SlideShare a Scribd company logo
Service Repair Manual
Models
120H Motor Grader
Shutdown SIS
Previous Screen
Product: MOTOR GRADER
Model: 120H MOTOR GRADER 5FM
Configuration: 120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine
Disassembly and Assembly
446 and 446B Backhoe Loaders, Lexion 450 Combine, 3114 and 3116 Engines,
IT18F Integrated Toolcarrier, D6M Track-Type Tractor and 928F, 950F and 950G
Wheel Loaders
Media Number -SENR3611-18 Publication Date -01/05/2009 Date Updated -27/05/2009
i01930426
Camshaft - Remove
SMCS - 1210-011
Removal Procedure
Start By:
a. Remove the governor. Refer to Disassembly and Assembly, "Governor - Remove".
b. Remove the side covers. Refer to Disassembly and Assembly, "Lifter Group - Remove and
Install".
c. Remove the front cover. Refer to Disassembly and Assembly, "Front Cover - Remove".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
1/3
120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP...
2020/3/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
Note: For information on reusability of the camshaft, refer to Guideline For Reusable Parts And
Salvage Operations, SEBF8097, "Camshaft Measurement", Guideline For Reusable Parts And
Salvage Operations, SEBF8146, "Visual Inspection of Camshafts", and Guideline For Reusable
Parts And Salvage Operations, SEBF8251, "Specifications for Measurement of Camshafts in
3114/3116 Engines". For information on reusability of the camshaft gear, refer to Guideline For
Reusable Parts And Salvage Operations, SEBF8045, "Timing Gears for All Engines".
Note: The air compressor was removed in order to accommodate the engine repair stand.
Note: It is not necessary to remove the cylinder head for removal of the camshaft.
1. Turn the crankshaft to top center compression stroke for the No. 1 piston. Install the timing
bolt in the flywheel. This is for timing during installation.
Illustration 1 g01007643
Typical example
2. Ensure that timing mark (1) on the camshaft gear is aligned with timing mark (2) on the
idler gear.
2/3
120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP...
2020/3/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
Illustration 2 g01007645
3. Remove bolts (4) and camshaft retainer plate (6).
4. Remove camshaft gear (5) and camshaft (3) from the cylinder block.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Mar 6 19:58:06 UTC+0800 2020
3/3
120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP...
2020/3/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
Shutdown SIS
Previous Screen
Product: MOTOR GRADER
Model: 120H MOTOR GRADER 5FM
Configuration: 120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine
Disassembly and Assembly
446 and 446B Backhoe Loaders, Lexion 450 Combine, 3114 and 3116 Engines,
IT18F Integrated Toolcarrier, D6M Track-Type Tractor and 928F, 950F and 950G
Wheel Loaders
Media Number -SENR3611-18 Publication Date -01/05/2009 Date Updated -27/05/2009
i01936378
Camshaft - Install
SMCS - 1210-012
Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Note: For information on reusability of the camshaft, refer to Guideline For Reusable Parts And
Salvage Operations, SEBF8097, "Camshaft Measurement", Guideline For Reusable Parts And
Salvage Operations, SEBF8146, "Visual Inspection of Camshafts", and Guideline For Reusable
Parts And Salvage Operations, SEBF8251, "Specifications for Measurement of Camshafts in
3114/3116 Engines". For information on reusability of the camshaft gear, refer to Guideline For
Reusable Parts And Salvage Operations, SEBF8045, "Timing Gears for All Engines".
1. Lubricate the camshaft and the camshaft bearings with clean engine oil.
1/3
120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP...
2020/3/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
Illustration 1 g01007645
2. Carefully install camshaft (3) and camshaft gear (5) in the engine.
NOTICE
When installing the camshaft, make sure the number one cylinder is at
top center of the compression stroke with the timing bolt installed in
the flywheel. The camshaft timing is very important. The timing mark
on the camshaft drive gear must line up with the timing mark on the
idler gear. Refer to the Specifications Manual for more information.
Illustration 2 g01007643
Typical example
3. Ensure that timing mark (1) on the camshaft gear is aligned with timing mark (2) on the
idler gear.
2/3
120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP...
2020/3/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
4. Install camshaft retainer plate (6) and bolts (4).
End By:
a. Install the front cover. Refer to Disassembly and Assembly, "Front Cover - Install".
b. Install the side cover. Refer to Disassembly and Assembly, "Lifter Group - Remove and
Install".
c. Install the governor. Refer to Disassembly and Assembly, "Governor - Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Mar 6 19:59:02 UTC+0800 2020
3/3
120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP...
2020/3/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
Shutdown SIS
Previous Screen
Product: MOTOR GRADER
Model: 120H MOTOR GRADER 5FM
Configuration: 120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine
Disassembly and Assembly
446 and 446B Backhoe Loaders, Lexion 450 Combine, 3114 and 3116 Engines,
IT18F Integrated Toolcarrier, D6M Track-Type Tractor and 928F, 950F and 950G
Wheel Loaders
Media Number -SENR3611-18 Publication Date -01/05/2009 Date Updated -27/05/2009
i01171077
Camshaft Gear - Remove and Install
SMCS - 1210-010-GE
Removal Procedure
Start By:
a. Remove the camshaft. Refer to Disassembly and Assembly, "Camshaft - Remove".
Note: For information on reusability of the camshaft gear, refer to Guideline For Reusable Parts
And Salvage Operations, SEBF8045, "Timing Gears for All Engines".
1. Wrap the camshaft with a protective covering in order to prevent damage to the camshaft.
Illustration 1 g00611152
NOTICE
1/2
120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP...
2020/3/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
Do not allow the camshaft to fall to the floor when pressing it from the
drive gear. Also make sure that the camshaft lobes do not catch on the
press plates.
2. Place the camshaft and camshaft gear (1) in a suitable press. Press the camshaft from
camshaft gear (1).
Installation Procedure
Note: For information on reusability of the camshaft gear, refer to Guideline For Reusable Parts
And Salvage Operations, SEBF8045, "Timing Gears for All Engines".
Illustration 2 g00611152
1. Heat the camshaft gear to a maximum temperature of 315 °C (600 °F).
2. Align the key in the camshaft with the groove (keyway) in the camshaft gear.
3. Install the camshaft gear on the end of the camshaft.
End By:
a. Install the camshaft. Refer to Disassembly and Assembly, "Camshaft - Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Mar 6 19:59:58 UTC+0800 2020
2/2
120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP...
2020/3/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
Shutdown SIS
Previous Screen
Product: MOTOR GRADER
Model: 120H MOTOR GRADER 5FM
Configuration: 120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine
Disassembly and Assembly
446 and 446B Backhoe Loaders, Lexion 450 Combine, 3114 and 3116 Engines,
IT18F Integrated Toolcarrier, D6M Track-Type Tractor and 928F, 950F and 950G
Wheel Loaders
Media Number -SENR3611-18 Publication Date -01/05/2009 Date Updated -27/05/2009
i02183087
Camshaft Bearings - Remove and Install
SMCS - 1211-010
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8S-2241 Camshaft Bearing Tool Group 1
Start By:
a. Remove the camshaft. Refer to Disassembly and Assembly, "Camshaft - Remove".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
1/4
120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP...
2020/3/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
Note: Note the oil hole orientation in each camshaft bearing prior to removal for assembly
purposes.
1. Use Tooling (A) to remove the camshaft bearings from the cylinder block.
Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 8S-2241 Camshaft Bearing Tool Group 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
2/4
120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP...
2020/3/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
Illustration 1 g01104577
3/4
120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP...
2020/3/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
Illustration 2 g01104579
1. Use Tooling (A) to install all of the camshaft bearings except for the front bearing. Orient
oil hole (1) in each bearing so that oil hole (1) is located at the top of the bore.
2. Use Tooling (A) to install the front camshaft bearing. Align oil hole (1) in the front
camshaft bearing with the oil hole in the cylinder block. Locate joint (2) in the front
camshaft bearing in the proper position.
End By:
a. Install the camshaft. Refer to Disassembly and Assembly, "Camshaft - Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Mar 6 20:00:53 UTC+0800 2020
4/4
120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP...
2020/3/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
Shutdown SIS
Previous Screen
Product: MOTOR GRADER
Model: 120H MOTOR GRADER 5FM
Configuration: 120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine
Disassembly and Assembly
446 and 446B Backhoe Loaders, Lexion 450 Combine, 3114 and 3116 Engines,
IT18F Integrated Toolcarrier, D6M Track-Type Tractor and 928F, 950F and 950G
Wheel Loaders
Media Number -SENR3611-18 Publication Date -01/05/2009 Date Updated -27/05/2009
i01572486
Engine Oil Pan - Remove and Install
SMCS - 1302-010
Removal Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
1/3
120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP...
2020/3/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
Illustration 1 g00596538
Note: Drain engine oil into a suitable container for disposal.
1. Remove bolts (1) and the washers that hold engine oil pan (2) to the cylinder block.
2. Remove engine oil pan (2) and the gasket. Use a rubber mallet to tap lightly on engine oil
pan (2) if it is necessary.
Note: Do not pry on the engine oil pan.
Installation Procedure
1. Clean the mating surfaces of the engine oil pan and the cylinder block.
Note: Do not put liquid gasket material on the oil pan gasket or on the gasket surface of the
engine oil pan.
2. Put the gasket and the engine oil pan (2) in position on the cylinder block. Install bolts (1)
and washers.
2/3
120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP...
2020/3/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
Illustration 2 g00596576
Typical drawing (6 cylinder engine)
3. Tighten four bolts (3). Start with bolt (4) and tighten the remaining bolts in a
counterclockwise sequence.
4. Tighten bolts to a torque of 31 ± 3 N·m (23 ± 2 lb ft).
5. Fill the crankcase with engine oil to the proper level. Refer to Operation and Maintenance
Manual, "Refill Capacities".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Mar 6 20:01:49 UTC+0800 2020
3/3
120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP...
2020/3/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
Shutdown SIS
Previous Screen
Product: MOTOR GRADER
Model: 120H MOTOR GRADER 5FM
Configuration: 120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine
Disassembly and Assembly
446 and 446B Backhoe Loaders, Lexion 450 Combine, 3114 and 3116 Engines,
IT18F Integrated Toolcarrier, D6M Track-Type Tractor and 928F, 950F and 950G
Wheel Loaders
Media Number -SENR3611-18 Publication Date -01/05/2009 Date Updated -27/05/2009
i01930590
Engine Balancer Shaft - Remove and Install
SMCS - 1220-010-JF
Removal Procedure
Start By:
a. Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove
and Install".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
1/3
120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP...
2020/3/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
Dispose of all fluids according to local regulations and mandates.
Note: The Balancer shafts are used on the 3114 Engines.
Illustration 1 g00596194
314 engine
1. Remove oil tube assembly (1).
2. Remove bolts (2) and the washers that hold the balancer group in position.
3. Remove the balancer group and the engine oil pump as a unit.
Installation Procedure
Illustration 2 g00596364
2/3
120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP...
2020/3/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1. Turn the engine in the counterclockwise direction and place the number one piston at the
top center (TC) of the compression stroke. Install the timing bolt in the flywheel housing.
2. Align the timing marks on the balancer gears (3) with oil holes (4) in the engine oil pump.
Position the balancer group in the cylinder block. Install the washers and bolts (2).
Illustration 3 g00596194
3. Check the condition of the O-ring seals in oil tube assembly (1). Replace the O-ring seal, if
necessary.
4. Remove the timing bolt from the flywheel housing.
End By:
a. Install the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove
and Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Mar 6 20:02:45 UTC+0800 2020
3/3
120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP...
2020/3/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
Shutdown SIS
Previous Screen
Product: MOTOR GRADER
Model: 120H MOTOR GRADER 5FM
Configuration: 120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine
Disassembly and Assembly
446 and 446B Backhoe Loaders, Lexion 450 Combine, 3114 and 3116 Engines,
IT18F Integrated Toolcarrier, D6M Track-Type Tractor and 928F, 950F and 950G
Wheel Loaders
Media Number -SENR3611-18 Publication Date -01/05/2009 Date Updated -27/05/2009
i01411264
Piston Cooling Jets - Remove and Install
SMCS - 1331-010
Removal Procedure
Start By:
a. Remove the engine balancer shaft on the 3114 engines only. Refer to Disassembly and
Assembly, "Engine Balancer Shaft - Remove and Install".
b. Remove the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump -
Remove".
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
1/3
120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP...
2020/3/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
Illustration 1 g00642470
1. Remove bolt (1) and piston cooling jet (2).
2. Remove the remainder of the piston cooling jets.
Installation Procedure
Illustration 2 g00642470
NOTICE
2/3
120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP...
2020/3/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
Ensure that the piston cooling jet is seated properly prior to tightening
the bolt.
1. Position piston cooling jet (2) in the cylinder block.
2. Ensure that the piston cooling jet is seated properly and install bolt (1) that holds the piston
cooling jet in position.
NOTICE
Hold piston cooling jet in position when the mounting bolt is tightened.
If the cooling tube is not held in position, the cooling tube may bend or
the cooling tube may break.
3. Install the remainder of the piston cooling jets.
End By:
a. Install the engine balancer shaft on the 3114 engine. Refer to Disassembly and Assembly, "
Engine Balancer Shaft - Remove and Install".
b. Install the oil pump. Refer to Disassembly and Assembly, " Engine Oil Pump - Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Mar 6 20:03:41 UTC+0800 2020
3/3
120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP...
2020/3/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...

