SlideShare a Scribd company logo
ICS 87.020; 91.080.10
Descriptors: Paint coatings, corrosion protection, structural steelwork.
Beschichtungsstoffe – Korrosionsschutz von Stahlbauten durch
Beschichtungssysteme – Teil 5: Beschichtungssysteme
(ISO 12944-5 : 1998)
European Standard EN ISO 12944-5 : 1998 has the status of a DIN Standard.
National foreword
This standard has been published in accordance with a decision taken by CEN/TC 139 to adopt, without
alteration, International Standard ISO 12944-5 as a European Standard.
The responsible German body involved in its preparation was the Normenausschuß Anstrichstoffe und
ähnliche Beschichtungsstoffe (Paints and Varnishes Standards Committee), Technical Committee
Korrosionsschutz von Stahlbauten.
The DIN Standards corresponding to the International Standards referred to in clause 2 of the EN are as
follows:
ISO Standard DIN Standard
ISO 2808 DIN ISO 2808*)
ISO 3549 DIN ISO 3549*)
ISO 4628-1 DIN ISO 4628-1*)
ISO 4628-2 DIN ISO 4628-2*)
ISO 4628-3 DIN ISO 4628-3*)
ISO 4628-4 DIN ISO 4628-4
ISO 4628-5 DIN ISO 4628-5
ISO 4628-6 DIN ISO 4628-6*)
ISO 8503-2 DIN EN ISO 8503-2
ISO 12944-1 DIN EN ISO 12944-1
ISO 12944-2 DIN EN ISO 12944-2
ISO 12944-4 DIN EN ISO 12944-4
ISO 12944-6 DIN EN ISO 12944-6
Ref. No. DIN EN ISO 12944-5 : 1998-07
English price group 13 Sales No. 1113
12.98
DEUTSCHE NORM July 1998
EN ISO 12944-5
{
Continued overleaf.
EN comprises 29 pages.
© No part of this standard may be reproduced without the prior permission of
DIN Deutsches Institut für Normung e.V., Berlin.
Beuth Verlag GmbH, D-10772 Berlin, has the exclusive right of sale for German Standards (DIN-Normen).
Corrosion protection of steel structures by
protective paint systems
Part 5: Protective paint systems (ISO 12944-5 : 1998)
English version of DIN EN ISO 12944-5
Supersedes DIN 55928-5,
May 1991 edition.
*) At present at the stage of draft.
Page 2
DIN EN ISO 12944-5 : 1998-07
Amendments
DIN 55928-5, May 1991 edition, has been superseded by the specifications of EN ISO 12944-5, which is
identical to ISO 12944-5.
Previous edition
DIN 55928: 1956-11, 1959-06x; DIN 55928-5: 1980-03, 1991-05.
National Annex NA
Standards referred to
(and not included in Normative references and Annex ZA)
DIN EN ISO 8503-2 Surface roughness characteristics of blast-cleaned steel substrates – Method for the
grading of surface profile of abrasive blast-cleaned substrates using a comparator
(ISO 8503-2 : 1988)
DIN EN ISO 12944-1 Corrosion protection of steel structures by protective paint systems – Part 1: General
introduction (ISO 12944-1 : 1998)
DIN EN ISO 12944-2 Corrosion protection of steel structures by protective paint systems – Part 2: Classifi-
cation of environments (ISO 12944-2 : 1998)
DIN EN ISO 12944-4 Corrosion protection of steel structures by protective paint systems – Part 4: Types of
surface and surface preparation (ISO 12944-4 : 1998)
DIN EN ISO 12944-6 Corrosion protection of steel structures by protective paint systems – Part 6: Laboratory
performance test methods (ISO 12944-6 : 1998)
English version
ICS 87.020; 91.080.10
Descriptors: Paint coatings, corrosion protection, structural steelwork.
Central Secretariat: rue de Stassart 36, B-1050 Brussels
European Committee for Standardization
Comité Européen de Normalisation
Europäisches Komitee für Normung
Paints and varnishes
Corrosion protection of steel structures by
protective paint systems
Part 5: Protective paint systems
(ISO 12944-5 : 1998)
© 1998. CEN – All rights of exploitation in any form and by any means
reserved worldwide for CEN national members.
Ref. No. EN ISO 12944-5 : 1998 E
Peintures et vernis – Anticorrosion
des structures en acier par systèmes
de peinture – Partie 5: Systèmes de
peinture (ISO 12944-5 : 1998)
Beschichtungsstoffe – Korrosions-
schutz von Stahlbauten durch
Beschichtungssysteme –
Teil 5: Beschichtungssysteme
(ISO 12944-5 : 1998)
This European Standard was approved by CEN on 1997-11-13.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a
national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national stand-
ards may be obtained on application to the Central Secretariat or to any CEN
member.
The European Standards exist in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a
CEN member into its own language and notified to the Central Secretariat has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, the Czech
Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,
Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland,
and the United Kingdom.
ÈÉË
EN ISO 12944-5
May 1998
Page 2
EN ISO 12944-5 : 1998
Foreword
International Standard
ISO 12944-5 : 1998 Paints and varnishes – Corrosion protection of steel structures by protective paint sys-
tems – Part 5: Protective paint systems,
which was prepared by ISO/TC 35 ‘Paints and varnishes’ of the International Organization for Standardization,
has been adopted by Technical Committee CEN/TC 139 ‘Paints and varnishes’, the Secretariat of which is held
by DIN, as a European Standard.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, and conflicting national standards withdrawn, by November 1998 at the latest.
In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the follow-
ing countries are bound to implement this European Standard:
Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,
Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom.
Endorsement notice
The text of the International Standard ISO 12944-5 : 1998 was approved by CEN as a European Standard
without any modification.
NOTE: Normative references to international publications are listed in Annex ZA (normative).
4
4
5
7
9
13
25
28
Page 3
EN ISO 12944-5 : 1998
Page 4
EN ISO 12944-5 : 1998
Page 5
EN ISO 12944-5 : 1998
Page 6
EN ISO 12944-5 : 1998
Page 7
EN ISO 12944-5 : 1998
Page 8
EN ISO 12944-5 : 1998
Page 9
EN ISO 12944-5 : 1998
Page 10
EN ISO 12944-5 : 1998
Page 11
EN ISO 12944-5 : 1998
Page 12
EN ISO 12944-5 : 1998
Page 13
EN ISO 12944-5 : 1998
Page 14
EN ISO 12944-5 : 1998
Page 15
EN ISO 12944-5 : 1998
Page 16
EN ISO 12944-5 : 1998
Page 17
EN ISO 12944-5 : 1998
Page 18
EN ISO 12944-5 : 1998
Page 19
EN ISO 12944-5 : 1998
Page 20
EN ISO 12944-5 : 1998
Page 21
EN ISO 12944-5 : 1998
Page 22
EN ISO 12944-5 : 1998
Page 23
EN ISO 12944-5 : 1998
Page 24
EN ISO 12944-5 : 1998
Page 25
EN ISO 12944-5 : 1998
Page 26
EN ISO 12944-5 : 1998
Page 27
EN ISO 12944-5 : 1998
Page 28
EN ISO 12944-5 : 1998
Page 29
EN ISO 12944-5 : 1998

