SlideShare a Scribd company logo
MIME 2230-Workshop Technology
Chapter-1-Workshop Safety and Protective
Equipments
WORKSHOP-INTRODUCTION
Image source: https://commons.wikimedia.org/wiki/File:Engineering-Workshop-B.jpg
• We all know that increased efforts are being made towards mechanization and
automation to suffice the needs of evolving manufacturing environment.
• Despite of this, use of hand tools and conventional machine tools are still
essential to all young people who aspire to become mechanical or production
engineers.
• These engineers are advised to gain knowledge and experience by individually
operating the machines and using the tools skillfully as there is no real substitute
for practical experience.
• This course of workshop technology is focused mainly on metal cutting
operations.
WORKSHOP-INTRODUCTION
Image source: https://commons.wikimedia.org/wiki/File:Engineering-Workshop-B.jpg
• It takes few seconds to be safe! Safety means consideration of hazards that can
occur when a machine or its guard fails, or an operator chooses to do a job in a
different way.
• We must therefore understand and practice safe working procedure to avoid
accidents.
WORKSHOP-INTRODUCTION
Image source: https://commons.wikimedia.org/wiki/File:Engineering-Workshop-B.jpg
A Lab In charge is a responsibility for a safe and healthy working environment for the
workers.
We have to aware with the safety risks within the laboratory or the work places, as
well as the measures you can take to counteract these risks.
WORKSHOP-INTRODUCTION
Image source: https://commons.wikimedia.org/wiki/File:Engineering-Workshop-B.jpg
• PPE means personal protective equipment or equipment you use to guarantee your
(own) safety.
• Use PPE always and anywhere where necessary. Observe the instructions for use,
maintain them well and check regularly if they still offer sufficient protection. But
when do you use what type of protection?
WORKSHOP-INTRODUCTION
Image source: https://commons.wikimedia.org/wiki/File:Engineering-Workshop-B.jpg
• PPE means personal protective equipment or equipment you use to guarantee your
(own) safety.
• Use PPE always and anywhere where necessary. Observe the instructions for use,
maintain them well and check regularly if they still offer sufficient protection. But
when do you use what type of protection?
WORKSHOP-INTRODUCTION
• A room, group of rooms, or building in which work, especially mechanical
work, is carried on.
• Workshop is the core of learning about different Materials, equipment, tools
and manufacturing practices that are observed in different manufacturing
functions and operations.
Image source: https://commons.wikimedia.org/wiki/File:Engineering-Workshop-B.jpg
Workshop- Heavy Machines
Image source:https://www.aie.co.nz/heavy-machining
WORKSHOP / INDUSTRIAL SAFETY
Sl. No. Safety Do’s Safety Don’ts
1 Wear safety overall Don’t wear any loose clothes
2 Wear safety goggles Don’t walk inside the workshop
without safety goggles.
3 Wear safety shoes Don’t wear sandals in workshop
4 Wear safety gloves when required Don’t wear watches and jewelries
5 Plan well before you start Don’t run inside the workshop
6 If in doubt - Ask Don’t use wrong tool.
7 Adopt safe working procedures Don’t adopt your own methods.
8 Place things in proper place. Don’t mess up your workplace.
9 Always be alert and obey teachers Don’t day dream.
10 Keep your workplace neat and clean Don’t leave your workplace unclean.
11 Please work slowly and carefully Don’t be in hurry.
12 Clamp the work piece firmly Don’t use mobiles.
13 Always use proper tools Don’t use worn tools.
PROTECTIVE CLOTHING AND EQUIPMENT
Image source: https://commons.wikimedia.org/wiki/File:Engineering-Workshop-B.jpg
• It is essential that all employees adopt a positive attitude towards safety.
Protective clothing should be worn wherever necessary.
• Fig 1.1 shows satisfactory and unsatisfactory protective clothing. Eye protection
must also be worn when performing machining operations such as turning,
drilling, grinding. Use face shields in welding area. Safety boots should also be
used. Industrial gloves should be used while handling sharp objects.
Safety Procedures
PROTECTIVE CLOTHING AND EQUIPMENT
Image Source: R L., Basic Engineering Technology, First edition, Butterworth-Heinemann, 1995
PROTECTIVE CLOTHING AND EQUIPMENT
Image source: https://commons.wikimedia.org/wiki/File:Engineering-Workshop-B.jpg
Wearing a helmet offers protection and can prevent head injuries.
