digital input. For the 8 channel outputs, by point to be selected. incoming sample rates to be used. The setting the appropriate DIPSwitches, each output sample rates are selectable from a The RB-DSD8 has a ‘slave mode’ that allows stereo output can be designated as either predefined master clock of 32kHz, 44.1kHz, you to connect two RB-DSD8 units and an analogue pair or as a digital output, thus 48kHz, 88.2kHz, 96kHz, 176.4kHz or 192kHz control them simultaneously from one unit. making the RB-DSD8 incredibly flexible and or the clock can be derived from a sync suitable for many different applications. The silence detect level is adjustable input. When analogue inputs are selected, The unit level settings are in dBFS but when between -39dBFS and -84dBFS in 3dBFS the analogue to digital converters are also using analogue signals the equivalent full steps via DIPSwitches and this level is clocked at that sample rate. scale value can be set to +24dBu, +18dBu, or compared to peak signals. The silence DIPSwitches choose the synchronisation +12dBu by DIPSwitches. interval can be adjusted between 2 seconds mode and the sync source from TTL and 254 seconds in 2 second steps via Each stereo pair has individual settings and wordclock or AES/EBU through the dual- DIPSwitches. controls and when stereo signals are linked, purpose synchronising input as standard. the foremost pair determines the switching A powerful feature of the RB-DSD8 is that A front panel indicator shows the status of characteristics and controls to be used. Each by using the Sonifex SCi serial software, the the synchronization input. Selectable sync stereo pair has an AES LED that shows the unit can be programmed for different delay modes are as follows: 4 Tel: +44 (0)1933 650 700 Fax: +44 (0)1933 650 726 Email: sales@sonifex.co.uk Internet: www.sonifex.co.uk
  • 5. AUDIO & VIDEO INTERFACES Redbox - Synchronisers, Delays & Silence Detectors Master Mode Audio Specification - Analogue Remote Control Enabled or disabled, via rear panel Maximum Input +24dBu Enable: DIPswitch In this mode the digital output sample rate Level: Sync Mode & Sync in master mode or sync from is simply set by, and locked to, the internal Input Impedance: >20kΩ bridging balanced Source Select: MAIN input1, AES or wordclock sync input in auto or slave mode, via on-board clock generator. No sync signal is Dynamic Range: >110dB rear panel DIPswitches Distortion & Noise: >82dB THD + N at 1kHz used or required. Remote Start: Latched or momentary, via Common Mode >60dB , ref 0dBu DIPswitch Rejection: Input Lock Loss: Switch immediately or treat as Auto Lock Mode SYNCHRONISERS, DELAYS & SILENCE DETECTORS silence delay, via rear panel Front Panel Operational Controls In this mode no output is generated until DIPswitch Switch Mode Select: Via AUTO, MANUAL or SLAVE Digital or Digital or analogue, via rear panel lock is achieved with a sync signal. The push-buttons Analogue Output: DIPswitches Manual Source Via MAIN and BACKUP digital output sample rate now follows the Select: push-buttons Full Scale Line Up: 24, 18 or 12 dBu = 0dBFS, via rear panel DIPswitches sync input. If the sync signal is removed Group Selection : Via LINK/SELECT push-buttons Boot Mode: Boot in boot or normal via rear then the output sample rate is set by, and Front Panel Indicators panel DIPswitch Presence LEDs: For all input channels Connections locked to, the internal on-board clock Link LEDs: Show which channels are Digital/Analogue 2 x 8 channel inputs on generator at the closest frequency available controlled concurrently Inputs: 2 x 25 pin D-type male to the previous sync input. Mode LEDs: Indicate the current mode selected Digital/Analogue 1 x 8 channel outputs on for each group Outputs: 1 x 25 pin D-type female Selection LEDs: Indicate whether MAIN or BACKUP Sync Inputs: 1 x BNC (Wordclock or AES) Slave Mode is selected Remote I/O