More Related Content

What's hot

Resume of jaison varkey QA/QC Inspector welding,coating
Resume of jaison varkey QA/QC Inspector welding,coatingResume of jaison varkey QA/QC Inspector welding,coating
Resume of jaison varkey QA/QC Inspector welding,coating
jaison varkey
 
Iso 4624 2002
Iso 4624 2002Iso 4624 2002
Iso 4624 2002
AYM1979
 
Astm a536
Astm a536Astm a536
Asme b31,pressure piping code
Asme b31,pressure piping codeAsme b31,pressure piping code
Asme b31,pressure piping code
Sayed Salah Elsawey
 
Exposicion sobre charla introductoria a la norma aws d1.1
Exposicion sobre charla introductoria a la norma aws d1.1Exposicion sobre charla introductoria a la norma aws d1.1
Exposicion sobre charla introductoria a la norma aws d1.1
Emerson Marcelo Ipiales Gudiño
 
Saes a-206-pmi
Saes a-206-pmiSaes a-206-pmi
Saes a-206-pmi
abhi10apr
 
WELDING PROCESS
WELDING PROCESSWELDING PROCESS
WELDING PROCESS
SK MD RAIJUL HAQUE
 
Understanding cqi9 iss3 (intermediate)
Understanding cqi9 iss3 (intermediate)Understanding cqi9 iss3 (intermediate)
Understanding cqi9 iss3 (intermediate)
Peter Sherwin
 
120288042 acero-a500
120288042 acero-a500120288042 acero-a500
120288042 acero-a500
Andres Leyton
 
CV for Static & Package Equipment Engineer (PMC) - V.M.Rao.
CV for Static & Package Equipment Engineer (PMC) - V.M.Rao.CV for Static & Package Equipment Engineer (PMC) - V.M.Rao.
CV for Static & Package Equipment Engineer (PMC) - V.M.Rao.
Madhava Rao V
 
Piping sample report
Piping sample reportPiping sample report
Piping sample report
ram111eg
 
Curso inspector de soldadura AWS QC1:2007, Instituto Chileno de Soldadura
Curso inspector de soldadura AWS QC1:2007, Instituto Chileno de SoldaduraCurso inspector de soldadura AWS QC1:2007, Instituto Chileno de Soldadura
Curso inspector de soldadura AWS QC1:2007, Instituto Chileno de Soldadura
ALBERTO LEON
 
Presentancion API 510.pdf
Presentancion API 510.pdfPresentancion API 510.pdf
Presentancion API 510.pdf
JuniorMinaya6
 
Como se utiliza la galga de soldadura para fines múltiples
Como se utiliza la galga de soldadura para fines múltiplesComo se utiliza la galga de soldadura para fines múltiples
Como se utiliza la galga de soldadura para fines múltiples
ITCS - Institut Tècnic Català de la Soldadura
 
Trim number chart_api_valve
Trim number chart_api_valveTrim number chart_api_valve
Trim number chart_api_valve
Esteban Mauricio Camargo Gonzalez
 
ISO_12944-5_2018en.pdf
ISO_12944-5_2018en.pdfISO_12944-5_2018en.pdf
ISO_12944-5_2018en.pdf
fayyazdnv
 
TPI - Example Report.
TPI - Example Report.TPI - Example Report.
TPI - Example Report.
Ryan Gillespie
 