Select a sturdy helmet that is adapted to the working conditions.
These days you can find many elegant designs and you can choose
extra options such as an adjustable interior harness and comfortable
sweatbands.
The eyes are the most complex and fragile parts of our body. Each day,
more than 600 people worldwide sustain eye injuries during their
work.
Thanks to a good pair of safety glasses, these injuries could be
prevented.
Do you come into contact with bright light or infrared radiation?
Then welding goggles or a shield offer the ideal protection!
PROTECTIVE CLOTHING AND EQUIPMENT
Image source: https://commons.wikimedia.org/wiki/File:Engineering-Workshop-B.jpg
Do you work in an environment with high sound levels? In that
case it is very important to consider hearing protection.
Earplugs are very comfortable, but earmuffs are convenient on the
work floor as you can quickly put these on or take them off.
PROTECTIVE CLOTHING AND EQUIPMENT
Image source: https://commons.wikimedia.org/wiki/File:Engineering-Workshop-B.jpg
Hands and fingers are often injured, so it is vital to protect them
properly. Depending on the sector you work in, you can choose from
gloves for different applications:
•protection against vibrations
•protection against cuts by sharp materials
•protection against cold or heat
•protection against bacteriological risks
•protection against splashes from diluted chemicals.
PROTECTIVE CLOTHING AND EQUIPMENT
Image source: https://commons.wikimedia.org/wiki/File:Engineering-Workshop-B.jpg
• Even your feet need solid protection. Safety shoes (type Sb, S1, S2
or S3) and boots (type S4 or S5) are the ideal solution to protect the
feet against heavy weights.
• An antiskid sole is useful when working in a damp environment,
definitely if you know that 16,2% of all industrial accidents are
caused by tripping or sliding.
• On slippery surfaces, such as snow and ice, shoe claws are
recommended.
• Special socks can provide extra comfort.
PROTECTIVE CLOTHING AND EQUIPMENT
Image source: https://commons.wikimedia.org/wiki/File:Engineering-Workshop-B.jpg
• Wearing a mask at work is no luxury, definitely not when coming
into contact with hazardous materials.
• 15% of the employees within the EU inhale vapours, smoke,
powder or dusk while performing their job.
• Dust masks offer protection against fine dust and other
dangerous particles.
• If the materials are truly toxic, use a full-face mask.
• This adheres tightly to the face, to protect the nose and mouth
against harmful pollution.
PROTECTIVE CLOTHING AND EQUIPMENT
Image source: https://commons.wikimedia.org/wiki/File:Engineering-Workshop-B.jpg
• Preventing accidents is crucial in a crowded workshop.
• That is why a good visibility at work is a must: a high-
visibility jacket and pants made of a strong fabric can help
prevent accidents.
• Just like the hand protection, there are versions for different
applications.
PROTECTIVE CLOTHING
Image Source: R L., Basic Engineering Technology, First edition, Butterworth-Heinemann, 1995
GLOVES
Image Source: R L., Basic Engineering Technology, First edition, Butterworth-Heinemann, 1995
SAFETY HELMET
Image Source: R L., Basic Engineering Technology, First edition, Butterworth-Heinemann, 1995
SAFETY FOOT WEAR
Image Source: R L., Basic Engineering Technology, First edition, Butterworth-Heinemann, 1995
SAFETY GOGGLES
Image Source: R L., Basic Engineering Technology, First edition, Butterworth-Heinemann, 1995
RESPIRATOR
Image Source: R L., Basic Engineering Technology, First edition, Butterworth-Heinemann, 1995
ELECTRICAL HAZARDS
• Electrical equipment is potentially dangerous. The hazards associated
with it are:-
• Electric shock
• Fire due to overheating of cables, connections and appliances
Image Source: R L., Basic Engineering Technology, First edition, Butterworth-Heinemann, 1995
CAUSES OF ELECTRICAL HAZARDS
• These hazards can result from
• badly designed installations and equipment,
• inadequate maintenance,
• deliberates overloading of installations and equipment.
• Check that the cable is not damaged or frayed.
• Check that the cable is properly secured at both ends and that none of the
conductors is visible.
• Check that the plug is in good condition.
Personal Safety
References:
1. R L., Basic Engineering Technology, First edition, Butterworth-
Heinemann, 1995.
2. https://www.aie.co.nz/heavy-machining.
3. File:Engineering-Workshop-B.jpg - Wikimedia Commons.