More Related Content

Similar to Caterpillar Cat 120H Motor Grader (Prefix 5FM) Service Repair Manual (5FM00001 and up).pdf

Caterpillar Cat 918F WHEEL LOADER (Prefix 3TJ) Service Repair Manual Instant ...
Caterpillar Cat 918F WHEEL LOADER (Prefix 3TJ) Service Repair Manual Instant ...Caterpillar Cat 918F WHEEL LOADER (Prefix 3TJ) Service Repair Manual Instant ...
Caterpillar Cat 918F WHEEL LOADER (Prefix 3TJ) Service Repair Manual Instant ...
gua6982552kun
 
Caterpillar cat 938 f wheel loader (prefix 1km) service repair manual (1km000...
Caterpillar cat 938 f wheel loader (prefix 1km) service repair manual (1km000...Caterpillar cat 938 f wheel loader (prefix 1km) service repair manual (1km000...
Caterpillar cat 938 f wheel loader (prefix 1km) service repair manual (1km000...
hhfjksekmm
 
Caterpillar cat 938 f wheel loader (prefix 1km) service repair manual (1km000...
Caterpillar cat 938 f wheel loader (prefix 1km) service repair manual (1km000...Caterpillar cat 938 f wheel loader (prefix 1km) service repair manual (1km000...
Caterpillar cat 938 f wheel loader (prefix 1km) service repair manual (1km000...
fjjskqazxedmmem
 
Caterpillar Cat 938F Wheel Loader (Prefix 1KM) Service Repair Manual Instant ...
Caterpillar Cat 938F Wheel Loader (Prefix 1KM) Service Repair Manual Instant ...Caterpillar Cat 938F Wheel Loader (Prefix 1KM) Service Repair Manual Instant ...
Caterpillar Cat 938F Wheel Loader (Prefix 1KM) Service Repair Manual Instant ...
fijsekkdmdm2w
 
Caterpillar Cat 938F Wheel Loader (Prefix 1KM) Service Repair Manual (1KM0000...
Caterpillar Cat 938F Wheel Loader (Prefix 1KM) Service Repair Manual (1KM0000...Caterpillar Cat 938F Wheel Loader (Prefix 1KM) Service Repair Manual (1KM0000...
Caterpillar Cat 938F Wheel Loader (Prefix 1KM) Service Repair Manual (1KM0000...
jdkskmmdmd1
 
Caterpillar cat 938 f wheel loader (prefix 1km) service repair manual (1km000...
Caterpillar cat 938 f wheel loader (prefix 1km) service repair manual (1km000...Caterpillar cat 938 f wheel loader (prefix 1km) service repair manual (1km000...
Caterpillar cat 938 f wheel loader (prefix 1km) service repair manual (1km000...
ifkkdkmdmd
 
Caterpillar Cat 938F Wheel Loader (Prefix 1KM) Service Repair Manual Instant ...
Caterpillar Cat 938F Wheel Loader (Prefix 1KM) Service Repair Manual Instant ...Caterpillar Cat 938F Wheel Loader (Prefix 1KM) Service Repair Manual Instant ...
Caterpillar Cat 938F Wheel Loader (Prefix 1KM) Service Repair Manual Instant ...
ze3xiandiao
 
Caterpillar Cat 938F Wheel Loader (Prefix 1KM) Service Repair Manual Instant ...
Caterpillar Cat 938F Wheel Loader (Prefix 1KM) Service Repair Manual Instant ...Caterpillar Cat 938F Wheel Loader (Prefix 1KM) Service Repair Manual Instant ...
Caterpillar Cat 938F Wheel Loader (Prefix 1KM) Service Repair Manual Instant ...
onyvzcwadtu05
 

Similar to Caterpillar Cat 120H Motor Grader (Prefix 5FM) Service Repair Manual (5FM00001 and up).pdf (8)

Caterpillar Cat 918F WHEEL LOADER (Prefix 3TJ) Service Repair Manual Instant ...
Caterpillar Cat 918F WHEEL LOADER (Prefix 3TJ) Service Repair Manual Instant ...Caterpillar Cat 918F WHEEL LOADER (Prefix 3TJ) Service Repair Manual Instant ...
Caterpillar Cat 918F WHEEL LOADER (Prefix 3TJ) Service Repair Manual Instant ...
 
