SlideShare a Scribd company logo
 Main activities: Knowledge transfer between project participants
 Goal: link construction and high-tech industries to enable the development of new or
improved technologies in construction
Construction High-tech industry
Concrete technology
Prefabrication
Formwork production
Design concepts
ICT
Additive manufacturing
Robotics (Automation)
Control systems
 Benefit: new ideas in the interface between the construction and the high-tech industries
Discussion topics within the use of 3D Printing in construction?
 Understand the challenges preventing the uptake of 3DP in construction and suggest
ways to overcome the identified challenges
 Identify areas where 3DP can be more beneficial than traditional construction methods
(balance production cost, time, and added value)
 Possibilities from a design perspective – How and when architects would take advantage of
these technologies?
 Possibilities from a production perspective – How and when are engineers considering the
use of rapid manufacturing when it comes to building construction?
Adapted from: Imprimere AG (http://www.imprimere.org)
BIG 3D-PRINTER 1063
Ex.1)
Ex.2)
HT2C Group on : https://www.linkedin.com/groups/8506380
Thank you for your attention!
Contact: Wilson R. Leal da Silva, Ph.D.
+45 7220 1034
wrls@dti.dk

More Related Content

Viewers also liked

Room 5 - A Deep Dive into IOT Design Challenges Webinar
Room 5 - A Deep Dive into IOT Design Challenges WebinarRoom 5 - A Deep Dive into IOT Design Challenges Webinar
Room 5 - A Deep Dive into IOT Design Challenges Webinar
Pacific Star Communications (PacStar)
 
CD March 2015 - 3DSystems
CD March 2015 - 3DSystemsCD March 2015 - 3DSystems
CD March 2015 - 3DSystems
Comit Projects Ltd
 
Smart Construction Site
Smart Construction SiteSmart Construction Site
Smart Construction Site
CCT International
 
Building Construction and Tech. 3. Responsibilities of participants
Building Construction and Tech. 3. Responsibilities of participantsBuilding Construction and Tech. 3. Responsibilities of participants
Building Construction and Tech. 3. Responsibilities of participants
Hamdija Velagic
 
BIM and trends in construction | Empowering you in a BIM World
BIM and trends in construction | Empowering you in a BIM WorldBIM and trends in construction | Empowering you in a BIM World
BIM and trends in construction | Empowering you in a BIM World
The NBS
 
BIOT Construction - hizliYOL Technology
BIOT Construction - hizliYOL TechnologyBIOT Construction - hizliYOL Technology
BIOT Construction - hizliYOL Technology
Aydin Ozcekic
 
Supporting the digital construction industry | Empowering you in a BIM World
Supporting the digital construction industry | Empowering you in a BIM WorldSupporting the digital construction industry | Empowering you in a BIM World
Supporting the digital construction industry | Empowering you in a BIM World
The NBS
 
London's "Tech Belt" Propels Construction Growth
London's "Tech Belt" Propels Construction GrowthLondon's "Tech Belt" Propels Construction Growth
London's "Tech Belt" Propels Construction Growth
Lukasz Kisiel
 
Construction Technology Trends - MCAA Tech Conference 2015
Construction Technology Trends - MCAA Tech Conference 2015Construction Technology Trends - MCAA Tech Conference 2015
Construction Technology Trends - MCAA Tech Conference 2015
Bridgit
 
Applications of 3D printers in construction industry - Nithin N
Applications of 3D printers in construction industry - Nithin NApplications of 3D printers in construction industry - Nithin N
Applications of 3D printers in construction industry - Nithin N
Nithin N
 
VC Workshop - one day
VC Workshop -  one dayVC Workshop -  one day
VC Workshop - one day
Expara
 
Rana Mansoor Ahmed
Rana Mansoor AhmedRana Mansoor Ahmed
Rana Mansoor Ahmed
Rana Mansoor
 
Presentación sobre autoridad parental univo preespecializacion
Presentación sobre autoridad parental univo preespecializacionPresentación sobre autoridad parental univo preespecializacion
Presentación sobre autoridad parental univo preespecializacion
Ginomomo
 
Kid IT. Юлія Тарасова.
Kid IT. Юлія Тарасова.Kid IT. Юлія Тарасова.
Kid IT. Юлія Тарасова.
innaborysenko
 

Viewers also liked (14)

Room 5 - A Deep Dive into IOT Design Challenges Webinar
Room 5 - A Deep Dive into IOT Design Challenges WebinarRoom 5 - A Deep Dive into IOT Design Challenges Webinar
Room 5 - A Deep Dive into IOT Design Challenges Webinar
 
CD March 2015 - 3DSystems
CD March 2015 - 3DSystemsCD March 2015 - 3DSystems
CD March 2015 - 3DSystems
 