More Related Content

Similar to Chapter-1 (5).pptx

Construction safety lecture-2
Construction safety  lecture-2Construction safety  lecture-2
Construction safety lecture-2
Saleem Malik
 
PPE training, developed 2014
PPE training, developed 2014PPE training, developed 2014
PPE training, developed 2014
Eric Waidelich
 
06 Safety and Health on Construction sites
06 Safety and Health on Construction sites06 Safety and Health on Construction sites
06 Safety and Health on Construction sites
akashpadole
 
OCCUPATIONAL HAZARD IDENTIFICATION AND RISK ASSESSMENT IN INDUSTRY
OCCUPATIONAL HAZARD IDENTIFICATION AND RISK ASSESSMENT IN INDUSTRYOCCUPATIONAL HAZARD IDENTIFICATION AND RISK ASSESSMENT IN INDUSTRY
OCCUPATIONAL HAZARD IDENTIFICATION AND RISK ASSESSMENT IN INDUSTRY
IRJET Journal
 
Safety practice ( SWEDISH COLLEGE OF ENGINEERING WAHCANTT)
Safety practice ( SWEDISH COLLEGE OF ENGINEERING WAHCANTT)Safety practice ( SWEDISH COLLEGE OF ENGINEERING WAHCANTT)
Safety practice ( SWEDISH COLLEGE OF ENGINEERING WAHCANTT)
Waqas Ahmad
 
2015 ISOSWO APWA Spring Conference: Review of PPE
2015 ISOSWO APWA Spring Conference: Review of PPE2015 ISOSWO APWA Spring Conference: Review of PPE
2015 ISOSWO APWA Spring Conference: Review of PPE
isoswo
 
Safety signs and symbols, PPEs, ILO, OSH
Safety signs and symbols, PPEs, ILO, OSHSafety signs and symbols, PPEs, ILO, OSH
Safety signs and symbols, PPEs, ILO, OSH
RevanuruSubramanyam
 
Lecture2-PPEandTools.ppt
Lecture2-PPEandTools.pptLecture2-PPEandTools.ppt
Lecture2-PPEandTools.ppt
Innocent Bhaikwa
 
construction safety.pptx
construction safety.pptxconstruction safety.pptx
construction safety.pptx
Marwa Merghani
 
Personal protective equipment
Personal protective equipmentPersonal protective equipment
Personal protective equipment
SibghatUllah50
 
Safety concerns in construction
Safety concerns in constructionSafety concerns in construction
Safety concerns in construction
nandhini manivannan
 
709PPE.ppt
709PPE.ppt709PPE.ppt
17._SGW-_Personal_Protective_Equipments_(PPEs).pptx
17._SGW-_Personal_Protective_Equipments_(PPEs).pptx17._SGW-_Personal_Protective_Equipments_(PPEs).pptx
17._SGW-_Personal_Protective_Equipments_(PPEs).pptx
safetygoodwe
 
Construction Safety Protocol PPT by Rajesh Prasad, ED RVNL at Lucknow on 26.0...
Construction Safety Protocol PPT by Rajesh Prasad, ED RVNL at Lucknow on 26.0...Construction Safety Protocol PPT by Rajesh Prasad, ED RVNL at Lucknow on 26.0...
Construction Safety Protocol PPT by Rajesh Prasad, ED RVNL at Lucknow on 26.0...
Rajesh Prasad
 
Safety in the Workplace
Safety in the WorkplaceSafety in the Workplace
Safety in the Workplace
Ryan Pratta, CAPM
 
Ppe group ii assignment
Ppe  group ii  assignment Ppe  group ii  assignment
Ppe group ii assignment
Manepalli Narasimha Murthy
 