Caterpillar cat 938 f wheel loader (prefix 1km) service repair manual (1km000...
Caterpillar cat 938 f wheel loader (prefix 1km) service repair manual (1km000...Caterpillar cat 938 f wheel loader (prefix 1km) service repair manual (1km000...
Caterpillar cat 938 f wheel loader (prefix 1km) service repair manual (1km000...
 
Caterpillar cat 938 f wheel loader (prefix 1km) service repair manual (1km000...
Caterpillar cat 938 f wheel loader (prefix 1km) service repair manual (1km000...Caterpillar cat 938 f wheel loader (prefix 1km) service repair manual (1km000...
Caterpillar cat 938 f wheel loader (prefix 1km) service repair manual (1km000...
 
Caterpillar Cat 938F Wheel Loader (Prefix 1KM) Service Repair Manual Instant ...
Caterpillar Cat 938F Wheel Loader (Prefix 1KM) Service Repair Manual Instant ...Caterpillar Cat 938F Wheel Loader (Prefix 1KM) Service Repair Manual Instant ...
Caterpillar Cat 938F Wheel Loader (Prefix 1KM) Service Repair Manual Instant ...
 
Caterpillar Cat 938F Wheel Loader (Prefix 1KM) Service Repair Manual (1KM0000...
Caterpillar Cat 938F Wheel Loader (Prefix 1KM) Service Repair Manual (1KM0000...Caterpillar Cat 938F Wheel Loader (Prefix 1KM) Service Repair Manual (1KM0000...
Caterpillar Cat 938F Wheel Loader (Prefix 1KM) Service Repair Manual (1KM0000...
 
Caterpillar cat 938 f wheel loader (prefix 1km) service repair manual (1km000...
Caterpillar cat 938 f wheel loader (prefix 1km) service repair manual (1km000...Caterpillar cat 938 f wheel loader (prefix 1km) service repair manual (1km000...
Caterpillar cat 938 f wheel loader (prefix 1km) service repair manual (1km000...
 
Caterpillar Cat 938F Wheel Loader (Prefix 1KM) Service Repair Manual Instant ...
Caterpillar Cat 938F Wheel Loader (Prefix 1KM) Service Repair Manual Instant ...Caterpillar Cat 938F Wheel Loader (Prefix 1KM) Service Repair Manual Instant ...
Caterpillar Cat 938F Wheel Loader (Prefix 1KM) Service Repair Manual Instant ...
 
Caterpillar Cat 938F Wheel Loader (Prefix 1KM) Service Repair Manual Instant ...
Caterpillar Cat 938F Wheel Loader (Prefix 1KM) Service Repair Manual Instant ...Caterpillar Cat 938F Wheel Loader (Prefix 1KM) Service Repair Manual Instant ...
Caterpillar Cat 938F Wheel Loader (Prefix 1KM) Service Repair Manual Instant ...
 

More from rong74gou

Caterpillar Cat M318D Wheeled Excavator (Prefix P8L) Service Repair Manual (P...
Caterpillar Cat M318D Wheeled Excavator (Prefix P8L) Service Repair Manual (P...Caterpillar Cat M318D Wheeled Excavator (Prefix P8L) Service Repair Manual (P...
Caterpillar Cat M318D Wheeled Excavator (Prefix P8L) Service Repair Manual (P...
rong74gou
 
Caterpillar Cat 966H Wheel Loader (Prefix A6D) Service Repair Manual (A6D0000...
Caterpillar Cat 966H Wheel Loader (Prefix A6D) Service Repair Manual (A6D0000...Caterpillar Cat 966H Wheel Loader (Prefix A6D) Service Repair Manual (A6D0000...
Caterpillar Cat 966H Wheel Loader (Prefix A6D) Service Repair Manual (A6D0000...
rong74gou
 
Caterpillar Cat 938G WHEEL LOADER (Prefix 9HS) Service Repair Manual (9HS0000...
Caterpillar Cat 938G WHEEL LOADER (Prefix 9HS) Service Repair Manual (9HS0000...Caterpillar Cat 938G WHEEL LOADER (Prefix 9HS) Service Repair Manual (9HS0000...
Caterpillar Cat 938G WHEEL LOADER (Prefix 9HS) Service Repair Manual (9HS0000...
rong74gou
 
Caterpillar Cat 730C2 Articulated Truck (Prefix 2T4) Service Repair Manual (2...
Caterpillar Cat 730C2 Articulated Truck (Prefix 2T4) Service Repair Manual (2...Caterpillar Cat 730C2 Articulated Truck (Prefix 2T4) Service Repair Manual (2...
Caterpillar Cat 730C2 Articulated Truck (Prefix 2T4) Service Repair Manual (2...
rong74gou
 
Caterpillar Cat 730 Articulated Truck (Prefix 3T3) Service Repair Manual (3T3...
Caterpillar Cat 730 Articulated Truck (Prefix 3T3) Service Repair Manual (3T3...Caterpillar Cat 730 Articulated Truck (Prefix 3T3) Service Repair Manual (3T3...
Caterpillar Cat 730 Articulated Truck (Prefix 3T3) Service Repair Manual (3T3...
rong74gou
 
Caterpillar Cat 442D Backhoe Loader (Prefix BRG) Service Repair Manual (BRG00...
Caterpillar Cat 442D Backhoe Loader (Prefix BRG) Service Repair Manual (BRG00...Caterpillar Cat 442D Backhoe Loader (Prefix BRG) Service Repair Manual (BRG00...
Caterpillar Cat 442D Backhoe Loader (Prefix BRG) Service Repair Manual (BRG00...
rong74gou
 
Caterpillar Cat 436B BACKHOE LOADER (Prefix 6MJ) Service Repair Manual (6MJ00...
Caterpillar Cat 436B BACKHOE LOADER (Prefix 6MJ) Service Repair Manual (6MJ00...Caterpillar Cat 436B BACKHOE LOADER (Prefix 6MJ) Service Repair Manual (6MJ00...
Caterpillar Cat 436B BACKHOE LOADER (Prefix 6MJ) Service Repair Manual (6MJ00...
rong74gou
 
Caterpillar Cat 430F2 Backhoe Loader (Prefix LYD) Service Repair Manual (LYD0...
Caterpillar Cat 430F2 Backhoe Loader (Prefix LYD) Service Repair Manual (LYD0...Caterpillar Cat 430F2 Backhoe Loader (Prefix LYD) Service Repair Manual (LYD0...
Caterpillar Cat 430F2 Backhoe Loader (Prefix LYD) Service Repair Manual (LYD0...
rong74gou
 
Caterpillar Cat 430F2 Backhoe Loader (Prefix HWG) Service Repair Manual (HWG0...
Caterpillar Cat 430F2 Backhoe Loader (Prefix HWG) Service Repair Manual (HWG0...Caterpillar Cat 430F2 Backhoe Loader (Prefix HWG) Service Repair Manual (HWG0...
Caterpillar Cat 430F2 Backhoe Loader (Prefix HWG) Service Repair Manual (HWG0...
rong74gou
 
Caterpillar Cat 430F Backhoe Loader (Prefix RGS) Service Repair Manual (RGS00...
Caterpillar Cat 430F Backhoe Loader (Prefix RGS) Service Repair Manual (RGS00...Caterpillar Cat 430F Backhoe Loader (Prefix RGS) Service Repair Manual (RGS00...
Caterpillar Cat 430F Backhoe Loader (Prefix RGS) Service Repair Manual (RGS00...
rong74gou
 