Saudi Aramco Typical Inspection Plan (SATIP)
Saudi Aramco Typical Inspection Plan (SATIP)Saudi Aramco Typical Inspection Plan (SATIP)
Saudi Aramco Typical Inspection Plan (SATIP)
ROBERTO BATAHOY GAMALE JR
 
Norma en iso 8501
Norma en iso 8501Norma en iso 8501
Norma en iso 8501
Heriberto Yau
 
TS EN 1991 1-4 (Eurocode 1-4)
TS EN 1991 1-4 (Eurocode 1-4)TS EN 1991 1-4 (Eurocode 1-4)
TS EN 1991 1-4 (Eurocode 1-4)
Yusuf Yıldız
 

What's hot (20)

Resume of jaison varkey QA/QC Inspector welding,coating
Resume of jaison varkey QA/QC Inspector welding,coatingResume of jaison varkey QA/QC Inspector welding,coating
Resume of jaison varkey QA/QC Inspector welding,coating
 
Iso 4624 2002
Iso 4624 2002Iso 4624 2002
Iso 4624 2002
 
Astm a536
Astm a536Astm a536
Astm a536
 
Asme b31,pressure piping code
Asme b31,pressure piping codeAsme b31,pressure piping code
Asme b31,pressure piping code
 
Exposicion sobre charla introductoria a la norma aws d1.1
Exposicion sobre charla introductoria a la norma aws d1.1Exposicion sobre charla introductoria a la norma aws d1.1
Exposicion sobre charla introductoria a la norma aws d1.1
 
Saes a-206-pmi
Saes a-206-pmiSaes a-206-pmi
Saes a-206-pmi
 
WELDING PROCESS
WELDING PROCESSWELDING PROCESS
WELDING PROCESS
 
Understanding cqi9 iss3 (intermediate)
Understanding cqi9 iss3 (intermediate)Understanding cqi9 iss3 (intermediate)
Understanding cqi9 iss3 (intermediate)
 
120288042 acero-a500
120288042 acero-a500120288042 acero-a500
120288042 acero-a500
 
CV for Static & Package Equipment Engineer (PMC) - V.M.Rao.
CV for Static & Package Equipment Engineer (PMC) - V.M.Rao.CV for Static & Package Equipment Engineer (PMC) - V.M.Rao.
CV for Static & Package Equipment Engineer (PMC) - V.M.Rao.
 
Piping sample report
Piping sample reportPiping sample report
Piping sample report
 
Curso inspector de soldadura AWS QC1:2007, Instituto Chileno de Soldadura
Curso inspector de soldadura AWS QC1:2007, Instituto Chileno de SoldaduraCurso inspector de soldadura AWS QC1:2007, Instituto Chileno de Soldadura
Curso inspector de soldadura AWS QC1:2007, Instituto Chileno de Soldadura
 
Presentancion API 510.pdf
Presentancion API 510.pdfPresentancion API 510.pdf
Presentancion API 510.pdf
 
Como se utiliza la galga de soldadura para fines múltiples
Como se utiliza la galga de soldadura para fines múltiplesComo se utiliza la galga de soldadura para fines múltiples
Como se utiliza la galga de soldadura para fines múltiples
 
Trim number chart_api_valve
Trim number chart_api_valveTrim number chart_api_valve
Trim number chart_api_valve
 
ISO_12944-5_2018en.pdf
ISO_12944-5_2018en.pdfISO_12944-5_2018en.pdf
ISO_12944-5_2018en.pdf
 
TPI - Example Report.
TPI - Example Report.TPI - Example Report.
TPI - Example Report.
 
Saudi Aramco Typical Inspection Plan (SATIP)
Saudi Aramco Typical Inspection Plan (SATIP)Saudi Aramco Typical Inspection Plan (SATIP)
Saudi Aramco Typical Inspection Plan (SATIP)
 
Norma en iso 8501
Norma en iso 8501Norma en iso 8501
Norma en iso 8501
 
TS EN 1991 1-4 (Eurocode 1-4)
TS EN 1991 1-4 (Eurocode 1-4)TS EN 1991 1-4 (Eurocode 1-4)
TS EN 1991 1-4 (Eurocode 1-4)
 

Viewers also liked

ISO 12944_A4 leaflet_EN (2)
ISO 12944_A4 leaflet_EN (2)ISO 12944_A4 leaflet_EN (2)
ISO 12944_A4 leaflet_EN (2)
ZINGA MBL Ela Bloch
 
Juan 2015
Juan 2015Juan 2015
Juan 2015
Kendall Smith
 
Incoterms 2010
Incoterms 2010Incoterms 2010
Incoterms 2010
Jontxu Pardo
 
Residuos o desechos tecnológicos
Residuos o desechos tecnológicosResiduos o desechos tecnológicos
Residuos o desechos tecnológicos
michael940721
 
Metais na construção civil: corrosão e proteção
Metais na construção civil: corrosão e proteçãoMetais na construção civil: corrosão e proteção
Metais na construção civil: corrosão e proteção
Adriana de Araujo
 
Coatings standards-and
Coatings standards-andCoatings standards-and
Coatings standards-and
Hector Joaquin Andino Banegas
 

Viewers also liked (6)