Port: 25 way D-type female Here the digital output sample rate follows AES LEDs: Show the state of the digital input to SCi port: USB or ethernet each group the sync input. When the sync signal is not Mains Input: 2 x Universal filtered IEC, PSU LEDs: Show the state of each power continuously rated 85-264VAC present the digital output is turned off. supply @47- 63Hz, max 60W Remote Control LED: Show if remote control is selected Fuse Rating: 2 X Anti-surge fuse 2A 20 x 5mm External Sync LED: Show the state of any sync inputs used. Equipment Type Audio Specification For RB-DSD8 RB-DSD8: 8 channel silence switcher Rear Panel - Operational Controls Audio Specification - Digital Silence Threshold: -39dBfs to -84dBfs in 3dBfs Physical Specifications Dynamic Range: >138dB steps, via rear panel DIPSwitches Dimensions 48cm(W) x 22cm(D) x 4.2cm(H) 1U Distortion & Noise: <-137dB THD + N at 1kHz, Silence Duration: 0 - 254 seconds in 2 second (Raw): 19” (W) x 8.7” (D) x 1.7” (H) 1U ref 0dBFS intervals duration, via rear panel Weight: Nett: 2.3kg Gross: 2.9kg DIPSwitches Nett: 5.1lb Gross: 6.4lb Input & Output 110Ω ± 20% AES/EBU balanced Impedances: I/O 50Ω BNC TTL word clock input Stereo/Mono Stereo or mono, via rear panel * Note that this product is deeper than standard Switching: DIPSwitch Redboxes Signal Level: Balanced: 3V/10V peak to peak min/max Master Select: 32, 44.1, 48, 88.2, 96,176.4 or 192kHz Output sample rate, via rear panel Accessories Sample Rates: 32, 44.1, 48, 88.2, 96,176.4 or DIPSwitches RB-RK3: 1U Rear panel rack kit for large 192kHz Redboxes Ignore Silence: Each channel can be set to ignore Bit Depth: Up to and including 24 bit silences, via rear panel DIPswitches RB-DEED8 Dolby® E Encoder 8 Channel, Digital Inputs Dolby® and the double-D symbol are registered trademarks of Dolby Laboratories The RB-DEED8 is a Dolby® E Encoder. It either BNC or D-type connectors. These I/O between NTSC, PAL or Tri-level sync. encodes up to 8 digital audio channels into connections are paralleled, allowing one 8 general purposes inputs and 8 outputs a single Dolby bitstream output. There is type to be used per input or output. are available on a rear panel 25 way D-type also an extra Dolby output for connection to Metadata can be input to the encoder using socket whose function can be programmed monitoring equipment. RS-485 via the external 9-pin D-type socket using the menu, e.g. alarm outputs for loss Each digital input channel has independent on the rear panel and can also be viewed of input or encoder errors. level control, which can be adjusted from using the SCi software. The unit is controlled locally using the front -24dB through to +24dB in 0.5dB steps. The A video input is used to genlock the audio panel display and control knob but can digital inputs and outputs can be selected to output and Dolby® E encoding to a known be remote controlled via an RS-232 serial be either balanced or unbalanced AES/EBU video reference. This input autodetects connection using the Sonifex SCi software. specification, and can be connected through Tel: +44 (0)1933 650 700 Fax: +44 (0)1933 650 726 Email: sales@sonifex.co.uk Internet: www.sonifex.co.uk 5
  • 6. AUDIO & VIDEO INTERFACES Redbox - Dolby® Encoders & Decoders RB-DEED8 Dolby® E Encoder 8 Channel, Digital Inputs (continued...) Audio Specification For RB-DEED8 Video Reference Physical Specifications Output Sample 48kHz Reference Type: Autodetect NTSC, PAL or Tri-level Dimensions 48cm (W) x 10.8cm (D*)x 4.2cm (H) Rate: sync (Raw): 19” (W) x 4.3” (D*) x 1.7” (H) (1U) Input Sample Rates: CH1/2 & CH3/4: 32-192kHz Impedance: 75Ω Dimensions 59cm (W) x 27.5cm (D) x 11cm (H) CH5/6 & CH7/8: 32-48kHz Connector: 1 x BNC (Boxed): 23.2” (W) x 10.8” (D) x 4.3” (H) DOLBY® ENCODERS & DECODERS Input & Output 75Ω/110Ω selectable LTC Input: 1 x BNC (not used) Weight: Nett: 1.8kg Gross: 2.3kg Impedance: Nett: 4.0lb