Caterpillar Cat 430F Backhoe Loader (Prefix RDF) Service Repair Manual (RDF00...
Caterpillar Cat 430F Backhoe Loader (Prefix RDF) Service Repair Manual (RDF00...Caterpillar Cat 430F Backhoe Loader (Prefix RDF) Service Repair Manual (RDF00...
Caterpillar Cat 430F Backhoe Loader (Prefix RDF) Service Repair Manual (RDF00...
rong74gou
 
Caterpillar Cat 430F Backhoe Loader (Prefix LNH) Service Repair Manual (LNH00...
Caterpillar Cat 430F Backhoe Loader (Prefix LNH) Service Repair Manual (LNH00...Caterpillar Cat 430F Backhoe Loader (Prefix LNH) Service Repair Manual (LNH00...
Caterpillar Cat 430F Backhoe Loader (Prefix LNH) Service Repair Manual (LNH00...
rong74gou
 
Caterpillar Cat 426C Backhoe Loader (Prefix 1NR) Service Repair Manual (1NR01...
Caterpillar Cat 426C Backhoe Loader (Prefix 1NR) Service Repair Manual (1NR01...Caterpillar Cat 426C Backhoe Loader (Prefix 1NR) Service Repair Manual (1NR01...
Caterpillar Cat 426C Backhoe Loader (Prefix 1NR) Service Repair Manual (1NR01...
rong74gou
 
Caterpillar Cat 426C Backhoe Loader (Prefix 1ER) Service Repair Manual (1ER00...
Caterpillar Cat 426C Backhoe Loader (Prefix 1ER) Service Repair Manual (1ER00...Caterpillar Cat 426C Backhoe Loader (Prefix 1ER) Service Repair Manual (1ER00...
Caterpillar Cat 426C Backhoe Loader (Prefix 1ER) Service Repair Manual (1ER00...
rong74gou
 
Caterpillar Cat 420F2 BACKHOE LOADER (Prefix NSB) Service Repair Manual (NSB0...
Caterpillar Cat 420F2 BACKHOE LOADER (Prefix NSB) Service Repair Manual (NSB0...Caterpillar Cat 420F2 BACKHOE LOADER (Prefix NSB) Service Repair Manual (NSB0...
Caterpillar Cat 420F2 BACKHOE LOADER (Prefix NSB) Service Repair Manual (NSB0...
rong74gou
 
Caterpillar Cat 420F2 Backhoe Loader (Prefix LYC) Service Repair Manual (LYC0...
Caterpillar Cat 420F2 Backhoe Loader (Prefix LYC) Service Repair Manual (LYC0...Caterpillar Cat 420F2 Backhoe Loader (Prefix LYC) Service Repair Manual (LYC0...
Caterpillar Cat 420F2 Backhoe Loader (Prefix LYC) Service Repair Manual (LYC0...
rong74gou
 
Caterpillar Cat 420F2 Backhoe Loader (Prefix LBS) Service Repair Manual (LBS0...
Caterpillar Cat 420F2 Backhoe Loader (Prefix LBS) Service Repair Manual (LBS0...Caterpillar Cat 420F2 Backhoe Loader (Prefix LBS) Service Repair Manual (LBS0...
Caterpillar Cat 420F2 Backhoe Loader (Prefix LBS) Service Repair Manual (LBS0...
rong74gou
 
Caterpillar Cat 320D2 L Excavator (Prefix YBK) Service Repair Manual (YBK0000...
Caterpillar Cat 320D2 L Excavator (Prefix YBK) Service Repair Manual (YBK0000...Caterpillar Cat 320D2 L Excavator (Prefix YBK) Service Repair Manual (YBK0000...
Caterpillar Cat 320D2 L Excavator (Prefix YBK) Service Repair Manual (YBK0000...
rong74gou
 
Caterpillar Cat 320D2 Excavator (Prefix YBK) Service Repair Manual (YBK00001 ...
Caterpillar Cat 320D2 Excavator (Prefix YBK) Service Repair Manual (YBK00001 ...Caterpillar Cat 320D2 Excavator (Prefix YBK) Service Repair Manual (YBK00001 ...
Caterpillar Cat 320D2 Excavator (Prefix YBK) Service Repair Manual (YBK00001 ...
rong74gou
 
Caterpillar Cat 305.5E Mini Hydraulic Excavator (Prefix MX5) Service Repair M...
Caterpillar Cat 305.5E Mini Hydraulic Excavator (Prefix MX5) Service Repair M...Caterpillar Cat 305.5E Mini Hydraulic Excavator (Prefix MX5) Service Repair M...
Caterpillar Cat 305.5E Mini Hydraulic Excavator (Prefix MX5) Service Repair M...
rong74gou
 

More from rong74gou (20)

Caterpillar Cat M318D Wheeled Excavator (Prefix P8L) Service Repair Manual (P...
Caterpillar Cat M318D Wheeled Excavator (Prefix P8L) Service Repair Manual (P...Caterpillar Cat M318D Wheeled Excavator (Prefix P8L) Service Repair Manual (P...
Caterpillar Cat M318D Wheeled Excavator (Prefix P8L) Service Repair Manual (P...
 
Caterpillar Cat 966H Wheel Loader (Prefix A6D) Service Repair Manual (A6D0000...
Caterpillar Cat 966H Wheel Loader (Prefix A6D) Service Repair Manual (A6D0000...Caterpillar Cat 966H Wheel Loader (Prefix A6D) Service Repair Manual (A6D0000...
Caterpillar Cat 966H Wheel Loader (Prefix A6D) Service Repair Manual (A6D0000...
 
Caterpillar Cat 938G WHEEL LOADER (Prefix 9HS) Service Repair Manual (9HS0000...
Caterpillar Cat 938G WHEEL LOADER (Prefix 9HS) Service Repair Manual (9HS0000...Caterpillar Cat 938G WHEEL LOADER (Prefix 9HS) Service Repair Manual (9HS0000...
Caterpillar Cat 938G WHEEL LOADER (Prefix 9HS) Service Repair Manual (9HS0000...
 
Caterpillar Cat 730C2 Articulated Truck (Prefix 2T4) Service Repair Manual (2...
Caterpillar Cat 730C2 Articulated Truck (Prefix 2T4) Service Repair Manual (2...Caterpillar Cat 730C2 Articulated Truck (Prefix 2T4) Service Repair Manual (2...
Caterpillar Cat 730C2 Articulated Truck (Prefix 2T4) Service Repair Manual (2...
 
Caterpillar Cat 730 Articulated Truck (Prefix 3T3) Service Repair Manual (3T3...
Caterpillar Cat 730 Articulated Truck (Prefix 3T3) Service Repair Manual (3T3...Caterpillar Cat 730 Articulated Truck (Prefix 3T3) Service Repair Manual (3T3...
Caterpillar Cat 730 Articulated Truck (Prefix 3T3) Service Repair Manual (3T3...
 
Caterpillar Cat 442D Backhoe Loader (Prefix BRG) Service Repair Manual (BRG00...
Caterpillar Cat 442D Backhoe Loader (Prefix BRG) Service Repair Manual (BRG00...Caterpillar Cat 442D Backhoe Loader (Prefix BRG) Service Repair Manual (BRG00...
Caterpillar Cat 442D Backhoe Loader (Prefix BRG) Service Repair Manual (BRG00...
 
Caterpillar Cat 436B BACKHOE LOADER (Prefix 6MJ) Service Repair Manual (6MJ00...
Caterpillar Cat 436B BACKHOE LOADER (Prefix 6MJ) Service Repair Manual (6MJ00...Caterpillar Cat 436B BACKHOE LOADER (Prefix 6MJ) Service Repair Manual (6MJ00...
Caterpillar Cat 436B BACKHOE LOADER (Prefix 6MJ) Service Repair Manual (6MJ00...
 
Caterpillar Cat 430F2 Backhoe Loader (Prefix LYD) Service Repair Manual (LYD0...
Caterpillar Cat 430F2 Backhoe Loader (Prefix LYD) Service Repair Manual (LYD0...Caterpillar Cat 430F2 Backhoe Loader (Prefix LYD) Service Repair Manual (LYD0...
Caterpillar Cat 430F2 Backhoe Loader (Prefix LYD) Service Repair Manual (LYD0...
 