ISO 12944_A4 leaflet_EN (2)
ISO 12944_A4 leaflet_EN (2)ISO 12944_A4 leaflet_EN (2)
ISO 12944_A4 leaflet_EN (2)
 
Juan 2015
Juan 2015Juan 2015
Juan 2015
 
Incoterms 2010
Incoterms 2010Incoterms 2010
Incoterms 2010
 
Residuos o desechos tecnológicos
Residuos o desechos tecnológicosResiduos o desechos tecnológicos
Residuos o desechos tecnológicos
 
Metais na construção civil: corrosão e proteção
Metais na construção civil: corrosão e proteçãoMetais na construção civil: corrosão e proteção
Metais na construção civil: corrosão e proteção
 
Coatings standards-and
Coatings standards-andCoatings standards-and
Coatings standards-and
 

Similar to 171128003 iso-12944-pdf

Bs en933-2
Bs en933-2Bs en933-2
Bs en933-2
hsaam hsaam
 
BS EN 01337-2-2004 (2006).pdf
BS EN 01337-2-2004 (2006).pdfBS EN 01337-2-2004 (2006).pdf
BS EN 01337-2-2004 (2006).pdf
AhmedAlzubaidi11
 
Eu 10293 2005
Eu 10293  2005Eu 10293  2005
Eu 10293 2005
Joe Plunger
 
Bs en 12068 - 1999
Bs en 12068 - 1999Bs en 12068 - 1999
Bs en 12068 - 1999
Patricio Arrien
 
steels-for-quenching-and-tempering-din-en-10083-3-2007.pdf
steels-for-quenching-and-tempering-din-en-10083-3-2007.pdfsteels-for-quenching-and-tempering-din-en-10083-3-2007.pdf
steels-for-quenching-and-tempering-din-en-10083-3-2007.pdf
walkson1
 
Bs en 28510 1-1993--[2015-05-12--11-42-31 pm]
Bs en 28510 1-1993--[2015-05-12--11-42-31 pm]Bs en 28510 1-1993--[2015-05-12--11-42-31 pm]
Bs en 28510 1-1993--[2015-05-12--11-42-31 pm]
Chemist Sayed
 
Bs en iso iec 17025 2017
Bs en iso iec 17025 2017Bs en iso iec 17025 2017
Bs en iso iec 17025 2017
FOQAcademy
 
BS EN 01337-1-2000.pdf
BS EN 01337-1-2000.pdfBS EN 01337-1-2000.pdf
BS EN 01337-1-2000.pdf
AhmedAlzubaidi11
 
ISO - 17020 - 2012 - LE - Insp Bodies.pdf
ISO - 17020 - 2012 - LE - Insp Bodies.pdfISO - 17020 - 2012 - LE - Insp Bodies.pdf
ISO - 17020 - 2012 - LE - Insp Bodies.pdf
Ivan Martis
 
Bsi bs en_iso_9692-1_welding_and_allied_processes_recommendations_for_joint_p...
Bsi bs en_iso_9692-1_welding_and_allied_processes_recommendations_for_joint_p...Bsi bs en_iso_9692-1_welding_and_allied_processes_recommendations_for_joint_p...
Bsi bs en_iso_9692-1_welding_and_allied_processes_recommendations_for_joint_p...
Kirill Ponomarenko
 
NORSOK STANDARD_L-005.docx
NORSOK STANDARD_L-005.docxNORSOK STANDARD_L-005.docx
NORSOK STANDARD_L-005.docx
KCMSpecialSteel
 
testing_cementi.pdf
testing_cementi.pdftesting_cementi.pdf
testing_cementi.pdf
hambadah
 
Bs en 364_1993-personal protective equipment against falls from a height- tes...
Bs en 364_1993-personal protective equipment against falls from a height- tes...Bs en 364_1993-personal protective equipment against falls from a height- tes...
Bs en 364_1993-personal protective equipment against falls from a height- tes...
Rajneesh Pankaj
 
Iso ts 20 - 16949-2009 white paper
Iso ts 20 - 16949-2009 white paperIso ts 20 - 16949-2009 white paper
Iso ts 20 - 16949-2009 white paper
Lakshy Management Consultant Pvt Ltd
 
ISO-8502-4-2017.pdf
ISO-8502-4-2017.pdfISO-8502-4-2017.pdf
ISO-8502-4-2017.pdf
MiguelHerte
 
Julfer fire standards for fire doors 2011
Julfer   fire standards for fire doors 2011Julfer   fire standards for fire doors 2011
Julfer fire standards for fire doors 2011
José Francisco Alfaya Toucedo
 
NORMA ISO 4019 2001
NORMA ISO 4019 2001NORMA ISO 4019 2001
NORMA ISO 4019 2001
Jefferson_Melo
 
I.s.en1997 1-2004+a1-2013
I.s.en1997 1-2004+a1-2013I.s.en1997 1-2004+a1-2013
I.s.en1997 1-2004+a1-2013
hsaam hsaam
 
123457604878961544554887555bs-en1436.pdf
123457604878961544554887555bs-en1436.pdf123457604878961544554887555bs-en1436.pdf
123457604878961544554887555bs-en1436.pdf
EHammamElMissiry
 
Bs en 1555 2-2010
Bs en 1555 2-2010Bs en 1555 2-2010
Bs en 1555 2-2010
Marcos Arbiza
 