Gross: 5.1lb Operational Control Signal Level Unbalanced: 1Vp-p +/- 20% * Note that this product is deeper than standard (un-terminated): Balanced: 6.6Vp-p +/- 20% Display: Vacuum fluorescent display Redboxes Digital Audio I/O: System Navigation: Rotary selector with integral push- Inputs: 8 input channels via 4 x BNCs or switch Equipment Type 25 way D-type socket (AES3) Additional Connections RB-DEED8 Dolby® E encoder 8 channel, digital Dolby Output 1: 1 x Dolby bitstream output via BNC Remote 25-way ‘D’-type socket inputs Dolby Output 2: 1 x Dolby bitstream output via BNC Input/Output Port: Accessories or 25 way D-type socket (AES3) Serial Port: RS232, 9 way D-type RB-RK3: 1U Rear panel rack kit for large Digital Audio 6 x BNC Power Supply: Universal filtered IEC, continuously Redboxes Connectors: 1 x 25-way D-type socket rated 85-264VAC @47-63Hz, fused Metadata: SMPTE-RDD06, 9 way D-type socket Fuse Rating: Anti-surge fuse 1A 20 x 5mm RB-DEDD8 Dolby® E & Dolby Digital Decoder 8 Channel, Digital Outputs The RB-DEDD8 is a Dolby® E & Dolby Digital 8 general purposes inputs and 8 outputs Video Reference Decoder. It decodes an incoming Dolby are available on a rear panel 25 way D-type Reference Type: Autodetect NTSC, PAL or Tri-level sync bitstream and transmits the decoded socket whose function can be programmed Impedance: 75Ω outputs on BNC or D-type connectors on the using the menu, e.g. alarm outputs for loss Connector: 1 x BNC rear panel. The Dolby input is also looped of input or decoder errors. LTC Output: 1 x BNC (not used) through to allow connection to other Dolby Operational Control The unit is controlled locally through the receiver equipment. Display: Vacuum fluorescent display front panel display but can be remote System Navigation: Rotary selector with integral push- Each digital output channel has independent controlled via an RS-232 serial connection switch level control, which can be adjusted from using the Sonifex SCi software. Additional Connections Remote 25-way ‘D’-type socket -24dB through to +24dB in 0.5dB steps. The Input/Output Port: digital inputs and outputs can be selected to Serial Port: RS232, 9 way D-type socket Audio Specification For RB-DEDD8 be either balanced or unbalanced AES/EBU Power Supply: Universal filtered IEC, continuously Output Sample 48kHz rated 85-264VAC @47-63Hz, fused specification, and can be connected through Rate: Fuse Rating: Anti-surge fuse 1A 20 x 5mm either BNC or D-type connectors. These I/O Input Sample Rates: 32-48kHz Physical Specifications connections are paralleled, allowing one type Input & Output 75Ω/110Ω selectable Dimensions 48cm (W) x 10.8cm (D*)x 4.2cm (H) Impedance: to be used per input or output. Signal Level Unbalanced: 1Vp-p ±20% (Raw): 19” (W) x 4.3” (D*) x 1.7” (H) (1U) (Un-terminated): Balanced: 6.6Vp-p ±20% Dimensions 59cm (W) x 27.5cm (D) x 11cm (H) The metadata output from the decoder is Digital Audio I/O: (Boxed): 23.2” (W) x 10.8” (D) x 4.3” (H) transmitted using RS-485 via the external Dolby Input: 1 x Dolby bitstream input via BNC Weight: Nett: 1.8kg Gross: 2.3kg Nett: 4.0lb Gross: 5.1lb 9-pin D-type socket on the rear panel and can Outputs: 8 x Digital audio output channels & 2 x Auxiliary audio output (stereo * Note that this product is deeper than standard also be viewed using the SCi software. downmix) channels via 5 x BNCs or Redboxes 25 way D-type socket Equipment Type A video input is used to genlock the audio Dolby Output: 1 x Dolby bitstream output via BNC RB-DEDD8 Dolby® E & Dolby Digital decoder 8 or D-type outputs and Dolby® E decoding to a known channel, digital outputs Digital Audio 7 x BNC video reference. This input autodetects Connectors: 1 x 25 way D-type socket Accessories between NTSC, PAL or Tri-level sync. Metadata: SMPTE-RDD06, 9 way D-type socket RB-RK3: 1U Rear panel rack kit for large Redboxes Dolby® and the double-D symbol are registered trademarks of Dolby Laboratories 6 Tel: +44 (0)1933 650 700 Fax: +44 (0)1933 650 726 Email: sales@sonifex.co.uk Internet: www.sonifex.co.uk