Caterpillar Cat 430F2 Backhoe Loader (Prefix HWG) Service Repair Manual (HWG0...
Caterpillar Cat 430F2 Backhoe Loader (Prefix HWG) Service Repair Manual (HWG0...Caterpillar Cat 430F2 Backhoe Loader (Prefix HWG) Service Repair Manual (HWG0...
Caterpillar Cat 430F2 Backhoe Loader (Prefix HWG) Service Repair Manual (HWG0...
 
Caterpillar Cat 430F Backhoe Loader (Prefix RGS) Service Repair Manual (RGS00...
Caterpillar Cat 430F Backhoe Loader (Prefix RGS) Service Repair Manual (RGS00...Caterpillar Cat 430F Backhoe Loader (Prefix RGS) Service Repair Manual (RGS00...
Caterpillar Cat 430F Backhoe Loader (Prefix RGS) Service Repair Manual (RGS00...
 
Caterpillar Cat 430F Backhoe Loader (Prefix RDF) Service Repair Manual (RDF00...
Caterpillar Cat 430F Backhoe Loader (Prefix RDF) Service Repair Manual (RDF00...Caterpillar Cat 430F Backhoe Loader (Prefix RDF) Service Repair Manual (RDF00...
Caterpillar Cat 430F Backhoe Loader (Prefix RDF) Service Repair Manual (RDF00...
 
Caterpillar Cat 430F Backhoe Loader (Prefix LNH) Service Repair Manual (LNH00...
Caterpillar Cat 430F Backhoe Loader (Prefix LNH) Service Repair Manual (LNH00...Caterpillar Cat 430F Backhoe Loader (Prefix LNH) Service Repair Manual (LNH00...
Caterpillar Cat 430F Backhoe Loader (Prefix LNH) Service Repair Manual (LNH00...
 
Caterpillar Cat 426C Backhoe Loader (Prefix 1NR) Service Repair Manual (1NR01...
Caterpillar Cat 426C Backhoe Loader (Prefix 1NR) Service Repair Manual (1NR01...Caterpillar Cat 426C Backhoe Loader (Prefix 1NR) Service Repair Manual (1NR01...
Caterpillar Cat 426C Backhoe Loader (Prefix 1NR) Service Repair Manual (1NR01...
 
Caterpillar Cat 426C Backhoe Loader (Prefix 1ER) Service Repair Manual (1ER00...
Caterpillar Cat 426C Backhoe Loader (Prefix 1ER) Service Repair Manual (1ER00...Caterpillar Cat 426C Backhoe Loader (Prefix 1ER) Service Repair Manual (1ER00...
Caterpillar Cat 426C Backhoe Loader (Prefix 1ER) Service Repair Manual (1ER00...
 
Caterpillar Cat 420F2 BACKHOE LOADER (Prefix NSB) Service Repair Manual (NSB0...
Caterpillar Cat 420F2 BACKHOE LOADER (Prefix NSB) Service Repair Manual (NSB0...Caterpillar Cat 420F2 BACKHOE LOADER (Prefix NSB) Service Repair Manual (NSB0...
Caterpillar Cat 420F2 BACKHOE LOADER (Prefix NSB) Service Repair Manual (NSB0...
 
Caterpillar Cat 420F2 Backhoe Loader (Prefix LYC) Service Repair Manual (LYC0...
Caterpillar Cat 420F2 Backhoe Loader (Prefix LYC) Service Repair Manual (LYC0...Caterpillar Cat 420F2 Backhoe Loader (Prefix LYC) Service Repair Manual (LYC0...
Caterpillar Cat 420F2 Backhoe Loader (Prefix LYC) Service Repair Manual (LYC0...
 
Caterpillar Cat 420F2 Backhoe Loader (Prefix LBS) Service Repair Manual (LBS0...
Caterpillar Cat 420F2 Backhoe Loader (Prefix LBS) Service Repair Manual (LBS0...Caterpillar Cat 420F2 Backhoe Loader (Prefix LBS) Service Repair Manual (LBS0...
Caterpillar Cat 420F2 Backhoe Loader (Prefix LBS) Service Repair Manual (LBS0...
 
Caterpillar Cat 320D2 L Excavator (Prefix YBK) Service Repair Manual (YBK0000...
Caterpillar Cat 320D2 L Excavator (Prefix YBK) Service Repair Manual (YBK0000...Caterpillar Cat 320D2 L Excavator (Prefix YBK) Service Repair Manual (YBK0000...
Caterpillar Cat 320D2 L Excavator (Prefix YBK) Service Repair Manual (YBK0000...
 
Caterpillar Cat 320D2 Excavator (Prefix YBK) Service Repair Manual (YBK00001 ...
Caterpillar Cat 320D2 Excavator (Prefix YBK) Service Repair Manual (YBK00001 ...Caterpillar Cat 320D2 Excavator (Prefix YBK) Service Repair Manual (YBK00001 ...
Caterpillar Cat 320D2 Excavator (Prefix YBK) Service Repair Manual (YBK00001 ...
 
Caterpillar Cat 305.5E Mini Hydraulic Excavator (Prefix MX5) Service Repair M...
Caterpillar Cat 305.5E Mini Hydraulic Excavator (Prefix MX5) Service Repair M...Caterpillar Cat 305.5E Mini Hydraulic Excavator (Prefix MX5) Service Repair M...
Caterpillar Cat 305.5E Mini Hydraulic Excavator (Prefix MX5) Service Repair M...
 

Recently uploaded

Volvo L60f Wheel Loader Service Repair Manual
Volvo L60f Wheel Loader Service Repair ManualVolvo L60f Wheel Loader Service Repair Manual
Volvo L60f Wheel Loader Service Repair Manual
Excavator
 
Preventing and Addressing Oil Leaks in Your Mercedes A Comprehensive Service ...
Preventing and Addressing Oil Leaks in Your Mercedes A Comprehensive Service ...Preventing and Addressing Oil Leaks in Your Mercedes A Comprehensive Service ...
Preventing and Addressing Oil Leaks in Your Mercedes A Comprehensive Service ...
Momentum Motorworks
 
Why Isn't Your Sprinter Van Accelerating Properly
Why Isn't Your Sprinter Van Accelerating ProperlyWhy Isn't Your Sprinter Van Accelerating Properly
Why Isn't Your Sprinter Van Accelerating Properly
Sprinter Gurus
 
Busty Girls Call Delhi 🛵🚡9711199171 💃 Choose Best And Top Girl Service And No...
Busty Girls Call Delhi 🛵🚡9711199171 💃 Choose Best And Top Girl Service And No...Busty Girls Call Delhi 🛵🚡9711199171 💃 Choose Best And Top Girl Service And No...
Busty Girls Call Delhi 🛵🚡9711199171 💃 Choose Best And Top Girl Service And No...
kimmi singla$A17
 
Volvo L120C Wheel Loader Service Repair Manual
Volvo L120C Wheel Loader Service Repair ManualVolvo L120C Wheel Loader Service Repair Manual
Volvo L120C Wheel Loader Service Repair Manual
Excavator
 
UiPath Automotive PPT explaining about auto AWS.pptx
UiPath Automotive PPT explaining about auto AWS.pptxUiPath Automotive PPT explaining about auto AWS.pptx
UiPath Automotive PPT explaining about auto AWS.pptx
kalolo8435
 
L90f Volvo Loader Service Repairs Manual
L90f Volvo Loader Service Repairs ManualL90f Volvo Loader Service Repairs Manual
L90f Volvo Loader Service Repairs Manual
Excavator
 
Female Girls Call Delhi 🛵🚡9711199171 💃 Choose Best And Top Girl Service And N...
Female Girls Call Delhi 🛵🚡9711199171 💃 Choose Best And Top Girl Service And N...Female Girls Call Delhi 🛵🚡9711199171 💃 Choose Best And Top Girl Service And N...
Female Girls Call Delhi 🛵🚡9711199171 💃 Choose Best And Top Girl Service And N...
kimmi singla$A17
 
Exclusive Girls Call Delhi 🛵🚡9711199171 💃 Choose Best And Top Girl Service An...
Exclusive Girls Call Delhi 🛵🚡9711199171 💃 Choose Best And Top Girl Service An...Exclusive Girls Call Delhi 🛵🚡9711199171 💃 Choose Best And Top Girl Service An...
Exclusive Girls Call Delhi 🛵🚡9711199171 💃 Choose Best And Top Girl Service An...
kimmi singla$A17
 
