Skip to main content
LI FI
A NEW GENERATION TECHNOLOGY
Guided by : Mr. Sarbeswara Hota.
(Assistant Professor,Dept. of CA ,iter)
Presented by : Vivekananda Sahoo.
(1461020014,4th sem,MCA ,iter)
2/7/2016 Li-Fi 1
CONTENTS :
• Introduction
• Present senario
• Working principle
• Construction
• Advantages
• Application area
• Limitation
• Conclussion
• References
2/7/2016 Li-Fi 2
INTRODUCTION :
What is LI-FI ?
 It is a “Wireless Optical Networking Technology”.
 As it uses light for transmission of data and the
operation of whole system is depends on precise
transmission of data through light.
 Therefore, this system is termed as “Li-Fi”.
 Professor Harald Haas(germany,University of
Edinburg) is the architect of Li-Fi system.
2/7/2016 Li-Fi 3
 Li-Fi technology uses visible light spectrum for
transmission of data.
 Due to use of Visible light spectrum Li-Fi system
has larger bandwidth as compared to other
systems.
 It is the fast and cheap Wireless communication
system which is optical version of Wi-Fi.
 The basic ideology behind this technology is that
the data can be transmitted through LED light
whose intensity varies even faster than the
human eye.
2/7/2016 Li-Fi 4
Present Scenario:
 Radio Spectrum is congested but the demand for
wireless data double each year.
At present we have as many as 1.5 million radio
wave base stations across the globe.
We also have close to 5 billion mobile connections
which transmit a data over 600TB.
Wireless communication has become an utility like
electricity and water.
1.4 BILLION
5 BILLION
ISSUES WITH RADIO WAVE :
• Capacity
• Efficiency
• Availability
• Security
“ SO WE HAVE TO THINK ABOUT AN ALTERNATIVE
WAY TO HANDEL THE CHALLENGE ”
2/7/2016 Li-Fi 6
Who can replace the radio
wave for wireless
communication ?
Solution is VLC (Visual Light
Communication)
2/7/2016 Li-Fi 7
WHY ONLY VLC ?
• electromagnetic spectrum :-
Gamma rays are simply dangerous
• X-rays are good in hospitals
• Ultra violet ray for our skin is dangerous
• Infrared rays are bad for our eyes
• So we are now left with Visible Rays.
2/7/2016 Li-Fi 8
How it works :
• In simple terms, Li-Fi can be thought of as a light-
based Wi-Fi. That is, it uses light instead of radio
waves to transmit information. And instead of Wi-
Fi modems, Li-Fi would use transceiver-fitted LED
lamps.
• The LEDs can be switched on and off very quickly,
which gives nice opportunities for transmitting
data.
• Operational procedure is very simple.
• Normal light power is replaced by LED light power.
2/7/2016 Li-Fi 9
• If LED is ON, digital data ‘1’ is transmitted & if
LED is OFF, digital data ‘0’ is transmitted.
• LEDs varies in intensity so fast that a human eye
cannot detect it.
• On one end all the data on the internet will be
streamed to a lamp driver when the led is turned
on the microchip converts the digital data in form
of light .
• A light sensitive device (photo detector) receives
the signal and converts it back into original data.
This method of using rapid pulses of light to
transmit information wirelessly is technically
referred as Visible Light Communication .
Operational diagram :
2/7/2016 Li-Fi 11
• Transmission side simply contains LED or
fluorescent lamp.
• Receiver end contains photo-diode & image sensor.
Construction :
 The LiFi product consists of 4 primary sub-
assemblies:
Bulb
RF Power Amplifier Circuit (PA)
Printed Circuit Board (PCB)
Enclosure
(Block diagram)
2/7/2016 Li-Fi 12
• The PCB controls the electrical inputs and
outputs of the lamp and houses the
microcontroller used to manage different lamp
functions.
• An RF (radio-frequency) signal is generated by
the solid-state PA and is guided into an electric
field about the bulb.
• The high concentration of energy in the electric
field vaporizes the contents of the bulb to a
plasma state at the bulb’s center; this controlled
plasma generates an intense source of light.
• All of these subassemblies are contained in an
aluminum enclosure.
2/7/2016 Li-Fi 13
ADVANTAGES:
• Larger bandwidth ( 10,000 times the radio
bandwidth ).
• High speed data rate .
• High efficiency .
• Highly secure.
• Works even under water in sea.
• Safe for health .
• More availability.
• Low cost solution.
2/7/2016 Li-Fi 14
APPLICATION AREAS :
• RF restricted environment – visible light is safe
enough that can be used in petrochemical
plants, nuclear power plants.
• Airways – The whole airways communication are
performed on the basis of radio waves.To
overcome this drawback lifi can be introduced.
2/7/2016 Li-Fi 15
• Hospital – The sensitive electronic equipment may
be interfered on the presence of radio frequency.
So here lifi can be used.
• Underwater – Lifi can even work under water
where wifi fails completely . It is an opportunity
for military , research, navigation system.
2/7/2016 Li-Fi 16
• In seminar hall :
• Street lamps as open hotspot :
2/7/2016 Li-Fi 17
LIMITATIONS :
• light cannot pass through opaque object or
obstacles.
• It can’t cover a large area as that of radio waves.
• There should be line of sight between sender and
receiver
• Initial setup cost.
2/7/2016 Li-Fi 18
CONCLUSION :
• Faster
• Smarter
• Cheaper and also
• Better
OR WE CAN SAY
• Cleaner, Greener, Safer and Brighter future.
2/7/2016 Li-Fi 19
REFERENCES :
• http://en.wikipedia.org/wiki/Li-Fi
• seminarprojects.com/s/seminar-report-on-Li-
Fi
• http://teleinfobd.blogspot.in/2012/01/what-
is-lifi.html
• www.lificonsortium.org
• the-gadgeteer.com/2011/08/LI-FI
2/7/2016 Li-Fi 20
2/7/2016 Li-Fi 21