  • 7. AUDIO & VIDEO INTERFACES Redbox - Video Embedders & De-embedders RB-VHEDD8 3G/HD/SD-SDI Dolby® E Encoder & Embedder The RB-VHEDD8 is a Dolby® E Encoder and Embedder. It encodes 8 channels VIDEO EMBEDDERS & DE-EMBEDDERS of audio into two channels of an AES/EBU digital audio stream which is then embedded onto any of the available groups within each of the two video output paths. It is also transmitted on a BNC or D-type on the rear panel. The audio inputs to the encoder can be Audio Specification For RB-VHEDD8 Signal Level Unbalanced: 1Vp-p ±20% (Un-terminated): Balanced: 6.6Vp-p ±20% selected to either come from the external SDI Specification SDI Input: 1 x BNC, 3G/HD/SD-SDI Digital Audio I/O: audio inputs via the BNC or D-type Inputs: 8 x digital audio input channels via SDI Outputs: 2 x BNC, 3G/HD/SD-SDI, re-clocked 4 x BNCs or 25 way D-type socket connections on the rear panel or from the Impedance: 75Ω (AES3) audio in the incoming SDI input. Similarly, Output Alignment <0.2UI (3G <0.3UI) Outputs: 2 output channels via 1 x BNC Jitter: or 25 way D-type socket (AES3) the metadata input for the encoder can be Digital Audio 5 x BNC Output Level: 800mV ±10% selected to either come via the external Return Loss: <15dB at 1500MHz Connectors: 1 x 25-way D-type socket 9-pin D-type on the rear panel or from SDI Supported 270Mbps, SMPTE-259M-C (SD) LTC Input: 1 x BNC (not used) Standards: 1.485 or 1.4835Gbps, SMPTE-292M Operational Control metadata embedded into the vertical (HD) Display: Vacuum fluorescent display blanking area of the video input. 2.97 or 2.967Gbps, SMPTE-424M (3G), SMPTE-425M-A System Navigation: Rotary selector with integral push- switch Supported Video 525/59.94 (SMPTE-125M) The unit is controlled locally through the Formats: 625/50 (ITU-R BT.656) Additional Conections front panel display but can be remote 720p/23.98, 24, 25, 29.97, 30, 50, Ethernet Port: 10/100Mbps, RJ-45 59.94, 60 (SMPTE-296M) Remote 25-way ‘D’-type socket controlled via an ethernet connection using 1035i/59.94, 60 (SMPTE-260M) Input/Output Port: 1080i/50, 59.94, 60 (SMPTE-274M) the Sonifex SCi software. The embedding 1080p/23.98, 24, 25, 50, 59.94, 60 Power Supply: Universal filtered IEC, continuously (SMPTE-274M) rated 85-264VAC @47-63Hz, fused channel routing is controlled using these 1080pSF/23.98, 24, 25, 29.97, 30 Fuse Rating: Anti-surge fuse 1A 20 x 5mm methods also. (RP-211) Physical Specifications 1080i/50 (SMPTE-295M) 1080p/50 (SMPTE-295M) Dimensions 48cm (W) x 10.8cm (D*)x 4.2cm (H) It has a triple rate SDI receiver with (Raw): 19” (W) x 4.3” (D*) x 1.7” (H) (1U) Embedded Audio: 24-bit, 48kHz synchronous automatic input rate detection and SMPTE-272M-C Dimensions 59cm (W) x 27.5cm (D) x 11cm (H) SMPTE-299M (Boxed): 23.2” (W) x 10.8” (D) x 4.3” (H) equalisation along with two re-clocked and Metadata: SMPTE-2020M Weight: Nett: 1.8kg Gross: 2.3kg Nett: 4.0lb Gross: 5.1lb individually buffered SDI outputs. It supports SMPTE-RDD06, 9-Pin D-type socket * Note that this product is deeper than standard the full range of 3G, HD and SD standards Audio Specifications Redboxes from NTSC and PAL up to 1080p 60Hz. Output Sample 48kHz Equipment Type Rate: RB-VHEDD8 3G/HD/SD-SDI Dolby® E encoder & Input Sample Rates: CH1/2 & CH3/4: 32-192kHz embedder Each digital input channel has independent CH5/6 & CH7/8: 32-48kHz Accessories level control, which can be adjusted from Input & Output 75Ω/110Ω selectable RB-RK3: 1U Rear panel rack kit for large Impedance: -24dB through to +24dB in 0.5dB steps. The Redboxes digital inputs and outputs can be selected to be either balanced or unbalanced AES/EBU Metadata Metadata Audio Audio SDI SDI Input VANC Pass / Embedder Transmitter Output 1 specification, and can be connected