Aftermarket Engine Parts Manufacturer in India
Aftermarket Engine Parts Manufacturer in IndiaAftermarket Engine Parts Manufacturer in India
Aftermarket Engine Parts Manufacturer in India
AECO Engineering LLP
 
Air Hostess Girls Call Mumbai 9910780858 Provide Best And Top Girl Service An...
Air Hostess Girls Call Mumbai 9910780858 Provide Best And Top Girl Service An...Air Hostess Girls Call Mumbai 9910780858 Provide Best And Top Girl Service An...
Air Hostess Girls Call Mumbai 9910780858 Provide Best And Top Girl Service An...
rhiannateal
 
Girls Call Ahemdabad 000XX00000 Provide Best And Top Girl Service And No1 in ...
Girls Call Ahemdabad 000XX00000 Provide Best And Top Girl Service And No1 in ...Girls Call Ahemdabad 000XX00000 Provide Best And Top Girl Service And No1 in ...
Girls Call Ahemdabad 000XX00000 Provide Best And Top Girl Service And No1 in ...
solankikamal004
 
Celebrity Girls Call Delhi 🎈🔥9711199171 🔥💋🎈 Provide Best And Top Girl Service...
Celebrity Girls Call Delhi 🎈🔥9711199171 🔥💋🎈 Provide Best And Top Girl Service...Celebrity Girls Call Delhi 🎈🔥9711199171 🔥💋🎈 Provide Best And Top Girl Service...
Celebrity Girls Call Delhi 🎈🔥9711199171 🔥💋🎈 Provide Best And Top Girl Service...
tanupasswan6
 
VVIP Girls Call Guwahati 000XX00000 Provide Best And Top Girl Service And No1...
VVIP Girls Call Guwahati 000XX00000 Provide Best And Top Girl Service And No1...VVIP Girls Call Guwahati 000XX00000 Provide Best And Top Girl Service And No1...
VVIP Girls Call Guwahati 000XX00000 Provide Best And Top Girl Service And No1...
gargshuriti
 
Exclusive Girls Call Mumbai 9910780858 Provide Best And Top Girl Service And ...
Exclusive Girls Call Mumbai 9910780858 Provide Best And Top Girl Service And ...Exclusive Girls Call Mumbai 9910780858 Provide Best And Top Girl Service And ...
Exclusive Girls Call Mumbai 9910780858 Provide Best And Top Girl Service And ...
jealousviolet
 
Aluminium-Scaffold-Towers-Industrial-Tower-instruction-manual.pdf
Aluminium-Scaffold-Towers-Industrial-Tower-instruction-manual.pdfAluminium-Scaffold-Towers-Industrial-Tower-instruction-manual.pdf
Aluminium-Scaffold-Towers-Industrial-Tower-instruction-manual.pdf
Haider723497
 
Comprehensive Guide to Hyundai Verna: Price, Features and tips for buying
Comprehensive Guide to Hyundai Verna: Price, Features and tips for buyingComprehensive Guide to Hyundai Verna: Price, Features and tips for buying
Comprehensive Guide to Hyundai Verna: Price, Features and tips for buying
Hans Hyundai Showroom
 
Girls Call Kolkata 000XX00000 Provide Best And Top Girl Service And No1 in City
Girls Call Kolkata 000XX00000 Provide Best And Top Girl Service And No1 in CityGirls Call Kolkata 000XX00000 Provide Best And Top Girl Service And No1 in City
Girls Call Kolkata 000XX00000 Provide Best And Top Girl Service And No1 in City
dalmeetsingh09090
 
What Causes Audi Car Battery Failures Solutions and Maintenance Tips
What Causes Audi Car Battery Failures Solutions and Maintenance TipsWhat Causes Audi Car Battery Failures Solutions and Maintenance Tips
What Causes Audi Car Battery Failures Solutions and Maintenance Tips
Woodinville Sports Cars
 
Girls Call Versova 9910780858 Provide Best And Top Girl Service And No1 in City
Girls Call Versova 9910780858 Provide Best And Top Girl Service And No1 in CityGirls Call Versova 9910780858 Provide Best And Top Girl Service And No1 in City
Girls Call Versova 9910780858 Provide Best And Top Girl Service And No1 in City
maigasapphire
 

Recently uploaded (20)

Volvo L60f Wheel Loader Service Repair Manual
Volvo L60f Wheel Loader Service Repair ManualVolvo L60f Wheel Loader Service Repair Manual
Volvo L60f Wheel Loader Service Repair Manual
 
Preventing and Addressing Oil Leaks in Your Mercedes A Comprehensive Service ...
Preventing and Addressing Oil Leaks in Your Mercedes A Comprehensive Service ...Preventing and Addressing Oil Leaks in Your Mercedes A Comprehensive Service ...
Preventing and Addressing Oil Leaks in Your Mercedes A Comprehensive Service ...
 
Why Isn't Your Sprinter Van Accelerating Properly
Why Isn't Your Sprinter Van Accelerating ProperlyWhy Isn't Your Sprinter Van Accelerating Properly
Why Isn't Your Sprinter Van Accelerating Properly
 
Busty Girls Call Delhi 🛵🚡9711199171 💃 Choose Best And Top Girl Service And No...
Busty Girls Call Delhi 🛵🚡9711199171 💃 Choose Best And Top Girl Service And No...Busty Girls Call Delhi 🛵🚡9711199171 💃 Choose Best And Top Girl Service And No...
Busty Girls Call Delhi 🛵🚡9711199171 💃 Choose Best And Top Girl Service And No...
 
Volvo L120C Wheel Loader Service Repair Manual
Volvo L120C Wheel Loader Service Repair ManualVolvo L120C Wheel Loader Service Repair Manual
Volvo L120C Wheel Loader Service Repair Manual
 
UiPath Automotive PPT explaining about auto AWS.pptx
UiPath Automotive PPT explaining about auto AWS.pptxUiPath Automotive PPT explaining about auto AWS.pptx
UiPath Automotive PPT explaining about auto AWS.pptx
 
L90f Volvo Loader Service Repairs Manual
L90f Volvo Loader Service Repairs ManualL90f Volvo Loader Service Repairs Manual
L90f Volvo Loader Service Repairs Manual
 
Female Girls Call Delhi 🛵🚡9711199171 💃 Choose Best And Top Girl Service And N...
Female Girls Call Delhi 🛵🚡9711199171 💃 Choose Best And Top Girl Service And N...Female Girls Call Delhi 🛵🚡9711199171 💃 Choose Best And Top Girl Service And N...
Female Girls Call Delhi 🛵🚡9711199171 💃 Choose Best And Top Girl Service And N...
 
Exclusive Girls Call Delhi 🛵🚡9711199171 💃 Choose Best And Top Girl Service An...
Exclusive Girls Call Delhi 🛵🚡9711199171 💃 Choose Best And Top Girl Service An...Exclusive Girls Call Delhi 🛵🚡9711199171 💃 Choose Best And Top Girl Service An...
Exclusive Girls Call Delhi 🛵🚡9711199171 💃 Choose Best And Top Girl Service An...
 
Aftermarket Engine Parts Manufacturer in India
Aftermarket Engine Parts Manufacturer in IndiaAftermarket Engine Parts Manufacturer in India
Aftermarket Engine Parts Manufacturer in India
 
Air Hostess Girls Call Mumbai 9910780858 Provide Best And Top Girl Service An...
Air Hostess Girls Call Mumbai 9910780858 Provide Best And Top Girl Service An...Air Hostess Girls Call Mumbai 9910780858 Provide Best And Top Girl Service An...
Air Hostess Girls Call Mumbai 9910780858 Provide Best And Top Girl Service An...
 
Girls Call Ahemdabad 000XX00000 Provide Best And Top Girl Service And No1 in ...
Girls Call Ahemdabad 000XX00000 Provide Best And Top Girl Service And No1 in ...Girls Call Ahemdabad 000XX00000 Provide Best And Top Girl Service And No1 in ...
Girls Call Ahemdabad 000XX00000 Provide Best And Top Girl Service And No1 in ...
 
Celebrity Girls Call Delhi 🎈🔥9711199171 🔥💋🎈 Provide Best And Top Girl Service...
Celebrity Girls Call Delhi 🎈🔥9711199171 🔥💋🎈 Provide Best And Top Girl Service...Celebrity Girls Call Delhi 🎈🔥9711199171 🔥💋🎈 Provide Best And Top Girl Service...
Celebrity Girls Call Delhi 🎈🔥9711199171 🔥💋🎈 Provide Best And Top Girl Service...
 