Similar to 171128003 iso-12944-pdf (20)

Bs en933-2
Bs en933-2Bs en933-2
Bs en933-2
 
BS EN 01337-2-2004 (2006).pdf
BS EN 01337-2-2004 (2006).pdfBS EN 01337-2-2004 (2006).pdf
BS EN 01337-2-2004 (2006).pdf
 
Eu 10293 2005
Eu 10293  2005Eu 10293  2005
Eu 10293 2005
 
Bs en 12068 - 1999
Bs en 12068 - 1999Bs en 12068 - 1999
Bs en 12068 - 1999
 
steels-for-quenching-and-tempering-din-en-10083-3-2007.pdf
steels-for-quenching-and-tempering-din-en-10083-3-2007.pdfsteels-for-quenching-and-tempering-din-en-10083-3-2007.pdf
steels-for-quenching-and-tempering-din-en-10083-3-2007.pdf
 
Bs en 28510 1-1993--[2015-05-12--11-42-31 pm]
Bs en 28510 1-1993--[2015-05-12--11-42-31 pm]Bs en 28510 1-1993--[2015-05-12--11-42-31 pm]
Bs en 28510 1-1993--[2015-05-12--11-42-31 pm]
 
Bs en iso iec 17025 2017
Bs en iso iec 17025 2017Bs en iso iec 17025 2017
Bs en iso iec 17025 2017
 
BS EN 01337-1-2000.pdf
BS EN 01337-1-2000.pdfBS EN 01337-1-2000.pdf
BS EN 01337-1-2000.pdf
 
ISO - 17020 - 2012 - LE - Insp Bodies.pdf
ISO - 17020 - 2012 - LE - Insp Bodies.pdfISO - 17020 - 2012 - LE - Insp Bodies.pdf
ISO - 17020 - 2012 - LE - Insp Bodies.pdf
 
Bsi bs en_iso_9692-1_welding_and_allied_processes_recommendations_for_joint_p...
Bsi bs en_iso_9692-1_welding_and_allied_processes_recommendations_for_joint_p...Bsi bs en_iso_9692-1_welding_and_allied_processes_recommendations_for_joint_p...
Bsi bs en_iso_9692-1_welding_and_allied_processes_recommendations_for_joint_p...
 
NORSOK STANDARD_L-005.docx
NORSOK STANDARD_L-005.docxNORSOK STANDARD_L-005.docx
NORSOK STANDARD_L-005.docx
 
testing_cementi.pdf
testing_cementi.pdftesting_cementi.pdf
testing_cementi.pdf
 
Bs en 364_1993-personal protective equipment against falls from a height- tes...
Bs en 364_1993-personal protective equipment against falls from a height- tes...Bs en 364_1993-personal protective equipment against falls from a height- tes...
Bs en 364_1993-personal protective equipment against falls from a height- tes...
 
Iso ts 20 - 16949-2009 white paper
Iso ts 20 - 16949-2009 white paperIso ts 20 - 16949-2009 white paper
Iso ts 20 - 16949-2009 white paper
 
ISO-8502-4-2017.pdf
ISO-8502-4-2017.pdfISO-8502-4-2017.pdf
ISO-8502-4-2017.pdf
 
Julfer fire standards for fire doors 2011
Julfer   fire standards for fire doors 2011Julfer   fire standards for fire doors 2011
Julfer fire standards for fire doors 2011
 
NORMA ISO 4019 2001
NORMA ISO 4019 2001NORMA ISO 4019 2001
NORMA ISO 4019 2001
 
I.s.en1997 1-2004+a1-2013
I.s.en1997 1-2004+a1-2013I.s.en1997 1-2004+a1-2013
I.s.en1997 1-2004+a1-2013
 
123457604878961544554887555bs-en1436.pdf
123457604878961544554887555bs-en1436.pdf123457604878961544554887555bs-en1436.pdf
123457604878961544554887555bs-en1436.pdf
 
Bs en 1555 2-2010
Bs en 1555 2-2010Bs en 1555 2-2010
Bs en 1555 2-2010
 

Recently uploaded

Design and Analysis of Algorithms-DP,Backtracking,Graphs,B&B
Design and Analysis of Algorithms-DP,Backtracking,Graphs,B&BDesign and Analysis of Algorithms-DP,Backtracking,Graphs,B&B
Design and Analysis of Algorithms-DP,Backtracking,Graphs,B&B
Sreedhar Chowdam
 
digital fundamental by Thomas L.floydl.pdf
digital fundamental by Thomas L.floydl.pdfdigital fundamental by Thomas L.floydl.pdf
digital fundamental by Thomas L.floydl.pdf
drwaing
 
Tutorial for 16S rRNA Gene Analysis with QIIME2.pdf
Tutorial for 16S rRNA Gene Analysis with QIIME2.pdfTutorial for 16S rRNA Gene Analysis with QIIME2.pdf
Tutorial for 16S rRNA Gene Analysis with QIIME2.pdf
aqil azizi
 
PROJECT FORMAT FOR EVS AMITY UNIVERSITY GWALIOR.ppt
PROJECT FORMAT FOR EVS AMITY UNIVERSITY GWALIOR.pptPROJECT FORMAT FOR EVS AMITY UNIVERSITY GWALIOR.ppt
PROJECT FORMAT FOR EVS AMITY UNIVERSITY GWALIOR.ppt
bhadouriyakaku
 