PROTOCOL FOR SAFE EXECUTION OF INFRA PROJECTS BY RAJESH PRASAD ED RVNL DT 04...
PROTOCOL FOR SAFE EXECUTION OF INFRA PROJECTS  BY RAJESH PRASAD ED RVNL DT 04...PROTOCOL FOR SAFE EXECUTION OF INFRA PROJECTS  BY RAJESH PRASAD ED RVNL DT 04...
PROTOCOL FOR SAFE EXECUTION OF INFRA PROJECTS BY RAJESH PRASAD ED RVNL DT 04...
Rajesh Prasad
 
Industrial safety magazine
Industrial safety magazineIndustrial safety magazine
Industrial safety magazine
WMGS
 
PSC Workplace Safety Guidebook 2018
PSC Workplace Safety Guidebook 2018 PSC Workplace Safety Guidebook 2018
PSC Workplace Safety Guidebook 2018
Project Sales Corp
 
Factory security and safety convex mirrors in Kenya
Factory security and safety convex mirrors in Kenya Factory security and safety convex mirrors in Kenya
Factory security and safety convex mirrors in Kenya
easyLive Systems Ltd
 

Similar to Chapter-1 (5).pptx (20)

Construction safety lecture-2
Construction safety  lecture-2Construction safety  lecture-2
Construction safety lecture-2
 
PPE training, developed 2014
PPE training, developed 2014PPE training, developed 2014
PPE training, developed 2014
 
06 Safety and Health on Construction sites
06 Safety and Health on Construction sites06 Safety and Health on Construction sites
06 Safety and Health on Construction sites
 
OCCUPATIONAL HAZARD IDENTIFICATION AND RISK ASSESSMENT IN INDUSTRY
OCCUPATIONAL HAZARD IDENTIFICATION AND RISK ASSESSMENT IN INDUSTRYOCCUPATIONAL HAZARD IDENTIFICATION AND RISK ASSESSMENT IN INDUSTRY
OCCUPATIONAL HAZARD IDENTIFICATION AND RISK ASSESSMENT IN INDUSTRY
 
Safety practice ( SWEDISH COLLEGE OF ENGINEERING WAHCANTT)
Safety practice ( SWEDISH COLLEGE OF ENGINEERING WAHCANTT)Safety practice ( SWEDISH COLLEGE OF ENGINEERING WAHCANTT)
Safety practice ( SWEDISH COLLEGE OF ENGINEERING WAHCANTT)
 
2015 ISOSWO APWA Spring Conference: Review of PPE
2015 ISOSWO APWA Spring Conference: Review of PPE2015 ISOSWO APWA Spring Conference: Review of PPE
2015 ISOSWO APWA Spring Conference: Review of PPE
 
Safety signs and symbols, PPEs, ILO, OSH
Safety signs and symbols, PPEs, ILO, OSHSafety signs and symbols, PPEs, ILO, OSH
Safety signs and symbols, PPEs, ILO, OSH
 
Lecture2-PPEandTools.ppt
Lecture2-PPEandTools.pptLecture2-PPEandTools.ppt
Lecture2-PPEandTools.ppt
 
construction safety.pptx
construction safety.pptxconstruction safety.pptx
construction safety.pptx
 
Personal protective equipment
Personal protective equipmentPersonal protective equipment
Personal protective equipment
 
Safety concerns in construction
Safety concerns in constructionSafety concerns in construction
Safety concerns in construction
 
709PPE.ppt
709PPE.ppt709PPE.ppt
709PPE.ppt
 
17._SGW-_Personal_Protective_Equipments_(PPEs).pptx
17._SGW-_Personal_Protective_Equipments_(PPEs).pptx17._SGW-_Personal_Protective_Equipments_(PPEs).pptx
17._SGW-_Personal_Protective_Equipments_(PPEs).pptx
 
Construction Safety Protocol PPT by Rajesh Prasad, ED RVNL at Lucknow on 26.0...
Construction Safety Protocol PPT by Rajesh Prasad, ED RVNL at Lucknow on 26.0...Construction Safety Protocol PPT by Rajesh Prasad, ED RVNL at Lucknow on 26.0...
Construction Safety Protocol PPT by Rajesh Prasad, ED RVNL at Lucknow on 26.0...
 