through De-embedder Delete CD either BNC or D-type connectors. These I/O connections are paralleled, allowing one SDI Audio SDI type to be used per input or output. Input SDI Receiver Audio De-embedder Pass / Audio Embedder SDI Transmitter Output 2 Delete EQ CD 8 general purposes inputs and 8 outputs are available on a rear panel 25 way D-type 8 socket whose function can be programmed Digital AES RX/TX Dolby E using the menu, e.g. alarm outputs for loss of Audio and Channel Routing Encoder input or encoder errors. I/O Termination & Level Select Control 2 8 RB-VHEDD8 Block Diagram Tel: +44 (0)1933 650 700 Fax: +44 (0)1933 650 726 Email: sales@sonifex.co.uk Internet: www.sonifex.co.uk 7
  • 8. AUDIO & VIDEO INTERFACES Redbox - Video Embedders & De-embedders RB-VHDDD8 3G/HD/SD-SDI Dolby® E & Dolby Digital Decoder & De-Embedder The RB-VHDDD8 is a Dolby® E & Dolby Digital Decoder and De-Embedder. It de-embeds up to 10 channels of audio VIDEO EMBEDDERS & DE-EMBEDDERS within any audio group of an SDI video signal and a further 2 which are sent to the Dolby® Decoder. The outputs from the Decoder or the De-embedder can then be re-embedded onto either of the two SDI outputs and also transmitted on a BNC or D-type situated on the rear panel. The metadata output from the decoder is transmitted using RS-485 via the external Audio Specification For RB-VHDDD8 Output Impedance: 75Ω/110Ω selectable SDI Specification Signal Level Unbalanced: 1Vp-p +/- 20% 9-pin D-type on the rear panel and can also (Un-terminated): Balanced: 6.4Vp-p +/- 20% SDI Input: 1 x BNC, 3G/HD/SD-SDI be embedded into the vertical blanking SDI Outputs: 2 x BNC, 3G/HD/SD-SDI, re-clocked Digital Audio 12 output channels via 6 x BNC or Outputs: 25 way D-type socket (AES3) space onto either of the two SDI outputs. Impedance: 75Ω Digital Audio 6 x BNC Output Alignment <0.2UI (3G <0.3UI) Connectors: 1x 25-way D-type socket The unit is controlled locally through the Jitter: Output Level: 800mV ±10% Operational Control front panel display but can be remote Display: Vacuum fluorescent display Return Loss: <15dB at 1500MHz controlled via an ethernet connection using SDI Supported 270Mbps, SMPTE-259M-C (SD) System Navigation: Rotary selector with integral push- switch the Sonifex SCi software, through which Standards: 1.485 or 1.4835Gbps, SMPTE-292M (HD) Additional Conections metadata can also be viewed. It has a triple 2.97 or 2.967Gbps, SMPTE-424M Ethernet Port: 10/100Mbps, RJ-45 (3G), SMPTE-425M-A rate SDI receiver with automatic input rate Remote 25-way ‘D’-type socket Supported Video 525/59.94 (SMPTE-125M) Input/Output Port: detection and equalisation along with two Formats: 625/50 (ITU-R BT.656) 720p/23.98, 24, 25, 29.97, 30, 50, Power Supply: Universal filtered IEC, continuously re-clocked and individually buffered SDI 59.94, 60 (SMPTE-296M) rated 85-264VAC @47-63Hz, fused outputs. It supports the full range of 3G, HD 1035i/59.94, 60 (SMPTE-260M) Fuse Rating: Anti-surge fuse 1A 20 x 5mm 1080i/50, 59.94, 60 (SMPTE-274M) Physical Specifications and SD standards from NTSC and PAL up to 1080p/23.98, 24, 25, 50, 59.94, 60 (SMPTE-274M) Dimensions 48cm (W) x 10.8cm (D*)x 4.2cm (H) 1080p 60Hz. 1080pSF/23.98, 24, 25, 29.97, 30 (Raw): 19” (W) x 4.3” (D*) x 1.7” (H) (1U) (RP-211) Dimensions 59cm (W) x 27.5cm (D) x 11cm (H) Each digital output channel has 1080i/50 (SMPTE-295M) (Boxed): 23.2” (W) x 10.8” (D) x 4.3” (H) 1080p/50 (SMPTE-295M) Weight: Nett: 1.8kg Gross: 2.3kg independent level control which can be Embedded Audio: 24-bit, 48kHz synchronous Nett: 4.0lb Gross: 5.1lb adjusted from -24dB through to +24dB SMPTE-272M-C * Note that this product is deeper than standard SMPTE-299M Redboxes in 0.5dB steps. The digital outputs can Metadata: SMPTE-2020M SMPTE-RDD06, 9-Pin D-type Equipment Type be selected to be either balanced or Audio Specifications RB-VHDDD8 3G/HD/SD-SDI Dolby® E & Dolby unbalanced AES/EBU specification, and can Digital decoder & de-embedder Output Sample 48kHz be connected through either BNC or D-type Rate: Accessories connectors. These output connections are RB-RK3: 1U Rear panel rack kit for large Redboxes paralleled, allowing one type to be used per RB-VHDDD8 Block Diagram output. 