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
awadeshbabu
 
This is my Environmental physics presentation
This is my Environmental physics presentationThis is my Environmental physics presentation
This is my Environmental physics presentation
ZainabHashmi17
 
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
insn4465
 
Heap Sort (SS).ppt FOR ENGINEERING GRADUATES, BCA, MCA, MTECH, BSC STUDENTS
Heap Sort (SS).ppt FOR ENGINEERING GRADUATES, BCA, MCA, MTECH, BSC STUDENTSHeap Sort (SS).ppt FOR ENGINEERING GRADUATES, BCA, MCA, MTECH, BSC STUDENTS
Heap Sort (SS).ppt FOR ENGINEERING GRADUATES, BCA, MCA, MTECH, BSC STUDENTS
Soumen Santra
 
一比一原版(UC Berkeley毕业证)加利福尼亚大学|伯克利分校毕业证成绩单专业办理
一比一原版(UC Berkeley毕业证)加利福尼亚大学|伯克利分校毕业证成绩单专业办理一比一原版(UC Berkeley毕业证)加利福尼亚大学|伯克利分校毕业证成绩单专业办理
一比一原版(UC Berkeley毕业证)加利福尼亚大学|伯克利分校毕业证成绩单专业办理
skuxot
 
一比一原版(IIT毕业证)伊利诺伊理工大学毕业证成绩单专业办理
一比一原版(IIT毕业证)伊利诺伊理工大学毕业证成绩单专业办理一比一原版(IIT毕业证)伊利诺伊理工大学毕业证成绩单专业办理
一比一原版(IIT毕业证)伊利诺伊理工大学毕业证成绩单专业办理
zwunae
 
New techniques for characterising damage in rock slopes.pdf
New techniques for characterising damage in rock slopes.pdfNew techniques for characterising damage in rock slopes.pdf
New techniques for characterising damage in rock slopes.pdf
wisnuprabawa3
 
14 Template Contractual Notice - EOT Application
14 Template Contractual Notice - EOT Application14 Template Contractual Notice - EOT Application
14 Template Contractual Notice - EOT Application
SyedAbiiAzazi1
 
Swimming pool mechanical components design.pptx
Swimming pool  mechanical components design.pptxSwimming pool  mechanical components design.pptx
Swimming pool mechanical components design.pptx
yokeleetan1
 
Recycled Concrete Aggregate in Construction Part III
Recycled Concrete Aggregate in Construction Part IIIRecycled Concrete Aggregate in Construction Part III
Recycled Concrete Aggregate in Construction Part III
Aditya Rajan Patra
 
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of contentGenerative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
Hitesh Mohapatra
 
A review on techniques and modelling methodologies used for checking electrom...
A review on techniques and modelling methodologies used for checking electrom...A review on techniques and modelling methodologies used for checking electrom...
A review on techniques and modelling methodologies used for checking electrom...
nooriasukmaningtyas
 
在线办理(ANU毕业证书)澳洲国立大学毕业证录取通知书一模一样
在线办理(ANU毕业证书)澳洲国立大学毕业证录取通知书一模一样在线办理(ANU毕业证书)澳洲国立大学毕业证录取通知书一模一样
在线办理(ANU毕业证书)澳洲国立大学毕业证录取通知书一模一样
obonagu
 
PPT on GRP pipes manufacturing and testing
PPT on GRP pipes manufacturing and testingPPT on GRP pipes manufacturing and testing
PPT on GRP pipes manufacturing and testing
anoopmanoharan2
 
22CYT12-Unit-V-E Waste and its Management.ppt
22CYT12-Unit-V-E Waste and its Management.ppt22CYT12-Unit-V-E Waste and its Management.ppt
22CYT12-Unit-V-E Waste and its Management.ppt
KrishnaveniKrishnara1
 
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
IJECEIAES
 

Recently uploaded (20)

Design and Analysis of Algorithms-DP,Backtracking,Graphs,B&B
Design and Analysis of Algorithms-DP,Backtracking,Graphs,B&BDesign and Analysis of Algorithms-DP,Backtracking,Graphs,B&B
Design and Analysis of Algorithms-DP,Backtracking,Graphs,B&B
 
digital fundamental by Thomas L.floydl.pdf
digital fundamental by Thomas L.floydl.pdfdigital fundamental by Thomas L.floydl.pdf
digital fundamental by Thomas L.floydl.pdf
 
Tutorial for 16S rRNA Gene Analysis with QIIME2.pdf
Tutorial for 16S rRNA Gene Analysis with QIIME2.pdfTutorial for 16S rRNA Gene Analysis with QIIME2.pdf
Tutorial for 16S rRNA Gene Analysis with QIIME2.pdf
 
PROJECT FORMAT FOR EVS AMITY UNIVERSITY GWALIOR.ppt
PROJECT FORMAT FOR EVS AMITY UNIVERSITY GWALIOR.pptPROJECT FORMAT FOR EVS AMITY UNIVERSITY GWALIOR.ppt
PROJECT FORMAT FOR EVS AMITY UNIVERSITY GWALIOR.ppt
 
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
 
This is my Environmental physics presentation
This is my Environmental physics presentationThis is my Environmental physics presentation
This is my Environmental physics presentation
 