VVIP Girls Call Guwahati 000XX00000 Provide Best And Top Girl Service And No1...
VVIP Girls Call Guwahati 000XX00000 Provide Best And Top Girl Service And No1...VVIP Girls Call Guwahati 000XX00000 Provide Best And Top Girl Service And No1...
VVIP Girls Call Guwahati 000XX00000 Provide Best And Top Girl Service And No1...
 
Exclusive Girls Call Mumbai 9910780858 Provide Best And Top Girl Service And ...
Exclusive Girls Call Mumbai 9910780858 Provide Best And Top Girl Service And ...Exclusive Girls Call Mumbai 9910780858 Provide Best And Top Girl Service And ...
Exclusive Girls Call Mumbai 9910780858 Provide Best And Top Girl Service And ...
 
Aluminium-Scaffold-Towers-Industrial-Tower-instruction-manual.pdf
Aluminium-Scaffold-Towers-Industrial-Tower-instruction-manual.pdfAluminium-Scaffold-Towers-Industrial-Tower-instruction-manual.pdf
Aluminium-Scaffold-Towers-Industrial-Tower-instruction-manual.pdf
 
Comprehensive Guide to Hyundai Verna: Price, Features and tips for buying
Comprehensive Guide to Hyundai Verna: Price, Features and tips for buyingComprehensive Guide to Hyundai Verna: Price, Features and tips for buying
Comprehensive Guide to Hyundai Verna: Price, Features and tips for buying
 
Girls Call Kolkata 000XX00000 Provide Best And Top Girl Service And No1 in City
Girls Call Kolkata 000XX00000 Provide Best And Top Girl Service And No1 in CityGirls Call Kolkata 000XX00000 Provide Best And Top Girl Service And No1 in City
Girls Call Kolkata 000XX00000 Provide Best And Top Girl Service And No1 in City
 
What Causes Audi Car Battery Failures Solutions and Maintenance Tips
What Causes Audi Car Battery Failures Solutions and Maintenance TipsWhat Causes Audi Car Battery Failures Solutions and Maintenance Tips
What Causes Audi Car Battery Failures Solutions and Maintenance Tips
 
Girls Call Versova 9910780858 Provide Best And Top Girl Service And No1 in City
Girls Call Versova 9910780858 Provide Best And Top Girl Service And No1 in CityGirls Call Versova 9910780858 Provide Best And Top Girl Service And No1 in City
Girls Call Versova 9910780858 Provide Best And Top Girl Service And No1 in City
 

Caterpillar Cat 120H Motor Grader (Prefix 5FM) Service Repair Manual (5FM00001 and up).pdf