Safety in the Workplace
Safety in the WorkplaceSafety in the Workplace
Safety in the Workplace
 
Ppe group ii assignment
Ppe  group ii  assignment Ppe  group ii  assignment
Ppe group ii assignment
 
PROTOCOL FOR SAFE EXECUTION OF INFRA PROJECTS BY RAJESH PRASAD ED RVNL DT 04...
PROTOCOL FOR SAFE EXECUTION OF INFRA PROJECTS  BY RAJESH PRASAD ED RVNL DT 04...PROTOCOL FOR SAFE EXECUTION OF INFRA PROJECTS  BY RAJESH PRASAD ED RVNL DT 04...
PROTOCOL FOR SAFE EXECUTION OF INFRA PROJECTS BY RAJESH PRASAD ED RVNL DT 04...
 
Industrial safety magazine
Industrial safety magazineIndustrial safety magazine
Industrial safety magazine
 
PSC Workplace Safety Guidebook 2018
PSC Workplace Safety Guidebook 2018 PSC Workplace Safety Guidebook 2018
PSC Workplace Safety Guidebook 2018
 
Factory security and safety convex mirrors in Kenya
Factory security and safety convex mirrors in Kenya Factory security and safety convex mirrors in Kenya
Factory security and safety convex mirrors in Kenya
 

More from JanakiRaman206018

ResourseTimetableReport (16).pdf
ResourseTimetableReport (16).pdfResourseTimetableReport (16).pdf
ResourseTimetableReport (16).pdf
JanakiRaman206018
 
Chapter 4 CASTING.ppt
Chapter 4 CASTING.pptChapter 4 CASTING.ppt
Chapter 4 CASTING.ppt
JanakiRaman206018
 
chapter-6.ppt
chapter-6.pptchapter-6.ppt
chapter-6.ppt
JanakiRaman206018
 
chapter-7.ppt
chapter-7.pptchapter-7.ppt
chapter-7.ppt
JanakiRaman206018
 
Organic Coating.pptx
Organic Coating.pptxOrganic Coating.pptx
Organic Coating.pptx
JanakiRaman206018
 
Solartracking-review.pdf
Solartracking-review.pdfSolartracking-review.pdf
Solartracking-review.pdf
JanakiRaman206018
 
Projection-of-Point-and-lines-engineering108.com (1).ppt
Projection-of-Point-and-lines-engineering108.com (1).pptProjection-of-Point-and-lines-engineering108.com (1).ppt
Projection-of-Point-and-lines-engineering108.com (1).ppt
JanakiRaman206018
 

More from JanakiRaman206018 (7)

ResourseTimetableReport (16).pdf
ResourseTimetableReport (16).pdfResourseTimetableReport (16).pdf
ResourseTimetableReport (16).pdf
 
Chapter 4 CASTING.ppt
Chapter 4 CASTING.pptChapter 4 CASTING.ppt
Chapter 4 CASTING.ppt
 
chapter-6.ppt
chapter-6.pptchapter-6.ppt
chapter-6.ppt
 
chapter-7.ppt
chapter-7.pptchapter-7.ppt
chapter-7.ppt
 
Organic Coating.pptx
Organic Coating.pptxOrganic Coating.pptx
Organic Coating.pptx
 
Solartracking-review.pdf
Solartracking-review.pdfSolartracking-review.pdf
Solartracking-review.pdf
 
Projection-of-Point-and-lines-engineering108.com (1).ppt
Projection-of-Point-and-lines-engineering108.com (1).pptProjection-of-Point-and-lines-engineering108.com (1).ppt
Projection-of-Point-and-lines-engineering108.com (1).ppt
 

Recently uploaded

Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
IJECEIAES
 
Understanding Inductive Bias in Machine Learning
Understanding Inductive Bias in Machine LearningUnderstanding Inductive Bias in Machine Learning
Understanding Inductive Bias in Machine Learning
SUTEJAS
 
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
ML Based Model for NIDS MSc Updated Presentation.v2.pptxML Based Model for NIDS MSc Updated Presentation.v2.pptx
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
JamalHussainArman
 
ACEP Magazine edition 4th launched on 05.06.2024
ACEP Magazine edition 4th launched on 05.06.2024ACEP Magazine edition 4th launched on 05.06.2024
ACEP Magazine edition 4th launched on 05.06.2024
Rahul
 