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
 
Heap Sort (SS).ppt FOR ENGINEERING GRADUATES, BCA, MCA, MTECH, BSC STUDENTS
Heap Sort (SS).ppt FOR ENGINEERING GRADUATES, BCA, MCA, MTECH, BSC STUDENTSHeap Sort (SS).ppt FOR ENGINEERING GRADUATES, BCA, MCA, MTECH, BSC STUDENTS
Heap Sort (SS).ppt FOR ENGINEERING GRADUATES, BCA, MCA, MTECH, BSC STUDENTS
 
一比一原版(UC Berkeley毕业证)加利福尼亚大学|伯克利分校毕业证成绩单专业办理
一比一原版(UC Berkeley毕业证)加利福尼亚大学|伯克利分校毕业证成绩单专业办理一比一原版(UC Berkeley毕业证)加利福尼亚大学|伯克利分校毕业证成绩单专业办理
一比一原版(UC Berkeley毕业证)加利福尼亚大学|伯克利分校毕业证成绩单专业办理
 
一比一原版(IIT毕业证)伊利诺伊理工大学毕业证成绩单专业办理
一比一原版(IIT毕业证)伊利诺伊理工大学毕业证成绩单专业办理一比一原版(IIT毕业证)伊利诺伊理工大学毕业证成绩单专业办理
一比一原版(IIT毕业证)伊利诺伊理工大学毕业证成绩单专业办理
 
New techniques for characterising damage in rock slopes.pdf
New techniques for characterising damage in rock slopes.pdfNew techniques for characterising damage in rock slopes.pdf
New techniques for characterising damage in rock slopes.pdf
 
14 Template Contractual Notice - EOT Application
14 Template Contractual Notice - EOT Application14 Template Contractual Notice - EOT Application
14 Template Contractual Notice - EOT Application
 
Swimming pool mechanical components design.pptx
Swimming pool  mechanical components design.pptxSwimming pool  mechanical components design.pptx
Swimming pool mechanical components design.pptx
 
Recycled Concrete Aggregate in Construction Part III
Recycled Concrete Aggregate in Construction Part IIIRecycled Concrete Aggregate in Construction Part III
Recycled Concrete Aggregate in Construction Part III
 
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of contentGenerative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
 
A review on techniques and modelling methodologies used for checking electrom...
A review on techniques and modelling methodologies used for checking electrom...A review on techniques and modelling methodologies used for checking electrom...
A review on techniques and modelling methodologies used for checking electrom...
 
在线办理(ANU毕业证书)澳洲国立大学毕业证录取通知书一模一样
在线办理(ANU毕业证书)澳洲国立大学毕业证录取通知书一模一样在线办理(ANU毕业证书)澳洲国立大学毕业证录取通知书一模一样
在线办理(ANU毕业证书)澳洲国立大学毕业证录取通知书一模一样
 
PPT on GRP pipes manufacturing and testing
PPT on GRP pipes manufacturing and testingPPT on GRP pipes manufacturing and testing
PPT on GRP pipes manufacturing and testing
 
22CYT12-Unit-V-E Waste and its Management.ppt
22CYT12-Unit-V-E Waste and its Management.ppt22CYT12-Unit-V-E Waste and its Management.ppt
22CYT12-Unit-V-E Waste and its Management.ppt
 