  • 2. Shutdown SIS Previous Screen Product: MOTOR GRADER Model: 120H MOTOR GRADER 5FM Configuration: 120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine Disassembly and Assembly 446 and 446B Backhoe Loaders, Lexion 450 Combine, 3114 and 3116 Engines, IT18F Integrated Toolcarrier, D6M Track-Type Tractor and 928F, 950F and 950G Wheel Loaders Media Number -SENR3611-18 Publication Date -01/05/2009 Date Updated -27/05/2009 i01930426 Camshaft - Remove SMCS - 1210-011 Removal Procedure Start By: a. Remove the governor. Refer to Disassembly and Assembly, "Governor - Remove". b. Remove the side covers. Refer to Disassembly and Assembly, "Lifter Group - Remove and Install". c. Remove the front cover. Refer to Disassembly and Assembly, "Front Cover - Remove". NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. 1/3 120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP... 2020/3/6 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
  • 3. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. Note: For information on reusability of the camshaft, refer to Guideline For Reusable Parts And Salvage Operations, SEBF8097, "Camshaft Measurement", Guideline For Reusable Parts And Salvage Operations, SEBF8146, "Visual Inspection of Camshafts", and Guideline For Reusable Parts And Salvage Operations, SEBF8251, "Specifications for Measurement of Camshafts in 3114/3116 Engines". For information on reusability of the camshaft gear, refer to Guideline For Reusable Parts And Salvage Operations, SEBF8045, "Timing Gears for All Engines". Note: The air compressor was removed in order to accommodate the engine repair stand. Note: It is not necessary to remove the cylinder head for removal of the camshaft. 1. Turn the crankshaft to top center compression stroke for the No. 1 piston. Install the timing bolt in the flywheel. This is for timing during installation. Illustration 1 g01007643 Typical example 2. Ensure that timing mark (1) on the camshaft gear is aligned with timing mark (2) on the idler gear. 2/3 120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP... 2020/3/6 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
  • 4. Illustration 2 g01007645 3. Remove bolts (4) and camshaft retainer plate (6). 4. Remove camshaft gear (5) and camshaft (3) from the cylinder block. Copyright 1993 - 2020 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Fri Mar 6 19:58:06 UTC+0800 2020 3/3 120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP... 2020/3/6 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
  • 5. Shutdown SIS Previous Screen Product: MOTOR GRADER Model: 120H MOTOR GRADER 5FM Configuration: 120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine Disassembly and Assembly 446 and 446B Backhoe Loaders, Lexion 450 Combine, 3114 and 3116 Engines, IT18F Integrated Toolcarrier, D6M Track-Type Tractor and 928F, 950F and 950G Wheel Loaders Media Number -SENR3611-18 Publication Date -01/05/2009 Date Updated -27/05/2009 i01936378 Camshaft - Install SMCS - 1210-012 Installation Procedure NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. Note: For information on reusability of the camshaft, refer to Guideline For Reusable Parts And Salvage Operations, SEBF8097, "Camshaft Measurement", Guideline For Reusable Parts And Salvage Operations, SEBF8146, "Visual Inspection of Camshafts", and Guideline For Reusable Parts And Salvage Operations, SEBF8251, "Specifications for Measurement of Camshafts in 3114/3116 Engines". For information on reusability of the camshaft gear, refer to Guideline For Reusable Parts And Salvage Operations, SEBF8045, "Timing Gears for All Engines". 1. Lubricate the camshaft and the camshaft bearings with clean engine oil. 1/3 120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP... 2020/3/6 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
  • 6. Illustration 1 g01007645 2. Carefully install camshaft (3) and camshaft gear (5) in the engine. NOTICE When installing the camshaft, make sure the number one cylinder is at top center of the compression stroke with the timing bolt installed in the flywheel. The camshaft timing is very important. The timing mark on the camshaft drive gear must line up with the timing mark on the idler gear. Refer to the Specifications Manual for more information. Illustration 2 g01007643 Typical example 3. Ensure that timing mark (1) on the camshaft gear is aligned with timing mark (2) on the idler gear. 2/3 120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP... 2020/3/6 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
  • 7. 4. Install camshaft retainer plate (6) and bolts (4). End By: a. Install the front cover. Refer to Disassembly and Assembly, "Front Cover - Install". b. Install the side cover. Refer to Disassembly and Assembly, "Lifter Group - Remove and Install". c. Install the governor. Refer to Disassembly and Assembly, "Governor - Install". Copyright 1993 - 2020 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Fri Mar 6 19:59:02 UTC+0800 2020 3/3 120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP... 2020/3/6 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
  • 8. Shutdown SIS Previous Screen Product: MOTOR GRADER Model: 120H MOTOR GRADER 5FM Configuration: 120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine Disassembly and Assembly 446 and 446B Backhoe Loaders, Lexion 450 Combine, 3114 and 3116 Engines, IT18F Integrated Toolcarrier, D6M Track-Type Tractor and 928F, 950F and 950G Wheel Loaders Media Number -SENR3611-18 Publication Date -01/05/2009 Date Updated -27/05/2009 i01171077 Camshaft Gear - Remove and Install SMCS - 1210-010-GE Removal Procedure Start By: a. Remove the camshaft. Refer to Disassembly and Assembly, "Camshaft - Remove". Note: For information on reusability of the camshaft gear, refer to Guideline For Reusable Parts And Salvage Operations, SEBF8045, "Timing Gears for All Engines". 1. Wrap the camshaft with a protective covering in order to prevent damage to the camshaft. Illustration 1 g00611152 NOTICE 1/2 120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP... 2020/3/6 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
  • 9. Do not allow the camshaft to fall to the floor when pressing it from the drive gear. Also make sure that the camshaft lobes do not catch on the press plates. 2. Place the camshaft and camshaft gear (1) in a suitable press. Press the camshaft from camshaft gear (1). Installation Procedure Note: For information on reusability of the camshaft gear, refer to Guideline For Reusable Parts And Salvage Operations, SEBF8045, "Timing Gears for All Engines". Illustration 2 g00611152 1. Heat the camshaft gear to a maximum temperature of 315 °C (600 °F). 2. Align the key in the camshaft with the groove (keyway) in the camshaft gear. 3. Install the camshaft gear on the end of the camshaft. End By: a. Install the camshaft. Refer to Disassembly and Assembly, "Camshaft - Install". Copyright 1993 - 2020 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Fri Mar 6 19:59:58 UTC+0800 2020 2/2 120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP... 2020/3/6 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
  • 10. Shutdown SIS Previous Screen Product: MOTOR GRADER Model: 120H MOTOR GRADER 5FM Configuration: 120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine Disassembly and Assembly 446 and 446B Backhoe Loaders, Lexion 450 Combine, 3114 and 3116 Engines, IT18F Integrated Toolcarrier, D6M Track-Type Tractor and 928F, 950F and 950G Wheel Loaders Media Number -SENR3611-18 Publication Date -01/05/2009 Date Updated -27/05/2009 i02183087 Camshaft Bearings - Remove and Install SMCS - 1211-010 Removal Procedure Table 1 Required Tools Tool Part Number Part Description Qty A 8S-2241 Camshaft Bearing Tool Group 1 Start By: a. Remove the camshaft. Refer to Disassembly and Assembly, "Camshaft - Remove". NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers 1/4 120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP... 2020/3/6 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
  • 11. before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. Note: Note the oil hole orientation in each camshaft bearing prior to removal for assembly purposes. 1. Use Tooling (A) to remove the camshaft bearings from the cylinder block. Installation Procedure Table 2 Required Tools Tool Part Number Part Description Qty A 8S-2241 Camshaft Bearing Tool Group 1 NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. 2/4 120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP... 2020/3/6 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
  • 12. Illustration 1 g01104577 3/4 120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP... 2020/3/6 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
  • 13. Illustration 2 g01104579 1. Use Tooling (A) to install all of the camshaft bearings except for the front bearing. Orient oil hole (1) in each bearing so that oil hole (1) is located at the top of the bore. 2. Use Tooling (A) to install the front camshaft bearing. Align oil hole (1) in the front camshaft bearing with the oil hole in the cylinder block. Locate joint (2) in the front camshaft bearing in the proper position. End By: a. Install the camshaft. Refer to Disassembly and Assembly, "Camshaft - Install". Copyright 1993 - 2020 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Fri Mar 6 20:00:53 UTC+0800 2020 4/4 120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP... 2020/3/6 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
  • 14. Shutdown SIS Previous Screen Product: MOTOR GRADER Model: 120H MOTOR GRADER 5FM Configuration: 120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine Disassembly and Assembly 446 and 446B Backhoe Loaders, Lexion 450 Combine, 3114 and 3116 Engines, IT18F Integrated Toolcarrier, D6M Track-Type Tractor and 928F, 950F and 950G Wheel Loaders Media Number -SENR3611-18 Publication Date -01/05/2009 Date Updated -27/05/2009 i01572486 Engine Oil Pan - Remove and Install SMCS - 1302-010 Removal Procedure NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. 1/3 120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP... 2020/3/6 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
  • 15. Illustration 1 g00596538 Note: Drain engine oil into a suitable container for disposal. 1. Remove bolts (1) and the washers that hold engine oil pan (2) to the cylinder block. 2. Remove engine oil pan (2) and the gasket. Use a rubber mallet to tap lightly on engine oil pan (2) if it is necessary. Note: Do not pry on the engine oil pan. Installation Procedure 1. Clean the mating surfaces of the engine oil pan and the cylinder block. Note: Do not put liquid gasket material on the oil pan gasket or on the gasket surface of the engine oil pan. 2. Put the gasket and the engine oil pan (2) in position on the cylinder block. Install bolts (1) and washers. 2/3 120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP... 2020/3/6 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
  • 16. Illustration 2 g00596576 Typical drawing (6 cylinder engine) 3. Tighten four bolts (3). Start with bolt (4) and tighten the remaining bolts in a counterclockwise sequence. 4. Tighten bolts to a torque of 31 ± 3 N·m (23 ± 2 lb ft). 5. Fill the crankcase with engine oil to the proper level. Refer to Operation and Maintenance Manual, "Refill Capacities". Copyright 1993 - 2020 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Fri Mar 6 20:01:49 UTC+0800 2020 3/3 120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP... 2020/3/6 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
  • 17. Shutdown SIS Previous Screen Product: MOTOR GRADER Model: 120H MOTOR GRADER 5FM Configuration: 120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine Disassembly and Assembly 446 and 446B Backhoe Loaders, Lexion 450 Combine, 3114 and 3116 Engines, IT18F Integrated Toolcarrier, D6M Track-Type Tractor and 928F, 950F and 950G Wheel Loaders Media Number -SENR3611-18 Publication Date -01/05/2009 Date Updated -27/05/2009 i01930590 Engine Balancer Shaft - Remove and Install SMCS - 1220-010-JF Removal Procedure Start By: a. Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install". NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. 1/3 120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP... 2020/3/6 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
  • 18. Dispose of all fluids according to local regulations and mandates. Note: The Balancer shafts are used on the 3114 Engines. Illustration 1 g00596194 314 engine 1. Remove oil tube assembly (1). 2. Remove bolts (2) and the washers that hold the balancer group in position. 3. Remove the balancer group and the engine oil pump as a unit. Installation Procedure Illustration 2 g00596364 2/3 120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP... 2020/3/6 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
  • 19. NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. 1. Turn the engine in the counterclockwise direction and place the number one piston at the top center (TC) of the compression stroke. Install the timing bolt in the flywheel housing. 2. Align the timing marks on the balancer gears (3) with oil holes (4) in the engine oil pump. Position the balancer group in the cylinder block. Install the washers and bolts (2). Illustration 3 g00596194 3. Check the condition of the O-ring seals in oil tube assembly (1). Replace the O-ring seal, if necessary. 4. Remove the timing bolt from the flywheel housing. End By: a. Install the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install". Copyright 1993 - 2020 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Fri Mar 6 20:02:45 UTC+0800 2020 3/3 120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP... 2020/3/6 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
  • 20. Thank you very much for your reading. Please Click Here. Then Get COMPLETE MANUAL. NO WAITING NOTE: If there is no response to click on the link above, please download the PDF document first and then click on it.
  • 21. Shutdown SIS Previous Screen Product: MOTOR GRADER Model: 120H MOTOR GRADER 5FM Configuration: 120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine Disassembly and Assembly 446 and 446B Backhoe Loaders, Lexion 450 Combine, 3114 and 3116 Engines, IT18F Integrated Toolcarrier, D6M Track-Type Tractor and 928F, 950F and 950G Wheel Loaders Media Number -SENR3611-18 Publication Date -01/05/2009 Date Updated -27/05/2009 i01411264 Piston Cooling Jets - Remove and Install SMCS - 1331-010 Removal Procedure Start By: a. Remove the engine balancer shaft on the 3114 engines only. Refer to Disassembly and Assembly, "Engine Balancer Shaft - Remove and Install". b. Remove the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Remove". NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. 1/3 120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP... 2020/3/6 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
  • 22. Illustration 1 g00642470 1. Remove bolt (1) and piston cooling jet (2). 2. Remove the remainder of the piston cooling jets. Installation Procedure Illustration 2 g00642470 NOTICE 2/3 120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP... 2020/3/6 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
  • 23. Ensure that the piston cooling jet is seated properly prior to tightening the bolt. 1. Position piston cooling jet (2) in the cylinder block. 2. Ensure that the piston cooling jet is seated properly and install bolt (1) that holds the piston cooling jet in position. NOTICE Hold piston cooling jet in position when the mounting bolt is tightened. If the cooling tube is not held in position, the cooling tube may bend or the cooling tube may break. 3. Install the remainder of the piston cooling jets. End By: a. Install the engine balancer shaft on the 3114 engine. Refer to Disassembly and Assembly, " Engine Balancer Shaft - Remove and Install". b. Install the oil pump. Refer to Disassembly and Assembly, " Engine Oil Pump - Install". Copyright 1993 - 2020 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees. Fri Mar 6 20:03:41 UTC+0800 2020 3/3 120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine(SEBP... 2020/3/6 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...