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student MemberIEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
VICTOR MAESTRE RAMIREZ
 
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
Yasser Mahgoub
 
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.pptUnit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
KrishnaveniKrishnara1
 
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMSA SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
IJNSA Journal
 
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball playEric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
enizeyimana36
 
A review on techniques and modelling methodologies used for checking electrom...
A review on techniques and modelling methodologies used for checking electrom...A review on techniques and modelling methodologies used for checking electrom...
A review on techniques and modelling methodologies used for checking electrom...
nooriasukmaningtyas
 
Computational Engineering IITH Presentation
Computational Engineering IITH PresentationComputational Engineering IITH Presentation
Computational Engineering IITH Presentation
co23btech11018
 
22CYT12-Unit-V-E Waste and its Management.ppt
22CYT12-Unit-V-E Waste and its Management.ppt22CYT12-Unit-V-E Waste and its Management.ppt
22CYT12-Unit-V-E Waste and its Management.ppt
KrishnaveniKrishnara1
 
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of contentGenerative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
Hitesh Mohapatra
 
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
bijceesjournal
 
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
IJECEIAES
 
Casting-Defect-inSlab continuous casting.pdf
Casting-Defect-inSlab continuous casting.pdfCasting-Defect-inSlab continuous casting.pdf
Casting-Defect-inSlab continuous casting.pdf
zubairahmad848137
 
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning an...International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
gerogepatton
 
CSM Cloud Service Management Presentarion
CSM Cloud Service Management PresentarionCSM Cloud Service Management Presentarion
CSM Cloud Service Management Presentarion
rpskprasana
 
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODELDEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
gerogepatton
 
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
学校原版美国波士顿大学毕业证学历学位证书原版一模一样学校原版美国波士顿大学毕业证学历学位证书原版一模一样
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
171ticu
 

Recently uploaded (20)

Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
 
Understanding Inductive Bias in Machine Learning
Understanding Inductive Bias in Machine LearningUnderstanding Inductive Bias in Machine Learning
Understanding Inductive Bias in Machine Learning
 
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
ML Based Model for NIDS MSc Updated Presentation.v2.pptxML Based Model for NIDS MSc Updated Presentation.v2.pptx
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
 
ACEP Magazine edition 4th launched on 05.06.2024
ACEP Magazine edition 4th launched on 05.06.2024ACEP Magazine edition 4th launched on 05.06.2024
ACEP Magazine edition 4th launched on 05.06.2024
 
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student MemberIEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
 
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
 
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.pptUnit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
 
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMSA SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
 
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball playEric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
 
A review on techniques and modelling methodologies used for checking electrom...
A review on techniques and modelling methodologies used for checking electrom...A review on techniques and modelling methodologies used for checking electrom...
A review on techniques and modelling methodologies used for checking electrom...
 
Computational Engineering IITH Presentation
Computational Engineering IITH PresentationComputational Engineering IITH Presentation
Computational Engineering IITH Presentation
 
22CYT12-Unit-V-E Waste and its Management.ppt
22CYT12-Unit-V-E Waste and its Management.ppt22CYT12-Unit-V-E Waste and its Management.ppt
22CYT12-Unit-V-E Waste and its Management.ppt
 
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of contentGenerative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
 
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
 
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
 
Casting-Defect-inSlab continuous casting.pdf
Casting-Defect-inSlab continuous casting.pdfCasting-Defect-inSlab continuous casting.pdf
Casting-Defect-inSlab continuous casting.pdf
 
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning an...International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
 
CSM Cloud Service Management Presentarion
CSM Cloud Service Management PresentarionCSM Cloud Service Management Presentarion
CSM Cloud Service Management Presentarion
 
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODELDEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
 
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
学校原版美国波士顿大学毕业证学历学位证书原版一模一样学校原版美国波士顿大学毕业证学历学位证书原版一模一样
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
 