Smart Construction Site
Smart Construction SiteSmart Construction Site
Smart Construction Site
 
Building Construction and Tech. 3. Responsibilities of participants
Building Construction and Tech. 3. Responsibilities of participantsBuilding Construction and Tech. 3. Responsibilities of participants
Building Construction and Tech. 3. Responsibilities of participants
 
BIM and trends in construction | Empowering you in a BIM World
BIM and trends in construction | Empowering you in a BIM WorldBIM and trends in construction | Empowering you in a BIM World
BIM and trends in construction | Empowering you in a BIM World
 
BIOT Construction - hizliYOL Technology
BIOT Construction - hizliYOL TechnologyBIOT Construction - hizliYOL Technology
BIOT Construction - hizliYOL Technology
 
Supporting the digital construction industry | Empowering you in a BIM World
Supporting the digital construction industry | Empowering you in a BIM WorldSupporting the digital construction industry | Empowering you in a BIM World
Supporting the digital construction industry | Empowering you in a BIM World
 
London's "Tech Belt" Propels Construction Growth
London's "Tech Belt" Propels Construction GrowthLondon's "Tech Belt" Propels Construction Growth
London's "Tech Belt" Propels Construction Growth
 
Construction Technology Trends - MCAA Tech Conference 2015
Construction Technology Trends - MCAA Tech Conference 2015Construction Technology Trends - MCAA Tech Conference 2015
Construction Technology Trends - MCAA Tech Conference 2015
 
Applications of 3D printers in construction industry - Nithin N
Applications of 3D printers in construction industry - Nithin NApplications of 3D printers in construction industry - Nithin N
Applications of 3D printers in construction industry - Nithin N
 
VC Workshop - one day
VC Workshop -  one dayVC Workshop -  one day
VC Workshop - one day
 
Rana Mansoor Ahmed
Rana Mansoor AhmedRana Mansoor Ahmed
Rana Mansoor Ahmed
 
Presentación sobre autoridad parental univo preespecializacion
Presentación sobre autoridad parental univo preespecializacionPresentación sobre autoridad parental univo preespecializacion
Presentación sobre autoridad parental univo preespecializacion
 
Kid IT. Юлія Тарасова.
Kid IT. Юлія Тарасова.Kid IT. Юлія Тарасова.
Kid IT. Юлія Тарасова.
 

Recently uploaded

SELENIUM CONF -PALLAVI SHARMA - 2024.pdf
SELENIUM CONF -PALLAVI SHARMA - 2024.pdfSELENIUM CONF -PALLAVI SHARMA - 2024.pdf
SELENIUM CONF -PALLAVI SHARMA - 2024.pdf
Pallavi Sharma
 
OOPS_Lab_Manual - programs using C++ programming language
OOPS_Lab_Manual - programs using C++ programming languageOOPS_Lab_Manual - programs using C++ programming language
OOPS_Lab_Manual - programs using C++ programming language
PreethaV16
 
一比一原版(爱大毕业证书)爱荷华大学毕业证如何办理
一比一原版(爱大毕业证书)爱荷华大学毕业证如何办理一比一原版(爱大毕业证书)爱荷华大学毕业证如何办理
一比一原版(爱大毕业证书)爱荷华大学毕业证如何办理
nedcocy
 
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
Paris Salesforce Developer Group
 
AN INTRODUCTION OF AI & SEARCHING TECHIQUES
AN INTRODUCTION OF AI & SEARCHING TECHIQUESAN INTRODUCTION OF AI & SEARCHING TECHIQUES
AN INTRODUCTION OF AI & SEARCHING TECHIQUES
drshikhapandey2022
 
Properties of Fluids, Fluid Statics, Pressure Measurement
Properties of Fluids, Fluid Statics, Pressure MeasurementProperties of Fluids, Fluid Statics, Pressure Measurement
Properties of Fluids, Fluid Statics, Pressure Measurement
Indrajeet sahu
 
Determination of Equivalent Circuit parameters and performance characteristic...
Determination of Equivalent Circuit parameters and performance characteristic...Determination of Equivalent Circuit parameters and performance characteristic...
Determination of Equivalent Circuit parameters and performance characteristic...
pvpriya2
 
INTRODUCTION TO ARTIFICIAL INTELLIGENCE BASIC
INTRODUCTION TO ARTIFICIAL INTELLIGENCE BASICINTRODUCTION TO ARTIFICIAL INTELLIGENCE BASIC
INTRODUCTION TO ARTIFICIAL INTELLIGENCE BASIC
GOKULKANNANMMECLECTC
 