8 general purposes Audio Metadata inputs and 8 outputs are Pass / Audio VANC SDI SDI Output 1 Embedder Transmitter available on a rear panel Delete Embed CD 25 way D-type socket whose function can be programmed using the SDI SDI Audio Audio Pass / Audio Metadata Vanc SDI SDI Input Receiver De-embedder Embedder Transmitter Output 2 menu, e.g. alarm outputs Delete Embed EQ CD for loss of input or decoder errors. 2 10 Channel Routing & Level Dolby E & Control Digital Dolby Digital 10 AES Audio Transmitter Decoder & Outputs Termination Select Metadata Output 8 Tel: +44 (0)1933 650 700 Fax: +44 (0)1933 650 726 Email: sales@sonifex.co.uk Internet: www.sonifex.co.uk
  • 9. TALKBACK & COMMUNICATIONS Talkback & Communications CM-TBU Line Powered Telephone Balance Unit The CM-TBU line-powered by the ‘ON’ LED, and can either be done after an outgoing call has been dialled on telephone balance unit a telephone set connected to the unit, or TALKBACK & COMMUNICATIONS is compatible with all to answer an incoming call after the ‘RING’ analogue direct exchange LED is seen to flash. Note that a telephone lines and provides a 4-wire set is not required for incoming calls unless an audible ring is required. If the sidetone communications system to level at the 4-wire output is found to be interface with the telephone excessive, the outgoing signal level can network. be reduced usingthe ‘SEND LEVEL’ control or the balance controls can be adjusted to The high degree of separation between minimize it. send and receive signals makes it suitable The unit is supplied with a connector and for use in telephone IFB (interrupted cable kit that enables connections to be foldback) applications and the high drive made to both UK Telecom or the universal capacity at the 4-wire output enables Front and rear view of the CM-TBU RJ11 sockets used in most telephone a presenter’s earpiece to be connected networks around the world. circuit by adjusting three elements (NULL, directly to the unit without an external R-BAL and C-BAL) via potentiometers which amplifier. simulate the complex line impedance. This This extremely compact unit is powered can be used to compensate for local line Technical Specification For CM-TBU from the telephone line and provides an variations or to adapt to the telephone 4-Wire Input interface to a 4-wire circuit with separate systems of other countries, where line Input Impedance: 10kΩ, transformer coupled level control of send and receive signals. characteristics may differ. Optimization of Input Connector: 3 pin XLR female connector the sidetone rejection does not involve the Input Level Range: -12dBU to +4dBU before Optimum rejection of the input signal on limiting when connected to use of any test equipment and can be easily an average line the 4-wire output is achieved in a bridge carried out while the system is in use. 4-Wire Output Output Impedance: 150Ω, transformer coupled Features of the CM-TBU Although the signal level being sent to the Output Connector: 3 pin XLR male connector line can be manually adjusted using the Output Level Range: -6dBU to +6dBU, for average • Isolated, full-duplex 4-wire interface ‘SEND LEVEL’ control over a wide range, the line level to direct non-digital telephone Sidetone Rejection: 30dB to 40dB average, depending level control is followed by a limiter that on line characteristics exchange lines. prevents the telephone line signal level 2-Wire • Line powered, requiring no battery or becoming overloaded or distorted. The Off Hook Voltage: 6V minimum external power. limiter drives a ‘LIMIT’ LED to indicate