Chapter-1 (5).pptx

  • 1. MIME 2230-Workshop Technology Chapter-1-Workshop Safety and Protective Equipments
  • 2. WORKSHOP-INTRODUCTION Image source: https://commons.wikimedia.org/wiki/File:Engineering-Workshop-B.jpg • We all know that increased efforts are being made towards mechanization and automation to suffice the needs of evolving manufacturing environment. • Despite of this, use of hand tools and conventional machine tools are still essential to all young people who aspire to become mechanical or production engineers. • These engineers are advised to gain knowledge and experience by individually operating the machines and using the tools skillfully as there is no real substitute for practical experience. • This course of workshop technology is focused mainly on metal cutting operations.
  • 3. WORKSHOP-INTRODUCTION Image source: https://commons.wikimedia.org/wiki/File:Engineering-Workshop-B.jpg • It takes few seconds to be safe! Safety means consideration of hazards that can occur when a machine or its guard fails, or an operator chooses to do a job in a different way. • We must therefore understand and practice safe working procedure to avoid accidents.
  • 4. WORKSHOP-INTRODUCTION Image source: https://commons.wikimedia.org/wiki/File:Engineering-Workshop-B.jpg A Lab In charge is a responsibility for a safe and healthy working environment for the workers. We have to aware with the safety risks within the laboratory or the work places, as well as the measures you can take to counteract these risks.
  • 5. WORKSHOP-INTRODUCTION Image source: https://commons.wikimedia.org/wiki/File:Engineering-Workshop-B.jpg • PPE means personal protective equipment or equipment you use to guarantee your (own) safety. • Use PPE always and anywhere where necessary. Observe the instructions for use, maintain them well and check regularly if they still offer sufficient protection. But when do you use what type of protection?
  • 6. WORKSHOP-INTRODUCTION Image source: https://commons.wikimedia.org/wiki/File:Engineering-Workshop-B.jpg • PPE means personal protective equipment or equipment you use to guarantee your (own) safety. • Use PPE always and anywhere where necessary. Observe the instructions for use, maintain them well and check regularly if they still offer sufficient protection. But when do you use what type of protection?
  • 7. WORKSHOP-INTRODUCTION • A room, group of rooms, or building in which work, especially mechanical work, is carried on. • Workshop is the core of learning about different Materials, equipment, tools and manufacturing practices that are observed in different manufacturing functions and operations. Image source: https://commons.wikimedia.org/wiki/File:Engineering-Workshop-B.jpg
  • 8. Workshop- Heavy Machines Image source:https://www.aie.co.nz/heavy-machining
  • 9. WORKSHOP / INDUSTRIAL SAFETY Sl. No. Safety Do’s Safety Don’ts 1 Wear safety overall Don’t wear any loose clothes 2 Wear safety goggles Don’t walk inside the workshop without safety goggles. 3 Wear safety shoes Don’t wear sandals in workshop 4 Wear safety gloves when required Don’t wear watches and jewelries 5 Plan well before you start Don’t run inside the workshop 6 If in doubt - Ask Don’t use wrong tool. 7 Adopt safe working procedures Don’t adopt your own methods. 8 Place things in proper place. Don’t mess up your workplace. 9 Always be alert and obey teachers Don’t day dream. 10 Keep your workplace neat and clean Don’t leave your workplace unclean. 11 Please work slowly and carefully Don’t be in hurry. 12 Clamp the work piece firmly Don’t use mobiles. 13 Always use proper tools Don’t use worn tools.
  • 10. PROTECTIVE CLOTHING AND EQUIPMENT Image source: https://commons.wikimedia.org/wiki/File:Engineering-Workshop-B.jpg • It is essential that all employees adopt a positive attitude towards safety. Protective clothing should be worn wherever necessary. • Fig 1.1 shows satisfactory and unsatisfactory protective clothing. Eye protection must also be worn when performing machining operations such as turning, drilling, grinding. Use face shields in welding area. Safety boots should also be used. Industrial gloves should be used while handling sharp objects.
  • 11. Safety Procedures PROTECTIVE CLOTHING AND EQUIPMENT Image Source: R L., Basic Engineering Technology, First edition, Butterworth-Heinemann, 1995