Unit -II Spectroscopy - EC I B.Tech.pdf
Unit -II Spectroscopy - EC  I B.Tech.pdfUnit -II Spectroscopy - EC  I B.Tech.pdf
Unit -II Spectroscopy - EC I B.Tech.pdf
TeluguBadi
 
309475979-Creativity-Innovation-notes-IV-Sem-2016-pdf.pdf
309475979-Creativity-Innovation-notes-IV-Sem-2016-pdf.pdf309475979-Creativity-Innovation-notes-IV-Sem-2016-pdf.pdf
309475979-Creativity-Innovation-notes-IV-Sem-2016-pdf.pdf
Sou Tibon
 
FUNDAMENTALS OF MECHANICAL ENGINEERING.pdf
FUNDAMENTALS OF MECHANICAL ENGINEERING.pdfFUNDAMENTALS OF MECHANICAL ENGINEERING.pdf
FUNDAMENTALS OF MECHANICAL ENGINEERING.pdf
EMERSON EDUARDO RODRIGUES
 
Asymmetrical Repulsion Magnet Motor Ratio 6-7.pdf
Asymmetrical Repulsion Magnet Motor Ratio 6-7.pdfAsymmetrical Repulsion Magnet Motor Ratio 6-7.pdf
Asymmetrical Repulsion Magnet Motor Ratio 6-7.pdf
felixwold
 
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
Call For Paper -3rd International Conference on Artificial Intelligence Advan...Call For Paper -3rd International Conference on Artificial Intelligence Advan...
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
ijseajournal
 
DELTA V MES EMERSON EDUARDO RODRIGUES ENGINEER
DELTA V MES EMERSON EDUARDO RODRIGUES ENGINEERDELTA V MES EMERSON EDUARDO RODRIGUES ENGINEER
DELTA V MES EMERSON EDUARDO RODRIGUES ENGINEER
EMERSON EDUARDO RODRIGUES
 
Introduction to Artificial Intelligence.
Introduction to Artificial Intelligence.Introduction to Artificial Intelligence.
Introduction to Artificial Intelligence.
supriyaDicholkar1
 
paper relate Chozhavendhan et al. 2020.pdf
paper relate Chozhavendhan et al. 2020.pdfpaper relate Chozhavendhan et al. 2020.pdf
paper relate Chozhavendhan et al. 2020.pdf
ShurooqTaib
 
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
PriyankaKilaniya
 
Sri Guru Hargobind Ji - Bandi Chor Guru.pdf
Sri Guru Hargobind Ji - Bandi Chor Guru.pdfSri Guru Hargobind Ji - Bandi Chor Guru.pdf
Sri Guru Hargobind Ji - Bandi Chor Guru.pdf
Balvir Singh
 
SENTIMENT ANALYSIS ON PPT AND Project template_.pptx
SENTIMENT ANALYSIS ON PPT AND Project template_.pptxSENTIMENT ANALYSIS ON PPT AND Project template_.pptx
SENTIMENT ANALYSIS ON PPT AND Project template_.pptx
b0754201
 
Introduction to Computer Networks & OSI MODEL.ppt
Introduction to Computer Networks & OSI MODEL.pptIntroduction to Computer Networks & OSI MODEL.ppt
Introduction to Computer Networks & OSI MODEL.ppt
Dwarkadas J Sanghvi College of Engineering
 

Recently uploaded (20)

SELENIUM CONF -PALLAVI SHARMA - 2024.pdf
SELENIUM CONF -PALLAVI SHARMA - 2024.pdfSELENIUM CONF -PALLAVI SHARMA - 2024.pdf
SELENIUM CONF -PALLAVI SHARMA - 2024.pdf
 
OOPS_Lab_Manual - programs using C++ programming language
OOPS_Lab_Manual - programs using C++ programming languageOOPS_Lab_Manual - programs using C++ programming language
OOPS_Lab_Manual - programs using C++ programming language
 
一比一原版(爱大毕业证书)爱荷华大学毕业证如何办理
一比一原版(爱大毕业证书)爱荷华大学毕业证如何办理一比一原版(爱大毕业证书)爱荷华大学毕业证如何办理
一比一原版(爱大毕业证书)爱荷华大学毕业证如何办理
 
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
 
AN INTRODUCTION OF AI & SEARCHING TECHIQUES
AN INTRODUCTION OF AI & SEARCHING TECHIQUESAN INTRODUCTION OF AI & SEARCHING TECHIQUES
AN INTRODUCTION OF AI & SEARCHING TECHIQUES
 
Properties of Fluids, Fluid Statics, Pressure Measurement
Properties of Fluids, Fluid Statics, Pressure MeasurementProperties of Fluids, Fluid Statics, Pressure Measurement
Properties of Fluids, Fluid Statics, Pressure Measurement
 
Determination of Equivalent Circuit parameters and performance characteristic...
Determination of Equivalent Circuit parameters and performance characteristic...Determination of Equivalent Circuit parameters and performance characteristic...
Determination of Equivalent Circuit parameters and performance characteristic...
 