the 2 Wire Connectors: RJ11 socket - line • Simple optimization of sidetone RJ11 socket - handset onset of limiting. rejection with any country’s Front Panel Operational Controls telephone system. Line Connect: Push button with indicator Although the output stage can drive a Send Level: Small rotary control • LEDs indicating ‘Ring’, ‘Line Hold’ and presenter’s earpiece in a telephone IFB Receive Level: Large rotary control ‘Limit’ conditions. application, the ‘RECEIVE LEVEL’ control may Null Balance: Recessed preset potentiometer • Input level control with line-sensing not be accessible to the presenter, who is R Balance: Recessed preset potentiometer limiter and limit indicator. normally situated some distance from the C Balance: Recessed preset potentiometer • High drive output with level control unit. The presenter may then require a local Ring LED: Indicates incoming ringing for direct feed to presenter’s control of the earpiece signal level. The CM- Limit LED: Indicates limiter active earpiece, etc. TBU can be used to supply the correct signal On LED: Indicates connection to the telephone line • Loop-through RJ11 line sockets level to a suitable battery powered earpiece Equipment Type provide universal connection to line belt-pack unit. CM-TBU Line powered telephone and telephone set. balance unit To enable communication between the Physical Specification • Connection to the telephone set is 4-wire circuit and the telephone network, Dimensions: 77mm (W) x 83mm (D) x maintained while the unit is in use. 42mm (H) once the 4-wire and telephone line cable • Small, rugged extruded aluminium 3.0” (W) x 3.3” (D) x 1.7” (H) connections are made to the unit, the ‘LINE Weight: Nett: 0.25kg Gross: 0.75kg case with XLR3 male & female 4-wire CONNECT’ switch can be pressed to power Nett: 0.60lbs Gross: 1.7lbs connectors. the unit from the line. This is indicated Tel: +44 (0)1933 650 700 Fax: +44 (0)1933 650 726 Email: sales@sonifex.co.uk Internet: www.sonifex.co.uk 9
  • 10. TALKBACK & COMMUNICATIONS Talkback & Communications CM-TLL Line Powered Telephone Line Listen Unit The CM-TLL provides a The line and telephone set are connected to the unit via the RJ11 connectors in order Features of the CM-TLL low-loss interface to receive to make an outgoing call. A telephone may TALKBACK & COMMUNICATIONS & STUDIO ILLUMINATED SIGNS audio from a telephone line. not be required if calls are only incoming, • Audio interface to direct analogue exchange lines - receive calls with The line-powered unit is because telephone line ringing is indicated electrical isolation from the line. compatible with all analogue by a flashing LED built into the unit. In • Line powered, requiring no battery or either case, the ‘LINE CONNECT’ switch is direct exchange lines and pressed to make the line connection. The external power. • LEDs indicating ‘Ring’ and ‘On Hold’ includes an LED indication ‘ON’ LED indicates that the unit is powered conditions. of incoming calls. The unit is and that audio is routed to the line via the • Loop-through line sockets provide intended to be used with an XLR plug. in-line connection with existing earpiece amplifier to receive telephone. • Existing telephone remains an audio feed by telephone Technical Specification For CM-TLL 4-Wire Output connected when the unit is in use. from a studio. Output Impedance: 150Ω, transformer coupled • Line connections to British or Output Connector: 3 pin XLR male connector International sockets via supplied Output Level: Typically 0dBU for average line level cable kit. 2-Wire Off Hook Voltage: 6V minimum • Connection to the telephone set is 2 Wire Connectors: RJ11 socket - line maintained while the unit is in use. RJ11 socket - handset • Small, rugged extruded aluminium Front Panel Operational Controls case with XLR3 male 4-wire Line Connect: Push button with indicator connector. Ring LED: Indicates