  • 12. PROTECTIVE CLOTHING AND EQUIPMENT Image source: https://commons.wikimedia.org/wiki/File:Engineering-Workshop-B.jpg Wearing a helmet offers protection and can prevent head injuries. Select a sturdy helmet that is adapted to the working conditions. These days you can find many elegant designs and you can choose extra options such as an adjustable interior harness and comfortable sweatbands. The eyes are the most complex and fragile parts of our body. Each day, more than 600 people worldwide sustain eye injuries during their work. Thanks to a good pair of safety glasses, these injuries could be prevented. Do you come into contact with bright light or infrared radiation? Then welding goggles or a shield offer the ideal protection!
  • 13. PROTECTIVE CLOTHING AND EQUIPMENT Image source: https://commons.wikimedia.org/wiki/File:Engineering-Workshop-B.jpg Do you work in an environment with high sound levels? In that case it is very important to consider hearing protection. Earplugs are very comfortable, but earmuffs are convenient on the work floor as you can quickly put these on or take them off.
  • 14. PROTECTIVE CLOTHING AND EQUIPMENT Image source: https://commons.wikimedia.org/wiki/File:Engineering-Workshop-B.jpg Hands and fingers are often injured, so it is vital to protect them properly. Depending on the sector you work in, you can choose from gloves for different applications: •protection against vibrations •protection against cuts by sharp materials •protection against cold or heat •protection against bacteriological risks •protection against splashes from diluted chemicals.
  • 15. PROTECTIVE CLOTHING AND EQUIPMENT Image source: https://commons.wikimedia.org/wiki/File:Engineering-Workshop-B.jpg • Even your feet need solid protection. Safety shoes (type Sb, S1, S2 or S3) and boots (type S4 or S5) are the ideal solution to protect the feet against heavy weights. • An antiskid sole is useful when working in a damp environment, definitely if you know that 16,2% of all industrial accidents are caused by tripping or sliding. • On slippery surfaces, such as snow and ice, shoe claws are recommended. • Special socks can provide extra comfort.
  • 16. PROTECTIVE CLOTHING AND EQUIPMENT Image source: https://commons.wikimedia.org/wiki/File:Engineering-Workshop-B.jpg • Wearing a mask at work is no luxury, definitely not when coming into contact with hazardous materials. • 15% of the employees within the EU inhale vapours, smoke, powder or dusk while performing their job. • Dust masks offer protection against fine dust and other dangerous particles. • If the materials are truly toxic, use a full-face mask. • This adheres tightly to the face, to protect the nose and mouth against harmful pollution.
  • 17. PROTECTIVE CLOTHING AND EQUIPMENT Image source: https://commons.wikimedia.org/wiki/File:Engineering-Workshop-B.jpg • Preventing accidents is crucial in a crowded workshop. • That is why a good visibility at work is a must: a high- visibility jacket and pants made of a strong fabric can help prevent accidents. • Just like the hand protection, there are versions for different applications.
  • 18. PROTECTIVE CLOTHING Image Source: R L., Basic Engineering Technology, First edition, Butterworth-Heinemann, 1995
  • 19. GLOVES Image Source: R L., Basic Engineering Technology, First edition, Butterworth-Heinemann, 1995
  • 20. SAFETY HELMET Image Source: R L., Basic Engineering Technology, First edition, Butterworth-Heinemann, 1995
  • 21. SAFETY FOOT WEAR Image Source: R L., Basic Engineering Technology, First edition, Butterworth-Heinemann, 1995
  • 22. SAFETY GOGGLES Image Source: R L., Basic Engineering Technology, First edition, Butterworth-Heinemann, 1995
  • 23. RESPIRATOR Image Source: R L., Basic Engineering Technology, First edition, Butterworth-Heinemann, 1995
  • 24. ELECTRICAL HAZARDS • Electrical equipment is potentially dangerous. The hazards associated with it are:- • Electric shock • Fire due to overheating of cables, connections and appliances Image Source: R L., Basic Engineering Technology, First edition, Butterworth-Heinemann, 1995
  • 25. CAUSES OF ELECTRICAL HAZARDS • These hazards can result from • badly designed installations and equipment, • inadequate maintenance, • deliberates overloading of installations and equipment.
  • 26. • Check that the cable is not damaged or frayed. • Check that the cable is properly secured at both ends and that none of the conductors is visible. • Check that the plug is in good condition. Personal Safety
  • 27. References: 1. R L., Basic Engineering Technology, First edition, Butterworth- Heinemann, 1995. 2. https://www.aie.co.nz/heavy-machining. 3. File:Engineering-Workshop-B.jpg - Wikimedia Commons.