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
 

171128003 iso-12944-pdf

  • 1. ICS 87.020; 91.080.10 Descriptors: Paint coatings, corrosion protection, structural steelwork. Beschichtungsstoffe – Korrosionsschutz von Stahlbauten durch Beschichtungssysteme – Teil 5: Beschichtungssysteme (ISO 12944-5 : 1998) European Standard EN ISO 12944-5 : 1998 has the status of a DIN Standard. National foreword This standard has been published in accordance with a decision taken by CEN/TC 139 to adopt, without alteration, International Standard ISO 12944-5 as a European Standard. The responsible German body involved in its preparation was the Normenausschuß Anstrichstoffe und ähnliche Beschichtungsstoffe (Paints and Varnishes Standards Committee), Technical Committee Korrosionsschutz von Stahlbauten. The DIN Standards corresponding to the International Standards referred to in clause 2 of the EN are as follows: ISO Standard DIN Standard ISO 2808 DIN ISO 2808*) ISO 3549 DIN ISO 3549*) ISO 4628-1 DIN ISO 4628-1*) ISO 4628-2 DIN ISO 4628-2*) ISO 4628-3 DIN ISO 4628-3*) ISO 4628-4 DIN ISO 4628-4 ISO 4628-5 DIN ISO 4628-5 ISO 4628-6 DIN ISO 4628-6*) ISO 8503-2 DIN EN ISO 8503-2 ISO 12944-1 DIN EN ISO 12944-1 ISO 12944-2 DIN EN ISO 12944-2 ISO 12944-4 DIN EN ISO 12944-4 ISO 12944-6 DIN EN ISO 12944-6 Ref. No. DIN EN ISO 12944-5 : 1998-07 English price group 13 Sales No. 1113 12.98 DEUTSCHE NORM July 1998 EN ISO 12944-5 { Continued overleaf. EN comprises 29 pages. © No part of this standard may be reproduced without the prior permission of DIN Deutsches Institut für Normung e.V., Berlin. Beuth Verlag GmbH, D-10772 Berlin, has the exclusive right of sale for German Standards (DIN-Normen). Corrosion protection of steel structures by protective paint systems Part 5: Protective paint systems (ISO 12944-5 : 1998) English version of DIN EN ISO 12944-5 Supersedes DIN 55928-5, May 1991 edition. *) At present at the stage of draft.
  • 2. Page 2 DIN EN ISO 12944-5 : 1998-07 Amendments DIN 55928-5, May 1991 edition, has been superseded by the specifications of EN ISO 12944-5, which is identical to ISO 12944-5. Previous edition DIN 55928: 1956-11, 1959-06x; DIN 55928-5: 1980-03, 1991-05. National Annex NA Standards referred to (and not included in Normative references and Annex ZA) DIN EN ISO 8503-2 Surface roughness characteristics of blast-cleaned steel substrates – Method for the grading of surface profile of abrasive blast-cleaned substrates using a comparator (ISO 8503-2 : 1988) DIN EN ISO 12944-1 Corrosion protection of steel structures by protective paint systems – Part 1: General introduction (ISO 12944-1 : 1998) DIN EN ISO 12944-2 Corrosion protection of steel structures by protective paint systems – Part 2: Classifi- cation of environments (ISO 12944-2 : 1998) DIN EN ISO 12944-4 Corrosion protection of steel structures by protective paint systems – Part 4: Types of surface and surface preparation (ISO 12944-4 : 1998) DIN EN ISO 12944-6 Corrosion protection of steel structures by protective paint systems – Part 6: Laboratory performance test methods (ISO 12944-6 : 1998)
  • 3. English version ICS 87.020; 91.080.10 Descriptors: Paint coatings, corrosion protection, structural steelwork. Central Secretariat: rue de Stassart 36, B-1050 Brussels European Committee for Standardization Comité Européen de Normalisation Europäisches Komitee für Normung Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 5: Protective paint systems (ISO 12944-5 : 1998) © 1998. CEN – All rights of exploitation in any form and by any means reserved worldwide for CEN national members. Ref. No. EN ISO 12944-5 : 1998 E Peintures et vernis – Anticorrosion des structures en acier par systèmes de peinture – Partie 5: Systèmes de peinture (ISO 12944-5 : 1998) Beschichtungsstoffe – Korrosions- schutz von Stahlbauten durch Beschichtungssysteme – Teil 5: Beschichtungssysteme (ISO 12944-5 : 1998) This European Standard was approved by CEN on 1997-11-13. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national stand- ards may be obtained on application to the Central Secretariat or to any CEN member. The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom. ÈÉË EN ISO 12944-5 May 1998
  • 4. Page 2 EN ISO 12944-5 : 1998 Foreword International Standard ISO 12944-5 : 1998 Paints and varnishes – Corrosion protection of steel structures by protective paint sys- tems – Part 5: Protective paint systems, which was prepared by ISO/TC 35 ‘Paints and varnishes’ of the International Organization for Standardization, has been adopted by Technical Committee CEN/TC 139 ‘Paints and varnishes’, the Secretariat of which is held by DIN, as a European Standard. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, and conflicting national standards withdrawn, by November 1998 at the latest. In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the follow- ing countries are bound to implement this European Standard: Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom. Endorsement notice The text of the International Standard ISO 12944-5 : 1998 was approved by CEN as a European Standard without any modification. NOTE: Normative references to international publications are listed in Annex ZA (normative). 4 4 5 7 9 13 25 28
  • 5. Page 3 EN ISO 12944-5 : 1998
  • 6. Page 4 EN ISO 12944-5 : 1998
  • 7. Page 5 EN ISO 12944-5 : 1998
  • 8. Page 6 EN ISO 12944-5 : 1998
  • 9. Page 7 EN ISO 12944-5 : 1998
  • 10. Page 8 EN ISO 12944-5 : 1998
  • 11. Page 9 EN ISO 12944-5 : 1998
  • 12. Page 10 EN ISO 12944-5 : 1998
  • 13. Page 11 EN ISO 12944-5 : 1998
  • 14. Page 12 EN ISO 12944-5 : 1998
  • 15. Page 13 EN ISO 12944-5 : 1998
  • 16. Page 14 EN ISO 12944-5 : 1998
  • 17. Page 15 EN ISO 12944-5 : 1998
  • 18. Page 16 EN ISO 12944-5 : 1998
  • 19. Page 17 EN ISO 12944-5 : 1998
  • 20. Page 18 EN ISO 12944-5 : 1998
  • 21. Page 19 EN ISO 12944-5 : 1998
  • 22. Page 20 EN ISO 12944-5 : 1998
  • 23. Page 21 EN ISO 12944-5 : 1998
  • 24. Page 22 EN ISO 12944-5 : 1998
  • 25. Page 23 EN ISO 12944-5 : 1998
  • 26. Page 24 EN ISO 12944-5 : 1998
  • 27. Page 25 EN ISO 12944-5 : 1998
  • 28. Page 26 EN ISO 12944-5 : 1998
  • 29. Page 27 EN ISO 12944-5 : 1998
  • 30. Page 28 EN ISO 12944-5 : 1998
  • 31. Page 29 EN ISO 12944-5 : 1998