incoming ringing On LED: Indicates connection to the telephone line “ Equipment Type CM-TLL Line powered telephone line listen An audio interface to connect to unit Physical Specification direct analogue exchange lines and “ Dimensions: 77mm (W) x 83mm (D) x 42mm (H) receive calls with electrical isolation 3.0” (W) x 3.3” (D) x 1.7” (H) Weight: Nett: 0.20kg Gross: 0.70kg from the line. Front and rear view of the CM-TLL Nett: 0.50lbs Gross: 1.6lbs Studio Illuminated Signs New Remote Programming Controller New New Remote Programming Programming Controller Method Changes to The signs are preconfigured to display certain colours when the control inputs are active. Information on the colours shown SignalLED signs can be found on the Sonifex website. Prior to 1st December 2010, the display mode Programming Controller must be sold after 1st and colour options could then be varied using an 8 way DIPswitch, accessible used. This allows a much simpler way of programming any sign December 2010 during installation. From 1st December 2010, this is different - the signs are still using a simple hand-held remote control. Please note that the control is sold preconfigured, but to vary the colours separately and one control can program and switching modes, the LD-RPC Remote multiple signs. 10 Tel: +44 (0)1933 650 700 Fax: +44 (0)1933 650 726 Email: sales@sonifex.co.uk Internet: www.sonifex.co.uk
  • 11. PHONE IN 6 Radio Talkshow System Phone In 6 Radio Talkshow Telephone Switching System PHONE IN 6 PI-6R Remote Control Front Panel Talkshows have never been so easy Features List • Simple installation using CAT5 cabling for the The Phone In 6 is a telephone switching system for radio remote control panel. talkshows. It consists of a desktop Remote Control Panel for call • Automatic call answering. control, and a rackmount Base Console which contains all of the • Automatic call disconnection. • Self-op or call screening modes. audio and telephony connections, including two superb quality • Caller conferencing. digital telephone hybrids. Connected via ethernet, the units • Headset included with system. make up a simple, easy to use talkshow system. • Simple switch button control of callers. • Receive, route, drop or make calls. The Base Console can be loaded with 2, 4, or The Phone In 6 uses an echo-cancellation • 12 digit keypad to make calls, recall favourite 6 phone line modules, where each module DSP algorithm and impedance matching settings and for speed-dialling. can have 2 PSTN (normal telephone) lines or to give around 70dB cancellation, which • Two line LCD display. 1 ISDN BRI line. The ISDN basic rate interface provides excellent separation of caller & line • Phonebook for automatic dialling. allows 2 calls to be handled, 1 on each B send audio and elimination of feedback, • Responsive illuminated switch buttons. channel. The PSTN module has 2 interfaces distortion & echo on the incoming calls. • Programmable GPIO. each using a modern digital hybrid interface, This is close to being the best performance • Ethernet control/connectivity. which is settable by software to handle possible on a telephone line & uses • Two superb quality digital telephone hybrids. a variety of PSTN and PABX systems with the same enhanced echo cancellation • Modular PSTN & ISDN telephony inputs. varying impedances, call connection & algorithms as used on the DHY-03, the best • Hardware metering of send & receive levels. disconnection tones. performing telephone hybrid in the world. • Send & receive level adjustment. • Wide range of impedance matching options. • Music on hold input. • AGC, automatic gain control of send & receive signals. • Echo cancellation. PI-6C Base Console Front & Rear • Noise gate. • Automatic caller ducking. • Option for AES/EBU inputs & outputs. Tel: +44 (0)1933 650 700 Fax: +44 (0)1933 650 726 Email: sales@sonifex.co.uk Internet: www.sonifex.co.uk 11