INTRODUCTION TO ARTIFICIAL INTELLIGENCE BASIC
INTRODUCTION TO ARTIFICIAL INTELLIGENCE BASICINTRODUCTION TO ARTIFICIAL INTELLIGENCE BASIC
INTRODUCTION TO ARTIFICIAL INTELLIGENCE BASIC
 
Unit -II Spectroscopy - EC I B.Tech.pdf
Unit -II Spectroscopy - EC  I B.Tech.pdfUnit -II Spectroscopy - EC  I B.Tech.pdf
Unit -II Spectroscopy - EC I B.Tech.pdf
 
309475979-Creativity-Innovation-notes-IV-Sem-2016-pdf.pdf
309475979-Creativity-Innovation-notes-IV-Sem-2016-pdf.pdf309475979-Creativity-Innovation-notes-IV-Sem-2016-pdf.pdf
309475979-Creativity-Innovation-notes-IV-Sem-2016-pdf.pdf
 
FUNDAMENTALS OF MECHANICAL ENGINEERING.pdf
FUNDAMENTALS OF MECHANICAL ENGINEERING.pdfFUNDAMENTALS OF MECHANICAL ENGINEERING.pdf
FUNDAMENTALS OF MECHANICAL ENGINEERING.pdf
 
Asymmetrical Repulsion Magnet Motor Ratio 6-7.pdf
Asymmetrical Repulsion Magnet Motor Ratio 6-7.pdfAsymmetrical Repulsion Magnet Motor Ratio 6-7.pdf
Asymmetrical Repulsion Magnet Motor Ratio 6-7.pdf
 
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
Call For Paper -3rd International Conference on Artificial Intelligence Advan...Call For Paper -3rd International Conference on Artificial Intelligence Advan...
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
 
DELTA V MES EMERSON EDUARDO RODRIGUES ENGINEER
DELTA V MES EMERSON EDUARDO RODRIGUES ENGINEERDELTA V MES EMERSON EDUARDO RODRIGUES ENGINEER
DELTA V MES EMERSON EDUARDO RODRIGUES ENGINEER
 
Introduction to Artificial Intelligence.
Introduction to Artificial Intelligence.Introduction to Artificial Intelligence.
Introduction to Artificial Intelligence.
 
paper relate Chozhavendhan et al. 2020.pdf
paper relate Chozhavendhan et al. 2020.pdfpaper relate Chozhavendhan et al. 2020.pdf
paper relate Chozhavendhan et al. 2020.pdf
 
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
 
Sri Guru Hargobind Ji - Bandi Chor Guru.pdf
Sri Guru Hargobind Ji - Bandi Chor Guru.pdfSri Guru Hargobind Ji - Bandi Chor Guru.pdf
Sri Guru Hargobind Ji - Bandi Chor Guru.pdf
 
SENTIMENT ANALYSIS ON PPT AND Project template_.pptx
SENTIMENT ANALYSIS ON PPT AND Project template_.pptxSENTIMENT ANALYSIS ON PPT AND Project template_.pptx
SENTIMENT ANALYSIS ON PPT AND Project template_.pptx
 
Introduction to Computer Networks & OSI MODEL.ppt
Introduction to Computer Networks & OSI MODEL.pptIntroduction to Computer Networks & OSI MODEL.ppt
Introduction to Computer Networks & OSI MODEL.ppt
 

Bridging the gap between Construction, IoT and 3D Printing

  • 1.
  • 2.  Main activities: Knowledge transfer between project participants  Goal: link construction and high-tech industries to enable the development of new or improved technologies in construction Construction High-tech industry Concrete technology Prefabrication Formwork production Design concepts ICT Additive manufacturing Robotics (Automation) Control systems  Benefit: new ideas in the interface between the construction and the high-tech industries
  • 3. Discussion topics within the use of 3D Printing in construction?  Understand the challenges preventing the uptake of 3DP in construction and suggest ways to overcome the identified challenges  Identify areas where 3DP can be more beneficial than traditional construction methods (balance production cost, time, and added value)  Possibilities from a design perspective – How and when architects would take advantage of these technologies?  Possibilities from a production perspective – How and when are engineers considering the use of rapid manufacturing when it comes to building construction?
  • 4. Adapted from: Imprimere AG (http://www.imprimere.org) BIG 3D-PRINTER 1063
  • 7. HT2C Group on : https://www.linkedin.com/groups/8506380
  • 8. Thank you for your attention! Contact: Wilson R. Leal da Silva, Ph.D. +45 7220 1034 wrls@dti.dk